Fullhd Lcd Display Th-65sf2/55sf2/49sf2/43sf2

Transcript

RS232C/LAN command list MODEL：FullHD LCD Display TH-65SF2/55SF2/49SF2/43SF2 2017/6/14 Panasonic Corporation Control Command TYPE Transmission Command[:Parameters] Power ON Power OFF Power Status PON POF - Input Change IMS (:***) Inquiry Command Standby Avail - Transmission Command[:Parameters ] QPW QPW:* QMI QMI:*** Reply Command[:Parameters] Not avail B a s i c C o n t r o l Function Digital Link Input select for YFB Series IMS:DL1*** Avail Avail QMI:DL1 QMI:DL1*** Not avail Audio Volume Volume Up Volume Down Current Audio Volume Audio Mute Aspect Change Picture Mode AVL:*** AUU AUD AMT (:*) VMT (:*) DAM:**** VPC:MEN*** QVM Not avail QAS QPC:MEN QAV:*** QAM: * QVM: * QAS:**** QPC:MEN*** Not avail Backlight VPC:BLT*** Picture Adjustment VPC:PIC*** Black Level Brightness VPC:BLK*** QPC:BLT Color VPC:COL*** Tint VPC:TIN*** Sharpness VPC:SHP*** Enhance level VPC:SHE* Gamma Color Temperature VWB:GMM** VPC:TMP*** Red Gain VWB:RGN**** Green Gain VWB:GGN**** Blue Gain VWB:BGN**** Red Bias VWB:RBS**** Green Bias VWB:GBS**** Blue Bias VWB:BBS**** Not avail Not avail Not avail Not avail Not avail Not avail Not avail Not avail Not avail Not avail Not avail Power ON Power OFF 0 : Standby (Off) 1 : Power ON (On) HM1 : HDMI1 HM2 : HDMI2 DL1 : DIGITAL LINK (Valid for models with DIGITAL LINK only) DV1 : DVI-D PC1 : PC VD1 : VIDEO UD1 : USB MV1 : MEMORY VIEWER (Valid for models with DIGITAL LINK only) *YFB100/YFB200 Available when YFB100 is connected. HD1 : HDMI1 HD2 : HDMI2 PC1 : COMPUTER 1 PC2 : COMPUTER 2 SVD : S-VIDEO (* YFB100 only) VID : VIDEO Volume value Volume Up Volume Down Volume value Toggle (Audio mute Off) / (Audio mute On) Toggle (Video mute Off) / (Video mute On) FULL / NORMAL / ZOOM1 / ZOOM2 VIV : VIVID SIGNAGE NAT : NATURAL SIGNAGE STD : STANDARD SUV : SURVEILLANCE GRH : GRAPHIC DCM : DICOM 0 ~ 100 DEF:SET SHIPPING VALUE Available when Power save is Off. 0 ~ 100 DEF:SET SHIPPING VALUE 0 ~ 100 DEF:SET SHIPPING VALUE 0 ~ 100 DEF:SET SHIPPING VALUE 0 ~ 100 DEF:SET SHIPPING VALUE 0 ~ 100 DEF:SET SHIPPING VALUE 1: low 2: high 2.0 / 2.2 / 2.4 / 2.6 3200K ~ 10700K / NaTiVe / USER1 / USER2 Inquiry: HM1/HM2/DL1/DV1/PC1/VD1/UD1/MV1 HD1/HD2/PC1/PC2/SVD/VID (YFB100) HD1/ HD2/ PC1/ PC2 /VID (YFB200) 000 - 100 000 - 100 Control:(Toggle) Avail 0 / 1 Control:(Toggle) Avail 0 / 1 Not avail FULL / NORM / ZOOM / ZOM2 VIV / NAT / STD / SUV / GRH / DCM Avail QPC:BLT*** Avail QPC:PIC QPC:PIC*** QPC:BLK QPC:BLK*** QPC:COL QPC:COL*** QPC:TIN QPC:TIN*** QPC:SHP QPC:SHP*** QPC:SHE QPC:SHE* Not avail QWB:GMM QPC:TMP Not avail Not avail 0 / 1 Not avail Not avail Picture Contrast Explanation Avail Not avail Not avail Not avail QAV QAM Not avail Not avail Range and kind of parameter Call-back Control:(Toggle) HM1/HM2/DL1/DV1/PC1/VD1/UD1/MV1 Basic Control Video Mute P i c t u r e Standby QWB:GMM** QPC:TMP*** QWB:RGN QWB:RGN**** QWB:GGN QWB:GGN**** QWB:BGN QWB:BGN**** QWB:RBS QWB:RBS**** QWB:GBS QWB:GBS**** QWB:BBS QWB:BBS**** 1/8page 000 ~ 100 DEF 000 DEF 000 Avail DEF 000 Avail DEF 000 Not avail DEF 000 Avail DEF 1 / Not avail Avail ~ 100 ~ 100 ~ 100 ~ 100 ~ 100 2 Not avail 20 / 22 / 24 / 26 032 / 040 / 050 / 065 / 075 / 093 / 107 / NTV / Not avail U01 / U02 0000 ~ 0255 Not avail Not avail Not avail Not avail Not avail Not avail 0000 ~ 0255 0000 ~ 0255 -127 ~ 0000 ~ 0128 -127 ~ 0000 ~ 0128 -127 ~ 0000 ~ 0128 0 ~ 255 Available