Preview only show first 10 pages with watermark. For full document please download

Framesaver 9120 Access Unit Errata

   EMBED

Share

Transcript

TM FrameSaver 9120 Access Unit Errata Document Number 9121-A2-GK43-00 June 1998 This document contains information concerning the use of the FrameSaver 9120 access unit that is not included in your user documentation. Keep this document with your FrameSaver 9120 access unit’s documentation. This information applies to the following documents: 9121-A2-GK43-00  FrameSaver 9120 User’s Guide (Document No. 9121-A2-GB20-10)  Quick Reference, included with the FrameSaver 9120 User’s Guide  FrameSaver 9120 Technical Reference (Document No. 9121-A2-GH30-10) June 1998 1 Increased the Number of Digits for ISDN BRI-Bn Telephone Number under ISDN BRI DBM Configuration Options The BRI-Bn Phone Number configuration option has increased the number of digits allowed from 7 to 19. Table 4-4. ISDN BRI DBM Options BRI-Bn Phone Number Possible Settings: 7–19 digits Default Setting: Clear Provides the telephone number associated with the Bearer channel, B1 or B2. This configuration option must contain a phone number or BRI must be set to Disable. 7–19 digits – Where you enter the telephone number. If a nondigit/numeric is entered, an Invalid Character (x) message appears at the bottom of the screen. If fewer than 7 digits/numerics are entered, an Invalid – Phone number must be at least 7 digits message appears at the bottom of the screen. Clear – Clears the phone number field so it can be reentered. This change affects the following documents and pages: 2  Quick Reference, ISDN BRI, page 7.  Technical Reference, Setting Up the ISDN BRI DBM Interface’s Physical Options, page 4-35.  Technical Reference, ISDN BRI DBM Options Configuration Worksheet, page B-4. June 1998 9121-A2-GK43-00 Added No Caller ID Status Message to DBM Interface Status A No Caller ID Message was added to the DBM Interface Status under the Remote Call ID field. Field Status What It Indicates Remote Call ID No Caller ID The network is not providing the caller ID of the calling device. This change affects the following document and page:  9121-A2-GK43-00 User’s Guide, DBM Interface Status, page 4-20. June 1998 3