Transcript
ZAXIS series Forest Machine
FOREST MACHINE
Indonesia
110 MF
A P P L I C A T I O N
Model Code
ZX110MF
Engine Rated Power
63 kW (84 HP)
Backhoe Bucket (ISO Heaped)
0.45 m3
Operating Weight
14 040 kg
&
A T T A C H M E N T
The Forester ZX110MF Is Purpose Built for Harsh Logging Work The Hitachi forester Z X110MF comes with advanced technologies, including impressive cooling ability to well suppress overheating, and the fuel-efficient noncommon rail type engines for productive forestry operations.
Reinforced forestry arm Reinforced forestry boom Exclusive cab guards (Optional)
For Indonesia The forester ZX110MF, built on years of operating experience in Indonesia, offers high productivity and durability what customers expect most on tough forestry job sites.
Exclusive body guards (Optional) Net cover (Only air intake side) Durable, reliable engine
By HITACHI The ZX110MF, designed and built on Hitachi original technologies and manufacturing prowess, to allow for productive, reliable forestory work.
960 mm single high grouser shoes (Optional)
Skidding bar (Optional) Exclusive reinforced undercarriage Robust fix grapple (Optional)
Performance Emissions Control Engine (Non-Common Rail Type)
Robust Forestry Undercarriage
The engine complies with the US EPA Tier 2 and EU Stage II Emission Regulations.
Low Noise
Low noise muffler
Engine compartment noise is well suppressed with a low-noise muffler, resin fan, fun guide and likes for low-noise operations.
595
The forestry undercarriage is rugged enough to move about in woods and deliver plenty of traction force. A low ground pressure also helps increase high mobility. The forestry undercarriage is high and wide: Ample ground clearance and wide track gauge reduce striking against obstacles such as stubs and stumps.
mm
2 040 mm 960 mm
Fan guide ring
wide shoe
N-type fan
Maintenance
Exclusive Guards for Forestry Cab and Body Forestry Cab Guard The forestry cab is protected with a cab guard at front, top and rear for surrounding obstacles. The guard at the top can be opened for emergency evacuation. Body Guards The body is protected with body guards on the top and both sides. The top guard serves to protect the engine; and side body guards to protect the radiator and hydraulic pumps.
Keeping Cool The radiator is well encapsulated to prevent its heated air discharge, keeping the engine and hydraulic oil cool even in high-temperature environments.
Dust Prevention Nets The engine and radiator compartments are provided with dust-prevention nets to keep clean inside, reducing the entry of airborne debris and dust. Cab Guards
Durability
Forestry Boom and Arm
Upper side
Lower side
Body Guards
The forestry boom is strengthened with thicker plates than a standard boom and by additional welding. The forestry arm is strengthened with thickened plates and build-up welding.
Strengthened Track Components
Previous : Bending type
welded place
Idler brackets are redesigned by changing construction and by using thicker plates for toughness. Upper rollers are supported at both ends, and side frame tops are sloped to let muck and stems slide away easily. Four track guards on each track keep track links to be engaged on soft ground. Idlers, track springs and adjuster cylinders are all strengthened too. Adjuster cylinder stroke is extended up to 30 %. Insert-type idler yokes are utilized to suppress jolts.
Added plate, urethane and rubber (Upper)
Thickened steel plates
Door,Engine cover with net
New : Build-up type
welded place
14 mm
Added plate,urethan ana rubber (lower)
Idler track spring and adjuster cylinder
19 mm
Crank Type Skidding Bar (Optional) The Hitachi crank type skidding bar delivers high lifting power and traction force to take out logs entrapped by obstacles in logging operations.
Door
Electrodeposited Body Painting Idler brackets
Upper rollers
The cab and body are electrocoated by electrodeposition practice by electrolysis for corrosion protection. In particular, this coating is effective at corrosion-prone points, such as flat surfaces, edges and box structures. Also, this coating leaves no spattering traces due to spray painting, keeping smooth painting finish. Four track guards
Skidding Bar in logging operations
Engine cover
SPECIFICATIONS ENGINE
SERVICE REFILL CAPACITIES
Model . ....................... Type . ......................... Aspiration . ................. No. of cylinders .......... Rated power ISO 9249, net . ....... SAE J1349, net ...... Maximum torque ........ Piston displacement ... Bore and stroke ......... Batteries ....................
