Transcript
Programmable headends
FRPRO10S Agile multicluster headends to filter both digital and analogue channels. 10 totally flexible and programmable clusters to filter each channel in UHF band. High selectivity allow to equalise channels with high signals differences. The set up could be done easily on the products through the built in keypad and the 16x2 Display. The USB port allow to load and save any configuration from and to each product of the family.
Main Specifications -
Colored die-cast housing to get a fashionable design and maximize the endurance of the products
-
Built in programmer for an easy and quick installation with Keypad and LCD display
-
Input matrix cluster selection completely flexible allow the association of the cluster filters to each UHF input
-
Auto- equalisation function to automatically adjust all the signals on the UHF inputs
-
Natural cooling convection
-
Selectivity of the clusters filter has been doubled 20dB@10MHz
-
Personal computer software to set all the parameter and/or to storage the installation set-up
FRPRO 10S Fracarro code Inputs Input 1 Input 2 Input 3 Input 4 Input 5 Input 6 Input 7 Outputs Output 1 Output 2 Output 3 INPUTS 1,2,3 Band UHF1, UHF2, UHF3 Selectable Channels Gain Dynamic input signal adjustment Noise Figure Input/Cluster selection
Cluster Bandwidth Cluster gain Adjustment
No. Band Band Band Band Band Band Band No. Band Band Band
272104 7 UHF1 UHF2 UHF3 III + DAB FM TV (AUX) SAT 3 TV TV (Test -25dB) TV +SAT
No. dB dB dB UHF1 UHF2 UHF3 MHz dB
E21 - E69 (470 - 862) 46 20 6 8,9,10 5,6,7,8,9,10 1,2,3,4,5,6,7,8,9,10 8-48 ( from 1 to 6ch) 20
Cluster Selectivity Maximum Input Level Maximum output level (IM3 -35dBc 2 tones) Dtt Signals Only Maximum output level (IM3 -54dBc 2 tones) INPUT 4 Band III +DAB Bandwidth Gain Gain Adjustment Noise Figure Maximum input level Maximum Output level (IM3 -35dBc 2 tones) DTT Signals only Maximum output level (IM3 -54dBc 2 tones) INPUT 5 Band FM Bandwidth Gain Gain Adjustment Noise Figure Maximum input level Maximum Output level (IM3 -50dBc 2 tones) INPUT 6 Band AUX Bandwidth Gain Gain adjustment Noise figure Maximum input level Maximum output level (IM3 -35dBc 2 tones) DTT signals only Maximum output level (IM3 -54dBc 2 tones) INPUT 7 Band SAT Bandwidth Gain Gain adjustment Slope adjustment Noise figure Maximum output level (IM3 -35dBc 2 tones) Remote feeding Main Features Master gain adjustment Configuration loading and saving Mains Power consumption Remote feeding UHF inputs Connectors Operating Temperature IP protection Test point Standard conformity
dBuV dBuV
20dB@10MHz 90 120
dBuV
116
MHz dB dB dB dBuV
174 - 300 46 20 6 90 120
dBuV dBuV
116
MHz dB dB dB dBuV dBuV
88 - 108 46 20 6 90 116
MHz dB dB dB dBuV
47 - 862 36 20 10 110 120
dBuV dBuV
116
MHz dB dB dB dB dBuV V/KHz
950 - 2150 35-42 sloped 20 20 8 120 14-18, 0-22KHz (200mA max.)
dB
20 USB 2.0 220-240,50-60 32 12/24, 250/100mA max. F female -5 to +50 IP20 -25 EN60065: 2004-06, EN50083-2: 2002-05
Vac/Hz W V °C dB
Fracarro
Item
Code 272104
FRPRO10S
Packing
Single
EANCode
8016978087044
Quantity
Dimensions
Net weight
Gross weight
Pcs
mm
Kg
Kg
1
400x300x70
4.00
4.15
Block Diagram Dynamic input signal adjustment
Cluster gain Adjustment Gain Adjustment
MASTER gain adjustment
Installation Example
B III
UHF 1
UHF 2
UHF 3
Vdc
USB LINK to load and save the configuration into a USB driver
To the distribution
Personal Computer Programmation Software
USB LINK to load and save the configuration into a USB driver
Portable Software for personal computer where the installation is not required the software could be execute directly from a USB Drive. All the parameter of the head end could be setted-up with the software. The configuration will be saved with a proprietary extension and could be loaded on all the product of the family.
