For Additional Information Go To Www.ocl.com And

Transcript

BEGIN HERE FOR ADDITIONAL INFORMATION GO TO WWW.OCL.COM AND SEARCH: UNA OUTDOOR SERIES HANGING SYSTEM SIZE O1OA OUTDOOR ADA COMPLIANT SCONCE DIFFUSER 14 NOTE: ONLY AVAILABLE IN DOWNWARD ORIENTATION FINISH MW MATTE WHITE ACRYLIC LAMPING (PHOTOMETRIC TEST #) PTD PAINTED – SPECIFY CODE (EX. BKP FOR BLACK PAINT, SEE PAGE 122 FOR PAINT OPTIONS) UA1 36 48 60 Una TM OUTDOOR 3.5" 3.5" 14" 3.25" 3.5" 24" 3.25" 36" 3.25" 3.5" 48" 3.25" • S  imple, linear profile creates soft grazing effect on wall surface. • A  vailable with T5 and LED illumination options. Recessed Ceiling 24” 1LF14 1LF24 1LD18/30K 1LD18/35K 1LD18/40K 1@14W T5 1@24W T5HO (15992) 1@18W LED 3000K 1@18W LED 3500K (17603) 1@18W LED 4000K 36” 1LF21 1LF39 1LD25/30K 1LD25/35K 1LD25/40K 1@21W T5 1@39W T5HO (15993) 1@25W LED 3000K 1@25W LED 3500K (17604) 1@25W LED 4000K 48” 1LF28 1LF54 1LD33/30K 1LD33/35K 1LD33/40K 1@28W T5 1@54W T5HO (16072) 1@33W LED 3000K 1@33W LED 3500K (17605) 1@33W LED 4000K 120 DMO 0 -10V DIMMING DRIVER (LED ONLY) 277 DMA A  DVANCE MARK 10 DIMMING (FLUORESCENT ONLY) ® 347 (FLU ONLY) 60” 1LF35 1LF80 1LD44/30K 1LD44/35K 1LD44/40K 1@35W T5 1@80W T5HO (15994) 1@44W LED 3000K 1@44W LED 3500K (17606) 1@44W LED 4000K 89” 2LF28 2LF54 1LD64/30K 1LD64/35K 1LD64/40K 2@28W T5 2@54W T5HO 1@64W LED 3000K 1@64W LED 3500K 1@64W LED 4000K DMA7 A DVANCE MARK 7 DIMMING (FLUORESCENT ONLY) ® DML L  UTRON DIMMING (FLUORESCENT ONLY) ® FUS F USED SPECIFY CATALOG CODE 3.5" 60" 3.25" 3.5" 3.25" 89" • Up to 65 lumens per watt. - - - - - FIXTURE SPECIFICATIONS • F  ield replacement of LED arrays and drivers is simple and requires minimal effort. • 3 step MacAdam ellipse color binning. • L  ED luminaire reliability; L70 >70,000 hours at 70% lumen maintenance. • E  xtruded diffuser is high transmission frosted white acrylic, UV stable and UL-94 HB flame rated. • 2  4 standard powder coat paints offered, however all RAL colors available. • Heavy wall aluminum extruded profile. • Fixture is supplied with a 0.875” KO for attachment of 0.5” conduit and requires additional anchors. • Bodine emergency ballast available, standard with remote mounted test switch and indicator light (fluorescent only). • Advance and Lutron dimming ballasts available. Controls not included. ® ® - -- MOUNTING INFORMATION • Integral HPF electronic fluorescent ballast with Class A sound rating (3-5 year warranty depending on ballast specification). ® • C  ontact factory for additional modifications or options. - PHOTOMETRIC INFORMATION AVAILABLE AT W W W.OCL.COM SAMPLE CODE: UA1-O1OA-48-MW-BTP-1LD33/30K-120 FEATURES Sconce 89 OPTIONS MEASUREMENTS WT. 5 LBS PER FOOT Pendant 14” 1LD10/30K 1@10W LED 3000K 1LD10/35K 1@10W LED 3500K (17602) 1LD10/40K 1@10W LED 4000K 24 UA1-O1OA-48-MW-BTP VOLTAGE • Integral Class II driver (3-5 year warranty depending on driver specification). • For photometric data, please visit www.ocl.com. • Structural mounting required for fixtures over 50 lbs. • For specific mounting instructions, please contact factory. • Five year product warranty. FIXTURE SIZE MOUNTING SPACING 14” 24” 36” 48” 60” 89” Center 12” 24” 36” 48” 77” MOUNTING SPACING 6.125” 0.875” HOLE FOR 0.5” CONDUIT SUPPLY WIRE ENTRY (0.875” HOLE) ALWAYS 6.125” FROM EITHER END OF FIXTURE • For lamp and base information, see pages 124-131 in the reference section. www.ocl.com Phone: 314.863.1895 | Fax: 314.863.3278 | www.ocl.com