Frame Grabber Selection Guide

Transcript

Frame Grabber Selection Guide Signal Type Model Name Standard Configuration Connector Interface Resolution Interface Bus Digital HDV62/HDV62A/PXIe-HDV62A HDMI Full HD GIE62+/GIE64+ Power over Ethernet Gigabit Ethernet FIW64 / FIW62 IEEE 1394b IEEE 1394b depends on camera specification DVI-I RJ45 x2 / RJ45 x4 1920 x 1080p depends on camera specification MDR26 depends on camera specification PCIe x 4 PCIe x 4 PCIe x 4 Max. Video Input 1 2/4 PCIe x 4 / PCIe x 1 4/2 Max. Frame Rate 60 depends on camera specification depends on camera specification depends on camera specification √ (HDV62) √ (GIE62+) √ (FIW64) √ Area Scan Camera √ √ √ - √ Line Scan Camera Monochrome Camera √ √ √ Color Camera Interlaced Scan √ √ √ √ √ √ √ √ √ √ √ √ √ Progressive Scan Camera Tap – – - 1-tap, 2-tap, 3-tap, 4-tap 8-bit, 10-bit depends on camera depends on camera specification (FIW64) 8 to 10-bit (FIW62) 8-bit, 10-bit TTL I/O Pixel Depth specification Max. Clock Frequency On-board memory Page No. Model Name Standard Configuration 2 √ √ 85 MHz - - 512 MB - - 128 MB 1-3 / 1-4 1-5 / 1-6 1-7 1-8 Signal Type Digital Grablink Base Grablink DualBase PoCL (Power over Camera Link) base PoCL (Power over Camera Link) dual base Grablink Full Camera Link base, medium, full HDR26 x 1 HDR26 x 2 HDR26 x 2 depends on camera specification depends on camera specification depends on camera specification PCIe x1 PCIe x 4 PCIe x 4 1 2 1 depends on camera specification depends on camera specification depends on camera specification TTL I/O √ √ √ Area Scan Camera √ √ √ √ √ √ Connector Interface Resolution Interface Bus Max. Video Input Max. Frame Rate Line Scan Camera Monochrome Camera Color Camera Interlaced Scan Progressive Scan Camera Tap Pixel Depth Max. Clock Frequency On-board memory Page No. 1-1 CPL64 PoCL (Power over Camera Link) base, medium √ √ √ √ (Bayer, RGB) √ (Bayer, RGB) √ (Bayer, RGB) √ √ √ 3-tap 8-bit, 10-bit or 12-bit 85 MHz 6-tap 8-bit, 10-bit or 12-bit 85 MHz 8-bit, 10-bit, 12-bit 85 MHz 64 MB 128 MB 128 MB 1-9 1-10 1-11 10-tap www.adlinktech.com C121-1-CH1.indd 1 2012/3/6 上午 11:05:04 Signal Type Analog 1 cRTV24 / cRTV44 Picolo Series Picolo Alert Color: PAL/NTSC Monochrome: CCIR/EIA (RS-170) - Color: PAL/NTSC Monochrome: CCIR/EIA (RS-170) - Color: PAL/NTSC Monochrome: CCIR/EIA (RS-170) - Color: PAL/NTSC Monochrome: CCIR/EIA (RS-170) - BNC x 4 BNC x 4 BNC x 4 640 x 480 (NTSC/RS170), 768 x 576 (PAL/CCIR) 640 x 480 (NTSC/RS170), 768 x 576 (PAL/CCIR) Picolo: BNC, DB9, S-video Picolo Pro2: BNC x 4 640 x 480 (NTSC/RS170), 768 x 576 (PAL/CCIR) PCIe-RTV24: PCIe x1 PCI-RTV24: PCI cRTV24: 3U cPCI cRTV44: 6U cPCI 4 to 16* 120 fps TTL I/O √ Area Scan Camera Configuration Connector Interface Resolution Interface Bus 640 x 480 (NTSC/RS170), 768 x 576 (PAL/CCIR) Alert PCI: 64-bit, 66 MHz PCI bus Alert PCIe: PCI Express x 1 4 32-bit, 33 MHz PCI bus PCIe x1 Picolo: 1 to 3 Picolo Pro2: 4 120 fps 30 fps 120 fps √ √ √ √ √ √ √ Line Scan Camera - - - - Monochrome Camera √ √ √ √ Color Camera √ √ √ √ Interlaced Scan √ - √ - √ - √ - Camera Tap 1-tap (PCIe-RTV24) 1-tap (cRTV44) Pixel Depth 8-bit 8-bit 8-bit 8-bit Max. Clock Frequency - - - - On-board memory - - - - 1-12 1-13 1-14 1-15 Max. Video Input Max. Frame Rate Progressive Scan 3 Vision Platforms Page No. 4 to 16 * RTV-E4 four channels extension board (optional) Signal Type 2 Cameras PCIe-RTV24 / PCI-RTV24 Frame Grabbers Model Name Standard Analog 4 Picolo U4/8/16 H.264 Domino Melody Domino Harmony Domino Symphony PCIe Color: PAL/NTSC Monochrome: CCIR/EIA (RS-170) - Color: PAL/NTSC Monochrome: CCIR/EIA (RS-170) - CCIR/RS170, Non-standard CCIR/RS170, Non-standard CCIR/RS170, Non-standard - - - HD44 640 x 480 (NTSC/RS170), 768 x 576 (PAL/CCIR) HD44 640 x 480 (NTSC/RS170), 768 x 576 (PAL/CCIR) HD15 x 1 depends on camera specification HD15 x 2 depends on camera specification HD44 x 1 depends on camera specification Max. Video Input PCI Express x 1 4 to 16 PCI Express x 1 Picolo U4 H.264: 4 Picolo U8 H.264: 8 Picolo U16 H.264: 16 32-bit, 33 MHz PCI bus 1 64-bit, 66 MHz PCI bus 2 PCI Express x 1 4 Max. Frame Rate 480 fps 480 fps depends on camera depends on camera depends on camera specification specification specification Configuration Connector Interface Resolution Interface Bus √ √ √ √ √ Area Scan Camera √ (H.264) √ (H.264) √ √ √ Line Scan Camera - - - - - Monochrome Camera √ √ √ Color Camera √ √ √ - Interlaced Scan √ √ √ √ √ (RGB) - - √ √ √ √ Progressive Scan Camera Tap - - - - - Pixel Depth 8-bit 8-bit 10-bit 10-bit 10-bit Max. Clock Frequency - - 40 MHz 40 MHz 65 MHz On-board memory - - 16 MB 32 MB 64 MB 1-16 1-17 1-18 1-19 1-20 TTL I/O Page No. Image Analysis Tools Picolo V16 H.264 Model Name Standard √ www.adlinktech.com 1-2 C121-1-CH1.indd 2 2012/3/6 上午 11:05:19 HDMI HDV62 1-CH PCI Express® HDMI Video Capture Card Introduction The HDV62 is a PCI Express frame grabber offering uncompressed image acquisition and video streaming in full 1080p HD. The ADLINK HDV62 provides 1920x1080p resolution, progressive scan, and noise reduction for greater image quality. Equipped with a field programmable gate array (FPGA) and 512 MB memory buffer, the HDV62 offers the ability to stream uncompressed image to the host PC, in addition to color space conversion in real-time via on-board hardware in order to offload repetitive tasks from the host CPU. Based on the PCI Express x4 form factor, the HDV62 is specifically designed for medical imaging, scientific imaging, and military application system integrators by providing uncompressed video streaming up to 1920x1080p at 60 fps and lossless pixel information for both spatial and frequency domain analysis. Grayscale Camera Color Camera Digital Analog Features ■ Uncompressed 1920 x 1080p, 60 fps video streams ■ Supports both digital, and component analog video inputs ■ PCI Express® x4 interface ■ Hardware color space conversion ■ 512 MB of DDR2 SDRAM frame buffer ■ Configurable EDID ■ 4 TTL digital inputs/outputs and 1 trigger output ■ Direct SDK support Applications ■ Medical imaging ■ Scientific imaging ■ HDMI video testing ■ Multimedia device testing Specifications ■ Form Factor PCI Express® x4 compliant ■ Video Input Digital: DVI 1.0, HDMI 1.3 (non-HDCP and non-Audio) ■ Video Input Format ■ Windows® Platform • Windows® Vista/XP/7 • Microsoft® DirectX ■ ViewCreatorProTM • ViewCreatorPro assists developers in evaluating initial tests and functions. 