Transcript
Includes Flat panel display arm, keyboard drawer, visor, glass & trim ring
The natural way to look at a computer™
Flat Panel Display Arm
Retrofit Kit
Assembly Instructions Model #
FPA-0-2121 -24, -27, -28, -30, -33, -34 The arm ships with two VESA plates. Determine the one you need by holding VESA plates up to the attachment holes on the back of the monitor. Select the one where all four holes line up with the VESA plate holes.
Figure 1B - Hole pattern for keyboard drawer 21/2"
(64 mm) 3/16"
Dia. Deep 6 Places 5/8"
Step 1.
4" (102 mm)
Cut opening for viewport. (Figure 1A). Prepare surface for keyboard drawer (Figure 1B).
FRONT EDGE
A
1-1/4" (Offset 32mm)
Step 2.
(Typ.)
KB drawer size 24" 27" 28" 30" 33" 34"
Using the desk bracket (B) as a template, locate and drill bracket holes (Figure 1A). Note drill size and hole depth!
Figure 1A
1.26" (32 mm) 1.26"(32 mm)
6 Places
Center on viewport opening
21-1/4" (540 mm)
1/2"(12.7 mm) R. All corners
FRONT EDGE 21-1/4" (540 mm)
PACKING LIST QTY
3/16" Dia. 5/8" Deep
27-1/4" (692 mm)
2219/32"(574 mm) 255/16"(643 mm) 261/8"(664 mm) 281/16"(713 mm) 311/4"(794 mm) 321/8"(816 mm)
DESK BRACKET
UNDERSIDE OF TOP CLEARANCE 27-1/4"(692 mm) Minimum Clearance Depth Of Worksurface
1/4"
Dimension A
3" (76 mm)
REF #
ITEM #
1 A1 1 A2 FPA-8-2006 1 B 924B-2520-0-50A 1 C 10 D 1412APPBO 4 E 50900219 1 F 20060126 1 G 20060127 1 H Varies 1 J AC-SG10712121 2 L 50900032 4 M 6N50TXPZ 4 N 50900034 4 O 50900037 1 P 5081062 2 Q FR2121/Clip 4 S 10628-03819 *VESA 75/100 Standard
DESCRIPTION
75 mm *VESA plate 100 mm *VESA plate Desk bracket Wing nut Screw, #14 x 3/4" Screw, Silver, 4mm x 0.7 x 10 Keyboard hanger w/ glide - left Keyboard hanger w/ glide - right Keyboard drawer Viewport glass Screw - #14 x 1-1/2" Security screw #6 x 5/8" Trim ring corner Trim ring straight - C Visor Locking tab Screw, Black, 4mm x 0.7 x 8
P.O. Box 725 • 421 W. Industrial Avenue • Effingham, Illinois 62401 • Phone: (800) 730-6682 • Fax: (800) 940-6682 •
[email protected] • www.novadesk.com Page 1 Patents pending. IIR013 FPA-0-2121 Asy. Instr. - 11/2011 © Nova Solutions, Inc. 2011
Step 3.
Step 5.
Align holes in desk mounting bracket (B) with holes in worksurface (Figure 2). Attach using screws (D). WARNING: Removing the set screws or oiling the joints could cause the flat panel display to fall and void the warranty.
Figure 2 ge of
ed Back
ut
cut-o
Figure 5
Attach keyboard hangers (F,G, Figure 5) to underside of worksurface with screws (D, E). Insert outward locking tab (Q) by pulling it forward to lock in place.
G
D
F L
IMPORTANT: The longer screws (L) pass through the tubular section of the keyboard hanger. That allows the assembly to be leveled by loosening or tightening the screws.
A2
B A1 D C
L D
Q
S
Step 4. Attach flat panel display to VESA plate
Step 6. Install trim ring & viewport glass
Remove flat panel display base. Attach flat panel display to VESA plate with screws (E, Figure 3). Depress silver spring pin on VESA plate extension tube and slide it into the desk mount extension tube. Tighten wing nut (C, Figure 4). See "Monitor Angle" for adjustment guidance. When installing some Apple® flat panel displays, a VESA Adapter (Model #50-8-4100) may be necessary. Contact Customer Support for more information.
Snap trim ring pieces (N, O) together. Insert into viewport cutout and attach with screws (M). Carefully insert viewport glass into trim ring. Slide keyboard tray into glides.
N O
Figure 3 A1
A2
Monitor Angle 270°
75 mm (2-15/16")
E
100 mm (3-15/16")
Desk Bracket Adjustment
75 mm plate
75 mm (2-15/16") 3-3/4"
100 mm (3-15/16")
Display
320°
4-7/16"
VESA Plate Adjustment
Figure 4
1. Locate screen as high as possible without raising glass.
viewport cut-out
2. Aim screen slightly above user’s eyes. (Bottom of screen should be closer to eyes than top of screen.)
C
Extension tubes IIR013 FPA-0-2121 Asy. Instr. - 11/2011, © Nova Solutions, Inc. 2011
3. Preferred location is with top edge of flat panel display at back edge of glass. 4. For semi-recessed positions, remove viewport glass and raise flat panel display. Page 2
