Transcript
FULL-2WAY Remote Lighting Control System Features • Meets the need for denser circuit divisions in offices or in other
Full-2Way Eight-free Switch
applications to better manage lighting in smaller areas
WRT5518-8 Eight-free Wall Switch (8-Switch)(Infrared I/O)
• Allows from one to eight switches to be provided in a one-gang switch box
• Circuit description can be indicated on the switch • Provide one-, two-, three-, and four-switch operation in a single-
WRT5518-8 Eight-free Wall Switch (4-Switch)(Infrared I/O)
gang opening.
• LEDs on each button indicate load status during operation and
WRT5511-8, WRT5512-8, and WRT5513-8 not shown
Specifications of the Rated Signal Input Voltage
•
24VAC
Rated Signal Input Current WRT5518-8
14mA
WRT5514-8
9mA
WRT5513-8
8mA
WRT5512-8
7mA
WRT5511-8
6mA
Details •
Infrared I/O programming ports are located at the bottom of the switches. Each set of four switches has a programming port.
• • •
Dimensions
WRT5511-8
1
•
WRT5512-8
http://pewa.panasonic.com/full2way/
programming: • Red: Function activated (On). • Green: Function deactivated (Off). • Red and Green: A Timer function is active. Each Switch can be set to a user defined function and address using the infrared (IR) WRT9500K-8 Address Setting Unit or WRT9600-8 Address Setting and Programming Unit: • Individual: 0-1 through 63-4. An address is determined by the prefix (0 to 63) of the relay controller and the suffix (1 to 4) by the relay controller output. Dimmer On/Off can also be controlled when using WRT2040-894 Transmission Unit. • Group: G1 through G127. • Pattern: P1 through P72. • Dimmer: D1 through D16 (On/Off control only). • Programming is accomplished via wireless control without removal or disassembly of the switch from its mounting location. Two types of time delay functions may be programmed into any switch configured as an Individual, Group, or Dimmer: • Off Delay turns Off the circuit(s) one-half, one, or five minutes after the switch is deactivated. • On Timer keeps On the circuit(s) one-half, one, five, 60, or 120 minutes after the switch is activated. Switches communicate with other components using the signal lines. Multiple switches can control the same load, group or pattern. Each switch button may be individually labeled. Obtain power from the signal lines.
WRT5513-8
WRT5514-8
WRT5518-8
Panasonic Electric Works Corporation of America