1080i @ 25 fps, 1080i @ 30 fps 1080p @ 25 fps, 1080p @ 30 fps, 1080p @ 50 fps, 1080p @ 60 fps ■ HDV62 1-CH PCI Express® HDMI video capture card 1-3 SD: 720 x 576 @ 25 fps PAL ■ Pixel Output Format 720 x 486 @ 30 fps NTSC RGB : 32-bit RGB 30-bit RGB 24-bit RGB YUV : 24-bit 4:4:4 YCbCr 16-bit 4:2:2 YCbCr Monochrome: 8-bit Y ■ Frame Buffer DDR2, 512 MB ■ Digital Input/Output 4 TTL input, 4 TTL output (input with interrupt) ■ Connector DVI-I: DVI-D and RGB with sync input DSUB9 Female: YPbPr ■ Temperature: 0 to 55°C Operating Environment Ordering Information HD: 720p @ 50 fps, 720p @ 60 fps Software Support Analog: RGB, YPbPr ■ Storage Environment Humidity: 5% to 90% RHNC Temperature: 0 to 70°C Humidity: 0 to 95% RHNC ■ Power Requirements +12 V max @ 0.5 A, +3.3 V max @ 2 A ■ Dimensions 174.62 mm x 111.15 mm (W x L) www.adlinktech.com C121-1-CH1.indd 3 2012/3/6 上午 11:05:20 HDMI HDV62A/PXIe-HDV62A 1-CH PCI Express®/PXI Express® HDMI Video & Audio Capture Cards 1 The HDV62A/PXIe-HDV62A full high-definition video/audio capture cards are based on the PCI Express® x4 interface, enabling acquisition of video and digital audio streams from both HD (high-definition) and SD (standard-definition) video up to 170 MHz DVI input. ADLINK's HDV62A/PXIe-HDV62A delivers superior quality high-definition video for medical and scientific imaging and HDMI video/audio test applications. Equipped with a FPGA (field programmable gate array) and a 512 MB memory buffer, the HDV62A/PXIe-HDV62A provides image streaming of specified target areas to the host PC, as well as real-time hardware color space conversion to offload repetitive tasks from the host CPU. HDV62A Grayscale Camera Color Camera Digital 2 Cameras PXIe-HDV62A Frame Grabbers Introduction External Bracket (Optional, HDV62A only) ◆ D-SUB9 female for CVBS and S-Video ◆ BNC x3 for YPbPr Analog Features 3 Specifications ■ Form Factor HDV62A: PCI Express® x4 compliant PXIe-HDV62A: PXI Express® specification Rev. 1.0 compliant ■ Video Input Digital: DVI 1.0, HDMI 1.3 ■ Video Input Format HD: 720p@50 fps, 720p@60 fps Analog: RGB, YPbPr, CVBS, S-video 1080i@25 fps, 1080i@30 fps 4 1080p@25 fps, 1080p@30 fps 1080p@50 fps, 1080p@60 fps Medical imaging Scientific imaging ■ HDMI video/audio testing ■ Multimedia device testing SD: Image Analysis Tools Applications 720 x 576@25 fps PAL 720 x 486@30 fps NTSC ■ ■ ■ Pixel Output Format RGB: 32-bit RGB , 30-bit RGB, 24-bit RGB YUV : 24-bit 4:4:4 YCbCr 16-bit 4:2:2 YCbCr Software Support ■ Windows® Platform • Windows® Vista/XP/7 • Microsoft® DirectX ■ ViewCreatorProTM ViewCreatorPro assists developers in evaluating initial tests and functions. Ordering Information ■ HDV62A 1-CH HDMI PCI Express® audio/video capture card ■ PXIe-HDV62A 1-CH HDMI PXI Express® audio/video capture card Vision Platforms ■ Uncompressed 1920 x 1080p, 60 fps video stream ■ Support for CVBS, S-video, RGB and component video input ■ Support for HDMI and DVI video input ■ Support for HDMI, S/PDIF audio input ■ PCI Express® x4 interface ■ PXI Express® specification Rev. 1.0 compliant (PXIe-HDV62A only) ■ Hardware color space conversion ■ 512 MB of DDR2 SDRAM frame buffer ■ Configurable EDID ■ Direct SDK support Monochrome: 8-bit Y ■ Audio Input ■ Frame Buffer ■ Connectors S/PDIF, HDMI DDR2, 512 MB DVI: DVI-D, HDMI & RGB with sync input External D-SUB9 Female: CVBS, S-Video (HDV62A only) External BNC: YPbPr (HDV62A only) Toslink & RCA: S/PDIF ■ Operating Environment Temperature: 0 to 55°C Humidity: 5% to 90% RHNC ■ Storage Environment Temperature: 0 to 70°C Humidity: 0 to 95% RHNC ■ Power Requirements ■ Dimensions (not including connectors) +12 V max @ 0.5 A, +3.3 V max @ 2 A PCIe version: 174.62 x 111.15 mm (W x L) PXIe version: 174.62 x 111.15 mm (W x L) ■ Slot Requirement 2 peripheral slots (PXIe-HDV62A) www.adlinktech.com 1-4 C121-1-CH1.indd 4 2012/3/6 上午 11:05:22 Gigabit Ethernet Vision GIE64+ 4-CH PCI Express® Power over Ethernet Frame Grabber Introduction ADLINK's GIE64+ is a PCI Express® x4 lane, PoE (Power Over Ethernet) frame grabber which supports four independent Gigabit Ethernet ports for multiple GigE Vision device connections with data transfer rates up to 1000 Mb/s, as found with most GigE Vision cameras. The GIE64+ features not only PoE (power over Ethernet), combining power and signal supply into a single cable, but also IEEE 1588 (precise time protocol), enabling synchronization with multicamera acquisition. Applications will greatly benefit through reduce cost, simpler installation and lower maintenance. PoE Technology The PoE (Power over Ethernet) technology in the GIE64+ provides automatic detection for stable and reliable connection between PoE or non-PoE cameras and frame grabbers. Grayscale Camera Color Camera Digital IEEE 1588 Features ■ PCI Express® x4 compliant ■ Support for four independent Gigabit Ethernet ports ■ Support for IEEE 1588, PTP technology ■ Support for IEEE 802.3af for PoE (Power over Ethernet) ■ Support for jumbo frames (9 KByte) ■ Support for link aggregation ■ Powered Device (PD) auto detection and classification Applications ■ Machine vision inspection systems Scientific research instrumentations ■ Medical research instrumentations ■ Intelligent transportation systems ■ Benefits of PoE • Simplified installation • Lowered maintenance • Reduced total cost of ownership Specifications ■ Form Factor ■ Ethernet Port ■ Operating Environment ■ Power Requirements * ■ Isolated Voltage (optional) ■ Dimensions PCI Express® x4 Four fully-integrated Gigabit Ethernet Media Access Control (MAC) and physical layer (PHY) ports. Power over Ethernet, IEEE 802.3af compliant, supporting 0, 1, 2, 3, and 4, and providing up to 15.4 watts 9 kB jumbo frame support Temperature: 0˚C to +55˚C Humidity: 5% to 90% RHNC +3.3 V max @ 1.5 A 2250 VDC 168 mm x 111.15 mm (W x L) * Additional +12 V max @ 6 A for PoE camera Software Support ■ Windows® Platform • Available for Windows® XP/7 Ordering Information ■ GIE64+ 4-CH PCI Express® power over Ethernet frame grabber 1-5 www.adlinktech.com C121-1-CH1.indd 5 2012/3/6 上午 11:05:23 Gigabit Ethernet Vision GIE62+ 2-CH PCI Express® Power over Ethernet Frame Grabber 1 ADLINK's GIE62+ is a PCI Express® x4 lane, PoE (Power over Ethernet) frame grabber which supports two independent Gigabit Ethernet ports for multiple GigE Vision device connections with data transfer rates up to 1000 Mb/s, as found with most GigE Vision cameras. The GIE62+ features a single cable solution through the combination of power and data lines, simplifying installation, lowering maintenancing, and reducing total cost of ownership. PoE Technology Benefits of PoE Grayscale Camera Color Camera Digital Features Applications ■ ■ Form Factor ■ Ethernet Port ■ Isolated Voltage ■ Operating Environment ■ Power Requirements * ■ Dimensions PCI Express® x4 Two fully-integrated Gigabit Ethernet Media Access Control (MAC) and physical layer (PHY) ports. Power over Ethernet, IEEE 802.3af Compliant, support class 0, 1, 2, 3, and 4, and provides up to 15.4 watts 9 kB jumbo frame support 1000 V @ 60 seconds Temperature: 0˚C to +55˚C Humidity: 5% to 90% RHNC +12 V max @ 0.2 A, +3.3 V max @ 1.5 A 129.5 mm x 111.15 mm (W x L) 4 Image Analysis Tools Machine vision inspection systems Scientific research instrumentations ■ Medical research instrumentations ■ Intelligent transportation systems ■ 3 Specifications Vision Platforms ■ PCI Express® x4 compliant ■ Supports two independent Gigabit Ethernet ports ■ Supports PoE (Power over Ethernet), IEEE 802.3af compliant ■ Supports jumbo frames (9 KByte) ■ Supports Link aggregation ■ Powered Device (PD) auto detection and classification ■ Provides industrial screw lock connector ■ 2 digital input/output and 2 trigger output (GIE62+ only) • Simplified installation • Lowered maintenance • Reduced total cost of ownership 2 Cameras The PoE (Power over Ethernet) technology in the GIE62+ provides automatic detection for stable, and reliable connection between PoE or non-PoE cameras and frame grabbers. Frame Grabbers Introduction * Additional +12 V max @ 3 A for PoE camera Software Support ■ Windows® Platform • Available for Windows® XP/Vista/7 Ordering Information ■ GIE62+ 2-CH PCI Express® power over Ethernet frame grabber with digital I/O and trigger I/O ■ PoE 2-CH PCI Express® power over Ethernet frame grabber without digital I/O and trigger I/O www.adlinktech.com 1-6 C121-1-CH1.indd 6 2012/3/6 上午 11:05:24 IEEE 1394 FIW64 / FIW62 4-CH / 2-CH PCI Express® IEEE 1394b Frame Grabbers Introduction The FIW64 / FIW62 are IEEE 1394b (FireWire 800) interface cards designed for high speed computer-based machine vision applications. The FIW64 / FIW62 support up to four 1394b (FireWire 800) ports for multiple 1394b device connections with data transfer rates up to 3.2 Gb/s, as found with most IEEE 1394b cameras. The FIW64 / FIW62 provide four/two direct-connect IEEE 1394b connectors with a screw-lock mechanism. These screw-lock connectors provide a reliable connection between FIW64 / FIW62 and up to four IEEE 1394b cameras. FIW62 FIW64 PCI EXPRESS Grayscale Camera ® RGB Camera Digital Features ■ Industrial screw lock connector ■ Channel status LEDs ■ Power supplied to the IEEE 1394b connectors A 4-pin ATX power connector on the FIW64 / FIW62 support IEEE 1394b cameras that draw power directly from the frame grabbers. Each port has a green LED on the front panel that will illuminate when the FIW64 / FIW62 are connected to a IEEE 1394b camera for convenient identification of channel connection status. The FIW64 provides four isolated digital inputs and outputs to connect to external devices such a position sensor. The FIW64 also includes four isolated programmable trigger output pulses to manage trigger events such as activating a strobe light. Specifications FIW64 FIW62 ■ Form Factor ■ IEEE 1394b Port PCI Express® x4 compliant PCI Express® x1 compliant Fully support provisions of IEEE P1394b-2002 Fully compliant with provisions of IEEE std 1394-1995 for a high performance serial bus and IEEE std 1394a- 2000 ■ Operating Environment Temperature: 0˚C to +55˚C Humidity: 5% to 90% FIW62 ■ PCI Express® x1 compliant ■ High-speed image transfer rates up to 800 Mb/s ■ Storage Environment Temperature: -20˚C to +85˚C Humidity: 0 to 95% RHNC ■ Power Requirements Four isolated digital inputs/outputs Four isolated trigger inputs/outputs Applications ■ Digital and Trigger I/Os +3.3 V max @ 0.22 A +12 V max @ 0.2 A Power provided to IEEE 1394 connection +3.3 V max @ 2.5 A +12 V / per port, 1 A (over current protection) ■ Isolated Voltage 1000 V @ 60 seconds ■ Dimensions 129.5 mm x 111.15 mm (W x L) FIW64 ■ PCI Express® x4 compliant ■ High-speed image transfer rates up to 3.2 Gbps ■ Four isolated digital inputs/outputs ■ Four isolated TTL level programmable trigger output pulses ■ Machine vision inspection systems Automatic optical inspection machineries ■ Scientific research instrumentations ■ Medical research instrumentations ■ Software Support - 78.6 mm x 111.15 mm (W x L) ■ Windows® Platform • Available for Windows® XP/Vista/7 Ordering Information ■ FIW64 4-CH PCI Express® x4 IEEE 1394b interface card ■ FIW62 2-CH PCI Express® x1 IEEE 1394b interface card Accessories For more information on cables, please refer to page 2-15 Cabling ■ 1394b Cable 4.5 M IEEE 1394b 9-pin cable with screw-lock connector 1-7 www.adlinktech.com C121-1-CH1.indd 7 2012/3/6 上午 11:05:25 Camera Link CPL64 2-CH PCI Express® PoCL Frame Grabber 1 CPL64 is a PoCL (Power over Camera Link®) frame grabber that is based on the PCI Express® x4 interface, and supports two-channel Camera Link “base” configurations, multi-tap area and line scan cameras. The CPL64 frame grabber strikes a perfect balance between performance and cost. It is capable of simultaneously image acquisition from two completely independent Camera Link base configuration Frame Grabbers Overview cameras, and supports image transfer rates up to 512 MB/s. PoCL Technology Benefits of PoCL CAMERA Grayscale Camera RGB Camera Camera Link Digital • Easy installation • Reduce wiring (Single cable for digital I/F, and power) • Reduce camera size Features Applications ■ Software Support ■ Windows® Platform • Available for Windows® XP/Vista/7 (32/64-bit) ■ CamCreatorTM • CamCreator assists developers in quickly evaluating initial tests and functions. Ordering Information ■ CPL64 2-CH PCI Express® x4 PoCL frame grabber Accessories ■ Form Factor ■ Video Input ■ Camera Control ■ External Signal Input ■ Power over Camera Link® (PoCL) PCI Express® x4 compliant Camera Link® LVDS deferential signals Dual Base Configuration: Using two MDR26 pins connectors Maximum camera link data rate: 85 MHz Supports PoCL and standard Camera Link interface and auto detect LVDS camera control: CC1 to CC4 control signal in two MDR26 pins connectors External RS422 level ABZ phase deferential signal for encoder input 2 channels TTL level Line /Area trigger input 2 channels TTL level Line trigger start input 2 channels TTL level exposure output Line trigger bypass output (encoder mode only) 4 channels digital input; 4 channels digital output Power line output per channel : DC +12 V max @ 1 A Over-current Protection function, auto detect when non-PoCL cable or PoCL camera connected. ■ Temperature: 0˚C to +50˚C Humidity: 5% to 90% RHNC Temperature: 0˚C to +70˚C Humidity: 0 to 95% RHNC +12 V max @ 0.5 A +3.3 V max @ 1.6 A 167.65 mm x 111.15 mm (W x L) Operating Environment ■ Storage Environment ■ Power Requirements ■ Dimensions 4 Image Analysis Tools PCB/FPD/Wafer/Solar Cell surface inspections ■ Medical research instrumentations 3 Specifications Vision Platforms ■ PCI Express® x4 compliant ■ Supports 2-CH Camera Link® Base configuration ■ Acquisition pixel clock rates up to 85 MHz ■ PoCL (Power over Camera Link®) safe power compliant with auto detection ■ 128 MB of 200 MHz DDR SDRAM for acquisition ■ 4 TTL Digital Input/Output, and 2 trigger Input ■ Supports 64-bit memory addressing ■ Two serial communication ports 2 Cameras The PoCL (Power over Camera Link®) standard allows the camera link cable to supply power to the camera through the Camera Link connector without losing backward compatibility with the previous Camera Link® standard, this solution is particularly suitable for a small camera. For more information on cables, please refer to page 2-15 Cabling ■ PoCL Cable 5 M, power over Camera Link cable ■ Camera Link Cable 5 M, robot type www.adlinktech.com 1-8 C121-1-CH1.indd 8 2012/3/6 上午 11:05:28 Grablink Base Cost-effective Single Channel PoCL Frame Grabber Introduction The Grablink Base is a cost-effective full-featured frame grabber for one Camera Link® camera applications. It supports one Camera Link® Base configuration camera as well as featuring on-board processing and one rich set of I/O lines. The Grablink Base features a 1-lane PCI Express® bus. Flexible and Reliable Area-scan Acquisition Modes ◆ Trigger When the part is in front of the camera, a trigger is generated and sent to the Grablink to start the acquisition. This external signal is generated by any type of external hardware device, such as a sensor, which is connected to one of the input lines of the Grablink boards. A "software" trigger signal may also be generated by the host application. • Trigger delay: In order to accommodate different positions of the sensor, an optional programmable trigger delay may postpone the start of the acquisition for a given number microseconds. CAMERA Grayscale Camera RGB Camera Camera Link Digital Features ■ Base Camera Link® configuration cameras ■ On-board processing - LUTs operators, Bayer CFA