when 0 ~ 255 Available when 0 ~ 255 Available when -127 ~ 128 Available when -127 ~ 128 Available when -127 ~ 128 Available when Color Temperature is USER1 or USER2. Color Temperature is USER1 or USER2. Color Temperature is USER1 or USER2. Color Temperature is USER1 or USER2. Color Temperature is USER1 or USER2. Color Temperature is USER1 or USER2. Control Command TYPE Picture Adjustment Function Transmission Command[:Parameters] 6-segment color management 6-segment color management select color VWB:CMF* VWB:CML* **** **** **** 6-segment color management reset Dynamic Contrast Color Enhancement Refine enhancer Gradation smoother Memory delete Memory load Inquiry Command Transmission Standby Command[:Parameters ] Not avail QWB:CMF QWB:CML* Not avail VWB:CMR Not avail VPC:DCO** VPC:PAJ* VPC:SRC* VPC:GRS* VPF:DEL** VPF:LOD** Not Not Not Not Not Not Memory name change VPF:NAM** *...* Not avail Memory save VPF:SAV** *...* Not avail Memory state Output Select Balance AAC:OUT*** AAC:BAL*** Sound Mode AAC:MEN*** Bass AAC:BAS*** Treble AAC:TRE*** Surround AAC:SUR*** Horizontal Position Horizontal Size Vertical Position Vertical Size Clock Phase Dot Clock 1:1 Pixel Mode Overscan Position/Size Pos./Size Lump Setting Adjustment DGE:HPO**** DGE:HSZ**** DGE:VPO**** DGE:VSZ**** DGE:CLK*** DGE:DCL*** DGE:DBD* DGE:OVS* DGE:PSZ**** **** **** **** DGE:ASU * P i c t u r e avail avail avail avail avail avail Memory function S o u n d P o s i t i o n S E T U P Sound Adjustment Auto Setup Set up - Reply Command[:Parameters] QWB:CMF* QWB:CML* **** **** **** - - QPC:DCO QPC:PAJ QPC:SRC QPC:GRS - QPC:DCO** QPC:PAJ* QPC:SRC* QPC:GRS* - QPF:NAM** QPF:NAM** *...* - - QPF:STA Not avail QAC:OUT QAC:BAL Not avail Not avail 0 / 1 R / Y -511 -127 Not avail -127 QPF:STA****** QAC:OUT*** QAC:BAL*** QAC:MEN*** QAC:BAS*** QAC:TRE QAC:TRE*** QAC:SUR QAC:SUR*** QGE:HPO QGE:HSZ QGE:VPO QGE:VSZ QGE:CLK QGE:DCL QGE:DBD QGE:OVS QGE:PSZ QGE:HPO**** QGE:HSZ**** QGE:VPO**** QGE:VSZ**** QGE:CLK*** QGE:DCL*** QGE:DBD* QGE:OVS* QGE:PSZ**** **** **** **** QGE:ASU Not Not Not Not Not Not Not Not Not avail ** Not avail Not avail Not avail Not Not Not Not Not Not Not Not avail avail avail avail avail avail avail avail Not avail QGE:ASU Not avail Not avail Not avail Not avail avail avail avail avail avail avail avail avail Not avail Wobbling No activity power off OSD Language OSP:WOB* SSU:NAO* SSU:LNG*** Not avail QSP:WOB Not avail QSU:NAO QSU:LNG Not avail QSP:WOB* QSU:NAO* QSU:LNG*** Not avail Not avail Display Orientation Image rotation Menu Position SSU:DOR* SSU:IMR* SSU:OPS* Not avail QSU:DOR Not avail QSU:IMR QSU:OPS QSU:DOR* QSU:IMR* QSU:OPS* Not avail Not avail Menu Display Duration SSU:MDT*** Menu Transparency SSU:MTL*** 3D Y/C Filter SSG:YCS* Not avail Not avail 0 : off / 1 : on Red / Yellow / Green / Cyan / Blue / Magenta TINT : -511 ~ 511 SATURATION : -127 ~ 127 VALUE : -127 ~ 127 Available when 6-segment color management is on / B / M ～ 0511 ～ 0127 ～ 0127 Available when 6-segment color management is on QSU:MDT QSU:MDT*** QSU:MTL QSU:MTL*** QSG:YCS* 2/8page 0 ~ 10 OFF / ON OFF / Low / Mid / High 0 : off / 1 : on Memory No.1 - Memory No.6 Memory No.1 - Memory No.6 Not avail Not avail Not avail , E ^ w F _ x . G ` y / H a z 0 I b { 1 J c | 2 K d } 3 4 5 6 L M N O e f g h ~ , E ^ w F _ x . G ` y / H a z 0 I b { 1 J c | 2 K d } 3 4 5 6 L M N O e f g h ~ STD(AUT) / DYN / CLR -20 ~ 000 ~ +20(020) -20 ~ 000 ~ +20(020) MON / OFF -100 ~ 0000 ~ +100(0100) -100 ~ 0000 ~ +100(0100) -100 ~ 0000 ~ +100(0100) -100 ~ 0000 ~ +100(0100) 00 ~ 30 -5 ~ 00 ~ +5(05) 0 / 1 0 / 1 -100 ~ 0000 ~ +100(0100), -100 ~ 0000 ~ +100(0100), -100 ~ 0000 ~ +100(0100), -100 ~ 0000 ~ +100(0100) Control: 1 Inquiry: OK NG OF NW 0 / 1 0 / 1 ENG / DEU / FRA / ITL(ITA) / ESP / USA / CHA / JPN / RUS 0 / 1 0 / 1 1 / 2 / 3 Not avail Not avail QSG:YCS Explanation avail avail avail avail QAC:BAS Not avail / G / C ～ 0000 ～ 0000 ～ 0000 00 ~ 10 0 / 1 0 / 1 / 2 / 3 0 / 1 01 ~ 06 01 ~ 06 01 ~ 06 space ! " # $ % & ' ( ) * + Not avail 7 8 9 : ; < = > ? @ A B C D P Q R S T U V W X Y Z [ \ ] i j k l m n o p q r s t u v 01 ~ 06 space ! " # $ % & ' ( ) * + 7 8 9 : ; < = > ? @ A B C D P Q R S T U V W X Y Z [ \ ] i j k l m n o p q r s t u v Not avail - / 0 (Memory No.1 - No.06) Not avail SPO / LNO -20 ~ 000 ~ +20(020) Not avail Not Not Not Not QAC:MEN Not avail Range and kind of parameter Call-back Not avail Not avail Signal Standby 005 ~ 180 000 ~ 100 Not avail 0 / 1 Memory No.1 - Memory No.6 Memory name(Max 20 Parameters) Memory No.1 - Memory No.6 Memory name(Max 20 Parameters) Unused / Use SPEAKERS / AUDIO OUT -20 ~ 20 Available when Output Select is SPEAKERS. STANDARD / DYNAMIC / CLEAR Available when Output Select is SPEAKERS. -20 ~ 20 Available when Output Select is SPEAKERS. -20 ~ 20 Available when Output Select is SPEAKERS. ON / OFF Available when Output Select is SPEAKERS. H-Pos : -100 - 0000 - +100(0100) H-Size : -100 - 0000 - +100(0100) V-Pos : -100 - 0000 - +100(0100) V-Size : -100 - 0000 - +100(0100) 0 ~ 30 -5 ~ 5 OFF / ON OFF / ON H-Pos : -100 - 0000 - +100(0100) H-Size : -100 - 0000 - +100(0100) V-Pos : -100 - 0000 - +100(0100) V-Size : -100 - 0000 - +100(0100) Control: 1 : Execution start Inquiry: OK : result OK NG : result NG OF : Un-performing or when not effective NW : adjusting OFF / ON OFF / ON English (UK) /German / French / Italian / Spanish / English (US) / Chinese/Japanese /Russian Landscape / Portrait Off / 180 degrees 1:Left(Landscape) / Upper(Portrait) 2:Center 3:Right(Landscape) / Lower(Portrait) Timeout time of a menu display 5 - 180 seconds (5 second unit) Transmissivity of a menu 0 ~ 100% (10% unit) OFF / ON Control Command TYPE Function Transmission Command[:Parameters] Color System SSG:COS *** SSG:SNC *** SSG:DCR* SSG:XGA* Sync Signal Setting Cinema Reality 3:2 Pull Down XGA Mode Noise Reduction MPEG Noise Reduction Signal Range SSG:NRS*** SSG:MNR*** SSG:HRC*** Inquiry Command Transmission Reply Standby Command[:Parameters Command[:Parameters] ] QSG:COS QSG:COS Not avail *** QSG:SNC QSG:SNC Not avail *** QSG:DCR* Not avail QSG:DCR QSG:XGA QSG:XGA* Not avail HAV / GRN / HVS Not avail 0 / 1 1 / 2 / 3 / 4 Not avail Not avail Not avail QSG:NRS Not avail QSG:MNR QSG:HRC QSG:NRS*** QSG:MNR*** QSG:HRC*** Standby Not avail Range and kind of parameter Call-back Explanation NTS / PAL / SCM / 4NT / MPA / NPA / AUT NTSC / PAL / SECAM / NTSC4.43 / PAL-M / PAL-N / AUTO Available when PC is selected. Auto detection / Sync On Green / Hvsync OFF / ON 1:1024x768 2:1280x768 3:1366x768 4:Auto OFF / Auto / Low / Middle / High OFF / Low / Middle / High (HDMI input) Video / FULL / Auto (DVI-D input) Video / FULL / Auto (Other input) not avail YBR Signal / RGB Signal Available when PC is selected. YUV Signal / RGB Signal Available when HDMI1/HDMI2/DVI-D is selected. -16 ~ 16 (65inch only) OFF / ON OFF / ON 