Transcript
® ®
SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031
Parts List for:
SPX Corporation 655 Eisenhower Drive Owatonna, MN 55060-0995 USA Phone: (507) 455-7000 Tech. Services: (800) 533-6127 Fax: (800) 955-8329 Order Entry: (507) 455-1480 Fax: (800) 283-8665 International Sales: (507) 455-7223 Fax: (507) 455-7746
4044 4044-50-110 4045 4046 4046-50-110 4047 99150-B HE172 HE174 P116-10 PA172 PA174 PE17-PARK
Form No. 100577 PE17-SOLO PE172 PE172-ABC PE172-ET-230 PE172-FS PE172A PE172A-BOC PE172A-DAYCO PE172A-EZE PE172A-FINN PE172A-GRC PE172A-ITR PE172AF-CLEV PE172AH-CLEV
PE172AM PE172AM-50-220 PE172F-CLEV PE172H-CLEV PE172M PE172M-50-220 PE172SF-CLEV PE172-220-PFAFF PE173-PC PE174 PE174M PE174M-ETT PE174M-50-220 PE174-220-PFAFF
HYDRAULIC PUMP
Note: Shaded areas reflect last revision(s) made to this form. © SPX Corporation
Sheet No.
1 of 7
Rev. 18
Date: 15 Apr. 2001
Parts List, Form No. 100577, Back sheet 1 of 7 Item No. 1 2 3
Part No.
No. Req’d
24733 20937 †27142 25017 10461
1 1 1 1 1
Cord Set (Elect. Version) Filler/Vent Plug Filler/Vent Plug Remote Hand Switch Ass'y (Elect. Version; See Form No. 101644) Remote Foot Switch Ass'y (For P116-10, PE172AF-CLEV, PE172-FS
209798 209805 45596 10973 304835 209794 52174 10258 213663 *304830 †250156 21846 21608 11461 10854 61169 304826 *10922 †250158 61170 14440 10199 304819 12595 10519 10136 10022 304820 45560 24549 *10445 *12223 45559 *14763 †13472 *10442 *209787 209797 21278 21278-88 19463 47492 58196WH2 58196BK2
1 1 1 1 1 1 1 4 4 1 1 1 1 1 2 1 1 1 1 1 1 4 1 1 1 1 4 1 1 2 2 4 1 1 1 2 2 2 1 1 1 1 1 1
Retaining Ring (1-3/16 Shaft) Ball Bearing Eccentric Slotted Spring Pin Drive Shaft Gerotor Drive Pin Pump Mounting Bracket Washer (3/8 bolt) Cap Screw (3/8-16 UNC X 1" Lg.; Torque to 230/250 in. lbs.) Seal Seal Filter Support Filter Clamp Ring Cap Screw (1/4-20 UNC X 1-3/4 Lg.; Torque to 60/80 in. lbs.) Lower Gerotor Housing Gerotor Set O-ring (2-1/8 X 1-15/16 X 3/32) O-ring (2-1/8 X 1-15/16 X 3/32) Upper Gerotor Housing Note: Shaded areas Swivel Elbow Fitting reflect last revision(s) Nut (Air & Electric Versions) made to this form. Hose Ass'y Brass Washer (1/2 Bolt) Set Screw (Torque to 60/80 in. lbs.) Set Screw (Air Version) Cap Screw (1/4-20 UNC X 1-1/2 Lg.; Torque to 110/130 in. lbs.) High Pressure Piston Piston Block Valve Guide Compression Spring (5/32 O.D. X 3/4 Lg.) Ball (3/16 Dia.) Check Block O-ring (7/16 X 5/16 X 1/16) O-ring (7/16 X 5/16 X 1/16) Copper Washer (3/8 X 1/4 X 1/32 Thk.) Replaceable Seat Hollow Lock Screw (7/16-20 UNF-3A; Torque to 110/130 in. lbs.) Relief Valve Ass'y Relief Valve Ass'y (For PE172A-ITR & PE172A-FINN; Set at 8,900/9,500) Tee Fitting Handle (Air & Electric Versions) Electric Motor Electric Motor (For PE172AF-CLEV, PE172AH-CLEV, PE172F-CLEV, &
