Transcript
n
Parts Manual
N o R tf ep o r ro du ct io
Regent Series
Lawn Tractors & Mower Decks
20HP Product Mfg. No.
Description
2691075
Regent, 2040RD 20HP B&S Hydro and 40" Mower Deck (CE/Export) Regent, 2040RDF 20HP B&S Hydro and 40" Mower Deck (CE/Export)
2691076
24HP Product Mfg. No.
Description
2691077
Regent, 2440RD 24HP B&S Hydro and 40" Mower Deck (CE/Export) Regent, 2440RDF 24HP B&S Hydro and 40" Mower Deck (CE/Export)
2691078
Manual Part No. 1754611 Revision Rev. Date: 2/9/2012
n
N o R tf ep o r ro du ct io
Table Of Contents PRODUCT COMPONENTS
PAGES
Frame & Front Axle Group ................................................................................................................................... Steering Group ..................................................................................................................................................... Engine Group - 20HP & 24HP ............................................................................................................................. Controls Group ..................................................................................................................................................... Electrical Group .................................................................................................................................................... Hood, Grille & Dash Group .................................................................................................................................. Seat Deck & Fuel Group ...................................................................................................................................... Mulching Flap Group ............................................................................................................................................ Lift Group - Manual .............................................................................................................................................. Wheels & Tires Group .......................................................................................................................................... Decals Group ....................................................................................................................................................... Back Plate Group ................................................................................................................................................. Collector Group .................................................................................................................................................... French Guard Group ............................................................................................................................................ 40" Mower Deck - Belt & Idler Arm Group ........................................................................................................... 40" Mower Deck - Housing, Hitch, Arbors & Blades Group ................................................................................
4 6 8 10 14 18 20 22 24 26 28 30 32 34 36 40
N o R tf ep o r ro du ct io
n
Torque Specification Chart ..................................................................... Inside Back Cover
Frame & Front Axle Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
N o R tf ep o r ro du ct io
n
2988017a
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
4
1754611
Frame & Front Axle Group QTY. DESCRIPTION
1726504 1611710 2860183 1728018 1730186 1721918A 1960652 2860646 1931277 1960032 1731912 1751964A 1727872A 1930645 1727873A 885530A 1735874 1735934 1735989 1736000 1930601 1735868 1728086 1735973 1931335 1960035 2860744 1735919 1735851 1735928 1735892 1735926 1736499 1960703
2 2 4 1 2 1 2 1 2 2 2 1 1 2 1 1 2 2 6 6 4 4 2 1 2 1 1 1 2 2 2 2 1 2
HUB CAP RING, Klipring WASHER, 1-5/8 AXLE, Front (Includes Ref. Nos. 0010, 0020, 0030, 0130 & 150) BUSHING, Axle Pivot HOOK, Hitch 5/16 THK CAPSCREW, 7/16-14 x 1-1/2 NUT, Hex Flange 5/8-11 NUT, Hex Flange, 5/16-18 CAPSCREW, Hex 3/8-16 x 1-1/4 SPACER ROD, Tie SPINDLE & CUP ASSEMBLY, Right NUT, Hex Flange, 3/8-16 SPINDLE & CUP ASSEMBLY, Left TOWER BOLT, M8 x 75 NUT, M8 WASHER, 8.4 WASHER, 8 CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 5/8 BOLT, M8 x 20 PIVOT, Hood SUPPORT, Muffler BOLT, Carriage, 5/16-18 x 1 WASHER, 5/8 CAPSCREW, Hex, 5/8-11 x 3-1/4 LINK, Drag BALL JOINT, CS16 M10-M12 NUT, M12 DISTANCE, Front axle 0-9521-29 NUT, M10 DIN6923 8 FRAME WASHER, 5/8
N o R tf ep o r ro du ct io
0010 0020 0030 0040 0050 0060 0070 0080 0090 0100 0110 0120 0130 0140 0150 0160 0170 0180 0190 0200 0210 0220 0230 0240 0250 0260 0270 0280 0290 0300 0310 0320 0330 0400
n
REF NO PART NO.
Footnotes
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
5
1754611
Steering Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
N o R tf ep o r ro du ct io
n
2988023a
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
6
1754611
Steering Group REF NO PART NO.
