Fr801g Thru Fr807g Fast Recovery Rectifiers Glass Passivation Junction Ordering Information

Transcript

FR801G thru FR807G Fast Recovery Rectifiers Glass Passivation Junction 1.0 (25.4) MIN. .052 (1.3) DIA. .048 (1.2) Ordering Information .360 (9.1) .340 (8.6) .360 (9.1) ( ) DIA. .340 (8.6) 1.0 (25.4) MIN. Part Number Remark FR80xG General FR80xG-H Halogen Free FR80xG-Q Automotive PRIMARY CHARACTERISTICS R-6 R6 IF 8A VRRM 50~1000V IFSM 125A VF 1.3 V TJ max 150°C Dimensions in inches and (millimeters) Features Mechanical Date ‧Ideal for surface mount applications ‧Cases: R-6 ‧Easy pick and place ‧Case Material: Molded Plastic. Plastic UL Flammability ‧Built-in strain relief Classification Rating 94V-0 ‧Fast switching speed ‧Terminals: Lead free Plating (Tin Finish) Solderable per MIL-STD-202, Method 208 ‧AEC-Q101 qualified ‧Polarity: Cathode Band ‧Weight: 2.047 grams (approximate) MAXIMUM RATINGS (TA=25°C (TA 25°C unless l otherwise th i noted) t d) PARAMETER Maximum repetitive peak reverse voltage SYMBOL FR801G FR802G FR803G FR804G FR805G FR806G FR807G UNIT VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V IF 8.0 A IFSM 125 0 125.0 A Maximum Instantaneous Forward Voltage IF=8A @ 25°C VF 1.3 V Maximum DC Reverse Current @ Tc=25°C at Rated DC Blocking Voltage @ Tc=100°C IR 10 100 uA Maximum Reverse Recovery Time(NOTE2) trr yp Junction Capacitance(NOTE1) p ( ) Typical Cj Maximum average forward rectified current Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load Typical Thermal Resistance Operating Temperature Range Storage Temperature Range 150 250 500 ns 100 pF RθJA 70 °C/W TJ -55 to +150 °C TSTG -55 to +150 °C NOTES:1.Measured at 1.0MHZ and applied reverse voltage of 4.0V DC 2.Measured with IF=0.5A,IR=1A,IRR=0.25A Revision: B01 www.eris.com.tw FR801G thru FR807G Fast Recovery Rectifiers Glass Passivation Junction FIG 1-TYPICAL FIG. 1 TYPICAL FORWARD CURRENT DERATING CURVE FIG 2-TYPICAL FIG. 2 TYPICAL FORWARD CHARACTERISTICS 100.00 8 6 4 2 0 0 25 50 75 100 125 150 INSTANTANEOUS FORW WARD CURRENT (A) AVERAGE FORWA ARD CURRENT,(A) 10 10.00 1.00 0.10 TJ=25℃ PULSE WIDTH 300us 2% DUTY CYCLE 0.01 0.4 0.6 0.8 AMBIENT TEMPERATURE(℃) 1.4 FIG. 4-TYPICAL REVERSE CHARACTERISTICS 100 125 TJ=25℃ 8.3ms Single H lf Si Half Sine Wave JEDEC 100 25℃ R REVERSE LEAKAGE CURREN NT (UA) PE EAK FORWARD SURGE CURR RENT (A) 1.2 FORWARD VOLTAGE (V) FIG. 3-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 75 50 25 100℃ 10 1 0.1 0.01 0 1 10 20 100 40 NUMBER OF CYCLES AT 60Hz 60 80 100 PERCENTAGE RATED PEAK REVERSE VOLTAGE (%) FIG. 5-TYPICAL JUNCTION CAPACITANCE FIG. 6-Reverse Recovery Time Characteristic and Test Circuit 50W NONINDUCTIVE 200 JUNCT TION CAPACITANCE (pF) 1.0 trr 10W NONINDUCTIVE ( ) (+) 25Vdc (approx.) 150 D.U.T. PULSE GENERATOR (NOTE 2) ( ) 1W NONINDUCTIVE 100 OSCILLISCOPE (NOTE 1) NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. | | | | | | | | 0 5A +0.5A 0 -0.25A (+) -1.0A 1cm SET TIME BASE FOR 50 / 10ns 10 / cm 50 0 0 1 10 100 REVERSE VOLTAGE (V) Revision: B01 www.eris.com.tw