58196BL20 13643 10030 209799 10177 61165 61165BK2
1 1 1 AR 10 1 1
64538OR9
1
Reservoir (For PE172M, PE172AM, PE174AM, PE172AM-50-220, PE172A-50-220 &
40063OR9
1
Reservoir (For PE17-SOLO)
Description
PE172F-CLEV, & PE172H-CLEV)
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43
PE172H-CLEV)
44 45 46
Electric Motor (For P116-10) Air Motor (For models 4045, 4047, PA172, & PA174 manufactured after July 1991) Cap Screw (5/16-18 UNC X 3/4 Lg.; Torque to 220/240 in. lbs.) Self-Tapping Screw (1/4-10 X 7/8 Lg.) Screw (1/4-20 UNC X 3/4 Lg.; For pumps with metal reservoirs.) Reservoir Reservoir (For PE172AF-CLEV, PE172AH-CLEV, PE172SF-CLEV, PE172F-CLEV, & PE172H-CLEV) PE174M-50-220)
Part numbers marked with an asterisk (*) are contained in Repair Kit No. 300430. Part numbers marked with a dagger (†) are contained in EPR Seal Kit No. 300648. AR: As Required
Continued -
Parts List
Form No. 100577 Item No. 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67
70 71 72 73 74
Part No.
No. Req’d
Description
61166BK2 61166RE2 66218BK2 *40164 *10273 †250157 *10265 †17714 12149 *16057 10427 209795 61167 *10266 †17715 211843 *16346 *10283 †250159 46063 52167 13037 15156 11221 10386 *29786 350126 304840 307137 309219 305101 305257 211929 252187 15130 200415 †17723 10245 10009 11351
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 2 2 2 2 2 2 2 1 1 1 2 2 2
Cover Plate Cover Plate (For P116-10) Cover Plate (For PE17-PARK, PE172-ABC, PE172A-BOC & PE17-SOLO) Cover Gasket O-ring (13/16 X 5/8 X 3/32) O-ring (13/16 X 5/8 X 3/32) O-ring (5/16 X 3/16 X 1/16) O-ring (5/16 X 3/16 X 1/16) Dowel Pin (1/8 Dia. X 3/4 Lg.) Compression Spring (3/16 O.D. X 1" Lg.) Pipe Plug (1/8 NPTF) Outlet Ball Stop Check Body O-ring (3/8 X 1/4 X 1/16) O-ring (3/8 X 1/4 X 1/16) Dowel Pin (3/16 Dia. X 1" Lg.; Loctite Pin in Piston Hole with Radius End Out) Compression Spring (1" O.D. X 7/8 Lg.) O-ring (2" X 1-5/8 X 3/16) O-ring (2" X 1-5/8 X 3/16) Automatic Valve Piston Automatic Valve Block Cap Screw (1/4-20 UNC X 2" Lg.; Torque to 40/50 in. lbs.) Dowel Pin (1/4 Dia. X 1/2 Lg.; Tapered End Toward Spring) Compression Spring (1/4 O.D. X 1" Lg.) Locknut (3/8-24 UNF) Adjusting Screw Trade Name Decal (For 4044, 4045, 4046, 4046-50-220 & 4047) Trade Name Decal (For 4044-50-110) Trade Name Decal (For 4046-50-110) Trade Name Decal (For PE17 Series) Trade Name Decal (For HE172) Trade Name Decal (For HE174) Trade Name Decal (For 99150-B) Trade Name Decal (For PE172-220-PFAFF & PE174-220-PFAFF) Pipe Plug (1/8 NPTF) Rubber Seal Rubber Seal Lockwasher (1/4 Bolt; Air & Electric Versions) Cap Screw (1/4-20 UNC X 3/4 Lg.; Torque to 60/80 in. lbs.; Air & Electric Versions) Washer (Electric Versions)
*200188 203972 †250328 †11278 †15061 †251229 10673 251617
1 1 1 1 1 1 1 1
