Transcript
Foreword This is a new type of multifunctional hi-tech product with integration of high-definition camera shooting, photographing, recording and outlay TF card memorizer. It carries High-Definition Multimedia Interface (HDMI) which can transit in high quality uncompressed high-definition video and multichannel voice data. It is mainly used for on-vehicle shooting to improve the efficiency of taking evidence of traffic accident, and also can bring wonderful experiences to daily life, traveling, and outdoor activities.
Product Feature
With the mini size and a 120 Degree A+ bugeye lens of high resolution, it highly facilitates high-definition multiangle shooting and photographing under various situations. Built-in 1million 1/3.2 inch photosensitive element of low noise and high definition, it can capture ultra definition pictures under dark surroundings. 2.0 inch high-resolution LCD that allows screen viewing along side with video recording. HDMI Export Support that can be connected to high definition TV; It provides the watermark function of time and date that can synchronously display the time and date while shooting and photographing. It adopts cyclic covering record mode that allows continuous rolling record through the coverage of new frames over old ones. It support micro SD card that interchange of file copy can be achieved. Powerful file protection that can fully save video files even when sudden power loss or machine breakdown occurs during recording. Built-in lithium battery that allows video recording under battery charging. It provides preview function under auto photographing for the selection of ideal image. Built-in microphone / loudspeaker TF card support as large as 32 GB motion detection videoing function 180°inversion videoing/ photographing
Product Structure:
1． Micro SD slots 2． reset button 3． indicator light 4． Holder Screw Hole 5． display screen 6． video/photograph button 7． Mode Switch button 8． Menu Button 9. SOS button 10. Microphone 11. lens ring 12. lens 13. Loudspeaker 14. USB Interface 15. HDMI Interface 16. On / Off Button
Instruction for Buttons: The function is defined as follows: Name of button
function description
video/photograph button Rec button
1. Short press to enter videoing or photographing. 2. Use the UP button to make upside selection in the menu. 3. Replay mode, use the UP button for upside selection of files.
Mode Button
1.Mode switch 2. Use the UP button to make downward selection in the menu.
Menu Button
1. To enter and exit the menu.
Enter Button SOS button
1. 2. 3. 4.
Longer Press to start/ shut the night vision light. Short press to lock/ unlock video files during videoing. Short press to enter different selections in the menu. Short press to play /suspend under video replay.
Short press to start / 2-second long press to shut.
On/Off Button
Indicator Light Instruction: Name
Instruction
Charging Indicator Light
Red indicator light means charging state; while the light will be off upon charge completion.
working indicator
A green indicator will be on when the machine starts; a blinking light means videoing.
Battery charge 1. Connect the vehicle charger directly to the camera USB interface for charging; it can be charged even under the shutdown state.
2. For USB charging, connect the camera to a computer with USB data line and it will work immediately; a shutdown state still allows charging.
To fix and remove the TF card 1. Follow the indicatd direction to insert the TF card into the TF card slot until it is fastened. 2. To remove the TF Card, slightly press the TF Card until it pop out.
Note: 1. Once the TF Card is fixed, it will be set as default storage device so that original files in such TF Card cannot be read. 2. When incompatibility occurs, reinsert the card again or try another TF card.
3.
Please use high speed TF card.
User Guide A) Camera Start and Shut 1. Press
power button for 1 second to start the camera/2S to shut down.
B). change working mode Shortly press MODE button to change，
for Video mode，
for photographing，
for playback mode，as they are displayed on the left top of the screen.
To Login the System Setting Press the MENU twice to enter "system setting". Date/time: set the date and time Auto Shutdown: set the auto shutdown time; Volume: set the volume higher or lower; Language Setting: menu for language option; Frequency: set at 50Hz/60Hz (current frequency); TV Export: set NTSC/PAL; System Reset: restore factory settings; Version: software version number. Anti-shaking function: on/off Image rotation: on/off (The frame can be rotated 180 degree) Screen savers: off/1Minute/3 Minute/5 Minute
How to make recording and Options settings 1. Recording When the camcorder enter into the recording mode and it will have a mark like this icon appears on the left top of the screen, press the OK button to start recording , the red ● recording indicator will flash. When you press the OK again, recording will stop and the red ● recording indicator will disappear.
