Transcript
Friends connecter Technology Corp ---- PV2a,PV2b Friends connector technology Corp provides economic, safe and convenient high-quality PV connector .
positive
negative
Main performance Parameter of PV Connecter Rated Voltage:
IEC1000V/UL600V（PV2a）； IEC1000V/UL1000V（PV2b）
Rated Current:
30A（4.0mm²、12AWG）
Typical contact resistance
0.25mΩ
Contact material
Copper ,tin plated
Insulation material
PC(front)，TPE(back)
Ambient Temperature:
-40℃ to 85℃
Protection Degree:
IP67
Line diameter
6.3mm(IEC1000V/UL600V) ; 7.4mm(IEC1000V/UL1000V)
Over voltage category
III
Pollution degree
2
Application Class:
Class II
Flame class
UL94,V-0
Manufacturing process and advantages: 1. strip the wire：
Strip length:8mm
cable
strip machine
cable
Set 8mm as the machine parameter , put the cable through the hole of the machine and press the starting button. Thus the machine starting to strip the cable automatic
2. punch the terminals
positive
Punching machine
negative
Insert the conductor of the cable into the hole of terminal, put them into the fixture of the punching machine, and then the starting button. The MAX. retention force between cable and terminal can reach 500N after punching. The terminal is manufactured with seamless molding technology and can Keep the low contact resistance within 0.25mohm.
3. two times of molding insert the cable which is punched into the mold and perform two times of molding
PC molding
TPE molding
The terminals are molded into the plastic part, which can keep the connectors in better concentricity less than 0.1 with the surround plastic and mating will become more reliable.
By molding process, cable is packed by long distance , like the D showed by the left figure, there will be bigger retention force between the cable and the plastic. D
In the rear end of the connector, it adopts TPE as the packing material, soft material let the cable has more buffering space to protect the cable during the bending of using.
Mating and Un-mating Letting the hook of the positive align to the hole of the negative, press the positive connector which is assembled one sealing O-ring into Negative connector by hand until the lock is locked
When unlocking , press the hook and then pull in two opposite direction by hand; If necessary, you can also use the unlock tool and keep them apart.
Unlock tool