Isuzu BB-4BG1T 4-cycle water-cooled, direct injection Turbocharged 4
DIMENSIONS
Fuel tank .................................................................................... 250.0 L Engine coolant ............................................................................. 19.0 L Engine oil . .................................................................................... 15.8 L Swing device .................................................................................. 3.2 L Travel device (each side).................................................................. 3.5 L Hydraulic system ........................................................................ 130.0 L Hydraulic oil tank .......................................................................... 69.0 L
63 kW (84 HP) at 2 150 min-1 (rpm) 63 kW (84 HP) at 2 150 min-1 (rpm) 340 N·m (35 kgf·m) at 1 600 min-1 (rpm) 4.329 L 105 mm X 125 mm 2 x 12 V / 55 Ah
Unit: mm ZX110MF
M
E
WEIGHTS AND GROUND PRESSURE
D,D’
Equiped with 4.27 m boom, 2.26 m arm and 0.45 m3 bucket (ISO heaped), 1 800 kg counterweight.
HYDRAULIC SYSTEM
Shoe type
Shoe width
kg
Triple grouser
800 mm
14 040
26 (0.27)
Single high grouser
960 mm
14 550
23 (0.23)
F
Weights of the basic machines [including 1 800kg counterweight and triple grouser shoes, excluding front-end attachment, fuel, hydraulic oil, engine oil and coolant etc.] are:
Travel ......................... 2 variable displacement axial piston motors Swing . ....................... 1 axial piston motor
Shoe width
Relief Valve Settings Implement circuit . ...... Swing circuit .............. Travel circuit . ............. Pilot circuit .................
34.3 MPa (350 kgf/cm2) 31.4 MPa (320 kgf/cm2) 34.3 MPa (350 kgf/cm2) 3.9 MPa (40 kgf/cm2) Rod diameter
Boom
2
95 mm
70 mm
Arm
1
105 mm
75 mm
Bucket
1
95 mm
65 mm
11 470 kg 11 980 kg
1 800 kg
4.27 m boom(with arm cylinder)
870 kg
2.26 m arm(with bracket for fix grapple,bucket cylinder)
640 kg
2.80 m arm(with bucket cylinder)
610 kg
Fix grapple 0.45 m3 bucket
Arm length
Revolving Frame
D-section skilt for resistance to deformation.
Swing Mechanism
Axial piston motor with planetary reduction gear is bathed in oil. Swing circle is single-row. Swing parking brake is spring-set/hydraulic-released disc type.
Independent roomy cab, 1 005 mm wide by 1 675 mm high, conforming to ISO* Standards. * International Standardization Organization
2 840
A B
9 8
650 kg
7
7
400 kg
6
6
5
5 4
C
3
3
1
1 0
2
Arm crowd force ISO
55 kN (5 600 kgf)
48 kN (4 900 kgf)
0
Arm crowd force SAE : PCSA
52 kN (5 300 kgf)
47 kN (4 800 kgf)
1
Boom and arms are of welded, box-section design. Bucket is of welded steel structure. Side clearance adjust mechanism provided on the bucket joint bracket.
4
Buckets
6 Recommendation 2.26 m 2.80 m arm arm
Ground Line
Suitable for materials with density of 1
C D
Ground Line
1 2
B
3
B
4
5 7
E
2
3
5
5
A 12 11 10 9
8
7
6
5
4
A’ A
6 3
2
1
7
0 meter
12 11 10 9
800 kg/m3
7
6
5
4
3
2
1
0 meter
Illustration show 2.26 m Arm length
FIX GRAPPLE or less
BACKHOE BUCKET
Unit:mm 2.26 m arm (with Fix grapple)
Unit:mm 2.26 m arm 2.80 m arm (with 0.45m3 bucket) (with 0.45m3 bucket)
A Max. working reach
7 790
B Max. working depth
4 910
A Max. digging reach
7 700
8 180
8 420
A' Max. digging reach (on ground)
7 530
8 020
C Max. working height Excluding track shoe lug
Traction Device
Each track driven by 2-speed axial piston motor. Parking brake is springset/hydraulic-released disc type. Automatic transmission system: High-Low.