QTY. DESCRIPTION
1727813 1960114 1729665 1728069 1960576 1722319 1735934 1727940 1735870 1728027 1728122 1934654 1931211 1611710 1735989 1736000
1 2 2 1 1 1 4 1 4 1 2 2 2 1 4 4
SHAFT, Steering Gear & Spline WASHER, 3/4 BUSHING STEERING WHEEL NUT, Hex Lock 5/8-18 CAP, Steering Wheel, Snapper NUT, M8 BRACKET, Sector Support BOLT, M8 x 25 GEAR, Steering , 1/4 Thick, 26 teeth SPACER, Sector Gear SCREW, Hex Lock Flange, 3/8-16 x 1 NUT, Hex Flange, 3/8-16 RING, Klipring WASHER, 8.4 WASHER, 8
N o R tf ep o r ro du ct io
n
0010 0020 0030 0040 0050 0070 0080 0090 0100 0110 0120 0130 0140 0150 0160 0170
Footnotes
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
7
1754611
Engine Group - 20HP & 24HP NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
N o R tf ep o r ro du ct io
n
2990240
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
8
1754611
Engine Group - 20HP & 24HP QTY. DESCRIPTION
40G777-0129-B1 44M777-0819-B1 1717473 1735962 1930601 1727997 1727994 1727976 1727979 1727980 1925003 2834683 1734505 1736993 1735913 1730268 1736994 2820427 1736995 1732576 1735980 1737421A 1736105 1708264 1918199 1960649 1736996 1936228 1917356 1736999 1737000 1731214
1 1 1 1 4 1 1 1 1 1 4 1 1 2 1 2 2 1 1 1 1 1 1 1 1 1 2 4 4 4 4 2
* ENGINE, 20HP, B&S Twin (Engine Model: 40G777-0129-B1) * ENGINE, 24HP, B&S Twin (Engine Model: 44M777-0819-B1) VALVE, Shut-off HEAT SHIELD SCREW, Taptite, 5/16-18 x 5/8 HEAT SHIELD MUFFLER, B&S Twin BRACKET, Muffler Mount PIPE, Exhaust, RH PIPE, Exhaust, LH SCREW, Taptite, 1/4-20 x 1/2 CLIP, Wire CONTROL, Throttle (34.75" & 36.5") CLAMP, Hose UM5008 HOSE, Fuel 1-9920-247 CLIP, Hose SCREW, M8 x 35 WASHER, Lock, External Tooth, 3/8 WASHER, Flat, 9 PULLEY & HUB ASSEMBLY TIE GUIDE, Belt CLUTCH, Electric, Ogura WASHER, Hex 1/2 LOCKWASHER, 7/16 CAPSCREW, Hex Head 7/16-20 x 3-1/2 SCREW, M8 x 45 CAPSCREW, Hex Socket Head, 5/16-18 x 3/4, G8 LOCKWASHER, Spring, 5/16 WASHER, 8.4 NUT, 8 GASKET, Exhaust
N o R tf ep o r ro du ct io
0010 0010 0030 0040 0060 0070 0080 0090 0100 0110 0150 0160 0170 0190 0200 0210 0220 0230 0240 0250 0255 0260 0270 0280 0290 0300 0320 0330 0340 0350 0360 0500
n
REF NO PART NO.
Footnotes Note* To verify your specific engine model, please reference the ID Tag located on your engine. See your local Briggs & Stratton distributor for parts and service. The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
9
1754611
Controls Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
N o R tf ep o r ro du ct io
n
2988009a
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
10
1754611
Controls Group QTY. DESCRIPTION
1735940 1735952 1735847 1735941 1735918 1735917 1735959 1735957 1751841 1735950
1 1 1 1 1 1 1 1 1 1
0100-10 0100-20 0100-30 0110 0120 0130 0140 0150 0160 0170 0180 0190 0200 0210 0220 0230 0240 0250 0260 0270 0280 0290 0300 0310 0320 0330 0340 0350 0360 0370 0380 0390 0400 0410
1736459 1736458 1736461 1735910 1735911 1735974 1735595A 1727246 1727259 1727897 1727899 1728976 1728024 1738760 1727267 1735880 1736001 1735972 1752054 1735949 1735942 1735853 1727261 1735968 1727935 1735896 1735881 1735850 1728111 1735969 1735943 1735875 1735866 1735998
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 2 1 1 1 1 1 4 4 1 2 1 1 1 1 2
PEDAL, Forward RATCHET ARM PEDAL, Brake LEVER, Parking Brake LEVER, Brake ROD, Traveling ROD, Brake PULLEY, Tensioning PULLEY, Idler (Incl. Ref. Nos. 0100-10, 0100-20, 0100-30, 0520, 0530, 0730, 0740, 0750, 0800 & 0810) BALL BEARING, Pulley, 62032RS PULLEY ARM, Pulley, Tension HOLDER, Left HOLDER, Right SUPPORT, Switch LATCH, Brake Lock PEDAL, Reverse PAD, Foot Pedal LATCH, Cruise ROD, Cruise 5/16 Dia. x 2.83" BOLT, Shoulder, 5/16-18 x 1-5/8 SPACER, Foot Pedal ROD, Cruise Latch, 17" ROD, Parking Brake BUSHING, 0-9421-418 WASHER, Lock SPRING, Flat 0-9740-221 V-BELT, Li, BBT, 13 x 2580 PULLEY, Compensa C-00237/1 PEDAL, Forward Rubber BOLT, 0-9016-447 PEDAL, Brake Pad SPRING, TLZ 250.150.0530 Yellow SPACER, Pivot DISTANCE, Pedal 0-9521-288 BUSHING, 0-9462-202 BALL JOINT, CS 13 DIN 71802 M8, Silver CLIP, Linkage .250 dia SPRING, TZ 2x14x62, Yellow PEDAL, Forward, Top BOLT, Eye M6x80 BN1006 BOLT, M6 x 16 WASHER, 6.4
N o R tf ep o r ro du ct io
0010 0020 0030 0040 0050 0060 0070 0080 0090 0100
n
REF NO PART NO.