PARTS INCLUDED BUT NOT SHOWN Warning Decal (Elect. versions) Decal (CSA Approval; For 4044, 4046-50-220, 4046 , PE172A-ITR & PE172A-FINN) Decal (EPR Seals) Tube Elbow Male Connector Oil Line Fitting (For PE172AF-CLEV & PE172AH-CLEV) Coupler (For PE172AF-CLEV, PE172AH-CLEV, PE172F-CLEV,
10909 251874 9796 351060 253524 16339 42576WH2 16254
1 1 1 1 1 1 1 1
Plug Fitting (3/8 NPTF; For PE172AF-CLEV, & PE172AH-CLEV) Decal (ISO; For PE172A-DAYCO) Coupler (For PE172A-EZE) Gasket (Between motor and cover plate) Serial No. Decal (PFAFF; For PE172-220-PFAFF) Foot Switch Guard (For P116-10) Control Box Cover (For PE17-SOLO) 90° Elbow Fitting (For PE172F-CLEV & PE172H-CLEV)
& PE172H-CLEV)
Part numbers marked with an asterisk (*) are contained in Repair Kit No. 300430. Part numbers marked with a dagger (†) are contained in EPR Seal Kit No. 300648. Note: Shaded areas reflect last revision(s) made to this form.
Sheet No.
2 of 7
Rev. 18
Date: 15 Apr. 2001
Parts List, Form No. 100577, Back sheet 2 of 7
AIR MOTOR VERSION (For model no.'s 4045, 4047, PA172 & PA174 manufactured before July 1991) Note: For air version pump models manufactured after July 1991, refer to the list on back sheet 1 of 7.
⑩
➅
Item No.
Part No.
No. Req'd
1 2 3 4 5 6
11573 10174 28157 28158 *33405 15668
2 2 2 1 1 1
Cap Screw (5/16-18 UNC X 1/2 Lg.) Machine Screw (1/4-20 UNC X 1/2 Lg.) Bracket Handle Air Motor Set Screw (1/4-20 UNC X 1/2 Lg.;
7
10672 12328 211629 13645 252579
1 1 1 1 1
Straight Fitting (For 4045 & 4047) Straight Fitting (For PA172 & PA174) Directional Valve (For 4045 & 4047) Directional Valve (For PA172 & PA174) Muffler
Description
Turn in Until Flush with Cover Plate)
8 10
*Note: For air motor repair kit, order no. 252170.
Refer to any operating instructions included with this product for detailed information about operation, testing, disassembly, reassembly, and preventive maintenance. Items found in this parts list have been carefully tested and selected. Therefore: Use only genuine replacement parts! Additional questions can be directed to our Technical Services Department.
Parts List
Form No. 100577
OPTIONAL VALVE ASSEMBLIES 4-Way Tandem Center Directional Valve
Item No. 1 2
Part No. 9500
No. Req'd
Description
1
4-Way Valve Ass'y
3 4 5
•*10268 †17716 •*11863 209809 10030
2 2 2 1 2
6
52165
1
Item No.
Part No.
No. Req'd
Description
(see Form No. 100623) O-ring (1/2 X 3/8 X 1/16) O-ring (1/2 X 3/8 X 1/16) Backup Washer (1/2 X 3/8 X 1/16)
7 8 9 10 11
*200395 •*10442 •*209787 •*12223 209797
1 1 1 1 1
Gasket Copper Washer (1/4 Bolt) Replaceable Seat Steel Ball (3/16 Dia.) Hollow Lock Screw (7/16-20
Coupling Cap Screw (5/16-18 UNC X 3/4 Lg.;
12
*211797
1
Compression Spring
13
•209795
1
Outlet Ball Stop
Torque to 220/240 in. lbs.)
Adapter Block Manifold
UNF-3A; Torque to 110/130 in. lbs.) (5/32 O.D. X 5/8 Lg.)
