Transcript
Parts List
PL 006-177 March 2015
13H d/p Cell Transmitter ®
Styles D and E
Model Code Description Transmitter, 316 ss body Span Limits 5 and 60 kPa (20 and 250 inH2O, 50 and 620 mbar) ΔP 50 and 210 kPa (200 and 850 inH2O, 0.5 and 2.1 mbar) ΔP Body Material 316 ss body (13HA only) Process Connectors Tapped for 1/4 NPT Tapped for 1/2 NPT Tapped for R1/4 Tapped for R1/2 Machined for 9/16-18 Aminco fitting None, Body tapped for 1/4 NPT Optional Suffix Zero Elevation Kit Zero Suppression Kit
Give instrument Model Code when ordering. *Parts preceded by an asterisk are recommended spare parts. See Recommended Spare Parts Summary section for quantities. TO ORDER PARTS, CALL 1-866-746-6477.
Model 13HA –M –H S 1 2 3 4 5 0 –L –R
PL 006-177 Page 2
PARTS
Parts Figure 1. Force Balance Unit (Items 1-32)
Part B0158ER
20 to 100 kPa, 3 to 15 psi, 0.2 to 1.0 bar or kg/cm2 output
Part B0158ES
3 to 27 psi output
Part B0158ES
20 to 100 kPa, 3 to 15 psi, or 0.2 to 1.0 bar or kg/cm2 output, used with cells having low differential measurement spans (2.5 to 5 kPa, 10 to 19.9 inH2O or 25 to 50 mbar with medium range capsule and 12.5 to 50 kPa, 50 to 199 inH2O or 125 to 500 mbar with high range capsule).
Part B0158ER
20 to 100 kPa, 3 to 15 psi, or 0.2 to 1.0 bar or kg/cm2 output, used on oxygen or chlorine service in cells containing Fluorolube filled capsule. (Note that unit also requires a Dashpot Kit N0138GA, not listed.)
PL 006-177 Page 3
PARTS
Table 1. Parts for Figure 1 Item
Part No.
1
U0102LN
2
0048219
3
Below
Qty.
4 2 1
U0119TA U0102FY
5
0017611
6
U0102FZ
7 8
*9 10
U0102NA Below
For B0158ES
1 1 1 1 1
D0123MZ U0102KP
13
U0102LP
14
N0999MH
15
X0104EB
16
N0999FM
17
X0100ML
18
X0166MX
19
N0999ML
20
N0143XN
21
Below
Pin Bellows Assembly
N0143SB
23
U0102MX
24
U0102LE
25
N0142NY
26
U0102TE
27
0023442
28
N0999QA
29
U0102KR
30
N0999MG U0102KC N0999MP
29
U0102KR
30
N0999MC U0102KC U0119TB D0123MZ
Plate Screw, Socket H., 0.138-32 x 0.187 Flexure Plate Flapper Nut, 0.190-32 Flexure Assembly Screw, Socket H., 0.164-32 x 0.250 Washer Base O-ring, 15.6 mm (0.61 in) ID Force Bar Assembly 316 ss (standard)
B0158EU
*9
Spring
O-ring, 4.5 mm (0.18 in) ID
1 4 2 1 1 1 1 2 2 1 1 1
B0158EP
31
Nut, 0.190-32
For B0158ES
X0153ZC
*32
Screw
For B0158ER
U0102KL
28
Bracket Assembly
U0119TG
11
31
Lockwasher
U0119TC
12
22
Screw, Hex H., 0.250-28 x 0.500
For B0158ER
U0119TF 4
Part Name
Tantalum Seal
1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1
Washer, 316 ss Dished Washer, cobalt alloy Nut, 0.250-28, 316 ss Spacer Bracket Assembly Screw F.H., 0.099-48 x 0.187 Vernier Range Bar Assembly (for B0158ER) Spring Holder Spring Spring Holder Vernier Range Bar Assembly (for B0158ES) Spring Holder Spring Spring Holder Nozzle Assembly O-ring, 4.5 mm (0.18 in) ID
PL 006-177 Page 4
PARTS Table 1. Parts for Figure 1 (Continued) Item
Part No.