Footnotes
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
11
1754611
Controls Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
N o R tf ep o r ro du ct io
n
2988009a
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
12
1754611
Controls Group 1735936 1735963 1735946 1735920 1960223 1931277 1735855 1735990 1735991 1735925 1735921 1930601 1735924 1735938 1735873 1735989 1735934 1736000 1735874 1729576 1735476 1735933 2159181 1735994 1735935 1751843 1735964 1739135 1751842 1751840 1751844 1751845 1736456 1736462
QTY. DESCRIPTION 1 2 4 4 2 4 2 2 3 3 1 1 1 1 1 7 7 5 4 1 1 3 1 3 1 1 1 1 1 2 1 2 2 1
NUT, M8 SPINDLE, 2 x 20 PIN, Flex. 5 x 25 LOCK RING, 12 BOLT, Carriage, 5/16-18 x 1-1/4 NUT, Hex Flange, 5/16-18 BOLT, M10 x 40 WASHER, 10.5 WASHER, 10.0 NUT, M10 LOCK RING, 16 SCREW, Tap, 5/16-18 x 5/8 NUT, M10 NUT, M8 DIN 6923 8 Yellow, Tooth BOLT, M8 x 45 WASHER, 8.4 NUT, M8 WASHER, 8 BOLT, M8 x 75 BOLT, Shoulder 5/16-18 x 1-3/16 TRANSMISSION, Tuff Torq, K-46CW NUT, M6 SPRING WASHER, 14 x 26/0.2 NUT, M8 BOLT, M8 x 20 SPINDLE, 3.2 x 25 WASHER, 16 x 22 x 1 WASHER, 6 BUSHING, Pulley, Tension BOLT, M10 x 45 WASHER, 11 LOCK RING, 40 BEARING, Slide
n
0430 0440 0450 0460 0470 0480 0490 0500 0510 0520 0530 0540 0550 0560 0570 0580 0590 0600 0610 0630 0640 0650 0660 0670 0680 0690 0700 0710 0720 0730 0740 0750 0800 0810
N o R tf ep o r ro du ct io
REF NO PART NO.
Footnotes
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
13
1754611
Electrical Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
N o R tf ep o r ro du ct io
n
2988014a
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
14
1754611
Electrical Group 1736864 1731957 1727282 1930601 ----1730007 1931318 1960353 1960518 1920397 1728963 1925003 1716061 2101025 1960547 1717549 1717550 1729993 1722887 1726556 1716951 1722611 1732006 1732005 1738015 1716549 1721830 1713163 2816964 2860750 2823341 2821319 2816622 1677296 1713535 1735980 7073090 1732004 1960294 1726557 1735922 1735852 1736002 1735882
QTY. DESCRIPTION 1 1 1 4 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 1 1 5 1 1 1 1 2 1 1 7
HARNESS, Main FUSE SUPPORT, Battery SCREW, Hex Washer Head, Taptite, 5/16-18 x 5/8 BATTERY, 12V 230 CCA DRY HOLD DOWN, Battery BOLT, Carriage, 1/4-20 x 7/8 WASHER, Flat .25 PUSHNUT, 1/4 NUT, 1/4 ESNA SOLENOID, 12V SCREW, Hex Washer Head, TAPTITE, 1/4-20 x 1/2 SWITCH ASSEMBLY, Ignition (Includes Ref. Nos. 0130, 0140, 0150 & 0160) WASHER, 5/8 WASHER, Lock, Int. Tooth .62 NUT, Hex Flange, 5/8, IGN Switch COVER, Ignition Switch PLUG, Hour Meter (Use on 20HP Models) SWITCH, PTO SWITCH, RMO Module Only SWITCH, Head lights PLUG SWITCH, Push (Foot Pedal) SWITCH, Push NC (Seat) (Use with Standard Seat) SWITCH, Seat, Paddle (Use with Mesh Seat) CABLE, #6 10.0 Lg Red CABLE, #6 25.0 Lg Red CABLE, #6 20.0 Lg Black LOCKWASHER, Spring 1/4 NUT, Hex KEPS Lock, 5/16-24 CAPSCREW, Hex, 1/4-20 x 3/4 WASHER, Flat, 1/4 NUT, Hex, 1/4-20 BOOT, Insulator, Battery BOOT, Insulator, Red TIE, Self Lock 12V AUX. PLUG, With Cover SWITCH, NO (RMO) NUT, Flange, Whiz, 1/4-20 KEY, RMO Module MICROSWITCH, MKH 12 D13 S1 BEEPER, PF 27 A 29 EP/ WIRE, 9-8316-615 CABLE, Clip WSBH 1-0-1
n
0010 0010-10 0020 0030 0040 0050 0060 0070 0080 0090 0100 0110 0120 0130 0140 0150 0160 0170 0180 0190 0210 0220 0230 0240 0240 0250 0260 0270 0280 0290 0300 0310 0320 0330 0340 0350 0370 0380 0400 0410 0420 0430 0450 0470
N o R tf ep o r ro du ct io
REF NO PART NO.