decoder, pixel formatting, and image reconstruction ■ 64 MB on-board memory ■ PCI Express x1 ■ MultiCam drivers for Microsoft Windows® and Linux (32- and 64-bit) Applications ■ ■ ■ ■ ■ ■ Quality control Semiconductor inspection PCB inspection FPD inspection On-the-fly image acquisition High frame rate image acquisition Software Support • Available for Windows® 7 SP1/Vista SP2 (32-bit/64-bit) • Available for Windows® XP SP2 (64-bit)/SP3 (32-bit) • Available for Windows® server 2008 SP2 (32-bit/64-bit) • Available for Windows® server 2008 R2 SP1 (64-bit) • Available for Red Hat Enterprise Linux 5.2 (Kernel 2.6.18-92) (32-bit/64-bit) • Trigger decimation: In order to decrease the acquisition speed, the Grablink may be instructed to skip, at a regular defined rate, some of the pulses sent by the external trigger. High-Performance Line-scan Acquisition Modes (Please refer to page 1-10 for details.) ◆ • Continuous web scanning • Successive object scanning The Grablink acquisition boards feature several acquisition modes dedicated to line-scan cameras: ◆ Trigger: • Grablink supports start and end trigger • Trigger delay Quadrature Motion Encoder Supports Quadrature motion encoders use two signals (or phases), called A and B, that the Grablink board can interpret to know in which direction (forward or backward) the part is moving. ◆ With the optional direction selector, the user can define which direction is considered as the forward direction for the application, A to B or B to A. Optionally, the Grablink can be instructed to acquire lines only when the object is moving forward, or only when the object is moving backward. ◆ With the backward motion cancellation, the Grablink is capable of stopping the acquisition when a backward motion is detected. The line acquisition automatically resumes when the motion is again in the forward direction at the exact place where the acquisition was interrupted. Ordering Information ■ Grablink Base Cost-effective single-channel PoCL frame grabber Accessories For more information on cables, please refer to page 2-15 Cabling Quadrature Decoder Block Diagram ■ PoCL Cable 5 M, Power over Camera Link cable ■ Camera Link Cable 5 M, robot type 1-9 www.adlinktech.com C121-1-CH1.indd 9 2012/3/6 上午 11:05:29 Camera Link Grablink DualBase 2-CH PCI Express® PoCL Frame Grabber 1 The Grablink DualBase is a cost-effective full-featured frame grabber for two Camera Link cameras applications. It supports two Camera Link Base-configuration cameras as well as featuring on-board processing and two rich sets of I/O lines. Frame Grabbers Introduction Flexible and Reliable Area-scan Acquisition Modes • Trigger delay: In order to accommodate different positions of the sensor, an optional programmable trigger delay may postpone the start of the acquisition for a given number microseconds. CAMERA Grayscale Camera RGB Camera Camera Link Digital Features Applications ■ ■ ■ ■ ■ Software Support • Available for Windows® 7 SP1/Vista SP2 (32-bit/64-bit) • Available for Windows® XP SP2 (64-bit)/SP3 (32-bit) • Available for Windows® server 2008 SP2 (32-bit/64-bit) • Available for Windows® server 2008 R2 SP1 (64-bit) • Available for Red Hat Enterprise Linux 5.2 (Kernel 2.6.18-92) (32-bit/64-bit) High-Performance Line-scan Acquisition Modes ◆ The Grablink acquisition boards feature several acquisition modes dedicated to line-scan cameras: • Continuous web scanning to inspect infinite, continuously moving surfaces without losing a single line. • Successive object scanning to acquire the image of objects moving in front of the camera. The acquisition starts when each object enters the camera field of view, as signaled by an external trigger. ◆ Trigger Typically, a trigger is used to start the acquisition of lines when the part to be inspected is in position. This external signal is generated by any type of external hardware device, such as a sensor, which is connected to one of the input lines of the Grablink boards. A "software" trigger signal may also be generated by the host application. • Grablink supports start and end triggers. After it is started, the acquisition either √ Continues indefinitely (for web inspection applications) √ Continues for a programmable number of lines (to acquire the image of objects with a known length) √ Continues until an end trigger is received (to acquire the image of objects with a variable length) • Trigger delay: In order to accommodate different positions of the sensor, an optional programmable trigger delay is able to delay the start of the acquisition of a given number of lines. Quadrature Motion Encoder Supports (Please refer to page 1-9 for details.) Quadrature motion encoders use two signals (or phases) that the Grablink series can interpret to know in which direction (forward or backward) the part is moving. • Optional direction selector • Backward motion cancellation 3 4 Image Analysis Tools ■ Quality control Semiconductor inspection PCB inspection FPD inspection On-the-fly image acquisition High frame rate image acquisition • Trigger decimation: In order to decrease the acquisition speed, the Grablink may be instructed to skip, at a regular defined rate, some of the pulses sent by the external trigger. Vision Platforms ■ Two Base Camera Link® configuration cameras ■ On-board processing - LUTs operators, Bayer CFA decoder, pixel formatting, and image reconstruction ■ 128 MB on-board memory ■ PCI Express® x4 full-height, half-length 2 Cameras ◆ Trigger When the part is in front of the camera, a trigger is generated and sent to the Grablink to start the acquisition. This external signal is generated by any type of external hardware device, such as a sensor, which is connected to one of the input lines of the Grablink boards. A "software" trigger signal may also be generated by the host application. Ordering Information ■ Grablink DualBase 2-CH PCI Express® PoCL frame grabber Accessories For more information on cables, please refer to page 2-15 Cabling ■ PoCL Cable 5 M, Power over Camera Link cable ■ Camera Link Cable 5 M, robot type www.adlinktech.com 1-10 C121-1-CH1.indd 10 2012/3/6 上午 11:05:31 Camera Link Grablink Full Cost-effective Single-Channel Full Camera Link® Frame Grabber Introduction The Grablink Full is a cost-effective, full-featured frame grabber for single Camera Link camera applications. It supports one Base-, Medium- or Full-configuration camera, including 10-tap cameras. The Grablink Full features a 4-lane PCI Express bus. This high-end acquisition board is ideal for high-speed and high-resolution area-scan and line-scan applications such as printing, web, and flat panel display inspection, 3D inspection and manufacturing inspection for fast production lines. Flexible and Reliable Area-scan Acquisition Modes (Please refer to page 1-9 for details.) ◆ PCI EXPRESS Grayscale Camera High-Performance Line-scan Acquisition Modes CAMERA ® RGB Camera Camera Link Digital Features ■ Supports Base, Medium, and Full Camera Link® configuration cameras ■ 10-tap configuration cameras ■ On-board processing - LUTs operators, Bayer CFA decoder, pixel formatting, and image reconstruction ■ 128 MB on-board memory ■ PCI Express® x4 full-height, half-length ■ MultiCam drivers for Microsoft Windows® and Linux (32- and 64-bit) Applications ■ ■ ■ ■ ■ ■ Trigger • Trigger delay • Trigger decimation Quality