Transcript
FMC103 www.4dsp.com FMC103 low pin count FMC ADC
4-channel 12-bit ADC - 210 Msps Description The FMC103 is a four-channel ADC FMC (FPGA Mezzanine Card) Daughter Card
Features
which is fully compliant with the VITA 57.1-2008 standard. The FMC103 card provi-
• Four channel 12-bit 210 Msps A/D conversion
des four 12-bit 210 Msps A/D channels which can be sampled by an internal clock
• Available as air cooled and conduction cooled
source (optionally locked to an external reference) or an externally supplied sample
• VITA 57.1-2008 compliant
clock. A trigger input for customized sampling control is also available.
• 1.5V to 3.3V VADJ operation
The LPC-compatible FMC103 has front panel I/O and can be conduction cooled.
• Based on TI ADS62P28
The board is also available with Mil-I-46058c compliant Conformal Coating. Another
• LVDS or 1.8V LVCMOS output operation
important feature of the FMC103 is the ability to cascade multiple FMC boards
• Coaxial front panel inputs on SSMC connectors
supported by a single clock frequency.
• Single ended AC- or DC-coupled analog input
The design is based on the TI ADS62P28 Dual Channel 12-bit 210 Msps ADC with
• Optional analog differential input
programmable DDR LVDS or parallel LVCMOS outputs. The analog signal inputs
• Flexible clock tree enables:
can be either single ended or differential, AC- or DC coupled connecting to SSMC
- internal clock
coaxial connectors on the front panel.
- external clock
The FMC103 allows flexible control on sampling frequency, analog input gain, and
- cascading multiple boards - Optional
offset correction through serial communication with a carrier card. Furthermore the
• LPC (low-pin count) compatible
card is equipped with power supply and temperature monitoring and offers several
• Mil-I-46058c Conformal Coating Compliant - Optional
power-down modes to switch off unused functions.
Applications • Software defined radio (SDR) OPTIONAL
Clock Output
• RADAR/SONAR • Wireless communication receivers
Reference Clock or Sample Clock
Monitoring
• Aerospace and test measurement instruments
Clock
Clock Tree
FMC Connector LPC 160 Pins
Clock + Data
ADS62P28 12-bit, 210 Msps
Support
Status & Control
Trigger ADC A
• Medical equipment
• User Manual • Performance Guide • Reference firmware design (VHDL) • Reference ISE project for Virtex-5, Virtex-6 and Spartan-6 • Email support (
[email protected])
Status & Control
ADC D
www.4dsp.com/FMC103 rev-1.3
AS9100 Certified
For Digital Signal Processing design & system integration
FMC103 www.4dsp.com Performance
Ordering information
• 700MHz Bandwidth (AC)
Build your part number online on the product page
320MHz Bandwidth (DC)
http://www.4dsp.com/part_num/fmc.html?id=103
• 80dB Cross-Talk • 10dBm analog inputs (2Vpp) • 0dBm clock input (typ.) • (LV)TTL compatible trigger
FMC103 Performance 12,5
90 Fs = 210Msps Full scale input AC-coupled
12,0
80
11,0
75
10,5
70
10,0
65
9,5
60
9,0
55
8,5
50
0
50
0
45
0
0
40
35
0
0
Air-cooled
SNR
30
ENOB
25
0
0
20
15
0
10
50
Fin [MHz]
ANSI/VITA 47
85 SNR [dBFs] / SFDR [dBc]
ENOB [bits]
11,5
SFDR
Conduction-cooled
EAC4
EAC6
ECC1
ECC4
Operating temperature
0C to +55C
-40C to +70C
0C to +55C
-40C to +85C
Storage temperature
-40C to +85C
-50C to +100C
-40C to +85C
-55C to +105C
Humidity
95%
95%
95%
95%
Operating vibration
5Hz to 100Hz PSD = 0.04g2/Hz
5Hz to 100H PSD = 0.04g2/Hz
5 Hz to 100 Hz PSD increasing at 3 dB/octave
5 Hz to 100 Hz PSD increasing at 3 dB/octave
100 Hz to 1000 Hz PSD = 0.04 gs^2/Hz
100 Hz to 1000 Hz PSD = 0.04 gs^2/Hz
100 Hz to 1000 Hz PSD = 0.1 g2/Hz
100 Hz to 1000 Hz PSD = 0.1 g2/Hz
1000 Hz to 2000 Hz PSD decreasing at 6 dB/octave
1000 Hz to 2000 Hz PSD decreasing at 6 dB/octave
1000 Hz to 2000 Hz PSD decreasing at 6 dB/octave
1000 Hz to 2000 Hz PSD decreasing at 6 dB/octave
Operating shock
20g, 11 millisecond, half-sine or 20g, 11 millisecond, terminal sawtooth shock pulses in all three axes
20g, 11 millisecond, half-sine or 20g, 11 millisecond, terminal sawtooth shock pulses in all three axes
40g, 11 millisecond shock half-sine or 40g, 11 millisecond, terminal sawtooth shock pulses in all three axes
40g, 11 millisecond shock half-sine or 40g, 11 millisecond, terminal sawtooth shock pulses in all three axes
Operating altitude
-1500 ft to 60,000 ft (with airflow)
-1500 ft to 60,000 ft (with airflow)
-1500 ft to 60,000 ft
-1500 ft to 60,000 ft
Conformal coating
Optional
Optional
Optional
Optional
Talk to us about your algorithmic requirements, 4DSP is a full-service firmware and software development house. We are a specialist at high performance FFT and Video Processing. Check with us, we may have IP Cores that meet requirements for your application, right off the shelf. rev-1.3
AS9100 Certified
For Digital Signal Processing design & system integration