Footnotes
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
15
1754611
Electrical Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
N o R tf ep o r ro du ct io
n
2988014a
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
16
1754611
Electrical Group REF NO PART NO.
QTY. DESCRIPTION
2834683 1736417 1736418 1731185 1717163
1 1 1 1 1
CLIP, Speed Wire CABLE, Harness CABLE, Adapter HOUR METER (Use on 24HP Models) KEY, Ignition (Set of 2)
N o R tf ep o r ro du ct io
n
0520 0530 0540 1170 1190
Footnotes
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
17
1754611
Hood, Grille & Dash Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
N o R tf ep o r ro du ct io
n
2988883a
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
18
1754611
Hood, Grille & Dash Group QTY. DESCRIPTION
1722110C 7102326 1728029C 1728030C 1727297C 1727279 1960295 1930641 1727293 1728089 1728090 1960518 1664847 1919381 1727999 1727296 1723451 1677371 1728973 1728974 1960392 1723123 1933896 1925003 1732030 1732031 1735878 1727280 1735879 1735868 1735989 1736000 1735934
1 1 1 1 1 1 12 12 1 1 1 2 2 2 1 1 2 2 1 1 3 1 3 1 1 1 2 1 1 4 4 4 4
HOOD, With Scoop DUCT, Air Inlet PANEL, Hood, Right PANEL, Hood, Left GRILLE HINGE, Hood, Left CAPSCREW, Hex Lock, 1/4-20 x 5/8 NUT, Hex Flange Lock, 1/4-20 DASHBOARD KNOB, Brake Lock KNOB, Cruise Lock NUT, Push Pal, 1/4 CAPSCREW, Hex Taptite, 5/16-18 x 3/4 WASHER, 5/16 COVER, Steering Shaft HEADLIGHT ASSEMBLY SOCKET ASSEMBLY (Included in Ref. 0200) BULB, 1141-12V 21CP (Included in Ref. 0200) REFLECTOR, Headlight (Included in Ref. 0200) LENS, Headlight (Included in Ref. 0200) SCREW, Phillips Head ROD, Dash Support NUT, Flange SCREW, Self Tap GUIDE, Hood, Left GUIDE, Hood, Right BRAID, Steel-Insert 0-9634-219 HINGE, Hood, Right BUMPER, Front BOLT, M8 x 20 WASHER, 8.4 WASHER, 8 NUT, M8
N o R tf ep o r ro du ct io
0020 0030 0050 0070 0090 0100 0110 0120 0130 0140 0150 0160 0170 0180 0190 0200 0200-10 0200-20 0200-30 0200-40 0220 0230 0240 0250 0260 0270 0280 0290 0300 0310 0320 0330 0340
n
REF NO PART NO.
Footnotes
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
19
1754611
Seat Deck & Fuel Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
N o R tf ep o r ro du ct io
n
2988773a
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
20
1754611
Seat Deck & Fuel Group QTY. DESCRIPTION
1735259C 1931333 1728007 1728006 1735976 1715917 1739535 1754213 1731300 1727265 1727268 1960667 1919381 1704724 1960686 1709256 1704728 1960282 1727266 1729576 1739537 1960536 1735854 1735989 1736000 1735869 1735937 1735894 1735867 1735932 1735878 1735914 1736993 1735999 1739934 1930591 1738013 1738014 1737848A 1931277
1 2 1 1 1 1 1 1 4 1 1 4 4 2 6 4 2 2 1 2 1 6 2 4 4 2 2 1 1 1 4 1 2 1 2 8 1 1 2 2
DECK, Seat With Foot Rests BOLT, Carriage, 5/16-18 x 3/4 PAD, Footrest, Right PAD, Footrest, Left TANK, Fuel 9-2770-244 CAP, Fuel POD, Cup Holder, Left SEAT SPACER SUPPORT, Seat LATCH, Seat SCREW, Flange 5/16-18 x 1 WASHER, 5/16 COVER, Spring NUT, Hex Flange, 5/16-18 (Qty 4 used with Mesh Seat) WASHER, Spring (Qty 2 used with Mesh Seat) SPRING, Compression (Use with Standard Seat) BOLT, Carriage, 5/16-18 x 3/4 (Use with Standard Seat) PIVOT, Seat BOLT, Shoulder, 5/16-18 x 1/8 POD, Lift, Right SCREW, Hex, 1/4-1/2 BOLT, M8 x 16 WASHER, 8.4 WASHER, 8 BOLT, M8 x 20 NUT, M8 DISTANCE, Lift 0-9521-289 BOLT, M6 x 30 NUT, M6 BRAID, Steel Insert 0-9634-219 HOSE, Air Escape 1-9920-248 CLIP, UM 5008 WASHER, 6.6 BUMPER, Rubber (Use with Mesh Seat) SCREW, Hex Flange, Whiz Lock, 5/16-18 x 3/4 (Use with Mesh Seat) SEAT, Mesh, Bottom SEAT, Mesh, Back SUPPORT, Mesh Seat (Use with Mesh Seat) NUT, Hex Flange, 5/16-18 (Use with Mesh Seat)
N o R tf ep o r ro du ct io
0020 0030 0040 0050 0060 0070 0080 0090 0100 0110 0120 0130 0140 0150 0160 0170 0180 0190 0200 0210 0220 0230 0240 0250 0260 0270 0280 0290 0300 0310 0320 0330 0340 0350 1370 1380 1390 1400 1410 1420
n
REF NO PART NO.