control Semiconductor inspection PCB inspections FPD inspections On-the-fly image acquisition High frame rate image acquisition (Please refer to page 1-10 for details.) ◆ • Continuous web scanning • Successive object scanning The Grablink acquisition boards feature several acquisition modes dedicated to line-scan cameras: ◆ Trigger: • Grablink supports start and end trigger • Trigger delay Quadrature Motion Encoder Supports Quadrature motion encoders use two signals (or phases), called A and B, that the Grablink board can interpret to know which direction (forward or backward) the part is moving. ◆ With the optional direction selector, the user can define which direction is considered as the forward direction for the application, A to B or B to A. Optionally, the Grablink can be instructed to acquire lines only when the object is moving forward, or only when the object is moving backward. ◆ With the backward motion cancellation, the Grablink is capable of stopping the acquisition when a backward motion is detected. The line acquisition automatically resumes when the motion is again in the forward direction at the exact place where the acquisition was interrupted. Software Support ■ Windows® Platforms • Available for Windows® 7 SP1/Vista SP2 (32-bit/64-bit) • Available for Windows® XP SP2 (64-bit)/SP3 (32-bit) • Available for Windows® server 2008 SP2 (32-bit/64-bit) • Available for Windows® server 2008 R2 SP1 (64-bit) • Available for Red Hat Enterprise Linux 5.2 (Kernel 2.6.18-92) (32-bit/64-bit) Ordering Information Quadrature Decoder Block Diagram ■ Grablink Full Cost-effective single-channel full Camera Link® frame grabber Accessories For more information on cables, please refer to page 2-15 Cabling ■ Camera Link Cable 5 M, robot type 1-11 www.adlinktech.com C121-1-CH1.indd 11 2012/3/6 上午 11:05:32 Analog PCIe-RTV24 / PCI-RTV24 4-CH PCI Express® / PCI Real-time Video Capture Cards for Standard Cameras 1 General The PCIe-RTV24/PCI-RTV24 acquisition board are designed without compromise for machine vision and video surveillance applications. They are the ideal devices for PC-based multiple-channel vision application. ® PCIe-RTV24 The PCIe-RTV24 PCI Express x1 lane frame grabber can capture simultaneously four analog video streams in real time. It accepts standard composite colors (PAL, NTSC) or monochrome video formats (CCIR, EIA). PCI-RTV24 EXPRESS Color Camera ® Analog Features Applications ■ ■ ■ ■ ■ ■ PC-based surveillance systems Digital Video Recorder (DVR) Factory monitoring systems Machine vision inspection systems Scientific research instrumentations Medical research instrumentations ■ Windows® Platform • Available for Windows® XP/Vista/7 • Available for Microsoft® DirectX • Recommended programming environments: C#/.NET/ VC++/VB/C++ Builder/Delphi • Sample programs included ■ LabVIEW® VIs Angelo-LVIEW ■ Linux Platform Fedora core 3, Kernel 2.6.22 ■ ViewCreatorPro™ ViewCreatorPro assists developers in evaluating initial tests and functions. Ordering Information Image Acquisition ◆ Frame Rate: 30 full-frame images acquired per second for each channel. ◆ Color Image: Color video format is compatible with the following composite video input formats: NTSC-M, NTSC-Japan, PCL-B, PALD, PAL-G, PAL-H, PAL-I, PAM-M, PAL-N and SECAM ◆ Monochrome Image: The monochrome video acquisition is compatible with CCIR and EIA (RS-170). ◆ Optional Scaling: The acquire images or portions of images can be optionally scaled: • Acquisition of a programmable area of interest • Scaling of the image (down to 1:16) • Adjustment of hue (for NTSC signals), contrast (0 to 200%), brightness and saturation (0 to 200% for U and V signals) • Automatic chrominance gain control RTV-E4 Extension Board (Optional) ◆ Expandable up to 16 channels ◆ 10-pin ribbon cable to onboard 10-pin header connector for channel extension. Each header adds 4 video input channels. ◆ Three 10-pin header connectors onboard. I/O Lines The PCIe-RTV24/PCI-RTV24 is fitted with TTL compatible I/O lines, supporting 4 inputs, 4 outputs and 4 soft trigger lines with protection against overloads and electrostatic discharges. Every line maybe configured as an input or output or can be used to trigger an acquisition or report an alarm condition. RTV-I4 Isolated GPIO Board (Optional) ◆ General Purpose I/O Lines : • All I/Os are TTL compatible and support 4 inputs, 4 outputs, and 4 soft trigger lines. • Two on-board 10-pin header connectors. • The I/O lines are pulled high internally and have the following characteristics: Voltage Min. Max. Input High Voltage (20 μA) 2.0 V 5.25 V Input Low Voltage (-0.2 μA) 0.0 V 0.80 V Output High Voltage (-1.0 mA) 5.0 V -- Output Low Voltage (100 mA) -- 0.50 V 3 4 Image Analysis Tools Software Support System integrators also benefit from a watchdog for fault-tolerant applications and easy-to-use standard connectors. Vision Platforms ■ PCI Express® x1 compliant (PCIe-RTV24) , up to 120 fps ■ Four color video digitizers operating in parallel ■ Color (PAL / NTSC), monochrome (CCIR / EIA) camera supported ■ Up to 16 channels extension ■ On-board TTL I/O lines ■ Built-in watchdog timer ■ User-friendly ViewCreator utility ■ Software trigger supported Arbitrary cropping to regions of interest is possible. The PCIe-RTV24 generates bitmaps in all popular color formats such as RGB, YUV, planar, or packed. 2 Cameras PCI Grayscale Camera The supported resolution is programmable and includes square-pixel (640 x 480 or 768 x 576) and broadcast resolution. Before captured images are transferred to the PC's memory, images can be scaled down using available selectable ratios. Frame Grabbers Introduction Watchdog A hardware watchdog is available on the PCIe-RTV24/PCI-RTV24. The watchdog is able to monitor the PC's application operation and will automatically reset the PC after a programmable inactivity time-out. This ensures a reliable operation of remote systems. ■ PCIe-RTV24 PCI Express® 4-CH real-time video capture card for standard cameras ■ PCI-RTV24 PCI 4-CH real-time video capture card for standard cameras www.adlinktech.com 1-12 C121-1-CH1.indd 12 2012/3/6 上午 11:05:35 cRTV-24 / cRTV-44 3U/6U CompactPCI 4-CH Real-time Video Capture Boards Introduction General The cRTV series is a CompactPCI acquisition board is designed without compromise for security and video surveillance applications. It's the ideal device for PC based multiple-channel digital video recording. This 64-bit, 66 MHz CompactPCI (including 32-bit and 33 MHz) frame grabber can capture simultaneously four analog video streams in real time. It accepts standard composite colors (PAL, NTSC) or monochrome video formats (CCIR, EIA). cRTV-24 cRTV-44 Grayscale Camera Color Camera Analog The supported resolution is programmable and includes square-pixel (640 x 480 or 768 x 576) and broadcast resolution. Before captured images are transferred to the PC's memory, images can be scaled down using available selectable ratios. Arbitrary cropping to regions of interest are possible. The RTV series generates bitmaps in all popular color formats such as RGB, YUV, planar or packed. System integrators also benefit from a watchdog for fault-tolerant applications and easy-to-use standard connectors. Image Acquisition Features ■ Four color video digitizers operating in parallel ■ Up to 120 fps in 64-bit, 66 MHz CompactPCI bus ■ Color PAL/NTSC, monochrome CCIR/EIA camera support ■ On-board TTL I/O lines ■ User-friendly ViewCreator utility ■ Channel status report LEDs Applications ■ ■ ■ ■ ■ ■ PC-based surveillance systems Digital Video Recorder (DVR) Factory monitoring systems Machine vision inspection systems Scientific research instrumentation Medical research instrumentation Frame Rate: 30 full-frame images acquired per second for each channel. Color Image: Color video format is compatible with the following composite video input formats: NTSC-M, NTSC-Japan, PCL-B, PALD, PAL-G, PAL-H, PAL-I, PAM-M, PAL-N and SECAM ◆ Monochrome Image: The monochrome video acquisition is compatible with CCIR and EIA (RS-170). ◆ Optional Scaling: The acquired images or portions of images can be optionally scaled: • Acquisition of a programmable area of interest • Scaling of the image (down to 1:16) • Adjustment of hue (for NTSC signals), contrast (0 to 200%), brightness and saturation (0 to 200% for U and V signals) • Automatic chrominance gain control ◆ ◆ Channel Status LED The cRTV series provide channel status is monitored by four dedicated LEDs. I/O Lines (cRTV-44) The cRTV-44 is fitted with TTL compatible I/O Lines, supporting 4 inputs, 4 outputs lines with protection against overloads and electrostatic discharges. Software Support ■ Windows® Platform • Available for Windows® XP/Vista/7 • Available for Microsoft® DirectX® • Recommended programming environments: C#/.NET/ VC++/VB/C++ Builder/Delphi • Sample programs included ■ LabVIEW® VIs Angelo-LVIEW ■ Linux Platform Fedora core 3, Kernel 2.6.22 ■ ViewCreatorPro™ ViewCreatorPro assists developers in quickly evaluating initial tests and functions. Ordering Information ■ cRTV-44 6U CompactPCI 4-CH real-time video capture board ■ cRTV-24 3U CompactPCI 4-CH real-time video capture board 1-13 www.adlinktech.com C121-1-CH1.indd 13 2012/3/6 上午 11:05:36 Analog Picolo Series Color/Monochrome Frame Grabbers for Standard Cameras 1 General ◆ Picolo/Picolo PCIe: The Picolo/Picolo PCIe are low-cost frame grabber cards ideal for single camera applications. They provide a robust BNC connector, an S-video connector and a DB-9 connector for video input and I/O connections. ◆ Picolo Pro 2/Picolo Pro 2 PCIe: The Picolo Pro 2/Picolo Pro 2 PCIe are cost-effective frame grabber cards optimized for video surveillance applications. The synchronization stage, PCI management hardware and the MultiCam driver have been optimized to allow high-speed acquisition of full-resolution images from multiple unsynchronized cameras.The Picolo Pro 2/Picolo Pro 2 PCIe provide 4 BNC connectors (video input) allowing connection of up to four cameras. Picolo Grayscale Camera Color Camera Analog Features Picolo Pro 2/Picolo Pro 2 PCIe ■ Connection of up to 4 cameras ■ High frame rate ■ 13 TTL I/O lines Physical Information ■ Picolo Pro 2/Picolo Pro 2 PCIe PCI/PCIe board, 121 x 85 mm Power consumption: 1.7 W (+5 V max @ 240 mA, +12 V @ 10 mA, -12 V @ 30 mA ) ■ Extension Module 63 x 107 mm Power consumption: 0.3 W (+12 V max @ 20 mA, -12 V @ 5 mA) Software Support ■ EasyMultiCam is the unique driver which serves the Picolo, Domino, and Grablink series frame grabbers. ■ The EasyMultiCam driver runs under Microsoft Windows 2000®, XP®, Server 2003®, Vista®, and Linux 7® /Kernels 2.6.18 and 2.6.24 Image Transfer The Picolo series supports PCI bus mastering. Images are transferred to the PC memory using DMA (Direct Memory Access) in parallel with the acquisition and processing. Several Picolo series boards can be simultaneously be in operation within a single PC is supported. Bitmap Image Formats Before storing the acquired images to its located memory buffer, a pixel format conversion takes place in real-time. Numerous color or monochrome formats can be chosen: RGB32, RGB24, RGB16, RGB15, Y8, YCrCb 4:2:2, YCrCb 4:1:1, Planar YCrCb 4:2:2, Planar YCrCb 4:1:1 3 4 Image Analysis Tools ■ Picolo/Picolo PCIe PCI/PCIe board, 121 x 70 mm Power consumption: 1 W (+5 V max @ 200 mA) Multiple Cameras The Picolo Pro 2/Picolo Pro 2 PCIe can acquire images from unsynchronized cameras within very short switching times. The switching time is < 33 ms for NTSC and <40 ms for PAL, therefore a total of 16 images can be acquired per second (typical). Vision Platforms Picolo/Picolo PCIe ■ Single channel real-time video capture ■ BNC, DB-9, S-Video connectors ■ 4 TTL I/O lines 2 Cameras Picolo Pro2 PCIe Image Acquisition ◆ Color Image: Color video format is compatible with the following composite video input formats: NTSC-M, NTSC-Japan, PCL-B, PALD, PAL-G, PAL-H, PAL-I, PAM-M, PAL-N and SECAM. ◆ Monochrome Image: The monochrome video acquisition is compatible with CCIR and EIA (RS-170). ◆ Optional Scaling: The acquire images or portions of images can be optionally scaled: • Acquisition of a programmable area of interest • Scaling of the image (down to 1:16) • Adjustment of hue (for NTSC signals), contrast (0 to 200%), brightness and saturation (0 to 200% for U and V signals) • Automatic chrominance gain control Frame Grabbers Introduction Ordering Information ■ Picolo Single channel true-color image acquisition card ■ Picolo PCIe PCI Express single channel true-color image acquisition card ■ Picolo Pro 2 True-color image acquisition card supports up to 4 cameras ■ Picolo Pro 2 PCIe PCI Express true-color image acquisition card supports up to 4 cameras www.adlinktech.com 1-14 C121-1-CH1.indd 14 2012/3/6 上午 11:05:38 Picolo Alert Ultra-fast Multiple-channel PCI/PCI Express® Frame Grabbers Introduction Equipped with a video-surveillance FPGA, the Picolo Alert frame grabbers are able to acquire images from up to sixteen independent cameras with a total digitizing power of 100 fps/120 fps constantly available. The user is free to share this digitizing power between the sixteen channels, based on the requirements of the application. 16 video inputs ◆ 100 fps/120 fps constantly available This is not a peak value! As a unique feature, the Alert boards offer the ability to share a total digitizing power of 100 fps / 120 fps among the sixteen video channels without switching delay. PICOLO Alert PCIe Grayscale Camera Color Camera Analog Features ■ Form factor: • 64-bit, 66 MHz PCI bus (Picolo Alert PCI) • PCI Express® x1 full-height, half-length (Picolo Alert PCIe) ■ Color (PAL/NTSC), monochrome (CCIR/EIA) cameras supported ■ 16 video inputs: 200 fps/240 fps constantly available ■ Simultaneous capture and preview functions • Automatic removal of interlacing artifacts in field mode • A large frame store for an automatic and smooth regulation of the frame rate in case of a system overuse of the PCI bus. This frame store also ensures a non disruptive image delivery to the PC memory regardless of PCI bus latencies. • Stable images regardless of video parity: The Picolo Alert boards process the acquired images on the fly eliminating all issues related to the parity management without requiring any processing power from the PC. ◆ Two simultaneous and independent video streams per camera for simultaneous capture and preview functions: A video channel PICOLO Alert PICOLO Alert PCI Destination 1 Camera Cropping Scaling Contrast, brightness, saturation Pixel formatting DMA controller CAPTURE PC Memory,... Cropping Scaling Contrast, brightness, saturation Pixel formatting DMA controller DISPLAY PC Graphic