0 : stop 5 : operating 0:OFF 1:Interval 2:Time Designation 3:ON 4:Standby after Screensaver Periodic time Operating time Start time Finish time Time of operation(hour:minute) reset input name(Except PC) / reset input name(for PC) DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip) Not avail OFF / AUT / LOW / MID / HIG Not avail OFF / LOW / MID / HIG VID / FUL / AUT Signal Not avail Component/RGB-IN Select SSU:CMP*** YUV/RGB-IN Select SSU:DYR*** Input Level FRAME CREATION Not avail QSU:CMP QSU:CMP*** QSU:DYR QSU:DYR*** VWB:ILV*** VPC:FRC* Not avail QWB:ILV QPC:FRC Not avail QWB:ILV*** QPC:FRC* Not avail -16 ~ 000 ~ +16(016) 0 / 1 Not avail Dynamic backlight control Screensaver ON/OFF SSG:DBC* OSP:SCR* Not avail QSG:DBC QSP:SCR Not avail QSG:DBC* QSP:SCR* Not avail 0 / 1 0 / 5 Not avail Screensaver Mode SSC:MOD* QSC:MOD QSC:MOD* Not avail Not avail Not avail Not avail Not avail YBR / RGB YUV / RGB 0 / 1 / 2 / 3 / 4 Not avail Screensaver Interval Screensaver S E T U P Time Designation Screensaver Standby after Screensaver Set Label for Current Input SSC:INT**** **** SSC:TIM**** **** SSC:AOF**** SSU:ILA*** Not avail Not avail QSC:INT QSC:TIM Not avail QSC:AOF QSU:ILA QSC:INT**** **** QSC:TIM**** **** QSC:AOF**** QSU:ILA*** Not avail Set Label for EACH INPUT QSU:ILA+++ SSU:ILA+++*** Input label Not avail Power management settings Power Management Mode No Signal Power Off HDMI1 Power Management HDMI2 Power Management DIGITAL LINK Power Management SSU:ECS* SSU:AOF* SSU:D1H* SSU:D2H* SSU:D1L* Not Not Not Not DVI-D Power Management PC Power Management Power Save Extended standby mode HDMI-CEC control HDMI1 (change device) HDMI1 (get device name) SSU:D1V* SSU:DPM* SSU:ECO* SSU:ESM* SHC:FNC* SHC:HM1*** - Not Not Not Not Not Not QSU:ILA +++ *** HDMI2 (change device) HDMI2 (get device name) SHC:HM2*** - Not avail *** INP BD1 CTV 0 / 0 / 0 / 0 / 0 / Not Not Not Not QSU:D1V QSU:DPM QSU:ECO QSU:ESM QHC:FNC QHC:HM1 QSU:D1V* QSU:DPM* QSU:ECO* QSU:ESM* QHC:FNC* QHC:HM1*...* Not avail QHC:HM2 QHC:HM2*...* 0 / 1 0 / 1 0 / 1 0 / 1 0 / 1 NXT / space 7 8 9 Not avail P Q R i j k NXT / space 7 8 9 Not avail P Q R i j k avail avail avail avail avail avail - 3/8page avail avail avail avail Not avail Not Not Not Not Not avail avail avail avail avail - (reset input name) / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip) / DV1 / DV2 / DV3 / / BD2 / BD3 / / VCR / STB / SKP 1 1 1 1 1 QSU:ECS* QSU:AOF* QSU:D1H* QSU:D2H* QSU:D1L* Not avail INPUT HDMI1 / HDMI2 / DIGITAL LINK (Valid for models with DIGITAL LINK only) / DVI-D / PC / VIDEO +++ HM1/HM2/DL1/DV1/PC1/VD1 QSU:ECS QSU:AOF QSU:D1H QSU:D2H QSU:D1L avail avail avail avail HDMI-CEC settings 0000 ~ 2359, 0000 ~ 2359 0000 ~ 2359, Not avail 0000 ~ 2359 0000 ~ 2359 Not avail INP / PCN / DV1 / DV2 / DV3 / Not avail BD1 / BD2 / BD3 / CTV / VCR / STB / SKP Not avail PRE ! " : ; S T l m PRE ! " : ; S T l m # < U n $ = V o % > W p & ? X q ' @ Y r ( A Z s ) B [ t * C \ u + D ] v , E ^ w F _ x . G ` y / H a z 0 I b { 1 J c | 2 K d } 3 4 5 6 L M N O e f g h - # < U n $ = V o % > W p & ? X q ' @ Y r ( A Z s ) B [ t * C \ u + D ] v , E ^ w F _ x . G ` y / H a z 0 I b { 1 J c | 2 K d } 3 4 5 6 L M N O e f g h - CUSTOM / ON OFF / ON OFF / ON OFF / ON (Valid for models with DIGITAL LINK only) OFF / ON OFF / ON OFF / ON OFF / ON OFF / ON Disable / Enable Change to next device / Change to previous device Device name (Max 23 Parameters) Change to