35
D0124QJ
*36
D0124QP
*37
D0123MZ
*38
A037744
39
U0102MF
40
X0100AA
*41
C0136HZ
*42
C0100EM
*43
U0103FP
44
X0116CS
45
0006535
46
X0172NK
*47
C0130EF
*48
D0123MZ
*49
A037744
50
B1277PM
51
D0129GH
52
B1271CY
53
U0119AZ
54
D0124JG
55
A037744
56
D0124QD
57
D0124QC
58
X0133VM
–
Below
Qty.
1 1 1 1 1 1 1 1 2 2 2 3 1 1 1 1 4 1 1 1 1 1 1 2 1
Part Name OTHER PARTS Relay Mounting Assembly, 1/4 NPT (gray) Orifice Screw Assembly O-ring, 4.5 mm (0.18 in) ID O-ring, 2.9 mm (0.11 in) ID Clamp Screw, F.H., 0.138-32 x 0.218 Relay Replacement Kit Gasket Screen Screw, Pan H., 0.190-32 x 1.000 Screw, F.H., 0.190-32 x 0.750 Screw, Socket H., 0.250-28 x 0.875 Screw Assembly (prior to January 1974) O-ring, 4.5 mm (0.18 in) ID O-ring, 2.9 mm (0.11 in) ID Cover Assembly, Plastic Screw (used with plastic cover) Gasket Safety Plug Restrictor (used from Jan. 1974 to Sept. 1977) O-ring (used from Jan. 1974 to Sept. 1977) Split Collar (threaded) Split Collar (clearance) Screw, Socket H., 0.138-32 x 0.375 Scale
N0148RH
200 to 850 inH2O
U6002WW
50 to 210 kPa
U6002XC
500 to 2100 mbar
N0148RG
20 to 250 inH2O
U6002WX
5 to 62 kPa
U6002XB
50 to 620 mbar
B0123HX
50 to 425 inH2O
U6002XD
12 to 105 kPa
U6002XE
12 to 500 mbar
PL 006-177 Page 5
PARTS Figure 2. 13H d/p Cell Transmitter
Table 2. Parts for Figure 2 Item
Part No.
1
B0138MJ
2
D0161QT
3
Below
Qty.
2 2 8
X0104ET D0117SF
5
D0161LU
6
–
7
–
8
U0102ML
9
0030597
10
D0129JA
*11
Below
1 2,4 1 1 1 2 1 1
8
X0116AR D0117SK
14
D0114FL
*15
Below D0120AC U0102XL
16
–
Cover, (316 ss) 1/4 NPT Process Connections Plug, 316 ss Capsule Assembly (see Table 3) Flexure Assembly, 316 ss (see Table 3) Gasket Screw, F.H., 0.190-32 x 0.375 Plate O-ring Glass filled ptfe (190°C, 375°F) (cleaned for oxygen and chlorine service) Screw, Hex H., 0.500-20 x 4.750 (see Note) Cadmium plated steel (standard)
X0118AT 13
Nut, 0.500-20 (see Note)
Buna N (standard)
U0102XK Below
Vent Plug, 316 ss
17-4 PH stainless steel
U0102TB
12
Vent Screw, 316 ss
Cadmium plated steel (standard)
X0118AW 4
Part Name
17-4 PH stainless steel
1 2 – 2 1 2
Body, (316 ss) 1/4 NPT Process Connection Screen, 316 ss Gasket Glass filled ptfe (standard) Pair of gaskets, glass filled ptfe (cleaned for oxygen and chlorine service) Connector (see Table 4)
PL 006-177 Page 6
PARTS Table 2. Parts for Figure 2 (Continued) Item 17
Part No. Below
Qty.
