Transcript
Pumpkin and Crow 13” X 14” Pillo
w
FREE PATTERNS
Flowers in the Pumpkin 17” X 20” Wall Hanging Materials needed: One Pumpkin Patch panel #2770-88
Pumpkin and ed: w Flowers in th e Pumpkin Materials needCro 1/8 yard for sashing 17”pkin One X 20Patc Pum ” W:h pane Finis al13” #277 hed l Han Size #2776-87 xl gi 14” ng 0-88 1-1/2” strip of orange for sash ing #2776-87 3/8 yard for pumpkin border/backin g #2771-12 1/3 yard for border/binding Materials ne eded: **Before #2774-28 cutting the fabric strips, set asid O ne Pu e a piece of border fabrm in Pa icpk 13-1/ 2”tcXh16” pane for l the backing #2770-88 backing for pane yard the 1/2Trim 1. l picture outside the red edge with ¼” extra all the way around. 2. Cut one 1-1/2” strip of orange fabric for the sashing. 1/8 yard for sash ing 3. Sew the strip to each side and trim the excess each time. #2549-12 4. Sew the remainder to the top and bottom and trim the excess on 5. Cut three 2-1/2” strips of oran 1/3 yard for the ends. ge fabric for the oute bord r border from er/b the indiinde rema ng r of the backi 6. Sew one strip to one side and trim #2773-40 the excess. Cutting: 7. Sew the remainder of the same strip to the other side. orange #2776-87 Sashing 8. dark Sew the remaining two strips the 1/2 yard for top and bottom bord strips 1-1/2” 2 er and trimba ckexce ing ss. the 9. Lay the pieced top with right sides together on the backing fabri c. 10. Lay both pieces on top of two layers of quilt batting. inding orange #2774-28 Border/b 11. Sew all the way around, leaving abou t 6” openCfor turning, starting and 2-1/2” strips 2 stopping on the utting: bottom. Trim the seam and turn ) the pillow top 2-1/2” strips (binding 2 out. Saright sh gside 12. Push the corners out and smo black flo oth the seams. Stuff in ra with -fil l #2549-12 2 batting. Hand-stitch the opening 1-1/Poly 2” stripsbetween the two layers of closed.
Border/bindi red edge with ¼” extra all the way around. the kin picture the panel Trim Pump Theoutside rs In Flowe ng green #2 www.prairiegr 773-40 eddl 2 ovep2m Flowers In2”er.co The Cut two 1-1/2” strips of dark orange fabric for the sashing. 1/ strips Pumpkin ge Oran panel. the ing match to Hang ends the Wall on excess the trim 2 and side each to strip sashing Sew one 2-1/2” strips Wall Hanging (binding) top and bottom and trim the excess. to the g strip17” x 20” remainin Sew the Size: Finished border. the for Finished Size: 17” x 20” fabric 1. Cut two 2-1/2” strips of lighter orange Trim thePatch The Pumpkin X 25” Table Runner/ Mat panel pi13” cture outsid Sew one border strip to each side and trim2.theCexcess. e the red edge ut two 1-1/2” with ¼” extr stri the and trim ps excess. andSebottom of black fabr a all the way Sew the remaining border strip to the top 3. w one sashin ic for the sash around. the quilt. g striorp machine Hand fabric. ing. backing and to batting of layer a on ea top 4. quilt the ch Lay Sew the rem side and trus im ai continuo a ni th making ng end, e to end ex sew and st fabric ce ri border of ss on the ends p to the top 5. Cut two Cut two 2-1/2” X WOF strips and bottom to match the 2-1/2” strips and trim the panel. of green fabr 6. Sew one strip of binding for the quilt. excess. ic fo bo r th rd e border. er st flat. ri press and p out, sides to right with se, ea 7. Sew the ch 10. Fold in half lengthwi si de an d remaito im the excess of thetrquilt. ning outside thebo edges rder stedge . 8. the 11. Pin around the edge of the pieced top with rip to the top Layraw the quilt top and bottom corner. each on miter top, pieced the a of top la the to down ye face and trim the 9. binding r the of batting an 12. Sew Cut two 2-1/ excess. d backing fa 2” X WOF st bric. Hand or rips of border binding for machine the fabric and se the quilt. quilt. w end to end, 10. Fold in ha making a co lf lengthwis ntinuous stri e, with right 11. Pin arou p of si de nd s out, and pr the ed of the quilt. chgeon hand-stit ofthe ess flat. theback 12.pin, pieced Sewand 13. Overlap the ends. Fold over to the back, the binding to p w ith th e raw edges face down to to the outsid the top of th e edge of the e pieced top, quilt. miter each co rner. www.prairiegrovepeddler.com
1. 2. 3. 4. 5. 6. 7. 8. 9.
13. Overlap
the ends. Fo ld over to th
e back, pin,
and hand-stit
www.prairie grov
ch on the ba
epeddler.com
The PumpkinMaterials Patch Table needed:Runner/Mat Finished Size: 13”panel x 25”#2770-88 One Pumpkin Patch fabric 1/8 yard for sashing #2776-40 3/8 yard for border/ binding #2774-40
ck of the quilt
.
