Preview only show first 10 pages with watermark. For full document please download

Free Space Optical Transmission Products Fiber Optic & Ethernet Network Solutions

   EMBED


Share

Transcript

Fiber Optic | Copper | Wireless Free Space Optical Transmission Products Fiber Optic & Ethernet Network Solutions Fiber in the Sky The SkyLaser line from ComNet consists of an easy-to-install, pre-packaged point-to-point kit that contains everything you need to establish a fully symmetrical gigabit Free Space Optical link. Two kits are available, supporting transmission distances up to 1,500 meters. Unlike the diminishing throughput of an RF wireless system, SkyLaser units support full duplex gigabit throughput up to the maximum operating range. There is no degradation in system performance due to external noise or radar transmission. The industrially hardened units with gigabit Ethernet interfaces offer the options to be powered by a PoE switch or the supplied mid-span power injector. Features NetWave® Collecting Signals ›› Industrially designed for outdoor applications - Ruggedized enclosures meet class IP66 dust and water ingress protection standards ›› Full 1 Gbps symmetrical throughput over transmission distance ›› Very low latency ›› Global license-free operation ›› Built-in alignment features simplify installation ›› Eye-safe Laser operation ›› Low power consumption ›› IEEE802.3af (PD) compliant PoE support ›› SNMP or web based management ›› Small size and light weight Control Room Switch Browser-Based Control Panel A True Alternative To Fiber Optic Transmission These pre-configured environmentally hardened kits include everything you need to install and connect them. These Free Space Optical products offer the same practical bandwidth as fiber optic transmission without the installation costs associated with trenching new optical fiber. The SkyLaser kit transmits a full duplex gigabit Ethernet data stream up to 1500 meters between a pair of aligned SkyLaser Free Space Optical (FSO) devices. An integrated scope supports rough scale alignment with easy-toread visual indicator LEDs showing the accuracy of the alignment. Fine-scale alignment is then adjusted via the included web server interface at the install location to maximise link performance. Kit Includes ›› Two identical Free Space Optic head units in ruggedized IP66 rated enclosures ›› Two mounting hardware assemblies ›› Two PoE Mid-Span Power Injectors ›› Units can be powered by an IEEE 802.3af/at compliant PoE switch (not included) ›› 5 year warranty SkyLaser Free Space Optical Point-to-Point Kits Operating Temperature Range Power Transmission Wavelength Transmission Power (EIRP) # of Laser Transmitters Receiver Sensitivity Throughput Operating Distance FSO1GSR FSO1GLR -20° to +75°C -20º to +75ºC 48 to 56 VDC 48 to 56 VDC Mid-span Power Injector (included) or PoE Mid-span Power Injector (included) or PoE 850 nm 850 nm +10 dBm +16 dBm 1 4 -38 dBm -38 dBm Full Duplex 1 Gbps Full Duplex 1 Gbps < 600 m < 1500 m www.comnet.net Technical Centre All SkyLaser topologies are point-to-point due to the nature and operation of the system. It operates similar to a length of cable connecting two Ethernet devices. You can build different topologies using Ethernet switches and using the SkyLaser system to connect the switches. The units themselves operate as Layer 1 point-to-point Ethernet connecting devices. There are two physical connections on all SkyLaser products. The first is the data connection and the second connection supports the power and out-of-band management interface. This dual port operation provides a further level of security by keeping the data the device is carrying separated from the management port. Environmental Conditions Like any other wireless system, SkyLaser can be affected by the local environmental conditions. The throughput of the system does not degrade but if the environmental effect is great enough, then the link may drop. The major issue is fog, as the dense water molecules in the sky absorb or refract Laser energy, preventing the transmitted beam from reaching the receiver. When visibility is low, the SkyLaser performance is still twice that of a human in the same conditions. If, on a fog-bound morning, the human eye is able to see 100 meters the Free Space Optics system would see approximately 200 meters. Simple Alignment Process 1. Optical Scope Alignment 2. Bar Graph Indication 3. Web Server Fine Tune Network Redundancy To provide high speed redundancy, and provide continuous operation in dense fog, a microwave redundant path can be configured. NWK9[E] and CNGE2+2SMS Using the ComNet CNGE2+2SMS switch in Redundant SFP (RSFP) mode, the Free Space Optic link acts as the primary and the microwave link the backup with a fail-over time of <1 second. The ComNet NetWave® NWK9[E] kit should be used as the backup microwave link to provide as much throughput as possible. www.comnet.net Typical Applications Redundant Path Topology FSO1GLR FSO1GLR Primary FSO Transmission Path CNGE2+2SMS Switch in RSFP Mode CNGE2+2SMS Switch in RSFP Mode NW9 Client NW9 Access Point Secondary Microwave NetWave® Transmission Path Connection between Multiple Buildings in a City Link Over an Airport