Footnotes
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
21
1754611
Mulching Flap Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
N o R tf ep o r ro du ct io
n
2988026a
The above parts group applies to the following Mfg. Nos.: 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
22
1754611
Mulching Flap Group REF NO PART NO.
QTY. DESCRIPTION
1736134 1736133 1736132 1736131 1736130 1736129 1736128 1736127 1736126 1736125 1736124 1736123 1736122 1736121
1 1 1 1 1 1 1 1 2 5 2 1 2 3
FLANGE, Mowing TUBE HOLDER FULL TUBE HANDLE SPLIT PIN SCREW, M8 x 45 NUT, M8 SCREW, M8 x 35 WASHER, 8 NUT, M8 SPRING CASING SCREW, M8 x 12
N o R tf ep o r ro du ct io
n
0010 0020 0030 0040 0050 0060 0070 0080 0090 0100 0110 0120 0130 0140
Footnotes
The above parts group applies to the following Mfg. Nos.: 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
23
1754611
Lift Group - Manual NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
N o R tf ep o r ro du ct io
n
2988020a
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
24
1754611
Lift Group - Manual QTY. DESCRIPTION
1735923 1735902 1735848 1735958 1735979 1735893 1735945 1735947 1735895 1735966 1735967 1735898 1735899 1735956 1722302 1960044 1727954 1729652 1728990 1727935 1731414 1730221A 1730264 1727985 1921333 1930601 1931277 1960252 1930641 1735881 1735920 2176012 1735964 1751847 1751848 1735927 1735925 1735986 1737015 1735796
1 1 1 1 2 2 2 2 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 2 2 1 4 6 4 8 4 1 2 4
MOWING MECHANISM HINGE, Front ARM, Lift ROD, Lift TIE ROD, Lift 0-8040-311 DISTANCE, Lift 0-9521-289 PIN, 0-9016-463 PIN, Mowing 1-9310-417 DISTANCE, Lift Hitch 0-9521-290 SPRING, 0-9746-460 SPRING, 0-9746-483 HANDLE, Extend, Left HANDLE, Extend, Right ROD, Lift GRIP, Black WASHER, 5/16 ROD, Lift 3/8 dia SPRING, Torsion CLEVIS, Lift SPACER, Pivot PIN, Hitch HANGER, Front DECAL, Height of Cut QUADRANT, Lift Height CAPSCREW, Hex Head, 5/16-18 x 1 CAPSCREW, Hex Head, 5/16-18 x 5/8 NUT, Hex Flange Lock, 5/16-18 BOLT, Carriage, 1/4-20 x 5/8 NUT, Hex Flange Whiz, 1/4-20 BUSHING, 0-9462-202 LOCK RING, 12 CLIP, Pin Safety SPINDLE BOLT, M12 x 30 NUT, Flange Lock, M12 NUT, M12 NUT, M10 V-BELT, Li, 17 x 1200 SPRING PIN NUT, M12
N o R tf ep o r ro du ct io
0010 0020 0030 0040 0050 0060 0070 0080 0090 0110 0120 0130 0140 0150 0160 0170 0180 0190 0200 0210 0220 0230 0240 0250 0260 0270 0280 0290 0300 0310 0320 0340 0350 0360 0370 0390 0400 0410 0420 0430
n
REF NO PART NO.
Footnotes
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
25
1754611
Wheels & Tires Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
N o R tf ep o r ro du ct io
n
2988024a
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
26
1754611
Wheels & Tires Group REF NO PART NO.
QTY. DESCRIPTION
1752972 1752971 1730181 1713409 1722676 1722717 2827794 2860183 2860202 1735988
2 2 2 2 4 4 4 8 2 8
WHEEL & TIRE ASSEMBLY, Rear, 7L x 8H2 WHEEL & TIRE ASSEMBLY, Front, 4.5A x 6H2 SPACER, Axle, Rear PM Hunter KEY, Parallel HUB CAP, 2.361 D, Grey Poly 1.3H, VIPER WASHER, Special, 2-1/2 RING, Klipring, EXT For .75 Dia Shaft blk WASHER, 3/4 WASHER, 3/4 WASHER
N o R tf ep o r ro du ct io
n
0010 0020 0030 0040 0050 0060 0070 0080 0090 0100
Footnotes
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
27
1754611
Decals Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
N o R tf ep o r ro du ct io
n
2990244
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
28
1754611
Decals Group REF NO PART NO.