Part numbers marked with an asterisk (*) are contained in Repair Kit No. 300430. Part numbers marked with a dagger (†) are contained in EPR Seal Kit No. 300648. Part numbers marked with a bullet (•) are contained in Outlet Check Repair Kit No. 300606.
Sheet No.
3 of 7
Rev. 18
Date: 15 Apr. 2001
Parts List, Form No. 100577, Back sheet 3 of 7
OPTIONAL VALVE ASSEMBLIES 2 Position, 2-Way Manual Valve
Item No. 1 2 3 4
Part No.
No. Req'd
*304829 *11088 11089 *11024
1 1 1 1
Description Gasket Retaining Ring (9/16 Shaft) Washer (3/16 Bolt) Compression Spring (1/4 O.D. X 5/8 Lg.)
5 6
*10423 209945
1 2
Steel Ball (9/32 Dia.) Cap Screw (5/16-18 UNC X 2-1/2 Lg.; Torque to 220/240 in. lbs.)
7 8 9
52168 *10267 †13472 *15085
1 1 1 1
Valve Body O-ring (7/16 X 5/16 X 1/16) O-ring (7/16 X 5/16 X 1/16) Backup Washer (7/16 X 5/16 X 3/64 Thk.)
Item No.
Part No.
No. Req'd
Description
10 11 12
304849 213109 10556
1 1 1
Release Valve Screw Release Valve Handle Set Screw (1/4-20 UNC X 1/4 Lg.;
13
*10268 †17716 *11863 202505 209795
2 2 2 1 1
O-ring (1/2 x 3/8 X 1/16) O-ring (1/2 x 3/8 X 1/16) Backup Washer (1/2 X 3/8 X 1/16) Coupling Outlet Ball Stop (Part of the Basic
Torque to 30/50 in. lbs.)
14 15 16
Pump Ass'y)
52170
1
Complete Valve Ass'y (Consists of Items 1 thru 15)
Part numbers marked with an asterisk (*) are contained in Repair Kit No. 300430. Part numbers marked with a dagger (†) are contained in EPR Seal Kit No. 300648.
Parts List
Form No. 100577
MANIFOLD ASSEMBLY
Item No. 1
Part No.
No. Req'd
209945
2
Description Cap Screw (5/16-18 UNC X 2-1/2 Lg.;
Item No.
Part No.
No. Req'd
5
*11863
2
Backup Washer
6 7 8
202505 200609 209795
1 1 1
Coupling Drain Line Outlet Ball Stop (Part of the Basic
Torque to 220/240 in. lbs.)
2 3 4
45554 *304829 *10268 †17716
1 1 2 2
Manifold Gasket O-ring (1/2 X 3/8 X 1/16) O-ring (1/2 X 3/8 X 1/16)
Description (1/2 X 3/8 X 1/16)
Pump Ass'y)
Part numbers marked with as asterisk (*) are contained in Repair Kit No. 300430. Part numbers marked with a dagger (†) are contained in EPR Seal Kit No. 300648.
Sheet No.
4 of 7
Rev. 18
Date: 15 Apr. 2001
Parts List, Form No. 100577, Back sheet 4 of 7
HYDRAULIC SCHEMATIC FOR ELECTRIC MOTOR PUMPS
M
HP
LP
INTERNAL RELIEF VALVE 10,400 P.S.I. 9,150 P.S.I. FOR PE172A-ITR
OUTLET AUTOMATIC VALVE LOW PRESSURE RELIEF VALVE 260 P.S.I. NOTE: MEASURED AT 19463 FITTING.
HYDRAULIC SCHEMATIC FOR AIR MOTOR PUMPS
INTERNAL RELIEF VALVE 10,400 P.S.I. HP
LP
OUTLET AUTOMATIC VALVE
LOW PRESSURE RELIEF VALVE 290 P.S.I. NOTE: MEASURED AT 19463 FITTING.