or Large Body of Water (Immune to RF Interference) Full Duplex 1Gbps Free Space Optical Link FSO1GLR INCLUDED -20 TO +75ºC 802.3AF PD Solar Power Ethernet 15 Watts Continuous Kit for Remote Locations Power System with 3 Hours of Peak Sunlight 1 GBPS wire link that supports Space Optical are designed for 1Gbps Free with The units supplied is a full duplex up to 1.5km. nts and are The FSO1GLR LASER re environme on over distances integrated speed transmissi tioned temperatu installation. Four optical alignment in non-condi then and simple operation for quick which can and the integrated hardware availability course alignment any remote mounting high level from nt and quick rs provide deployme transmitte stepper motorsand high security for rapid electronic on a low latency precision scope provides required using high y offers very licensing be fine tuned to provide The technolog fiber. There is no available required. to re feature is alternative location as temperatu us alignment movements due to units a true autonomo making the or mast An optional building global basis. tion for slow security compensa for increased automatic interface ent s etc. g. fluctuation d web managem and monitorin out-of-ban diagnosis t to all Ethernet feature an for remote transparen The units units are SNMP capability such as linear, FSO1GLR the topology along with ct the 1 devices of network to interconne any kind as true layer switches Operating used to create managed and can be standard protocols by adding ns are also mesh simply applicatio ring and devices. different Optical for many Free Space brackets mounting designs. heavy duty pedestal Optional wall and including available NWKSP2 BATTERIES FEATURES › Warranty: 1 Year on Battery 2 Years on Solar Panels and Hardware › Intelligent Controller › Solar panels are designed • Solar Controller Featuring: with heavy duty that are capable Diagnostics LCD anodized frames of withstanding Display Readout of Several high wind pressure, snow load. Parameters Including Supporting hail and Discharge and System Charge/ • Ampere Hours Battery Voltage feature outstanding Monitoring of low light performance Accumulated Discharge › Two High Efficiency Charge/ Multicrystalline • Intelligent PWM Photovoltaic › Weatherproof Charge Controller Solar Panels powder coated • Automatic Temperature steel enclosure NEMA 4X/IP65 Compensation that meets weatherproofin • Adjustable Charge/Discha g standards › Valve Regulated rge Control Parameters • Battery Low Voltage Sealed Lead Disconnection Acid AGM Battery low temperature • Battery Reverse with great performance to -40ºC • Overload/Shor Connection Protection › 12 VDC Solar t Circuit Protection Charge Controller with LCD Screen, PWM Charging APPLICAT IONS Mode, Adjustable Intelligent parameters charging and discharging › Remote Surveillance › 48 VDC Gigabit Cameras PoE Injector › Wireless Perimeter Surveillance › Temporary Network Surveillance Deployments › Construction Site Network Access › Solar Panels FEATU RES channel duplex Ethernet 1Gbps full › Wire speed operation (-4°F to +167°F) exempt global › License to +75°C re: -20°C max with Temperatu on, 12 W › Operating consumpti standard af PD (6 W › IEEE802.3 motors) alignment installation for simple Frame and Jumbo › Scope alignment multicast t to Unicast, › Transparen 5 YEAR WARRAN Rings t Ethernet Redundan in High Speed › Can be used and V2c › SNMP V1 quality mount factor with high › Small form enclosure solid aluminium available › IP 66 rated ing software Auto-Track › Integrated Warranty › Five Year TECH SUPPOR OMNET.NET TY WWW.C T: 1.888.678.9427 803.2af INCLUDED The NetWave® NWKSP2 Solar off the grid power a remote camera system is designed or wireless repeater for applications power is too is needed but where expensive. NetWave power is not available or Solar is a complete edge communication the cost to run system for providing s equipment. The kit includes valve-regulated remote power high quality lead-acid battery, to photovoltaic outdoor enclosure, injector and mounting solar panels, solar charge hardware. The controller, PoE steel outdoor tamper proof midspan locks operated enclosure has a gasket hinged by a special key on a two to four lid with two for high security. inch pole or The enclosure wall mounted Panels include can be mounted with the included a top of pole mounting hardware. mount requiring available as an The Solar a 4” diameter optional accessory. pole. A side The included screen for local of pole mount 30A solar charge diagnostics and is controller supports system health battery protection monitoring, Intelligent an LCD from overcharge PWM charging and over discharge deep cycle and mode and cold weather while the battery performance. provides outstanding LIMITED WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9 427 Complete Product Documentation The complete SkyLaser product line is listed on ComNet’s website, along with data sheets, quick start guides, and intruction manuals. Scan this QR Code or visit http://bit.ly/SkyLaser-Products License Free Use Free Space Optical technology can be installed license free on a global basis, offering unrestricted use in any country and does not have the Operational Costs associated