B Max. digging depth
4 880
5 430
C Max. cutting height
8 320
8 570
D Max. dumping height
5 910
6 170
2 330
2 590
E Min. swing radius Excluding track shoe lug
Travel speeds .............. High : 0 to 4.2 km/h Low : 0 to 2.4 km/h Maximum traction force .. 130 kN (13 300 kgf) Gradeability ................. 70% (35 degree) continuous
8
400 kg 410 kg
2 750 ** 2 690
meter 10
meter 10
78 kN (8 000 kgf)
1 010 mm
7 220
WORKING RANGES
90 kN (9 200 kgf)
890 mm
7 220
With 2.80 m arm (with 0.45 m3 bucket) N Overall height of boom
78 kN (8 000 kgf)
m3
With 2.26 m arm (with Fix grapple)
With 2.26 m arm (with Fix grapple)
4
Weight
3 000 940
M Overall length
90 kN (9 200 kgf)
* 0.45
2 6 42 4
3 000
K Overall width
9
* Side-pin-type bucket
Numbers of Rollers and Shoes on Each Side
SHG 960
2 840
Bucket digging force ISO
0.45 m3
Heat-treated connecting pins with dirt seals. Hydraulic (grease) track adjusters with shock-absorbing recoil springs.
G 800
Bucket digging force SAE : PCSA
ISO heaped
Tracks
Track shoe width
2.80 m
Width No. Of Without side With side teeth cutters cutters 890 mm 1 010 mm 5
595 2 040
J Undercarriage width
2.26 m
Capacity
UNDERCARRIAGE
2 950
8
BACKHOE ATTACHMENTS
Operator's Cab
F Overall height of cab
*L Track height with triple grouser shoes
Fixed Grapple is Optional equipment
2
Swing speed .............. 13.9 min-1 (rpm) Swing torque . ............ 31.0 kNm (3 160 kgfm)
2 600
* Excluding track shoe lug SHG : Single high grouser shoe ** The dimension is shown in the transportation hole position of the arm
BUCKET AND ARM DIGGING FORCES
UPPERSTRUCTURE
2 130
E Overall width of upperstructure
With 2.80 m arm (with 0.45 m3 bucket)
Weight
Bore
Upper rollers .............. Lower rollers .............. Track shoes ............... Track guards . ............
Triple grouser 800 mm Single high grouser 960 mm
Counterweight
Quantity
2 130
D' Rear-end length
Weight
Component weights
Hydraulic Cylinders
C
L
H J,K
Basic Machine Weight
Hydraulic Motors
1 100
D Rear-end swing radius
I
N
I
WEIGHT: BASIC MACHINE and COMPONENTS
2 variable displacement axial piston pumps 2 x 100 L/min 1 gear pump 33 L/min
3 790
*C Couterweight clearance
H Track gauge
G
Main pumps ............... Maximum oil flow . . Pilot pump ................. Maximum oil flow . .
2 990
*G Min. ground clearance
kPa(kgf/cm2)
Hydraulic Pumps
A Distance between tumblers B Undercarriage length
LIFTING CAPACITIES (Without Bucket) Notes: 1. Ratings are based on ISO 10567. 2. Lifting capacity does not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3. The load point is the center-line of the bucket pivot mounting pin on the arm. 4. *Indicates load limited by hydraulic capacity. 5. 0 m = Ground.
A
A: Load radius B: Load point height
B
C: Lifting capacity
C
For lifting capacities, subtract bucket and quick hitch weight from lifting capacities without bucket.
