Preview only show first 10 pages with watermark. For full document please download

Flp-acu-9061

   EMBED


Share

Transcript

Portable Sound System FLP-ACU-9061 Automatic Changeover Unit Mixer Amp/ Pre Amp/ Power Amp The ACU-9061 Automatic Changeover Unit provides monitoring and surveillance functions for your power amplifier units. It monitors for faults and implements automatic changeover capability to backup up to 6 amplifier units. This unit ensures a continuous and uninterrupted broadcast of BGM or emergency message in a PA system. Changeover is performed at both input and output sections, making it suitable for application in a matrix system. At any one time, only a failed duty unit shall be replaced by a standby amplifier to avoid overloading. When it is cascaded, the ACU-9061’s applications could be expanded to cover more than 6 amplifiers at one go. To foster a more reliable changeover process, a microcontroller based signal processor is used to implement individual input source and output detection for amplifiers. If two amplifiers failed at one time, changeover will be implemented for the unit with the higher priority. Product Features • Cater for 6 duty amplifiers and 1 standby amplifier • High sensitivity and accurate fault detection function, less than 2 seconds for changeover time • Expandable for 1 standby to cater more than 6 duty amplifiers • 6-channel audio source volume controls • Built-in microcomputer detection system to realize auto amplifier fault changeover • Overloading protection by allowing only a single take over • LED indicator and switchable buzzer interface for fault alert Specifications Power 220 – 240 V AC 50-60 Hz Paging Microphone & Zone selector Power Consumption 10W Input Impedance 10k Ohm Detection Line 70 / 100V Detection Level 50 Vrms min Load Rating 1000W / 100V Indicators Green LED for Main Channel Red LED for Changeover Status of Indicators Channel Working: ON Waiting for Changeover: OFF Changeover: FLASH Alert: Dimension (W x D x H) Switchable buzzer 484mm x 370mm x 88mm Weight 4 kg Finish Black Connect to Pre-amp Connect to Power-amp Rack mount equipment Power Amp Input To Speaker Zone 1-6 22 Standby Amplifier Cascade other ACU 9061