Flowers in the Pumpkin 17” X 20” Wall Hanging Materials needed: One Pumpkin Patch panel #2770-88 1/8 yard for sashing #2549-12 1/3 yard for border/binding #2773-40 1/2 yard for backing
Cutting: Sashing black floral #2549-12 2 1-1/2” strips Border/binding green #2773-40 2 2-1/2” strips 2 2-1/2” strips (binding)
1. 2. 3. 4. 5. 6. 7. 8. 9.
Trim the panel picture outside the red edge with ¼” extra all the way around. Cut two 1-1/2” strips of black fabric for the sashing. Sew one sashing strip to each side and trim the excess on the ends to match the panel. Sew the remaining strip to the top and bottom and trim the excess. Cut two 2-1/2” strips of green fabric for the border. Sew one border strip to each side and trim the excess. Sew the remaining border strip to the top and bottom and trim the excess. Lay the quilt top on a layer of batting and backing fabric. Hand or machine the quilt. Cut two 2-1/2” X WOF strips of border fabric and sew end to end, making a continuous strip of binding for the quilt. 10. Fold in half lengthwise, with right sides out, and press flat. 11. Pin around the edge of the pieced top with the raw edges to the outside edge of the quilt. 12. Sew the binding face down to the top of the pieced top, miter each corner.
13. Overlap the ends. Fold over to the back, pin, and hand-stitch on the back of the quilt.
www.prairiegrovepeddler.com
Flowers in the Pumpkin 17” X 20” Wall Hanging Materials needed: One Pumpkin Patch panel #2770-88 1/8 yard for sashing #2776-87 1/3 yard for border/binding #2774-28 1/2 yard for backing
Cutting: Sashing dark orange #2776-87 2 1-1/2” strips Border/binding orange #2774-28 2 2-1/2” strips 2 2-1/2” strips (binding)
1. 2. 3. 4. 5. 6. 7. 8. 9.
Trim the panel picture outside the red edge with ¼” extra all the way around. Cut two 1-1/2” strips of dark orange fabric for the sashing. Sew one sashing strip to each side and trim the excess on the ends to match the panel. Sew the remaining strip to the top and bottom and trim the excess. Cut two 2-1/2” strips of lighter orange fabric for the border. Sew one border strip to each side and trim the excess. Sew the remaining border strip to the top and bottom and trim the excess. Lay the quilt top on a layer of batting and backing fabric. Hand or machine the quilt. Cut two 2-1/2” X WOF strips of border fabric and sew end to end, making a continuous strip of binding for the quilt. 10. Fold in half lengthwise, with right sides out, and press flat. 11. Pin around the edge of the pieced top with the raw edges to the outside edge of the quilt. 12. Sew the binding face down to the top of the pieced top, miter each corner.
13. Overlap the ends. Fold over to the back, pin, and hand-stitch on the back of the quilt.
www.prairiegrovepeddler.com
The Pumpkin Patch 13” X 25” Table Runner/ Mat
Materials needed: One Pumpkin Patch fabric panel #2770-88 1/8 yard for sashing #2776-40 3/8 yard for border/ binding #2774-40 Sashing #2776-40 2 1-1/2” strips
Cutting: Border #2774-40 2 2-1/2” strips 2 2-1/2” strips (used for binding)
1. Trim the panel picture outside the red border with ¼” extra all the way around. 2. Cut two 1-1/2” strips of green fabric for the sashing. 3. Sew one strip down one side and the second strip down the other side. 4. Trim the excess on both ends to match the panel. 5. Using the remaining partial strips, sew to the top and bottom and trim the excess. 6. Cut two 2-1/2” strips of lighter green fabric for the border. 7. Sew one strip down one side and the second strip down the other side. 8. Sew the remainder of each strip across the top and bottom and trim the excess. 9. Lay the runner on a layer of batting and backing fabric. Hand or machine the quilt. 10. Cut two 2-1/2” X WOF strips of border fabric and sew end to end, making a continuous strip of binding for the quilt. 11. Fold in half lengthwise, with right sides out, and press flat. 12. Pin around the edge of the pieced top with the raw edges to the outside edge of the quilt. 13. Sew the binding face down to the top of the pieced top, miter each corner.
14. Overlap the ends. 15. Fold over to the back, pin, and hand-stitch on the back of the quilt. www.prairiegrovepeddler.com
Pumpkin and Crow 13” X 14” Pillow
Materials needed: One Pumpkin Patch panel #2770-88 1-1/2” strip of orange for sashing #2776-87 3/8 yard for pumpkin border/backing #2771-12 **Before cutting the fabric strips, set aside a piece of border fabric 13-1/2” X 16” for the backing 1. Trim the panel picture outside the red edge with ¼” extra all the way around. 2. Cut one 1-1/2” strip of orange fabric for the sashing. 3. Sew the strip to each side and trim the excess each time. 4. Sew the remainder to the top and bottom and trim the excess on the ends. 5. Cut three 2-1/2” strips of orange fabric for the outer border from the remainder of the backing. 6. Sew one strip to one side and trim the excess. 7. Sew the remainder of the same strip to the other side. 8. Sew the remaining two strips the top and bottom border and trim the excess. 9. Lay the pieced top with right sides together on the backing fabric. 10. Lay both pieces on top of two layers of quilt batting. 11. Sew all the way around, leaving about 6” open for turning, starting and stopping on the bottom. Trim the seam and turn the pillow top right side out. 12. Push the corners out and smooth the seams. Stuff with Poly-fil between the two layers of batting. Hand-stitch the opening closed. www.prairiegrovepeddler.com