next device / Change to previous device Device name (Max 23 Parameters) Control Command TYPE Function Transmission Command[:Parameters] MENU code Display → Device Device → Display Display setting Image settings Image select ｜ Startup image settings SHC:MNC* SHC:PTS*** SHC:STP*** SCI:SIM* SCI:SCG* Display setting Image settings Image select ｜ No signal image settings SCI:NIM* SCI:NCG* HDMI-CEC settings Multi Display ON/OFF Multi Display Setup Detail Multi display settings Inquiry Command Standby Not Not Not Not avail avail avail avail Transmission Command[:Parameters ] QHC:MNC QHC:PTS QHC:STP QCI:SIM QCI:SCG Standby QHC:MNC* QHC:PTS*** QHC:STP*** QCI:SIM* QCI:SCG* Not Not Not Not Not avail QCI:NIM* QCI:NCG* Explanation 1 / OFF OFF 0 / 0 / 1 / 2 / 3 / 4 / 5 / 6 "Disable" / "Power off" / "Power on / off" "Disable" / "Power on" / "Power on / off" OFF /ON 0 : Default image 1 : User image 2 / 3 / 4 / 5 / 6 / POF / PWR / PON / PWR 1 1 Not avail 0 / 1 0 / 1 Not avail MDC:* MDC:EXP* ** ** *** *** *** TIM:PRG** * avail avail avail avail Range and kind of parameter Call-back Not avail Not avail QCI:NIM QCI:NCG Not avail QIM:PRG** QDC:EXP* ** ** *** *** *** QIM:PRG** * *** *** **** *** *** Not avail *** **** *** - 0 / 1 0 / 1, 01 ~ 10, 01 ~ 10, Not avail 000 ~ 100, 000 ~ 100, 001 ~ 100 01 ~ 20, 0 / 1, SUN / MON / TUE / WED / THU / FRI / SAT / EVD, PON / POF, Not avail 0000 ~ 2359, HM1/HM2/DL1/DV1/PC1/VD1/UD1/MV1 Present Day - - QIM:DAY QIM:DAY*** Present Time DAY TIME TIM:DAT**** ** ** ** ** - QIM:NOW QIM:DAT QIM:NOW0**** QIM:DAT**** ** ** ** ** Not avail 0000 ~ 2359 YYYY : 2017 ~ 2035 MM : 01 ~ 12 DD : 01 ~ 31 Not avail hh : 00 ~ 23 mm : 00 ~ 59 Date and time Not avail Not avail SUN / MON / TUE / WED / THU / FRI / SAT Synchronize display Parent or child setting Serial Control Network Control TIM:SDM* TIM:PCS* SCT:SEC*** SSU:NCT* Not avail QIM:SDM Not avail QIM:PCS Not avail QCT:SEC QSU:NCT Not avail QIM:SDM* QIM:PCS* QCT:SEC*** QSU:NCT* Not avail 0 / Not avail 0 / Not avail SE1 0 / Not avail Auto Display Name Display name SSU:ADN* SSU:LDN *...* Not avail QSU:ADN QSU:LDN QSU:ADN* QSU:LDN *...* Not avail 0 / 1 Not avail LAN Setup - Network Address LAN Setup - Port Number SSU:NET*** *** *** *** *** *** *** *** *** *** *** *** * SSU:LCP***** DIGITAL LINK Mode SSU:DLM** Network settings QSU:NET QSU:LCP QSU:NET*** *** *** *** *** *** *** *** *** *** *** *** * QSU:LCP***** QSU:DLM QSU:DLM** Not avail Not avail Not avail OFF /ON 0 : Default image 1 : User image Not avail Not avail QDC:EXP Set up timer S E T U P Reply Command[:Parameters] 4/8page 1 1 / DL1 1 space ! " # $ % & ' ( ) * + , - . Not avail 7 8 9 : ; < = > ? @ A B C D E F G P Q R S T U V W X Y Z [ \ ] ^ _ ` i j k l m n o p q r s t u v w x y 000 ~ 255 000 ~ 255 000 ~ 255 000 ~ 255 000 ~ 255 000 ~ 255 Not avail 000 ~ 255 000 ~ 255 000 ~ 255 000 ~ 255 000 ~ 255 000 ~ 255 0/1 01024~65535(04352，10000, 20000, Not avail excluded.) AT/DL/EN Not avail / H a z 0 I b { 1 J c | 2 K d } 3 4 5 6 L M N O e f g h - OFF/ ON OFF / ON, (Horizontal Scale) 1~10, (Vertical Scale) 1~10, (Bezel H Adjustment) 0~100, (Bezel V Adjustment) 0~100, (Location) (A1~J10) Program number : 1~20, Function : OFF / ON, (*A lower parameter is not given when the upper setup is "OFF." ) a day of the week : Sunday / Monday / Tuesday / Wednesday / Thursday / Friday / Saturday / Everyday Action type : PON / POF, Time : hour, minute, Start-up input : HDMI1 / HDMI2 / DIGITAL LINK (Valid for models with DIGITAL LINK only) / DVI-D / PC / VIDEO / USB / MEMORY VIEWER (a day of the week): Sunday / Monday / Tuesday / Wednesday / Thursday / Friday / Saturday Present time (hour:minute) (Year) (Month) (Day) (Hour) (Minute) format is "YYYYMMDDhhmm " Off / On Child / Parent Serial in / DIGITAL LINK OFF / ON Setting to Off while connected with LAN might disconnect the connection. OFF / ON DISPLAY NAME(Max 8 Parameters) IP address 1st BYTE 000 ~ 255 IP address 2nd BYTE 000 ~ 255 IP address 3rd BYTE 000 ~ 255 IP address 4th BYTE 000 ~ 255 SUB NET MASK 1st BYTE 000 ~ 255 SUB NET MASK 2nd BYTE 000 ~ 255 SUB NET MASK 1st BYTE 000 ~ 255 SUB NET MASK 2nd BYTE 000 ~ 255 Gateway address 1st BYTE 000 ~ 255 Gateway address 2nd BYTE 000 ~ 255 Gateway address 3rd BYTE 000 ~ 255 Gateway address 4th BYTE 000 ~ 255 DHCP OFF / DHCP ON 27250，41794 are Port Number (1024~4351,4353~9999,10001~19999, 20001~27249, 27251~41793, 41795~65535) (Valid for models with DIGITAL LINK only) Auto / DIGITAL LINK mode / Ethernet Control Command TYPE Function Transmission Command[:Parameters] DIGITAL LINK STATUS - Standby - Inquiry Command Transmission Reply Command[:Parameters Command[:Parameters] ] QSU:DLS QSU:DLS* * -** -** Standby Range and kind of parameter Call-back Explanation 0 / 0 / -00 -00 (Valid for models with DIGITAL LINK only) No connect / Digital Link / LPM / Ethernet No HDMI / HDMI(No HDCP) / HDMI(HDCP) Minimum Signal Quality Maximum Signal Quality 1 1 ~ ~ / 2 / 3 / 2 -99 -99 Not avail Network settings USB media player settings AMX D.D. Crestron ConnectedTM Extron XTP USB memory network settings Reset USB media player Schedule play function Video Playback Mode Resume play Slide show duration Play mode get Schedule play mode SSU:ADD* SSU:CRV* SSU:EXP* SSU:UNS* SSU:LRT SUS:UMP* SUS:SPF* SUS:VPB* SUS:RSP* SUS:SSD*** SUS:SPM* - Not Not Not Not Not Not Not Not Not Not Not avail avail avail avail avail avail avail avail avail avail avail SMS:MVF* SMS:VIE*** SMS:CON*** SMS:TYP*** SMS:ODR*** SMS:RPT*** SMS:SSD*** SMS:INF* SMS:GUI* OSP:KGR*** OSP:KFN* *** Not Not Not Not Not Not Not Not Not Not avail avail avail avail avail avail avail avail avail avail QSU:ADD QSU:CRV QSU:EXP QSU:UNS QUS:UMP QUS:SPF QUS:VPB QUS:RSP QUS:SSD QUS:SPM QUS:CMS QSU:ADD* QSU:CRV* QSU:EXP* QSU:UNS* QUS:UMP* QUS:SPF* QUS:VPB* QUS:RSP* QUS:SSD*** QUS:SPM* QUS:CMS* QMS:MVF QMS:VIE QMS:CON QMS:TYP QMS:ODR QMS:RPT QMS:SSD QMS:INF QMS:GUI QSP:KGR QSP:KFN* QMS:MVF* QMS:VIE*** QMS:CON*** QMS:TYP*** QMS:ODR*** QMS:RPT*** QMS:SSD*** QMS:INF* QMS:GUI* QSP:KGR*** QSP:KFN* *** - S E T U P Memory viewer function View Content select Sort type Memory viewer Sort order settings Play method Picture duration Auto display content info Auto display operation guide Function Group Function Button Settings Function button settings O p M t e i n o u n s OSP:KFG* OSP:OSD* OSP:IIN*** Initial VOL level OSP:IVL**** Maximum VOL level OSP:MVL**** Input lock OSP:INL*** Options Menu Not avail Not Not Not Not Not Not avail avail avail avail avail avail - 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 010 0 / 0 / 1 1 1 1 1 1 1 1 ~ 600 1 1 Not Not Not Not Not Not Not Not Not Not avail avail avail avail avail avail avail avail avail avail 0 / 1 THU / LIS STL / VID / AUD / ALL DAT / NAM ASD / DSD NON / ONE / ALL / RAN 010 ~ 600 0 / 1 0 / 1 INP / MEM / ACT 1 - 6 (ACTION & MENU) SIG / SSV / SUT / LNS / ECO / OSH / MLT / DZM / DID / HCO (INPUT) HM1/HM2/DL1/DV1/PC1/VD1/UD1/MV1 Not avail Not avail QSP:KFG Not avail QSP:OSD QSP:IIN Not avail Not avail avail avail avail avail Avail Not avail Function guide Settings On screen display Initial input Not Not Not Not QSP:KFG* QSP:OSD* QSP:IIN*** QSP:IVL QSP:IVL**** QSP:MVL QSP:MVL**** QSP:INL QSP:INL*** Not avail 5/8page Not avail 0 / 1 Not avail 0 / 1 OFF /HM1/HM2/DL1/DV1/PC1/VD1/UD1/MV1 Not avail 0 / 000 0 / Not avail 000 OFF Not avail Not avail 1, ~ 100 1, ~ 100 /HM1/HM2/DL1/DV1/PC1/VD1/UD1/MV1 (Example) QSU:DLS%1%2-%3%4-%5%6 %1: Link Status %2:HDMI Signal Status (correspond to HDMI Status) %3%4:Signal Quality MIN (00-99) %5%6:Signal Quality MAX (00-99) OFF / ON OFF / ON OFF / ON Prohibit / Permit Disable / Enable Disable / Enable Standard / Adjust OFF / ON 10 - 600 seconds (5 second unit) Individual play / Synchronize play Normal mode / Schedule play mode (standby　： Normal standby / Schedule wait standby) OFF / ON Thumbnail / List Picture / Video / Audio / All Date / Name Ascending / Descending None / Repeat one file / Repeat all files / Random 10 - 600 seconds (5 second unit) OFF / ON OFF / ON INPUT / MEMORY / ACTION & MENU(SHORTCUT) setup to FUNCTION KEY 1 - 6 (ACTION & MENU) SIG : Signal menu SSV : Screensaver menu SUT : Timer setup menu LNS : Network settings menu ECO : Power management settings menu OSH : AV Mute MLT : Multi display settings menu DZM : Digital zoom DID : Display ID & Display Name HCO : HDMI-CEC operation (INPUT) HM1 : HDMI1 HM2 : HDMI2 DL1 : DIGITAL LINK (Valid for models with DIGITAL LINK only) DV1 : DVI-D PC1 : PC VD1 : VIDEO UD1 : USB MV1 : MEMORY VIEWER OFF /ON OFF / ON OFF / HDMI1 / HDMI2 / DIGITAL LINK (Valid for models with DIGITAL LINK only) / DVI-D / PC / VIDEO / USB / MEMORY VIEWER function : OFF / ON, volume : 0~100 function : OFF / ON, volume : 0~100 OFF / HDMI1 / HDMI2 / DIGITAL LINK (Valid for models with DIGITAL LINK only) / DVI-D / PC / VIDEO / USB / MEMORY VIEWER Control Command TYPE Function Transmission Command[:Parameters] Button lock Controller User level PC auto setting Off-timer function Initial Startup OSP:BTL*** OSP:RCM* OSP:PAS* OSP:OFT* OSP:ISU*** Display ID Serial ID function Serial Response(Normal) Serial Response(ID all) Serial ID Setup (Serial ID Function and Display ID) Serial daisy chain position LAN Control Protocol SID:SID* SCT:RIN* SCT:RIA* SIF:* *** SCT:DCP*** OSP:LPN*** Power ON Screen Delay OSP:POD** Clock Display Power on message(No activity power off) Power on message(Power management) Input search 1st search input 2nd search input Detect digital input OSP:CLK* OSP:NAP* OSP:PMM* ISH:FNC*** ISH:PRI*** ISH:SCI*** ISH:DIN*** + Inquiry Command Standby Not Not Not Not avail avail avail avail Transmission Command[:Parameters ] QSP:BTL QSP:RCM QSP:PAS QSP:OFT QSP:ISU Reply Command[:Parameters] QSP:BTL*** QSP:RCM* QSP:PAS* QSP:OFT* QSP:ISU*** Not Not Not Not QID:DID*** QID:SID* QCT:RIN* QCT:RIA* QIF:* *** QCT:DCP*** QSP:LPN*** Not Not Not Not Not avail Options Menu Input search O p t i o n s Changing delay ISH:CGD** Input Change Mode Off SBI:OFF (NON NON *) SBI:QIC (*** *** *) Input Change Mode Quick M e n u Input Change Mode Normal Failover / Failback Changing mode SBI:NOR (*** *** *) Not avail Not avail Not avail Not avail Not Not Not Not Not Not avail avail avail avail avail avail QSP:POD QSP:POD** QSP:CLK QSP:NAP QSP:PMM QSH:FNC QSH:PRI QSH:SCI