ZX110MF Conditions
Load point height m
1.5 m
Boom 4.27 m 4.5 Arm 2.26 m 3.0 Without Bucket 1.5 Shoe 800 mm 0 (Ground) -1.5 *4 990 *4 990 -3.0
Load radius 3.0 m 4.5 m
6.0 m
At max. reach Conditions meter
*4 640 *4 640 *6 500 6 170 *7 110 5 940 *6 710 5 930 *5 310 *5 310
*2 880 *2 880 *3 430 *3 430 *2 810 *4 110 3 360 *3 220 4 540 3 240 3 230 4 440 3 200
EQUIPMENT
*1 720 2 280 *1 710 2 210 *1 820 2 160 *2 100 *2 700 *3 310
*1 720 *1 710 *1 820 2 040 2 350 *3 310
5.79 6.32 6.47 6.26 5.65 4.46
Load point height m
Rating over-front 1.5 m
Rating over-side or 360 degrees
Load radius 3.0 m 4.5 m
meter
Boom 4.27 m 4.5 Arm 2.80 m 3.0 Without Bucket 1.5 Shoe 800 mm 0 (Ground) -1.5 *4 450 *4 450 -3.0 *7 610 *7 610
*3 890 *3 890 *5 950 *5 950 *7 060 6 050 *7 040 5 970 *6 080 6 040
*2 530 *2 530 *2 140 *2 140 *1 540 *3 120 *3 120 *2 790 2 360 *1 540 *3 900 3 470 *3 110 2 280 *1 640 *4 480 3 310 3 290 2 210 *1 860 *4 600 3 240 3 260 2 190 *2 330 *3 990 3 280 *3 260
: Standard equipment
HYDRAULIC SYSTEM Control valve with main relief valve Full-flow filter Pilot filter Suction filter One extra port for control valve Work mode selector CAB All-weather sound suppressed steel cab AM-FM radio with digital clock Ashtray Auto control air conditioner Cab (Center pillar reinforced structure) Drink holder Electric double horn Engine shut-off lever Evacuation hammer Floor mat Footrest Front window washer Front window on upper,lower and left side can be opened Glove compartment Intermittent windshield wipers OPG top guard Level I (ISO10262) compliant cab Pilot control shut-off lever Rear tray Seat belt Seat:Frabric seat Seat adjustment part:backrest,armrest,height and angle,slide forward/back Short wrist control levers Storage box 4 fluid-filled elastic mounts 24 V cigarette lighter
MONITOR SYSTEM Alarm buzzers: Engine oil pressure and engine overheat Meters: Hourmeter and trip-meter,engine coolant temperature gauge and fuel gauge. Pilot lamps: Engine preheat,work light,auto-idle,autoacceleration,digging mode and attachment mode. Warning lamps: Alternator charge,air filter restriction and minimum fuel level. LIGHTS Additional cab roof front lights Additional boom light with cover 2 working lights UPPER STRUCTURE Fuel level float Gap filled radiator Hydraulic oil level gauge Tropical cover Side bumper & cab guard bracket Cab guards and Body guards Rear view mirror (right &left side) Reinforced undercover Swing parking brake Tool box Undercover Utility space With net door and cover 1 800 kg counterweight 2 x 55 Ah batteries
Hitachi Construction Machinery Co., Ltd. www.hitachi-c-m.com
At max. reach
6.0 m
*1 540 *1 540 *1 640 *1 860 2 110 2 750
6.32 6.81 6.95 6.75 6.19 5.14
Standard and optional equipment may vary by country, so please consult your Hitachi dealer for details.
ZX110MF ENGINE Auto idle system Cartridge-type engine oil filter Cartridge-type fuel pre-filter Cartridge-type fuel main filter Double air filter Dust-Proof indoor net E-P control system Engine warm-up device Fan guard Radiator reserve tank Water separator 50 A alternator
Unit : kg
: Optional equipment
UNDERCARRIAGE Bolt-on sprocket Reinforced track links with pin seals Reinforced upper rollers Reinforced idler bracket Reinforced track undercover Skidding bar Hydraulic track adjuster Upper and Lower rollers 4 track guards (each side) 800 mm triple grouser shoes 960 mm single high grouser shoes FRONT ATTACHNENTS Centralized lubrication system Dirt seal on all bucket pins Flanged pin HN bushing Reinforced resin thrust plate Link A Link B WC (tungsten-carbiide) thermal spraying Fixed grapple 0.45 m3 bucket (ISO heaped) 0.45 m3 bucket (ISO heaped) (side pin type for Point tooth) 4.27 m reinforced boom (with bushing) 2.26 m reinforced arm (with grapple bracket) 2.8 m arm (for bucket) MISCELLANEOUS Lockable fuel refilling cap Lockable machine covers Onboard information controller Skid-resistant tapes,plates and handrails Standard tool kit Travel direction mark on track frame Global e-Service
These specifications are subject to change without notice. Illustrations and photos show the standard models, and may or may not include optional equipment, accessories, and all standard equipment with some differences in color and features. Before use, read and understand the Operator’s Manual for proper operation.
KA-EN193IDP
14.08 (KA/KA,FT3) Printed in Japan