Card,... Video Digitizer Destination 2 Euresys video-surveillance FPGA Applications ■ Intelligent Transportation System (ITS) ■ Digital Video Recorder (DVR) ■ PC-based surveillance systems ■ Factory monitoring systems Each camera independently delivers data to two different memory locations in the PC, including the graphic card. Both are fully configurable for acquisition rate, image resolution, cropping, scaling, contrast, brightness, saturation, and storage Software Support • EasyMultiCam is the unique driver which serves the Picolo, Domino, and Grablink series frame grabbers. • The EasyMultiCam driver runs under Microsoft Windows 7®,2000®, XP®, Server 2003®, Vista®, and Linux Kernels 2.6.18 and 2.6.24. Ordering Information ■ Picolo Alert Ultra-fast multiple-channel PCI frame grabber ■ Picolo Alert PCIe Ultra-fast multiple-channel PCIe frame grabber 1-15 www.adlinktech.com C121-1-CH1.indd 15 2012/3/6 上午 11:05:40 Analog Picolo V16 H.264 Capture and H.264 Video Compression Card for 16 Video Inputs with Audio Capability 1 The Picolo V16 H.264 is designed for demanding video-surveillance applications by offering 16 simultaneous video streams, in both compressed video (H.264) and raw video streams. Sixteen audio inputs are also provided to provide audio recording capabilities for any video channel. The on-board decoders and processor perform on-the-fly data processing-scaling, fixed cropping, contrast, brightness, saturation, color conversion, mask or caption insertion, decimation, and storage format. The acquired streams-one compressed and one uncompressed, with different configurations-can be sent from the frame grabber memory to two different memory locations, such as the main memory of the computer for storage, and the graphic card memory for preview and display. Color Camera Analog Features Applications ■ Software Support ■ Windows® Platform • Available for Windows® 7/XP/Server 2003/Vista (64/32-bit) • Recommended programming environments: C/C++/.NET/ ActiveX controls Ordering Information ■ Picolo V16 H.264 Capture and H.264 video compression card for 16 video inputs with audio capability Accessories For more information on cables, please refer to page 2-15 Cabling • Video connectors for Video In and Out * One HD44 connector on the bracket * 75-Ohm removable termination resistors * Internal pin header connectors 3 • 1 “VIDEO IN”: 34-pin high density header, 1.27 mm pitch • 1 ‘VIDEO OUTPUT & CASCADE’: 6-pin header H.264 Compression ◆ 16 simultaneous and independent compressed (H.264) and raw video streams * Simultaneous capture and preview functions subject to PC bus available bandwidth • Compressed images > To be stored on the hard disc > To be transferred by the network • Uncompressed images 4 > For immediate display > For video analytics Image Analysis Tools Intelligent Transportation System (ITS) ■ Digital Video Recorder (DVR) ■ PC-based surveillance systems ■ Factory monitoring systems • One pass-through buffered video output with cascade capability Vision Platforms ■ PCI Express® x1 compliant ■ On-board real-time H.264 compression, 200 fps/240 fps at full resolution ■ 16 video inputs PAL or NTSC ■ Simultaneous and independent H.264 compressed and raw image transfer ■ Precise hardware controlled time stamping 2 Cameras  .264 Video ◆ 16 real-time analog video inputs - PAL / NTSC * Contrast, brightness and saturation controls available * Video presence/loss detection on-board compression Grayscale Camera Frame Grabbers Introduction * Precise time stamping * Independently configurable functions on both streams • Frame rate control • Resolution control • Overlay: insertion of caption text messages on the image • Masking: insertion of up to four rectangular masking regions on the image Camera Decoder with video detection Safety Substitution image when no video detected Contrast, brightness, saturation Interlaced to Progressive Fixed Cropping Insertion Decimation Scaler Encoder Mask, Caption 1 image out of N 1:1 or 1:2 H.264 Variable Cropping Insertion Decimation Scaler Mask, Caption 1 image out of N 1:1, 1:2 or 1:4 Color Conversion YUV to RGB or YUV to YUY Visual Formatter YUV Planar, YUV Packed or RGB Packed ■ V16 H.264 Cable • 0.3 M, one HD44 to sixteen BNC ■ Picolo V16H264 to RTV-E4 Cable • 0.3 M, one IDC44 to four ICD10 Extension Borad ■ RTV-E4 • Expandable up to 16 channels www.adlinktech.com 1-16 C121-1-CH1.indd 16 2012/3/6 上午 11:05:42 Picolo U4/U8/U16 H.264 H.264 Compression Cards for 4/8/16 Video Inputs with Audio Capability Introduction The Picolo U4, U8, and U16 H.264, respectively feature 4, 8, and 16 video input channels along with audio capability. These cards deliver dual output streams per video input: an H.264 compressed stream for highquality recording on hard disks and an uncompressed stream for immediate display of the camera signal and for the application of real-time video analytics. To fit any surveillance application, the possible settings of these output streams are completely independent. These PCI Express cards are equipped with 4, 8 or 16 highquality audio inputs as well as 8, 16 or 32 I/O lines. Coming with simple and convenient Windows DirectShow and Linux drivers, the Picolo U4, U8, and U16 H.264 are easy to use and can be immediately integrated into any DVR or CCTV application design. Cables with BNC video connectors are available for immediate evaluation of the cards.  .264 on-board compression Grayscale Camera Color Camera Analog Features ■ PCI Express® x1 compliant ■ On-board real-time H.264 compression, 200 fps/240 fps at full resolution ■ 4/8/16 video inputs PAL or NTSC ■ Simultaneous and independent H.264 compressed and raw image transfer ■ Precise hardware controlled time stamping Video ◆ 4/8/16 real-time analog video inputs (PAL/NTSC) * Contrast, brightness and saturation controls available * Video presence/loss detection • Video connectors for Video In and Out * One HD44 connector on the bracket * 75-Ohm removable termination resistors * Internal pin header connectors • 1 Video In: 34-pin high density header, 1.27 mm pitch • 1 Video Output & Cascade: 6-pin header H.264 Compression ◆ 4/8/16 simultaneous and independent compressed (H.264) and raw video streams * Simultaneous capture and preview functions subject to PC bus available bandwidth • Compressed images Applications ■ Intelligent Transportation System (ITS) ■ Digital Video Recorder (DVR) ■ PC-based Surveillance Systems ■ Factory Monitoring Systems Software Support ■ Windows® Platform • Available for Windows® 7/XP/Server 2003/Vista (64/32-bit) • Recommended programming environments: C/C++/.NET/ ActiveX controls Ordering Information > Can be stored on the hard disc > Can be transferred by the network • Uncompressed images > Can be immediately displayed > Can be used for video analytics * Precise time stamping * Independently configurable functions on both streams • Frame rate control • Resolution control • Overlay caption text up to 2 lines with a maximum of 47 characters displayed Camera Decoder with video detection Safety Substitution image when no video detected Contrast, brightness, saturation Interlaced to Progressive ■ Picolo U4 H.264 H.264 compression card for 4 video inputs with audio capability ■ Picolo U8 H.264 H.264 compression card for 8 video inputs with audio capability ■ Picolo U16 H.264 H.264 compression card for 16 video