Parts List
Form No. 100577
MOTOR CONTROL ASSEMBLY FOR PE172A-EZE FOR PROPER MOTOR VOLTAGE CONNECTION AND ROTATION SEE CONNECTION INFORMATION SUPPLIED WITH MOTOR. MTR POWER CORD GROUND (MUST BE ISOLATED BETWEEN NUTS AND CAN BE AT TOP OR BOTTOM OF STACK.)
MTR-2
MTR-1
17, 18 16
GRD
14
"A"
15
"A"
GRD
NOTE: SERRATED LOCK WASHER MUST BE ADJACENT TO METAL BOX. MORE WASHERS CAN BE USED IF DESIRED. VIEW
A-A
13
1
12
H1
4
X1
5
H2
T
9, 10, 11
M H3
6
X2
2
H4
2 3
7, 8
6
4
5
Sheet No.
5 of 7
Rev. 18
Date: 15 Apr. 2001
Parts List, Form No. 100577, Back sheet 5 of 7
Item No.
Part No.
No. Req’d
1 2 3 4 5
17370 10975 14667 15993 24733 12293 11203 252253 12355 10962
1 4 1 2 1 7' 1 1 2 2
6 7 8 9
Item No.
Description Screw (6-20 X 1/4 Lg.) Screw (8-32 UNC X 5/16 Lg.) Starter Electrical Relay Strain Relief Bushing Cord (8 ft.; For 115 V. pumps) Electrical Cable (For 220 V. pumps) Conduit Connector Screw (8-32 x 3/8 Lg.) Washer (For #8 bolt) Screw (8-32 UNC X 1/2 Lg.)
Part No.
10 10196 11 11388 12 42575WH2 13 305665 14 10167 15 11108 16 10197 17 11202 18 11362
No. Req’d 2 2 1 1 1 1 2 1 1
Description Nut (#8-32 UNC) Washer (#8 External Tooth) Electrical Control Box Transformer Screw (#10-24 UNC X 3/4 Lg.) Washer (#10 External Tooth) Nut (#10-24 UNC) Nipple Conduit Locknut
ELECTRICAL SCHEMATIC FOR PE172A-EZE L2
L1
L3
M1 MTR
H1
H3 H2
H4
Note: Transformer connections are as shown for 115 v., 50/60 Hz.
T 24V X1
X2
M
CUSTOMER CONNECTION
For 220 v., 50/60 Hz. units, transformer connections to be as follows: H1 to L1 H2 to H3 H4 to L2
Parts List
Form No. 100577
MOTOR CONTROL ASSEMBLY FOR PE172-ABC FOR PROPER MOTOR VOLTAGE CONNECTION AND ROTATION SEE CONNECTION INFORMATION SUPPLIED WITH MOTOR. MTR MTR-1
MTR-2
GRD-2
THIS VIEW ROTATED 180° TO SHOW WIRE CONNECTIONS.
1 25
2
PB2 (STOP) PB1 (START) -1
-2
-1
-2
3 4
23, 24 PGT-4
FU
5 M3
M4
M6 M2
M1
X2
21, 22
6 7
H
H
1
H
2
T
3
X1
H
4
20
M5
7, 14 8
PGT-2
"A" PGT-3
18, 19 NOTE: No. 29 (.136) drill in motor, if req'd. Max. drill depth to be .265 deep from outside surface of motor. Place washer (12355) between box & motor as a spacer.
PGT-1
GROUND
GRD-1
"A"
17
11
16 POWER CORD GROUND (MUST BE ISOLATED BETWEEN NUTS AND CAN BE AT TOP OR BOTTOM OF STACK.) GRD-1
9 10
15 12
13
14
NOTE: SERRATED LOCK WASHER MUST BE ADJACENT TO METAL BOX. MORE WASHERS CAN BE USED IF DESIRED.
VIEW "A-A" Sheet No.
6 of 7
Rev. 18
Date: 15 Apr. 2001
Parts List, Form No. 100577, Back sheet 6 of 7
Item No.
Part No.
