Transcript
Fully Adjustable Steering Column & Seat For Comfort
Compact Transport Width For Site Access
Quick Engine Access For Easy Maintenance
Grass Collection For Highest Quality Cutting
FM524
4WD On Demand For Best Traction/Slope Performance
Wide Tyres For Low Ground Pressure
Fairway Mower
HAYTER LIMITED, SPELLBROOK, BISHOP'S STORTFORD, HERTS CM23 4BU.
-
TEL:+44 (0)1279 723444
-
FAX:+44 (0)1279 600338
-
e-mail:
[email protected]
-
www.hayter.co.uk
FM524 Fairway Mower Cutting Units
Self steering cutting units
Hand operated adjustment of the cylinder to bottom blade provides quick and accurate setting. The direct drive hydraulic motors ensure efficient power delivery and consistent high performance from all five cutting units.
Tight turns can be made without causing turf marking. Superb peripheral visibility of all cutting units ensures optimum overlap and easy profile cutting of fairways.
Easy accessibility for maintenance and service is essential for low running costs. Both the operator platform and engine cover can be tilted easily to gain access to all areas of the machine. The highest quality flexible hydraulic hoses are used throughout to ensure stress free durable operation.
The FM524 is built to strong commercial standards and is designed to achieve a high level of performance whilst remaining cost effective. Advanced ergonomics and easy to use controls ensure fast efficient cutting and superb operator comfort.
Kubota Engine
Radiator and Oil Cooler The easy to clean open core radiator matrix and five bar oil cooler, ensure maximum cooling efficiency in all conditions. An audible warning system will operate the horn in the unlikely event of over-heating.
Optimum performance and reliability are guaranteed from the globally acclaimed Kubota 35HP diesel engine renowned for its durable construction, fuel economy and ease of maintenance.
Location photography at East Herts Golf Club Hamels Park
SPECIFICATION Engine Transmission Transport Speed Mowing Speed (Recommended)
Weight Dimensions Wheel base Transport width Cutting width Working width Length Height
Kubota V1505-BB-EC. 4 cylinder diesel water cooled indirect injection. Electric start - 1498 cc - 35 hp (26 kw) at 2800 rpm (DIN70020) Closed loop hydrostatic - 4WD on demand drive system. Foot operated differential lock 0 -14 mph 0 - 7 mph 0 - 8 mph 0 - 4 mph
(22 kph) (11 kph) (13 kph) (6.5 kph)
1300 kg
(2750 lbs) Fully laden without operator or options
1460 mm 2440 mm 2950 mm 3200 mm 2700 mm 1500 mm
(57 /2'') (96'') (116'') (126'') (106'') (59'')
Hydraulic System
40 litres (9 UK gallons). Diagnostic hydraulic test ports 10 micron filtration
Controls
Single lever for lifting all cutting units Hand throttle Key ignition switch Cutting unit drive switch (On - Off - Reverse and Backlap) Emergency / parking brake - Single hand operated lever Foot operated forward / reverse pedal Foot operated differential lock Weight transfer adjustment from operator position Lift limiter - Hand operated lever Push button operated horn Adjustable steering wheel/column Optional light switches Hour Meter
Forward Reverse Forward Reverse
1
Instrumentation Warning light indicators
Ground Pressure Steering Brakes
0.73 - 1.68 kg/cm2
Fuel Capacity Tyres
45 litres (10 UK gallons) Front:- 26.5 x 14.00 - 12, 4 ply turf pattern Rear:- 18 x 9.50 - 8, 4 ply turf pattern
(10 - 24 psi) Depending on turf conditions
Hydrostatic rear wheel steering with shockload protection Hydrostatic service braking. Oil immersed disc brakes for parking / emergency braking
Interlock lights Gauges
Operator Safety
Width
Engine oil pressure Hydraulic oil temperature Battery charge Hydraulic transmission filter blocked Engine coolant temperature Hydraulic return filter blocked Engine glow plug Cutterdrive switch off Parking / emergency brake engaged Transmission in neutral Fuel level tank indicator Hydraulic oil tank sight glass Digital hourmeter Cutting unit drive disengages when operator leaves seat. Engine starts only when forward / reverse pedal is in neutral, the parking brake is applied and the cutting units are disengaged. Cutting units disengage when units are lifted. 6
Seat
High back with adjustable angle - Arm rests - Adjustable suspension to suit weight of operator. Height adjustment 60 mm (2 1/2'') Fore - aft adjustment 150 mm (6'')
Options
Full weather ROPS cab - optional air conditioning / heater Full European lighting kit Flashing beacon Grass catchers Deluxe air suspension seat Front roller - Smooth or Grooved.
Cutting Units Type
726A, fully interchangeable cutting units - 660mm (26'') width
Cylinder drive
Direct drive hydraulic motor
Cutting unit lift
Hydraulic lift
Cutting cylinder
7,9 or 11 blade
178mm (7') diameter
Cylinder to bedknife Handwheel adjustment Cylinder speed
1250 rpm approx.
Height of cut
Spanner adjustment
Clip frequency
7 blade:- 48 cuts/m (44 cuts/yd) at 11 kph (7 mph) 9 blade:- 62 cuts/m (56 cuts/yd) at 11 kph (7 mph) 11 blade:- 75 cuts/m (69 cuts/yd) at 11 kph (7 mph)
Configuration
Fully floating
Rear roller
Smooth
6 - 65mm (1/4'' - 21/2'')
76 mm (3'')
diameter