QTY. DESCRIPTION
1753580 1753581 1731390 1731391 1735542 1731418 1734027 1735889 1735265 1722806 1735891 1735890 1737187 1730264
2 2 1 1 1 1 1 1 1 1 1 2 1 1
DECAL, Model, ELT2040RD DECAL, Model, ELT2440RD DECAL, Logo, Stripe, LH DECAL, Logo, Stripe, RH DECAL, XL RD DECAL, Logo, Steering Wheel DECAL, Tunnel DECAL, Fuel Level DECAL, Trans/Tow Release Lever DECAL, Ignition Switch White/Blk DECAL, Noise DECAL, Safety DECAL, Deck Width DECAL, Mower Height
N o R tf ep o r ro du ct io
n
0020 0020 0070 0080 0100 0110 0120 0130 0140 0150 0160 0170 0180 1240
Footnotes
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
29
1754611
Back Plate Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
N o R tf ep o r ro du ct io
n
2988766a
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
30
1754611
Back Plate Group 1735985 1735849 1735876 1735906 1735907 1735908 1735909 1735903 1735975 1735977 1735978 1735915 1735887 1735939 1735983 1735970 1735904 1735905 1736998 1735961 1735960 1735857 1735927 1735993 1735992 1735871 1751829 1735989 1735935 1735868 1735860 1735930 1735997 1735861 1735931 1735963 1739133 1739134 1930601
QTY. DESCRIPTION 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 1 4 4 4 4 6 12 14 2 2 2 2 2 5 5 1 1 2 6
TUNNEL BACKPLATE BRACE HOLDER, Back Plate, L.H. HOLDER, Back Plate, R.H. HOLDER, Collector, R.H. HOLDER, Collector, L.H. HITCH SWITCH, Full Collector TIE ROD, Bypass TIE ROD, Latch LATCH COVER, Switch PAD, Rubber TRANSITION PART SPRING, Collector Lock HOLDER, Adjustable, R.H. HOLDER, Adjustable, L.H. RUBBER EDGE CAPSCREW, Self Tap, 5,5 x 19 CAPSCREW, Self Tap, 4.2 x 9.5 BOLT, M12 x 30 NUT, M12 WASHER, 13 WASHER, 12 BOLT, M8 x 25 DIN 6921 8.8 NUT, Flange Lock, M8 WASHER, 8.4 NUT, M8 CAPSCREW, M8 x 40 BOLT, M5 x 16 NUT, M5 WASHER, 5.3 BOLT, M5 x 16 NUT, M5 SPINDLE PAD, Steel WASHER, 5.3 SCREW, Hex Washer Head, Taptit, 5/16-18 x 5/8
n
0010 0020 0030 0040 0050 0060 0070 0080 0090 0100 0110 0120 0130 0140 0150 0160 0170 0180 0185 0190 0200 0210 0220 0230 0240 0250 0260 0270 0290 0310 0320 0330 0340 0350 0351 0360 0370 0380 0450
N o R tf ep o r ro du ct io
REF NO PART NO.
Footnotes
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
31
1754611
Collector Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
N o R tf ep o r ro du ct io
n
2988007a
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
32
1754611
Collector Group 1735897 1736463 1735877 1735984 1735953 1736236 1735954 1751833 1735885 1735981 1735916 1735901 1735859 1735860 1735948 1735863 1735864 1751830 1751829 1735868 1751831 1751832 1735862 1735955 1736416
QTY. DESCRIPTION 1 1 2 1 1 1 1 1 1 1 1 1 1 6 1 2 2 2 2 2 15 1 4 1 6
FRAME, Top TUBE, Front BRACE TUBE, Bottom TUBE, Connecting REINFORCEMENT, Left REINFORCEMENT, Right HANDLE, Full COAT, Fabric TOP, Collector LEVER, Dumping HANDLE, Rubber BOLT, M5 x 12 BOLT, M5 x 16 PLUG, Plastic BOLT, M5 x 30 BOLT, M5 x 35 NUT, Flange Lock, M10 NUT, Flange Lock, M8 SCREW, M8 x 40 NUT, M5 SPRING, Flat BOLT, M5 x 25 REINFORCEMENT, Top SCREW, 6.3 x 32
n
0010 0020 0030 0040 0050 0060 0070 0080 0090 0110 0130 0140 0150 0160 0170 0180 0190 0200 0210 0230 0240 0250 0290 0310 0320
N o R tf ep o r ro du ct io
REF NO PART NO.
Footnotes
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
33
1754611
French Guard Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
N o R tf ep o r ro du ct io
n
2988189a
The above parts group applies to the following Mfg. Nos.: 2691076 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
34
1754611
French Guard Group REF NO PART NO.
