Transcript
FMC204 www.4dsp.com FMC204 FMC-HPC Digital-to-Analog Converter Board
Quad Channel 16-bit 1 Gsps D/A Description The FMC204 is a quad channel D/A FMC. The FMC204 provides four channels
Features
of 16-bit D/A conversion enabling simultaneous sampling at a maximum rate of
• Quad channel 16-bit 1 Gsps D/A conversion
1 Gsps. The sample clock can be supplied externally or by an internal clock source
• VITA 57.1-2010 compliant
(optionally locked to an external reference). Additionally a trigger input for custo-
• Conduction Cooled - Standard Option
mized sampling control is available. The FMC204 daughter card is mechanically
• LVDS and 1.65V to 3.3V IO signalling
and electrically compliant with FMC standard (ANSI/VITA 57.1). The HPC (high-pin
• Single ended AC-coupled analog output
count)-compatible card has front panel I/O and can be used in both conduction-
• Clock Source, Sampling Frequency,
cooled and convection (air) cooled environments. The FMC204 allows flexible
and Calibration settings through an
control on clock source, sampling frequency, and calibration through a serial
SPI communication bus
communication bus. The FMC204 card is equipped with power supply and
• Flexible clock tree enables
temperature monitoring with several power-down modes to switch off unused
- internal sampling clock
functions, reducing system level power and heat. This is ideal for applications such
- external reference and sampling clock
as airborne where power demand effects mission range and on-station mission time.
• HPC (high-pin count) compatible • 6 Front panel SSMC connectors
HDMI
Board Monitoring
MGT [4]
Clock / Sync Tree
Board Control
Trigger / Sync
functions for system power savings • HDMI connector for user defined signaling
2.5V single ended [4]
LVDS Clock [1]
Tx [5]
LVDS Trigger [1]
LVDS data [16]
X1 D/A: DAC5682Z / 16-bit @ 1 Gsps X2
1:2
LVDS Sync [1]
Rx [5]
DAC D
(Optional)
Applications • Waveform Generation • Software defined radio (SDR) • Medical equipment • Aerospace and test measurement instruments
Tx [5]
Rx [5]
X1 D/A: DAC5682Z / 16-bit @ 1 Gsps X2
• Mil-I-46058c Conformal Coating Compliant
• RADAR/SONAR
MICTOR 38-pins Multi Gigabit Transceiver (optional)
DAC B
FMC High-pin Count 400-pins LVDS
LVDS clock [1]
DAC C
• Power-down modes to switch off unused
MICTOR 38-pins Multi Gigabit Transceiver (optional)
Status & Control
DAC A
on the front panel
I2C
LVTTL [4]
Clock / Reference
• 4 Rocket I/O pairs and 4 LVTTL lines available
EEPROM
Support • Stellar IP available for this product. A simple way to design FPGA firmware with automated code and bitstream generation • ML605 reference design available
LVDS clock [1]
• User Manual
LVDS data [16]
• Reference firmware design (VHDL) • Reference ISE project for Virtex-6
www.4dsp.com/FMC204 rev-1.3
AS9100 Certified
For Digital Signal Processing design & system integration
FMC204 www.4dsp.com
ANSI/VITA 47
Air-cooled
Conduction-cooled
EAC4
EAC6
ECC1
ECC4
Operating temperature
0C to +55C
-40C to +70C
0C to +55C
-40C to +85C
Storage temperature
-40C to +85C
-50C to +100C
-40C to +85C
-55C to +105C
Humidity
95%
95%
95%
95%
Operating vibration
5Hz to 100Hz PSD = 0.04g2/Hz
5Hz to 100H PSD = 0.04g2/Hz
5 Hz to 100 Hz PSD increasing at 3 dB/octave
5 Hz to 100 Hz PSD increasing at 3 dB/octave
100 Hz to 1000 Hz PSD = 0.04 gs^2/Hz
100 Hz to 1000 Hz PSD = 0.04 gs^2/Hz
100 Hz to 1000 Hz PSD = 0.1 g2/Hz
100 Hz to 1000 Hz PSD = 0.1 g2/Hz
1000 Hz to 2000 Hz PSD decreasing at 6 dB/octave
1000 Hz to 2000 Hz PSD decreasing at 6 dB/octave
1000 Hz to 2000 Hz PSD decreasing at 6 dB/octave
1000 Hz to 2000 Hz PSD decreasing at 6 dB/octave
Operating shock
20g, 11 millisecond, half-sine or 20g, 11 millisecond, terminal sawtooth shock pulses in all three axes
20g, 11 millisecond, half-sine or 20g, 11 millisecond, terminal sawtooth shock pulses in all three axes
40g, 11 millisecond shock half-sine or 40g, 11 millisecond, terminal sawtooth shock pulses in all three axes
40g, 11 millisecond shock half-sine or 40g, 11 millisecond, terminal sawtooth shock pulses in all three axes
Operating altitude
-1500 ft to 60,000 ft (with airflow)
-1500 ft to 60,000 ft (with airflow)
-1500 ft to 60,000 ft
-1500 ft to 60,000 ft
Conformal coating
Optional
Optional
Optional
Optional
Talk to us about your algorithmic requirements, 4DSP is a full-service firmware and software development house. We are a specialist at high performance FFT and Video Processing. Check with us, we may have IP Cores that meet requirements for your application, right off the shelf. rev-1.3
AS9100 Certified
For Digital Signal Processing design & system integration
