FnIO-S Series Power Module / ST-7641
Field Distributor 5Vdc,24Vdc,48Vdc,110Vac,220Vac / ID Type - ST-7641은 1 Channel Field Distributor Module 입니다.
Items
Specification
Input Specification Field Power Voltage Indicators Field Power Contacts Current General Specification System Power Dissipation Wiring Weight Module Size
Arbitrary 1 Green/Red LED, Module Status Max. 10A Max. 18mA @ 5Vdc I/O to Field Power:Non-Isolation 70g Max. 12mm x 99mm x 70mm
Pin No 0 1 2 3 4 5 6 7
ENVIRONMENT SPECIFICATION Environmental Specifications
Operating Temperature Storage Temperature Relative Humidity Mounting General Specification Shock Operating Shock Non-Operating Vibration/shock-resistance
-20℃~60℃ -45℃~85℃ 5%~90% non-condensing DIN rail 10g 30g Displacement : 0.012Inch p-p from 10~57Hz Acceleration : 2G’s from 57~500Hz Sweep Rate : 1 octave Per Minute Axes to test : X, Y, Z Frequency Sweeps Per Axis : 10
EMC resistance burst/ESD Installation Pos. /Protect. Class Product Certifications Environment Condition
EMC Directive Variable/IP20 UL/cUL,CE Refer to " Environment Specification"(page : 1-261)
Wire diagram
1-259
(주)크래비스 TEL:031-206-8077~8 http://www.crevis.co.kr e-mail : [email protected]
Description NC NC Field Ground Field Ground Field Power arbitrary(N) Field Power arbitrary(N) Field Power arbitrary(P) Field Power arbitrary(P)
FnIO-S Series Power Module / ST-7641
Example : When you have a FnI/O setup and need to use with different Field Power Voltage, you can use the ST-7641 to change the isolated Voltage form 5Vdc, 12Vdc to 24Vdc to 48Vdc, or from 110Vac, 220Vac as below;
LED DISPLAY Module Status LED (STATUS)
Status Not Power No Initialized FnBus Connection FnBus Ready FnBus Fault Device Fault
LED is OFF Green Flashing Green Flashing Red Red
To Indicate Device has no expansion Module or May Not be power. The Parameter is not initialized yet FnBus Normal Operation FnBus Ready FnBus Failed Communication Device Fault
(주)크래비스 TEL:031-206-8077~8 http://www.crevis.co.kr e-mail : [email protected]
1-260