QTY. DESCRIPTION
1737360 1737361 1737362 1737363 1737364 1735859 1735997 1735931 1735961 1737365 1737366
1 1 1 1 1 6 2 6 4 2 2
COVER, Clutch COVER, Mower Deck COVER, Roller, Left COVER, Roller, Right COVER, Side SCREW, M5 x 12 WASHER NUT, M5 SCREW, ST, 5.5 x 19 HOUSING PIN
N o R tf ep o r ro du ct io
n
0010 0020 0030 0040 0050 0060 0070 0080 0090 0100 0110
Footnotes
The above parts group applies to the following Mfg. Nos.: 2691076 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
35
1754611
40" Mower Deck - Belt & Idler Arm Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
N o R tf ep o r ro du ct io
n
2988004a
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
36
1754611
40" Mower Deck - Belt & Idler Arm Group 1735802 1735794 1735787 1735846 1735799 1735781 1735837 1735796 1735842 1735784 1735834 1735796 1735804 1735805 1735818 1751829 1735827 1735841 1735843 1735837 1751829 1735820 1751829 1751834 1735844 1735832 1735790 1735826 1735811 1737369 1735845 1735838 1735799 1735800 1735817 1735836 1735782 1735834 1735796 1751836 1735806 1735783 1735844 1735798
QTY. DESCRIPTION 1 1 1 1 2 2 2 4 1 2 1 1 1 1 1 1 1 1 2 2 2 6 6 2 6 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 2 2
COVER, Plastic 0-8547-369 MAIN BOARD FOOTING, Complete WASHER, Zinc, 9 NUT, M8 PULLEY, Belt 28 Z WASHER, 13 NUT, M12 WASHER PULLEY, Belt WASHER, 0-9220-727 NUT, M12 REINFORCEMENT REINFORCEMENT SCREW, M8 x 25 NUT, Flange Lock, M8 STUD WASHER SCREW, Zinc M8 x 20 WASHER, 13 NUT, Flange Lock, M8 SCREW, M8 x 40 NUT, Flange Lock, M8 SCREW, M6 x 16 WASHER, Zinc, 6.6 BELT, Two Side Tooth K+K20DS 1760 HOLDER, Complete STUD, 0-9321-263 ROLLER, W 3500-3712 FOOTING WASHER, Zinc, 9 WASHER, 8 NUT, M8 NUT, M8 SCREW, M8 x 20 10.9 ZN DIN 912 WASHER, 0-9221-222 PULLEY, Belt 9-3325-234, Complete WASHER, 0-9220-727 NUT, M12 SCREW, M8 x 25 REINFORCEMENT COVER, Pulley, Belt 0-8534-203 WASHER, Zinc, 6.6 NUT, M6
n
0010 0020 0030 0040 0050 0060 0090 0100 0110 0120 0130 0140 0150 0160 0170 0180 0190 0200 0210 0220 0240 0250 0260 0270 0280 0290 0310 0320 0330 0340 0350 0360 0370 0380 0390 0410 0420 0430 0440 0450 0480 0490 0500 0510
N o R tf ep o r ro du ct io
REF NO PART NO.
Footnotes
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
37
1754611
40" Mower Deck - Belt & Idler Arm Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
N o R tf ep o r ro du ct io
n
2988004a
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
38
1754611
40" Mower Deck - Belt & Idler Arm Group REF NO PART NO.
QTY. DESCRIPTION
1751835
2
NUT, Flange Lock, M6
N o R tf ep o r ro du ct io
n
0520
Footnotes
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
39
1754611
40" Mower Deck - Housing, Hitch, Arbors & Blades Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
N o R tf ep o r ro du ct io
n
2988005a
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
40
1754611
40" Mower Deck - Housing, Hitch, Arbors & Blades Group 1737368 1735791 1735807 1735780 1735819 1751829 1735823 1751839 1735822 1735831 1735812 1735792 1735824 1735809 1735793 1735815 1735835 1735840 1735814 1735803 1735810 1735797 1735808 1735821
QTY. DESCRIPTION 1 2 2 4 6 10 1 3 1 1 2 2 4 1 1 1 2 2 1 2 2 2 4 4
HOUSING , Mower Deck HOUSING , Spindle REINFORCEMENT BEARING, 6205 2 RS C 66IB SCREW, M8 x 35 NUT, Flange Lock, M8 SHAFT TONGUE, 6 H 9 x 6 x 28 SHAFT TONGUE, 6 H 9 x 6 x 63 RING, Safety 25 HOUSING SHEAR STUD, 0-9311-736 BLADE, Right Rotary BLADE, Left Rotary SCREW, M10, 0-9011-287 WASHER, 0-9220-749 WASHER, BN 806-40 x 16.3 x 2 x 3.1 SCREW, 0-9011-283 M10, Left Thread QUICK FASTENER, 0-9026-246 RING, 13 x 2 NBR NUT, M12 CUTTING WHEEL, Right ETOP 100-8.2 SCREW, M8 x 90
n
0010 0020 0030 0040 0050 0070 0080 0100 0110 0120 0130 0140 0150 0160 0170 0180 0190 0200 0210 0220 0230 0240 0250 0260
N o R tf ep o r ro du ct io
REF NO PART NO.
Footnotes
The above parts group applies to the following Mfg. Nos.: 2691075 - Regent 2691076 - Regent 2691077 - Regent 2691078 - Regent
© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
41
1754611
n
N o R tf ep o r ro du ct io
Hardware Identification & Torque Specifications Torque Specification Chart
Torque Specification Chart
FOR STANDARD METRIC MACHINE HARDWARE (Tolerance ± 20%) 5.6
8.8
Class 5.6
10.9 Class 10.9
Class 8.8
SAE Grade 2
Class 12.9
Size Of Hardware
Nm.
in/lbs ft/lbs
Nm.
in/lbs ft/lbs
Nm.
in/lbs ft/lbs
Nm.