with Licensed microwave technology. Low Power Consumption The unique design of SkyLaser provides ultra-low power consumption levels. Both units can be powered from IEEE 802.3af compliant PSE devices. Auto Tracking Software SkyLaser optional Auto Tracking Software is available for users who will experience building movement due to environmental conditions through the course of a day. 5 Year Warranty ComNet offers a complete warranty on materials and workmanship and will repair or replace any SkyLaser product for a period of five years. True Fiber Replacement The ComNet SkyLaser is a cost-effective alternative to fiber optic transmission, offering symmetrical output of 1 Gbps and lower latency. It’s a true alternative to leasing a private fiber or the labor and materials required for a new fiber installation. www.comnet.net Optional Accessories FSOBKT1 sidewall mounting bracket FSOBKT2 sidewall mounting bracket with 1.5M pole FSOBKT3 pedestal mounting bracket Compatibility Part No Description FSO1GSR FSO1GLR FSOAAL Free space optic autonomous alignment software license. Provides automatic re-alignment of lasers in the event of small movements such as building expansion/contraction. • • FSOBKT1 Free space optic sidewall mounting bracket • • FSOBKT2 Free space optic sidewall mounting bracket with 1.5 meter pole • • FSOBKT3 Free space optic pedestal mounting bracket • • Solar Power for FSO Transmission ComNet Solar kits provide remote power to networked edge equipment, and include a high quality photovoltaic solar panel, outdoor enclosure with gasketed hinged lid and two tamper proof locks, power controller with integrated power injection module, all the mounting hardware and is available with or without sealed lead acid batteries. The equipment can be mounted to a two-to-four inch (five to ten centimeter) pole or to a wall with the included mounting hardware. The included controller protects against overcharge and over discharge while optional high performance batteries give the best available deep discharge and temperature performance. NWKSP1 NWKSP2 NWKSP3 NWKSP4 Continuous Power Peak Sunlight 15 W 6 hr Battery Capacity 110 Ah 15 W 30 W 30 W 3 hr 6 hr 3 hr 110 Ah 220 Ah 220 Ah Battery Voltage 12 V 12 V 24 V 24 V Reserve Time¹ 40 hr 40 hr 40 hr 40 hr PoE Output Voltage 48 V 48 V 48 V 48 V 162 lb (73 kg) 179 lb (81 kg) 299 lb (135 kg) 418 lb (189 kg) System Weight with Batteries² [1] Includes 25% battery derating for moderately low temperatures. [2] Kits are optionally available without batteries included. Part No. Description NWKSP1 15 W continuous power solution with 120 W Solar Panel NWKSP2 15 W continuous power solution with 240 W Solar Panel NWKSP3 30 W continuous power solution with 240 W Solar Panel NWKSP4 30 W Continuous power solution with 480 W Solar Panel Accessories Enclosure, Controller, Solar Panel, Cables (Included) Mounting hardware for the Solar Panel and Enclosure (Included) The Possibilities Are Endless The ComNet SkyLaser FSO products create a network that’s as flexible as you need it to be. There are too many possible applications to show them all in this brochure! Scan this QR Code to access the SkyLaser FSO Network Application Design Guide, or visit: http://bit.ly/FSO-Design-Guide Technical Support Delighting the Customer The ComNet Technical Support and Design Center provides pre-sale and post-sale support for Ethernet transmission network and fiber optic system design. The department is staffed by some of the most highly experienced, regarded and recognized experts in the industry. Our direct Design Center phone number is 1-888-678-9427 or you can call 1-203-796-5300 in the US or +44 (0)113 307 6409 throughout Europe and ask for the Design Center, or contact us by E-mail at [email protected] ComNet’s Customer Care Center is here to provide solutions. Staffed by experienced, knowledgeable, and courteous representatives, the ComNet Customer Care team is there to help. Customer Care representatives are available to answer your questions concerning pricing, product availability, order status, shipping dates, returns, warranty claims and so much more. We’re so confident in the long-term reliability of our products, we back them with a no-questions asked Lifetime Warranty. Product Training and Education ComNet offers a full curriculum of fiber optic and Ethernet product training designed to educate you to make the right choices when selecting transmission equipment for your projects. Available online or in-person, ComNet training qualifies for CEU credit. 3 Corporate Drive | Danbury, CT 06810 | USA T: 1 (203) 796-5300 | F: 1 (203) 796-5303 Tech Support: 1 (888) 678-9427 [email protected] www.comnet.net 8 Turnberry Park Road Gildersome | Morley | Leeds, UK LS27 7LE T: +44 (0)113 307 6400 F: +44 (0)113 253 7462 [email protected] © 2015 Communication Networks. All Rights AGENCYCOMPLIANCE COMPLIANCE AGENCY COMPLIANCE AGENCY Reserved. “ComNet,” the “ComNet Logo,” “NetWave” and the “NetWave Logo” are trademarks of Communication Networks. ComNetB13 – Rev. 02 Nov 15 Travel light! This brochure and other ComNet product literature is available online. Scan this QR Code with your mobile device, or visit http://bit.ly/ComNet-Product-Literature