2. The recording options settings Press MENU button to enter recording settings Resolution：1920*1080P/1280*720P/720*480P/640*480P/320*240P Cycle recording：Off /3 minutes/5 minutes/10 minutes Motion detecting: On/Off Date and time record: on / off Audio record: on/off G-SENSOR:off/low/middle/high
How to take photos and camera option settings 1. Turn the power on, the device will enter to recording mode, short press and hold the MENU button to switch camera mode, then, this icon 2. 3. 4.
5.
will appear on the top left, device enter
into camera mode. Focusing on the Object to take photos and its will can be adjust the zoom via press up/down button. Press the OK button, camera will start to take photo. Self-snapshot function In camera mode, press the Menu button to select the photo taking mode, press “Down” button to select “single shot, two seconds , five seconds, ten seconds and continuously take shots . Press the MENU button to enter into the photo settings:
Capture mode: single photo shot/ self-snapshot timing with (two sec./five sec./ten sec.) and continuous shooting. Resolution：12M/8M/5M/4M /3M/1.3M Quality：Super fine, fine and normal Sharpness：Strong, normal and soft White balance：Auto/daylight/cloudy/tungsten/fluorescent Color：Normal/black-white/sepia ISO：Auto/100/200/400 EV compensation：-2.0- +2.0 Face detection：Off/Face detection/smile detection Anti-shaking：Off / On Quick review：Off /2 seconds /5 seconds Date stamp：Off/Date/ Date & time
Playback Mode 1. On the recording mode, short press Menu button twice to select single file playback mode and press the Up and Down button can browse photos and videos information. 2. When appear this icon
on the top left of the screen, means files will can be
playback, press ok button to play or pause. During playback, press up button to increase the volume and down button to decrease the volume. Also, when appear this icon
on the
top left of the screen, it means photo files can browse, press Up button and Down button to browse photos. 3. Delete In playback mode, press Menu button, you can see the delete and formatting options, press the Up/Down button to select the file that you want to delete, press OK button to enter to “delete the current file” and “delete all”, then press OK button to enter into delete file, press OK again to confirm delete file. Press the Up/Down button to select formatting option, press OK to enter formatting options, then press OK button format file and press OK again to confirm format file.
Information Backup USB Backup Mode Use USB cable to connecting with PC, press the power button, you will can see the following selection, select “storage” and press OK button. Then, open the icon as “My Computer” on the desktop, there will appeared a removable disk on the PC, you could find the files from removable disk/DCIM document.
Remarks： 1. Computer operating system ： above the Windows 2000/XP/Vista/Windows 7, 10.3.6 2. Select PC camera, it can used as webcam. 3. Select PICBRIDGE to connect with the printer to print pictures. 4. Pull out the USB cable ,device will power off.
MAC OS x
Note: This device can use as portable disk when if its on ,do not need to install CD driver.
Connect to TV to display photos/videos 1.Connect HD TV via HDMI cable ,its can playback video or browse photos. Technical Specifications LCD
2 Inch HD
LTPS(4:3)
Lens
120 degrees A+ grade high resolution wide angle lens
Language
English,Germany,French,Spanish,Italic,Portugal,TraditionalChinese, Simplified Chinese, Japanese, Russian, Polish
Video
1920*1080P/1280*720P/720*480P/640*480P/320*240P
Video format
AVI
Photo Size
12M/8M/5M/4M /3M/1.3M
Photos format
JPEG
Flash record
1 sec flash record
Storage medium
Micro SD Card (Up to 32GB)
Microphone/Speaker
Built-in
Camera mode
Single shoot/ Timer self photo taking (two seconds timer, five seconds timer, ten seconds timer) and continuous shooting
Light Frequency
50Hz/60Hz
Television Output
NTSC/PAL
USB interface
USB 2.0
Power
5V 1000MA
Battery
3.7V 500MA
System
Above Windows 2000/XP/Vista/Windows 7, MAC OS x 10.3.6
Appendix Troubleshooting Guide Operating Troubles
Possible Causes
Can’t power on
1. Battery may be too low.
Battery charging
can’t
to
1. Please check the charger whether connecting correctly or not? 2. The battery may doesn’t work. The performance of a battery will decrease after a few years.
Can’t record
1. May be no Micro Card in the device. 2. After power on, if it points out there is something wrong with TF card or can not store the video files, please format the TF card from device itself and try again.
Blurry images
1.
Can not be connected to PC
1. The USB cable may be connected incorrectly. 2. Wrong setting.
No images on TV
1.
System crash down 1. (no pictures or pictures don’t move and also don’t work after pressing any button)
The lens may be dirty.
HDMI cable may not be connected tightly and correctly. Pull out the battery, press the reset button.
