Preview only show first 10 pages with watermark. For full document please download

Fs18-20 - Lowell Manufacturing

   EMBED

Share

Transcript

Spec No. 1314 [REV. 07.19.17] Page 1/2 Model No. FS18-20 Flat-ship, Wall-mount Shelf • Ships fully assembled Construction & Features • 16-gauge steel shelf ships flat for convenient warehousing, then folds out to the service position. Front panel flanges insert into rear panel cutouts. • Keyhole mounting slots on 16” stud centers are slotted so the shelf can be installed with the equipment platform on top or bottom. • Two oblong cutouts (2.5” x 1.25”) for cable drop-down. Two oblong cutouts for cable drop-down. Mounts in either direction to meet application requirements. • Large cutout in rear allows placement over an existing wall fixture. • Side openings spaced for single gang, stud-mounted conduit boxes. • Cable lacing points and pre-punched mounting holes between center and side openings • Front retaining lip, flanged for strength. Large opening accommodates existing wall fixture. • Oblong cutouts (2.5x1.25”) for cable drop-down. • Black powder epoxy finish. • Load capacity 100 lbs. [45 kg] • Made in the USA with 100% certified US steel Folds flat for efficient shipping and warehousing. A&E Specifications The wall-mount shelf shall be Lowell Model No. FS18-20 which shall fold out to measure 18.22”W x 20”D x 8.19”H in the service position. It shall support up to 100 lbs. when properly mounted (hardware by others) using keyhole mounting slots on 16” centers. The rear shall have a large center opening to accommodate an existing wall fixture or wires and side openings spaced to accommodate single-gang stud-mounted conduit boxes. It shall also be pre-punched for mounting accessories or lacing cable. The equipment platform shall have a retaining lip and two oblong cutouts (2.5” x 1.25”) for cable drop-down. The unit shall feature a black powder epoxy finish. Model Number Model No. Description FS18-20 Lowell Flat Ship Wall Shelf Width Depth Height Load Capacity 18.22 in / 463 mm 20 in / 508 mm 8.19 in / 208 mm 100 lbs. / 45 kg One rack unit (RU or U) = 1.75 inches or 44.45 mm. Some measurements may have been rounded. Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification. ©2017 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | tel. 800.325.9660 | www.lowellmfg.com Spec No. 1314 18.218” [REV. 07.19.17] Page 2/2 20.000” 5.825” 8.235” Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification. ©2017 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | tel. 800.325.9660 | www.lowellmfg.com