Transcript
Product Specifications FPA5150-23PM-1 23 dBi Flat Panel Array Antenna, singlepolarized, 5.25–5.875 GHz, type N female flange, UV protected plastic offwhite radome, no flash, standard pack—flat panel (for pipe mounting)
CHARACTERISTICS
General Specifications Antenna Input
N Female
Packing
Standard pack
Radome Color
Offwhite
Radome Material
UV Protected Plastic
Reflector Construction
Flat panel reflector
Antenna Type
Flat Panel Array, unpressurized
Diameter, nominal
0.3 m | 1 ft
Flash Included
No
Polarization
Single
Electrical Specifications Beamwidth, Horizontal
10.5 °
Beamwidth, Vertical
10.5 °
Electrical Compliance
ETSI 302 085 V1.1.1 (200006) Class TS 1, 2, 3, 4, 5
FronttoBack Ratio
35 dB
Gain, Mid Band
23.0 dBi
Operating Frequency Band 5.250 – 5.875 GHz Return Loss
14.0 dB
VSWR
1.50
Mechanical Specifications Net Weight
1 kg | 2 lb
©2011 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information.
page 1 of 2 1/28/2011
Product Specifications FPA5150-23PM-1
Packed Dimensions Height
304.8 mm | 12.0 in
Length
304.8 mm | 12.0 in
Width
15.2 mm | 0.6 in
Regulatory Compliance/Certifications Agency ISO 9001:2008
Classification Designed, manufactured and/or distributed under this quality management system
* F o o t n o t e s FronttoBack Ratio
Denotes highest radiation relative to the main beam, at 180° ±40°, across the band. Production antennas do not exceed rated values by more than 2 dB unless stated otherwise.
Gain, Mid Band
For a given frequency band, gain is primarily a function of antenna size. The gain of Andrew antennas is determined by either gain by comparison or by computer integration of the measured antenna patterns.
Operating Frequency Band Bands correspond with CCIR recommendations or common allocations used throughout the world. Other ranges can be accommodated on special order. Packing
Andrew standard packing is suitable for export. Antennas are shipped as standard in totally recyclable cardboard or wirebound crates (dependent on product). For your convenience, Andrew offers heavy duty export packing options.
Return Loss
The figure that indicates the proportion of radio waves incident upon the antenna that are rejected as a ratio of those that are accepted.
VSWR
Maximum; is the guaranteed Peak VoltageStandingWaveRatio within the operating band.
©2011 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information.
page 2 of 2 1/28/2011