1 309019 2 17782 3 43126WH2 4 14812 5 51218WH2 6 420718-4 7 11539 8 205189 9 15993 10 12908 11 210112 12 307440 13 11856
No. Req’d 1 1 1 4 1 1 4 1 1 3' 1 1 1
Description Push Button Switch Snap Plug Control Box Cover Pan Hd. Screw (8-18 x 3/8) Electrical Control Box Contactor (2 pole) Rnd. Hd. Screw (10-24 x 1/4) Ground Decal Strain Relief Bushing Cable (18/3 SJTO) Strain Relief Bushing Cord (8' Lg.; 115 V. 12/3 SJTO) Rnd. Hd. Screw (10-24 x 1)
Item No.
Part No.
No. Req’d
14 15 16
11108 10197 52203
3 2 1
Ext. Tooth Washer (.40 x .20) Hex Nut (10-24) Pressure Switch
17 18 19 20 21 22 23 24 25
215857 13532 206857 305665 250442 16887 11202 212434 250440
1 1 1 1 1 1 1 1 1
Strain Relief Bushing Pan Hd. Screw (8-32 x 1/2) Special Washer (.53 x .21) Transformer Fuse (1.25 AMP 250 V.) Fuse Holder Nipple Plain Washer (1.76 x .95) Warning Decal
Description
(See Form No. 100589)
ELECTRICAL SCHEMATIC FOR PE172-ABC L2
L1 M1 MTR
H1
H3 H2
H4
24V. X1
4
X2
FUSE 1.25A
PB2
PB1 M LS
M2
CUSTOMER CONNECTION
PS (N.O. HELD CLOSED)
GRD
Parts List
Form No. 100577
MOTOR CONTROL ASSEMBLY FOR PE17-SOLO HEX. NUT
1 (METAL SWITCH GUARD)
CONTROL BOX
FOR PROPER MOTOR VOLTAGE CONNECTION AND ROTATION SEE CONNECTION INFORMATION SUPPLIED WITH MOTOR. MTR
INTERNAL TOOTH LOCK WASHER HEX. NUT
ANTI-ROTATION KEYED WASHER
MTR-2
MTR-1
GRD-2
2 3 TGS
GRD-1
-2 -1
PGT-1
4
PGT-2
5, 6
POWER CORD GROUND (MUST BE ISOLATED BETWEEN NUTS AND CAN BE AT TOP OR BOTTOM OF STACK.)
7
NOTE: NO. 29 (.136) DRILL IN MOTOR, IF REQ’D. DRILL DEPTH TO BE .265 DEEP FROM OUTSIDE SURFACE OF MOTOR. PLACE WASHER (12355) BETWEEN BOX & MOTOR AS SPACER.
GRD
11
8 9
10
NOTE: SERRATED LOCK WASHER MUST BE ADJACENT TO METAL BOX. MORE WASHERS CAN BE USED IF DESIRED.
Sheet No.
7 of 7
Rev. 18
Date: 15 Apr. 2001
Parts List, Form No. 100577, Back sheet 7 of 7 Item No.
Part No.
1 352061 2 12301 3 11202 4 42575WH2 5 252253 6 12355 7 15993
No. Req’d 1 1 1 1 1 1 1
Description Switch Guard Toggle Switch Nipple Electrical Control Box Pan Hd. Screw (8-32 x 3/8) Plain Washer (.44 x .19) Strain Relief Bushing
Item No.
Part No.
No. Req’d
8 9 10 11
24733 10167 11108 10197
1 1 1 2
Description Cord (8' Lg.; 115 V. 16/3 SJTO) Rnd. Hd. Screw (10-24 x 3/4) Ext. Tooth Washer (.40 x .20) Hex Nut (10-24)
ELECTRICAL SCHEMATIC FOR PE17-SOLO GRD
L2
L1
OFF TGS
ON
MTR
ELECTRICAL SCHEMATIC FOR PUMPS WITH REMOTE CONTROLS L2 L1 L3
GRD
M REMOTE
ELECTRICAL SCHEMATIC FOR PE172A-BOC L1
L2
M
L3
GRD