inputs with audio capability Decimation Scalar 1 Image out of N 4CIF, 2CIF CIF or QCIF Decimation Scalar 1 Image out of N 4CIF, 2CIF CIF or QCIF Encoder H. 264 Compressed images Visual Formatter Uncompressed images Can be stored on the hard disc Can be transferred by the network Can be immediately displayed Can be used for video analytics Accessories For more information on cables, please refer to page 2-15 Cabling ■ U4 H.264 Cable One HD44M to four RCA Cable ■ U8 H.264 Cable One HD44M to eight RCA Cable ■ U16 H.264 Cable One HD44M to sixteen RCA Cable 1-17 www.adlinktech.com C121-1-CH1.indd 17 2012/3/6 上午 11:05:44 Analog Domino Melody Single Channel High-quality Progressive Scan Analog Frame Grabber 1 The Domino Melody is a high-quality and cost-effective acquisition board for industrial monochrome analog cameras. It incorporates D3 Technology* to provide perfect digital images. This frame grabber is an ideal solution for mono-camera applications inspecting fast moving objects. D3 Technology™ (Please refer to page 1-19 for details.) Analog Features ■ ■ ■ ■ ■ • Black level restoration • Color control • Synchronization recovery: vertical and horizontal • Color sub-carrier removal • Sampling clock generation • Look-up table, gamma handling • Low-pass filtering • Control over horizontal and vertical pixel counts • Gain, offset control Camera and I/O Connectors Image Acquisition ◆ One HD15 video connector ◆ One RJ45 system connector ◆ One 10-pin header video connector 1 2 3 4 5 6 7 8 3 TR+ TREnhanced I01 Enhanced I02 +5V GND ST+ ST- DB9F Connector Trigger, Strobe, Enhanced I/O Lines Ordering Information ■ ■ Domino Melody Single channel high-quality progressive scan analog frame grabber One opto-isolated output line for safe control of external equipment ■ One differential input line for high-speed, robust and flexible control from external equipment ■ Two digital TTL I/O lines for general purpose control 2 in the digitaldomain: Vision Platforms ■ 32-bit, 33 MHz low-profile compatible 10-bit, 40 MHz A/D converter Supports one single-tap monochrome camera Trigger, strobe I/O and two enhanced I/O lines 16 MB on-board frame buffer Asynchronous reset support, shutter control Full digital signal processing for analog image acquisition D3 Technology™ performs all the following functions 4 Accessories ■ ■ EasyMultiCam is the unique driver which serves the Picolo, Domino, and Grablink series frame grabbers. Image Analysis Tools For more information on cables, please refer to page 2-15 Software Support Cameras Grayscale Camera ◆ Frame Grabbers Introduction Cabling ■ Domino Cable 5 M, one HD15 to one Hirose The EasyMultiCam driver runs under Microsoft Windows 2000®, XP®, Server 2003®, Vista®, 7and Linux Enterprise Server 10. www.adlinktech.com 1-18 C121-1-CH1.indd 18 2012/3/6 上午 11:05:45 Domino Harmony 2-CH Color/Monochrome Progressive Scan Analog Frame Grabber Introduction The Domino Harmony is a dual-camera acquisition board for industrial monochrome and RGB analog cameras. It incorporates D3 Technology™ to provide perfect digital images to color applications. D3 Technology™ Benefits ◆ No need for pixel clock, or even HD/VD, thanks to absolute digital stability ◆ Simplified cabling, improved robustness ◆ Excellent performance reproducibility Grayscale Camera RGB Camera ◆ Reduce the analog processing of the video signal to a minimum • Ultra-low jitter, JITTER = 0.32 ns • High image quality, SNR = 64 dB Analog Features ■ 64-bit, 66MHz PCI bus ■ One RGB or two monochrome cameras ■ Four 10-bit, 40 MHz A/D converters ■ Two DMA channels ■ Trigger, strobe I/O and two enhanced I/O lines ■ Asynchronous reset support, shutter control, synchronization ■ 32 MB frame buffer Applications ■ ■ ■ ■ ■ ■ Quality control Semiconductor inspection PCB inspections FPD inspections On-the-fly image acquisition High frame rate image acquisition D3 Technology performs all the following functions in the digital domain: ◆ Black level restoration ◆ Sampling clock generation ◆ Gain, offset control ◆ Color sub-carrier removal ◆ Control over horizontal and vertical pixel counts ◆ Synchronization recovery: vertical and horizontal ◆ Low-pass filtering In the new Domino frame grabbers implementing D3 Technology, the input video signal is immediately digitized with a very high accuracy and a high frequency. Analog conditioning of the signal is reduced to a minimum and all signal processing tasks traditionally performed by analog circuits are now carried out in the digital domain. Software Support • EasyMultiCam is the unique driver which serves the Picolo, Domino, and Grablink series frame grabbers. • The EasyMultiCam driver runs under Microsoft Windows 2000® , XP® , Server 2003® , Vista® , 7and Linux Enterprise Ordering Information ■ Domino Harmony 2-CH color/monochrome progressive scan analog frame grabber Accessories For more information on cables, please refer to page 2-15 Camera and I/O Connectors Cabling ■ Domino Cable 5 M, one HD15 to one Hirose12 TRXTRYSTXSTYPGND TRX+ TRY+ STX+ STY+ +5V 6 1 Enhanced I01 2 Enhanced I02 3 Enhanced I03 14 10 4 Enhanced I04 15 GND 11 7 12 13 8 9 5 1-19 www.adlinktech.com C121-1-CH1.indd 19 2012/3/6 上午 11:05:48 Analog Domino Symphony PCIe High-speed 4-CH PCI Express® Analog Frame Grabber 1 The Domino Symphony PCIe is a high-speed analog frame grabber. It provides affordable image acquisition for applications with multiple monochrome cameras. D3 technology™ (Please refer to page 1-19 for details.) D3 Technology performs all the following functions in the digital domain: ◆ Black level restoration ◆ Sampling clock generation ◆ Gain, offset control ◆ Color sub-carrier removal ◆ Control over horizontal and vertical pixel counts ◆ Synchronization recovery: vertical and horizontal ◆ Low-pass filtering Analog 2 Cameras Grayscale Camera Frame Grabbers Introduction Camera and I/O Connectors Features Applications ■ ■ ■ ■ ■ Software Support ■ EasyMultiCam is the unique driver which serves the Picolo, Domino, and Grablink series frame grabbers. ■ The EasyMultiCam driver runs under Microsoft Windows 2000®, XP®, Server 2003®, Vista®, 7and Linux Enterprise Server 10. TRA+ TRB+ TRC+ TRD+ STA+ STB+ STC+ STD+ PGND 19 20 21 22 23 24 25 26 10 11 12 13 14 15 16 17 18 1 2 3 4 5 6 7 8 9 3 I01 GND I02 GND I03 GND I04 GND +5V 4 Type of Connector I/O lines On the bracket: One HD26 system connector 4 opto-isolated output lines for safe control of external equipment Internal: One 26-pin header 4 differential LVDS input lines for high-speed, robust and flexible control from external equipment 4 digital TTL I/O lines for general purpose control Image Analysis Tools ■ Quality control Semiconductor inspection PCB inspection FPD inspection On-the-fly image acquisition High frame rate image acquisition TRA+ TRB+ TRC+ TRD+ STA+ STB+ STC+ STD+ Vision Platforms ■ PCI Express® x1 full-height, half-length ■ Supports four single-tap cameras ■ Trigger, strobe, enhanced I/O lines ■ 10-bit 65 MHz A/D converters ■ 64 MB frame buffer ■ Supports D3 technology Ordering Information ■ Domino Symphony PCIe High-speed 4-CH PCI Express® analog frame grabber Accessories For more information on cables, please refer to page 2-15 Cabling ■ Domino Symphony Cable 0.3 M, one HD44 to four HD15 ■ Domino Cable 5 M, one HD15 to one Hirose12 www.adlinktech.com 1-20 C121-1-CH1.indd 20 2012/3/6 上午 11:05:50