Transcript
FMC-10 Single Point Gas Alarm
The FMC-10 is a single-point controller for fixed gas detection sensors. Simple and economical, the FMC-10 provides accurate and reliable readings from a variety of fixed gas detection sensors, including O2, H2S, CO, SO2, LEL and more. Integrated Low, High, and Fault dry-contact relays provide flexibility in configuring an alarm and safety system. The FMC-10 is easy to configure and provides
• Full-Featured single-gas controller • Unequaled cost-of-ownership value • Integrated low, high, and fault dry-contact relays
a real-time display of the gas sensor readings on the integrated
• Real-time readings via LCD display
LCD screen. The FMC-10 can be either wall or panel mounted.
• Easy to configure and install
Key Features
Applications
Versatile
• Petrochemical industry
• Detects flammable, oxygen or toxic gases
• Chemical industry
• Wall or panel mount
• Storage facilities
• Two alarm stages and relays
• Process plants
• Compact size
• LNP facilities
• Low power consumption
• Waste water treatment
• 4-20mA analog output • Delay to alarm options Durable • Extensive fault-detection circuitry
Any 4~20mA input The two signal voltages may be utilised simul
Fault - Amber L.E.D.Indicators Power Consumption Digital Display 31/2- Digit 4 watts full alarm System Test - Alarm L.E.D.s flashing Power - Green L.E.D. Outputs Low, High and fault alarm relays -SPCO Switch on delay power indicator flashing de-energised - energised option- 45 sec Alarm relay inhibit - Fault L.E.D. on Alarms Lo/HiLo- gas Redalarm L.E.Dsrelay SPCO normally energ Audible Alarm Low, High and Fault Alarms de-energised option Fault - Amber L.E.D. Power Supply 230/115v AC 50/60 Hz or 24vDC latched or unlatched System Test Alarm L.E.D.s flashing The two voltages may be utilised simultaneously - stand Fault relay SPCO normally Alarm relay inhibit Fault L.E.D. on de-energised Single Point GasPower Alarm Consumption 4 watts - full alarm All contacts rated 5A 230v AC Audible Alarm Low, High and Fault Alarms Outputs Low, High and fault alarm relays -SPCO normally 4-20mA/1-5v Power Supply 230/115v AC 50/60 Hz or 24vDC Output 24vDC @ 100mA max - auxiliary de-energised - energised option The two voltages may be utilised simultaneously inductive) Lo gas alarm relay SPCO normally energised Power Consumption 4 watts - fullDigital alarmsetting (fully adjustable between Specifications Sensors Alarm Settings de-energised option Outputs Hazardous Area Low, High and fault alarm options relays -SPCO Delay to alarm - 10/30normally seconds latched or unlatched de-energised - energised option Measuring Combustible Gas: LEL, % Vol, ppm Sensor Inputs Bridge type 3 wire detector mv (Catalyt Range Toxic Gas: ppm, % Vol Lo gas alarm relay SPCO normally energised Fault relay SPCO normally de-energised - energised option 4-20mA (electrochemical / infrared)Oxygen: % Vol - Depletion or Enrichment option 3 core 1.5mm2 screened 1.5km All contacts rated 5A - 230v AC Sensor Cablede-energised Any 4~20mA input signal Miscellaneous Operating temperature -10 to +50˚C latched or unlatched 4-20mA/1-5v Indicators Digital Display 3½ Digit Storage temperature -10 to 65˚C Fault relay SPCO normally de-energised - energis Output 24vDC @ 100mA max - auxiliary equipment (non Power: Green LED Alarm relay inhibitAC during calibration All contacts rated 5A 230v Switch on delay power indicator flashing: 45inductive) secs Sounder Inhibit 4-20mA/1-5v Alarms Lo/Hi: Red LEDs Alarm Settings Digital setting (fully adjustable between zero and full System scale) function test switch Output 24vDC @ 100mA max - auxiliary equipm Fault: Amber LED Delay to alarm options 10/30 seconds, 10 minutes Dimensions L 200mm H 120mm D 58m System Test: Alarm LEDs flashing inductive) Weight 0.8 kg Inputs Bridge type 3 wire Alarm detector mv (Catalytic) Digital setting AlarmSensor relay inhibit: Fault LED on Settings (fully adjustable between zero an Protection IP65 4-20mA (electrochemical / infrared) Audible Alarm Low, High and Fault Alarms Delay to alarm options - 10/30 seconds, 10 minu