4
X0100MN X0118AX *18
Below D0120AB D0114TP U0102XM
19
X0100BX
20
N0143TZ
21
N0143TY
Part Name Screw, Hex H., 0.437-20 x 1.500 Cadmium plated steel (standard)
2 – 2 2 1 1 0-2 0-2
17-4 PH stainless steel Gasket (see Note) Glass filled ptfe ptfe Pair of gaskets, glass filled ptfe (cleaned for oxygen and chlorine service) Screw, F.H, 0.138-32 x 0.375 Plug (for Aminco connections) Connector (for Aminco connections)
NOTE When replacing capsule gaskets, body bolts and nuts must be replaced. Body bolts and nuts are for high pressure service. Replace them only with Foxboro part numbers listed.
Table 3. Capsule and Flexure Assemblies
Ranges and Fills Ranges: 0-5 to 0-62 kPa, 0-20 to 0-250 inH2O, or 0-50 to 0-620 mbar 316 ss Capsules and Flexures: Silicone filled (standard) Fluorolube filled (oxygen service) Silicone filled (gold plated), includes gold plated flexure assembly High viscosity fill Nickel Alloy (a)Capsule and Flexure, Fluorolube filled (chlorine service) Ranges: 0-50 to 0-210 kPa, 0-200 to 0-850 inH2O or 0-500 to 0-2100 mbar 316 ss Capsules and Flexures: Silicone filled (standard) Fluorolube filled (oxygen service) High viscosity fill Silicon filled (gold plated) Nickel Alloy (a) Capsule and Flexure, Fluorolube filled (chlorine service)
Capsule Assembly Item 6
Flexure Assembly Item 7
N0148XZ N0148RZ N0148RQ N0150ZD N0151WZ
D0114XZ D0114XZ
N0999MR A0129CE N0150ZC N0148RR N0150YG
a. Equivalent to Hastelloy® C. Hastelloy is a registered trademark of Haynes International, Inc.
Table 4. Connectors Connector Type 1/2 NPT, 316 ss 1/2 NPT, Cadmium plated steel 1/4 NPT, 316 ss 1/4 NPT, Cadmium plated steel R 1/2, 316 ss R 1/2, Cadmium plated steel R 1/4, 316 ss R 1/42, Cadmium plated steel
Item 16 N0141XN N0141XM N0141XT N0141XF B0139BG B0139BE B0139BD B0139BB
D0114XZ D0120KK
Flexure not Removable
PL 006-177 Page 7
PARTS Figure 3. Zero Elevation Kit
1
2
3
4
5
6
4
Table 5. Parts for Figure 3 Item
Part No.
–
U0122BS
1
X0116PB
2
N0138GB
3
U0124EZ
4
X0100ZB
5
U0122BB
6
N0138BS
Qty.
Part Name Zero Elevated Range
– 1 1 2 4 1 2
Screw, Socket H., 0.125-40 x 0.187 Bracket Screw, Socket H., 0.138-32 x 0.312 Screw, Pan H., 0.125-40 x 0.156 Spring Assembly Plate
NOTE Also used with 15 to 30 psi (reverse) output.
Figure 4. Zero Suppression Kit
1
2
3 2 4 2 5
PL 006-177 Page 8
PARTS
Table 6. Parts for Figure 4 Item
Part No.
–
U0122BA
1
U0122BB
2
X0116PB
3
A0100YC
4
U0102RW
5
N0138BS
Qty.
Part Name Zero Suppression Kit
– 1 5 2 1 2
Spring Assembly Screw, Socket H., 0.125-40 x 0.187 Screw, Socket H., 0.138-32 x 0.250 Bracket Plate
Figure 5. Zero Elevation Kit (Optional use with Fluorolube Filled Capsules)
1
3
4
5
7
10 7
9
8 11
Table 7. Parts for Figure 5 Item
Part No.
–
N0138GG
1
U0122BB
3
U0124EZ
4
N0138GB
5
X0116PB
7
X0100ZB
8
U0114BM
9
U0122BX
10
U0122BY
11
N0138BS
Qty.
