Transcript
HO9290R0TX-WALNUT/ HO9292R0TX-ANTIQUE WHITE HO9291R0TX-BLACK Fold-out Convertible Desk Assembly Instruction
For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096
[email protected]
PO# PATENT NUMBER D618939
Max Top Load = 20 lb.
www.seidal.com
HO9290R0TX-WALNUT/HO9292R0TX-ANTIQUE WHITE/HO9291R0TX-BLACK
Fold-out Convertible Desk Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Using a screw that is too long will cause damage. Before beginning assembly, separate each type of screw. Carefully study the screw diagrams below. You may receive extra hardware with your unit.
1
Quantity Of 1
Quantity Of 4
5
Quantity
8
Of 1
Screw 5/32”x3/4”
Bracket
10
3
Quantity Of 8
Shelf Holder Quantity Quantity Of Of23
Flat washer ∮1/4”x5/8”
Plastic Anchor
7
Quantity Of 2
Shelf
Cabinet
4
2
Quantity Of 1
6
Quantity Of 3
Screw ∮5/32”x2”
9
Quantity Of 1
Screw ∮5/32”x1-1/4”
Quantity Of 1
Level For replacement parts or questions, please call Customer Service at 1-800-633-5096. Periodically apply furniture wax to renew the finish Please call manufacturer for assistance, on wood part. Avoid ru bbing or scra tching th e questions or parts. Care and Cleaning Instructions: Before using, wipe wi th a clean, d ry clo th.
surface wi th rough or abrasi ve objects.
Assembly Tool Required No.2 Phillips Screw Driver
HO9290R0TX-WALNUT/HO9292R0TX-ANTIQUE WHITE/HO9291R0TX-BLACK
Assembly Instruction
Step 1: Locate fold-out convertible desk on a solid wall and at a comfortable height off the floor, normally eye level.
Step 2: Measure the wall and mark the width and height of desk as Figure 1.
Step 3: Measure the wall and mark the location of the center of each mounting holes. See Figure 2. Must be attached to wall stud
NOTICE The top 2 screws must be attached to wall studs. Using the level, make sure that all marks are level on the wall. Step 4: Using power drill (with 3/16″drill bit) drill holes on bottom two marks.
Use Wall Anchors
Step 5: Attach bracket (7) by using screw (8) to the bottom of the unit as shown.
Step 6: Insert plastic anchors (4) into the two bottom mounting holes. (When doing this, you will need a hammer help you).
Step 7: With an assistant, open and attach cabinet (1) to wall using washer (5), screw (6/9) as shown. Before using the work surface, please make sure the hinges' notch sits right on the gear so that the leg can be fixed. You may need a little push to secure it
Step8: Insert pin (3) into the hole of cabinet (1) as shown then put on shelf (2). Place level on top surface to make sure product is level
Parts Replacement Form
Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No
Parts Letter
Parts Description
Quantity Needed
Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s) and we are not responsible for any damages due to product modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise. Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central time if you have product issues or email us at
[email protected]. Please ask for customer service representative for issues involving damages or replacement parts. Please ask for technical assistance representative for any issues with product and assembly/construction
Please contact the retailer that you purchased from for returns. Customer Service 1-800-633-5096
[email protected] Southern Enterprises, Inc. 600 Freeport Parkway, Suite 200 Coppell, Texas 75019
