Preview only show first 10 pages with watermark. For full document please download

Freedom 140 La

   EMBED


Share

Transcript

Freedom 140 LA Remote Security System Standard Features: The Freedom-140 LA features light flash, an electronic siren and horn honk output, and a built-in dual-zone shock sensor. This unit includes two stylish 4-button transmitters, a mini electronic 6-tone siren, a starter interrupt socket and relay. Two Transmitters Included: Stylish mini 4-Button stainless steel -trimmed transmitters with Lock, Unlock & 2 small lower buttons. Omega part #4412-09SSI Omega part #4412-09EI Transmitter Operations: Lock Button - Press and release to arm/lock. Press and hold to activate panic. Unlock Button -Press and release to disarm/unlock. Small Middle Button- Press and hold 3 seconds for Auxiliary Channel. Press twice for Silent Arm / Disarm. Small Bottom Button- Press and hold to activate Remote Anti-Carjack. How to Code the Transmitters: Turn “on” the ignition, then press the valet switch 5 times and wait for siren to chirp confirmation of entry into programming mode. Press and release any button on each remote to be coded (one at a time). The system will respond to each with an audible confirmation. Programmable Features The alarm has 8 programmable features which allow it to be customized to suite many individual needs. Feature # Feature #1 Internal Shock Sensor Feature #2 Double Pulse Unlock Feature #3 Last Door Arming & Locking Feature #4 Automatic Rearming Feature #5 Siren & Horn or Horn Feature #6 Ignition Activated Anti Car-Jacking Feature #7 Remote & Door Activated Anti Car-Jacking Feature #8 Ignition Controlled Lock & Unlock Default ON Single ON ON Siren & Horn OFF OFF ON Switch On ON Double ON ON Siren & Horn ON ON ON Switch Off OFF Single OFF OFF Horn Only OFF OFF OFF Program these features by first disconnecting power to the alarm (remove the fuse on the red wire), then selecting the position of “Dip Switches” as needed, and then repowering the alarm. Specifications subject to change 1/11 Specifications subject to change 1/11 Siren Pin-Switch (-) 15 Amp Light Input (+) or (-) Trunk Release Car Horn / Claxon Green - Verde = (-Lock, -Cierre) Blue - Azul = (- Unlock, - Apertura) Valet Switch Status Light 1234 1234 1234 1234 1234 1234 1234 1234 1234 1234 Parking Lights / Luces Yellow - Amarillo = (+Accessory, Ignición +) Brown - Café = (+Siren/Horn, +Sirena/Claxon Red - Rojo = (+12 Volts, +12 Voltios) White - Blanco = (+Flashing Lights, +Luces) Black - Negro = (-Ground, -Tierra) Brown/White - Café/Blanco = (-Horn Output, Salida claxon -) Red/White - Rojo/Blanco = (Light Flash Input) Grey - Gris = (-Auxiliary output, Segundo canal auxiliar-) Orange - Naranja = (-Starter Kill, Corte -) Blue - Azul = (-Trigger Input, Disparo -) Violet - Violeta = (+Door Input, Puerta +) Green - Verde = (-Door Input, Puerta -) Relay Café/con lista Blanca: Este cable se puede programar (función #6), a sonar el claxon en conjunto al cable Café operar la Sirena, O TOMAR TODAS LA FUNCIONES DE LA SIRENA PARAQUE NO HAGA FALTA INSTALAR SIRENA. Brown/White : This wire can be configured (Programmable feature # 6), to honk the horn in addition to the Brown wire operating the siren, or take over all of the Siren’s functions SO THAT NO SIREN IS NECESSARY Optional Sensor Pin-Switch (+) Pin-Switch (-) Relay Shock Sensor Sensitivity FREEDOM 140 LA Dipswitches 1234 1234 1234 1234 1234 1234 1234 1234 1234 1234 + Battery