– 1 2 1 1 3 1 1 1 2
Part Name Zero Elevation Kit Spring Assembly Screw, Socket H., 0.138-32 x 0.312 Bracket Screw, Socket H., 0.125-40 x 0.250 Screw, Pan H., 0.125-40 x 0.156 Bracket Stop Screw, Socket H., 0.125-40 x 0.500 Plate
PL 006-177 Page 9
PARTS Figure 6. Zero Suppression Kit (Optional use with Fluorolube Filled Capsules)
2
3
1
Table 8. Parts for Figure 6 Item
Part No.
–
U0122BN
1
U0122BB
2
X0116ET
3
X0116PB
Qty.
– 1 2 1
Part Name Zero Suppression Kit Spring Assembly Screw, Socket H., 0.125-40 x 0.250 Screw, Socket H., 0.125-40 x 0.187
PL 006-177 Page 10
PARTS Figure 7. Integral Air Filter Set Using Fixed Pressure Regulator
Table 9. Parts for Figure 7 Item –
Part No. Below
Qty.
1
B0114BW 0014802
2
X0172BE
3
Below
With polyolefin tube
1 1 1
Compression Connector Elbow Tube
B0114BX
Copper
B0127YG
Polyolefin coated
–
X0168FF
2
4
B0123HD
5
X0100AG
1 2
6
N0141ZT
7
0011962
8
N0141ZW
9
Below
Screw, Hex H., 0.250-20 x 0.500
Nut, 0.312-18 Mounting Bracket Screw, Hex H., 0.437-20 x 0.625 Plated steel (standard)
P0120RN D0114SM
Shrinkable Tube (used at each end of polyolefin coated tube) Regulator, Fixed
MOUNTING SET Mounting Set
– 2 1 4
X0100NW 10
Air Filter Set With copper tube
B0127YY 1
Part Name
316 ss
1
U-bolt
PL 006-177 Page 11
PARTS Figure 8. Integral Air Filter Set Using Adjustable Pressure Regulator
Table 10. Parts for Figure 8 Item –
Part No. Below
Qty.
1
B0114BF X0172BE
2
0011962
3
0025962
4
Below
With polyolefin tube
1 2 2 1
B0114ZT B0127YH
2
5
B0114BE
6
B0123HE
7
X0100KW
8
B0110TN
9
0014116
1 1 2 1 1 2 2
0012354 X0100AG
12
12
Below
Nut, 0.312-18 Lockwasher Tube Polyolefin coated
X0168FF
11
Elbow
Copper
–
10
Air Filter Set (Items 1-11) With copper tube
B0127ZF 1
Part Name
Shrinkable Tube (used at each end of polyolefin coated tube) Bracket Filter Regulator Screw, Hex H., 0.312-18 x 3.750 Tee Elbow Nut, 0.250-20 Screw, Hex H., 0.250-20 x 0.500
Supply Pressure Gauges (used with above filter sets) Pressure Gauge 1
P0103YM
0 to 30 psi/o to 2 bar
P0121BL
0 to 200 kPa/0 to 2 kg/cm2
P0122JD
1
Pressure Gauge (green band)
PL 006-177 Page 12
RECOMMENDED PARTS SUMMARY
Table 11. Ermeto Connectors Size
316 ss
Carbon Steel
Brass
1/4 NPT x 6 mm 1/2 NPT x 12 mm
U7002AS U7002AP
U7002AT U7002AR
U7002AU –
Table 12. Output Signal Test Tee Part No.
Qty.