M3 M4 M5 M6 M7 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39
.56 1.28 2.50 4.3 7.1 10.5 21 36 58 88 121 171 230 295 435 590 800 1030 1340
13.44 30.72 60.96 7.3 12.1 17.7 35 61 101 147 202 290 390 497 733 995 1349 1740 2249
1.28 19.2 2.90 43.44 5.75 5.97 9.9 10.3 16.5 16.9 25 24 50 48 83 86.2 136 132 210 200 287 275 405 390 559 530 708 375 995 1032 1350 1401 1830 1902 2360 2441 3050 3163
1.80 4.10 8.10 14 23 34 67 117 185 285 390 550 745 960 1400 1900 2580 3310 4290
22.92 52.56 7.15 12.1 19.9 29 59 103 162 250 346 486 656 840 1239 1681 2278 2935 3798
2.15 4.95 9.7 16.5 27 40 81 140 220 340 470 660 890 1140 1680 2280 3090 3980 5150
20
10
30
40
50
60
80
70
90
Body Length
Screw, M8- 1.25 x 25
Thread Diameter (mm) Threads Inside Diameter (in) per inch
1/4
1/2
1 3/4
2.1 2.3 3.1 3.5 7.6 8.6 15.0 16.3 27.2 31.3 40.8 47.6 68.0 74.8 88.4 102.0 122.4 136 217.6 244.8 190.4 210.8 299.2 326.4
Body Length (mm) Body Length (in)
in/lbs ft/lbs 30 31 43 49 8 10 17 19 30 35 50 55 75 90 110 120 150 180 260 300 400 440 580 640
SAE Grade 8
Nm.
in/lbs ft/lbs
Nm.
3.4 3.5 4.9 5.5 10.9 13.6 23.1 25.8 40.8 47.6 68.0 74.8 102.0 122.4 149.6 163.2 204.0 244.8 353.6 408.0 544.0 598.4 788.8 870.4
41 43 60 68 12 14 25 29 45 50 70 80 110 120 150 170 220 240 386 420 600 660 900 1,000
4.6 4.9 6.8 7.7 16.3 19.0 34.0 34.0 61.2 68.0 95.2 108.8 149.6 163.2 204.0 231.2 299.2 326.4 525.0 571.2 816.0 897.6 1,244.0 1,360.0
NOTES
1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews. 2. Recommended seating torque values for locknuts: a. for prevailing torque locknuts - use 65% of grade 5 torques. b. for flange whizlock nuts and screws - use 135% of grade 5 torques. 3. Unless otherwise noted on assembly drawings, all torque values must meet this specification.
Screw, 1/2- 16 x 2
Nut, 1/2-16 0
Distance between threads (mm) Threads per inch
Thread Diameter (mm) Body Diameter
SAE Grade 5
Nm.
100
Body Diameter
Nut, M8
19 20 27 31 66 76 11 12 20 23 30 35 50 55 65 75 90 100 160 180 140 155 220 240
8-32 8-36 10-24 10-32 1/4-20 1/4-28 5/16-18 5/16-24 3/8-16 3/8-24 7/16-14 7/16-20 1/2-13 1/2-20 9/16-12 9/16-18 5/8-11 5/8-18 3/4-10 3/4-16 7/8-9 7/8-14 1-8 1-12
The guides and ruler furnished below are designed to help you select the appropriate hardware.
0
in/lbs ft/lbs
N o R tf ep o r ro du ct io
in/lbs Size Of Hardware ft/lbs 5.88 13.44 26.4 44.64 5.2 7.7 15 26 42 64 89 126 169 217 320 435 590 759 988
No Marks
Hardware Grade
12.9
n
Property Class
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
1/4
1/2
2 3/4
1/4
1/2
3 3/4
1/4
1/2
4
Common Hardware Types
3/4
Hex Head Capscrew
Washer
Standard Hardware Sizing When a washer or nut is identified as 1/2” (M8), this is the Nominal size, meaning the inside diameter is 1/2 inch (8mm metric thread diameter); if a second number is present it represents the threads per inch (distance between threads). When bolt or capscrew is identified as 1/2 - 16 x 2” (M8 - 1.25 x 50 ), this means the Nominal size, or body diameter is 1/2 inch (8mm metric thread diameter), the second number,16, represents the threads per inch, (1.25 thread diameter). The final number is the body length of the bolt or screw, 2 inches (50mm).
Lockwasher Carriage Bolt Hex Nut
Wrench & Fastener Size Guide
1/4” Bolt or Nut Wrench—7/16”
5/16” Bolt or Nut Wrench—1/2”
3/8” Bolt or Nut Wrench—9/16”
M6 Bolt or Nut Wrench—10mm
M8 Bolt or Nut Wrench—13mm
M10 Bolt or Nut Wrench—17mm
7/16” Bolt or Nut 1/2” Bolt or Nut Wrench (Bolt)—5/8” Wrench—3/4” Wrench (Nut)—11/16” M12 Bolt or Nut Wrench—19mm
M14 Bolt or Nut Wrench—22 mm
n N o R tf ep o r ro du ct io IT IS THE POLICY OF BRIGGS & STRATTON CORP. TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS.
Briggs & Stratton Yard Power Products Group 3515 N. 124 Street / PO Box 702 Wauwatosa, WI 53222 USA www.simplicitymfg.com © Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
