Transcript
IS DN e x t e n s i o n ove r f i b e r o p t i c
FO-4BRI
ISDN BRI to BRI modem over fiber optic
FO-4BRI
4 ISDN BRI fiber optic Extension of 4 BRI from
PBX or Network BRI set up as NT or TE Set up as T0 or S0 Operate also with an E1 fiber modem FO-E1T1 Fiber optic multimode or singlemode up to 117 km
DISTRIBUTION and EXTENSION of ISDN BRI CXR, developer and manufacturer of Telecom equipment for 30 years, has widen his range of ISDN equipment including several Terminal Adapters, ISDN Router, Channel Bank PRI/BRI and PRI concentrator with a new range for the deport and the distribution of IDSN BRI’s.
OTHER EQUIPMENT FOR BRI DISTRIBUTION: MD424B / MD444B 4 ISDN BRI G.SHDSL modem over 2 or 4 wire up to 8km
CV24BR 4 ISDN BRI converter to E1 G703/G704 Interface converter to PDH/SDH or MW links Distribution of BRI over TDM Network
MI-4PRI
ISDN switch of 8 PRI LCR capabilities
The FO-4BRI is a fiber optic modem, this is carrying 4 independent BRI with 2B and 1D channels. This modem is available as multi-mode or single-mode fiber. The budget is covering the distance of 4, 8, 30 and 117 km. This Modem is intended to: Extend in the customer premise the BRI line through an industrial campus from the Public termination with a full immunity to electric noise Interconnect 2 PBX in a campus or over several stairs in a large building despite to the electric/elevator/air conditioning installation Extend the BRI line in large infrastructure campus to connect PBX/phone set/Visio up to 60 km This fiber optic modem is a secure communication link to transport voice communication for military, airport between central site and isolated users. The FO-4BRI is supporting the point to point connection (T0) or bus connection (S0). In the pair of modem one equipment must be set as TE in order to be connected to the Network or the PBX while at the other end the other modem is set as NT to connect to the ISDN terminal. The FO-4BRI-C is supporting the power feeding of the BRI to use a ISDN phone without power.
The FO-4BRI is full compatible with the old generation of BRI modem FO82BR and FO84BR The FO-4BRI can work together with a E1 converter CV24BR or MD424B/MD444B if they are connected through E1 interface over an E1 network.
2
SPECIFICATIONS
I S DN ex t en s i o n o v er f ib er optic
Fiber Optic Line
ST or SC connectors option FC Type of multi-mode fiber (NM) with diameter 62,5/125µm or single-mode (SM) 9/125 µm (internal/external)
Models FO
SL
Z3
Emitter type
MM LED
MM LED
SM /ELED
SM LASER
Distance and wave
850 nm
1310 nm
1310 nm
1310 nm
15 dB
12 dB
14 dB
23 dB
3 dB/ km
1.5 dB/ km
0,35 dB/km
0,35 dB/ km
4 km
8 km
30 km
60 km
Coverage
www.cxr.com
Attenuation M1w
Attenuation typical of the fiber
Smart Solutions for Smart Networks
Budget - x (1dB) km with x: number of connectors
M8
Minimum optic Budget
MXCFG Graphical management software
The customer will calculate its coverage according to the number of connectors and the fiber quality : coverage =
ISDN • 4 Basic Access Rate BRI interfaces 2B+D • Line 4W • Use to carry a Bus S0 or a point to point T0 • One device of the pair must be set up as NT (network) and the other as TE (terminal) • In version DC FO-4BRI-xxxC only , one BRI is power source to power feed an ISDN telephone set Presentation • Desktop in metal box, all connections on front except power • Rack card for AMS4/AMS16, uses 2 slots Management • Local console, RS232 port • Intuitive menus and Windows GUI—MXCFG • Management card in the AMS16 chassis : SNMP • V54 loop test : B2, B3 loop Signalling : standalone or rack card • LED : Power, DTE, SYNC, ERR, DATA and test • Push button CLR to delete the ERR mode
General Characteristics of desktop • Dimensions : 287 x 175 x 41 mm • Power supply : version AC 110—230 Vac version DC 48 Vdc (36 - 72 Vdc) • Power consumption < 10 W • Weight : 1,5 kg • Operating temperature : -5 to +50 °C • Hygrometry : 90%, non condensing • MTBF = 120,000 H
O RDER R EFERENCES FO-4BRI-M8TI
FO multimode modem 820nm ST, LED, up to 4km, 4 ISDN BRI S0/T0, NT or TE interface , Internal 230vac
FO-4BR-SLTI
FO single-mode modem 1300nm ST, LED up to 30km, 4 ISDN BRI S0/T0, NT or TE interface, metal box w connector on front, internal 230vac
FO-4BR-SLCI
FO single-mode modem 1300nm SC, LED up to 30km, 4 ISDN BRI S0/T0, NT or TE interface, metal box w connector on front, internal 230vac
FO-4BR-SLCC
FO single-mode modem 1300nm SC, LED up to 30km, 4 ISDN BRI S0/T0 including one BRI with power feeding, NT or TE interface, metal box w connector on front, internal 48Vdc AMS4/16 card, FO multimode modem 820nm ST, LED, up to 4km, 4 ISDN BRI S0/T0, NT or TE interface, connector on front. AMS4/16 card, FO single-mode modem 1300nm ST, LED up to 30km, 4 ISDN BRI S0/T0, NT or TE interface, connector on front. AMS4/16 card, FO single-mode modem 1300nm SC, LED up to 30km, 4 ISDN BRI S0/T0, NT or TE interface, connector on front.
FO-4BRI-M8TR CXR Anderson Jacobson Rue de l'Ornette 28410 Abondant - France T +33 (0) 237 62 87 90 F +33 (0) 237 62 88 01 email:
[email protected]
FO-4BR-SLTR FO-4BR-SLCR
The information contained in this document are provided without warranty and do not constitute a contractual document. In order to improve its products, CXR reserves its right to modify without notice any part of this document.