D6002BK D6002BL Q0101NE 0040508 96000BL
2 1 1 1 1
Name Nipple Valve Plug Tee Assembly Drawing
Recommended Parts Summary Figure Number
Item Number
Number of Parts Recommended for Part Number
Part Name
The following parts are used in the Instrument Transmission System: Figure 1 9 D0123MZ O-ring, 4.5 mm (0.18 in) ID 20 N0143XN O-ring, 15.6 mm (0.61 in) ID 32 U0119TB Nozzle Assembly 36 D0124QP Orifice Screw Assembly 37 D0123MZ O-ring, 4.5 mm (0.18 in) ID 38 A037744 O-ring, 2.9 mm (0.11 in) ID 41 C0136HZ Relay Replacement Kit 42 C0100EM Gasket 43 U0103FP Screen 47 C0130EF Screw Assembly (prior to Jan. 1974) 48 D0123MZ O-ring, 4.5 mm (0.18 in) ID 49 A037744 O-ring, 2.9 mm (0.11 in) ID The following parts are located in the Instrument Measuring System: Figure 2 1 B0138MJ Vent Screw 2 D0161QT Vent Plug 3 Below Nut, 0.500-20 X0104ET Cadmium plated steel X0118AW 17-4 PH stainless steel 6 Below Capsule Assembly, 0-21 to 0-250 inH2O, 316 ss Capsules and Flexures N0148XZ Silicone filled (standard) N0148RZ Fluorolube filled (for oxygen service) N0148RQ Silicone filled (gold plated) N0150ZD High viscosity filled N0151WZ Nickel Alloy (a) capsule and flexure fluorolube filled (chlorine service)
1 Inst. 5 Inst. 20 Inst. 3 0 0 1 1 1 1 1 2 1 1 1
6 0 1 2 2 2 1 2 4 1 2 2
9 1 3 3 3 3 2 4 8 2 3 3
0 0 8
1 1 16
3 3 48
0
0
1
PL 006-177 Page 13
RECOMMENDED PARTS SUMMARY
Recommended Parts Summary (Continued) Figure Number
Item Number
Figure 2 (Cont.)
6
Number of Parts Recommended for Part Number
Part Name
Capsule Assembly, 0-200 to 0-850 inH2O, 316 ss Capsules and Flexures N0999MR Silicone filled A0129CE Fluorolube filled (for oxygen service) N0150ZC High viscosity filled N0148RR Silicone filled (gold plated) N0150YG Nickel Alloy (a) fluorolube filled (chlorine service) 8 U0102ML Gasket 11 Below O-ring U0102TB Buna-N U0102XK Glass filled ptfe (cleaned for oxygen or chlorine service) 12 Below Screw, Hex H., 0.500-20 x 54.750 X0116AR Cadmium plated steel X0118AT 17-4 PH stainless steel 14 D0114FL Screen, 316 ss 15 Below Gasket D0120AC Glass filled ptfe U0102XL Pair of glass filled ptfe (cleaned for oxygen service) 18 Below Gasket D0120AB Glass filled ptfe U0102XM Pair of glass filled ptfe (cleaned for oxygen or chlorine service) D0114TP ptfe The following regulators are used in the Air Filter Sets: Figure 8 6 B0123HE Filter Regulator, Adjustable 12 Below Gauge P0103YM 0 to 30 psi/o to 2 bar P0121BL 0 to 200 kPa/0 to 2 kg/cm2 P0122JD Green band Figure 7 4 B0123HD Regulator, Fixed a. Equivalent to Hastelloy C.
Below
1 Inst. 5 Inst. 20 Inst. 0
0
1
0 0
1 1
2 2
8
16
48
2 2
4 4
12 12
2
4
6
0 0
0 1
1 2
0
0
1
PL 006-177 Page 14
Invensys Systems, Inc. 10900 Equity Drive Houston, TX 77041 United States of America http://www.invensys.com Global Customer Support Inside U.S.: 1-866-746-6477 Outside U.S.: 1-508-549-2424 Website: http://support.ips.invensys.com
Copyright 1971-2015 Invensys Systems, Inc. All rights reserved. Invensys, Foxboro, and d/p Cell are trademarks of Invensys Limited, its subsidiaries, and affiliates. All other trademarks are the property of their respective owners. Invensys is now part of Schneider Electric. 0315