Field Terminals - screw type 2.5mm (Sounder) Sensor Cable 3 core 1.5mm2 screened Sensor1.5km Inputs Bridge type Cable 3 wireentry detector mv (Catalytic) - top, bottom, sides, rear Power Supply 230/115V AC 50/60 Hz or 24V DC Miscellaneous Operating temperature -10 to +50˚C / infrared) *Specifications 4-20mA are subject(electrochemical to change The two voltages may be utilized simultaneously Sensor Cable 3 core 1.5mm2 screened 1.5km Storage temperature -10 to 65˚C Power 4 watts - full alarm Operating temperature -10 to +50˚C Alarm relay inhibit Miscellaneous during calibration Consumption Storage temperature -10 to 65˚C Sounder Inhibit Outputs Low, high and fault alarm relays: SPCO normally de-energized Alarm relay inhibit during calibration Tr (energized option) System function test switch 000 Sounder Inhibit Low gas alarm relay SPCO normally energized Dimensions (de-energized option)L 200mm H 120mm D 58mm The FMC-10 System function test switch Latched or unlatched Weight 0.8 kg Fault relay SPCO normally de-energized (energized option) Dimensions L 200mm H 120mmFMC-10 D 58mm Protection IP65 All contacts rated 5A - 230V AC Sounder Weight 0.8 kg 4-20mA /1 to 5V Field Terminals - screw type 2.5mm Instruction m Protection IP65 F2 S Output 24V DC @ 100mA max - auxiliary equipment (non-inductive) Cable entry - top, bottom, sides, rear Field Terminals - screw type 2.5mm
FMC-10
• •
DC out
Alarm Settings
Digital setting (fully adjustable between zero and full scale) *Specifications are subject to change Delay to alarm options: 10 to 30 seconds, 10 minutes
Sensor Inputs
Bridge-type 3-wire detector mv (Catalytic) 4-20mA (electrochemical/infrared)
Sensor Cable
3-core 1.5mm2 sheilded, <1.5km
Miscellaneous
Operating temperature: 14° F to 122° F (-10° C to +50° C) 000 Storage temperature: 14° F to 149° F (-10° C to 65° C) Alarm relay inhibit during calibration Audible alarm inhibit System function test switch Dimensions: 7.9" L x 4.7" W x 2.3" H (200mm x 120mm x 58mm) Weight: 1.75 lbs. (0.8 kg) S Protection IP-65 Field Terminals: Screw-type 2.5mm Cable entry: Top, bottom, sides, rear
Cable entry - top, bottom, sides, rearselect
*Specifications are subject to change
Relay Select Energised / De Energised
Field terminals
3
E L N Mains in
4 5 +
6
7
8
Low Alarm
www.raesystems.com
T2 T1 LL O2 RES
IN/OUT DC
Sounder
Sounder
Low Alarm
High F Alarm Sensor volts adjust
Mute DPM Span www.raesystems.com
S
F2
Fault
A
Sounder
Alarm 15Transformer 16 17 18 1 set push switch - + E P Y
F1 -
4-20mA
F2Remote
Reset
USA/CanadaN/O 1-877-723-287 DC out Europe/Russia +45 8652 515 select Middle East +971 4 887 55 Field Terminals Zero Calibration China +86 10 5885 8 output adjust Span Asia +852 2669 08
RAE Systems Inc. DC out 3775 North First Street, select San Jose, CA • 95134 • USA Field Terminals 4-20mA
[email protected]
9 10 11 12 13 14 High Alarm
Sen
Sounder Mute
Field terminals Field Terminals
Worldwide Sales Offices Corporate Headquarters USA/Canada 1.877.723.2878 RAE Systems, Inc. Inc. Europe +45.86.52.51.55 3775 North First Street RAE Systems 3775 North First Street, Middle East +00971.4.440.5949 San Jose, CA 95134 USA • 95134 • USA China +86.10.5885.8788-3000
[email protected] Jose, CA
[email protected] Asia Pacific +852.2669.0828
DS-1080-01
4 000 5 6 7 8 9ED 10 11 12 13 14 Hi F1 + - Nc C No Nc C Lo No Nc C No M
3
Mains in
- Nc C No Nc C No Nc C No
IN/OUT DC
2
E L N
Field terminals 2
Transformer
1
Specifications are subject to change
1
Field T
Fault
1
2
3
4 5
6
7
8
9 10 11 12 13 14
15 16 17 18 19 20 + - Nc C No Nc C No Nc C No +IN/OUT Y W MainsHigh Fault E P Low - + Alarm in Alarm
E L N
4-20mA
DC
Sensor
15 16 17 18 19 20 - + E P Y W - + 4-20mA
Sensor
www.raesystems.com RAE Systems Inc.
3775 North1-877-723-2878 First Street, USA/Canada San Jose, CA • 95134 • USA Europe/Russia +45 8652 5155
[email protected] Middle East +971 4 887 5562 China +86 10 5885 8788 Asia +852 2669 0828
USA/Canada 1-877-723-2878
Europe/Russia +45 8652 5155 Toll-Free 877-723-2878 Middle East +971 4 887 5562
China +86 10 5885 8788 Asia +852 2669 0828
www.raesystems.com