QSH:DIN*** QSP:CLK* QSP:NAP* QSP:PMM* QSH:FNC*** QSH:PRI*** QSH:SCI*** QSH:DIN***+ Not avail Not avail QSH:CGD QSH:CGD** QBI QBI:OFF NON NON * QBI:QIC *** *** * Not avail QBI Not avail QBI Not avail SBI:CHM* QBI:CHM QBI:NOR *** *** * - QBI:STS - Not avail Not avail Not avail Not avail Range and kind of parameter Call-back Explanation OFF / MEN / ALL 0 / 1 / 2 / 3 0 / 1 0 / 1 LST PON STB 000 ~ 100 0 / 1 0 / 1 0 / 1 0 / 1 000~100 TOP / DEF / END LP1 / LP2 OFF / MENU&ENTER / ON OFF / User1 / User2 / User3 OFF / ON OFF / ON LST : Last memory(return to a front state) PON : ON STB : STANDBY Display ID OFF / ON OFF / ON OFF / ON OFF / ON Display ID TOP / --- / END Procotol1 / Protocol2 AT / 00 ~ 30 AT : Auto 0~30 : 0~30 seconds OFF / ON OFF / ON OFF / ON OFF / ALL inputs / Custom / Input detection (none) / HDMI1 / HDMI2 / DVI-D / PC / VIDEO / USB (none) / HDMI1 / HDMI2 / DVI-D / PC / VIDEO / USB HDMI1 / HDMI2 / DIGITAL LINK (Valid for models with DIGITAL LINK only) / DVI-D / PC OFF / ON 00 : OFF 01～10 : changing time(sec) 0 / 1 0 / 1 0 / 1 OFF / ALL NON / HM1 NON / HM1 ***:HM1 / Not avail +:0 / 1 Not Not Not Not Not Not avail avail avail avail avail avail Not avail / PRI / HM2 / HM2 HM2 / / IDC / DV1 / PC1 / VD1 / UD1 / DV1 / PC1 / VD1 / UD1 DL1 / DV1 / PC1 00 / 01 / 02 / 03 / 04 / 05 / 06 / 07 / 08 / 09 / 10 Not avail 0 NON / HM1 / HM2 / DL1 / DV1 NON / HM1 / HM2 / DL1 / DV1 Not avail 0 / 1 Not avail NON/HM1/HM2/DL1/DV1/PC1/VD1/UD1 NON/HM1/HM2/DL1/DV1/PC1/VD1/UD1 0 / 1 2 / 1 Not avail - Backup Input Signal Status avail avail avail avail QBI:CHM* Not avail Backup Input Status avail avail avail avail Not avail QID:DID QID:SID QCT:RIN QCT:RIA QIF Not avail QCT:DCP QSP:LPN Not avail Not avail Standby QBI:SIG QBI:STS * *** * Not avail QBI:SIG * * * - Not avail 0: Disable (Auto switch back mode) Primary backup input : (None) / HDMI1 / HDMI2 / DIGITAL LINK (Valid for models with DIGITAL LINK only) / DVI-D Secondary backup input : (None) / HDMI1 / HDMI2 / DIGITAL LINK (Valid for models with DIGITAL LINK only) / DVI-D Auto switch back mode : 0: Disable / 1 : Enable Primary backup input : (None) / HDMI1 / HDMI2 / DIGITAL LINK (Valid for models with DIGITAL LINK only) / DVI-D / PC / VIDEO / USB Secondary backup input : (None) / HDMI1 / HDMI2 / DIGITAL LINK (Valid for models with DIGITAL LINK only) / DVI-D / PC / VIDEO / USB Auto switch back mode : 0: Disable / 1 : Enable High speed / Normal speed When [Quick] is selected, [Changing mode] can be adjusted. 0 / 1 HM1/HM2/DL1/DV1/PC1/VD1/UD1/MV1 0 / 1 / 2 0: inactive / 1: active (Status) Main Input : HDMI1 / HDMI2 / DIGITAL LINK (Valid for models with DIGITAL LINK only) / DVI-D / PC / VIDEO / USB / MEMORY VIEWER 0: Main Input / 1: Primary Backup input / 2: Secondary Backup input (Current Input Status) 0 / 1 0 / 1 0 / 1 0 : no signal / 1 : not no signal (Main input) 0 : no signal / 1 : not no signal (Primary backup input) 0 : no signal / 1 : not no signal (Secondary backup input) When Input change mode is not Off Manual Switch Back BIP:FSB Not avail - - Not avail 6/8page Enable when Input change mode is not Off and Auto switch back mode is Disable. Control Command TYPE Audio input select O p t i o n s M e n u Information Timing Function Transmission Command[:Parameters] for Current Input SAI: A+++ for EACH INPUT QAI:V*** Not avail Standby QAI: V*** A+++ Range and kind of parameter Call-back Not avail *** +++ HM1 / HM2 / DL1 / DV1 / PC1 / VD1 HM1 / HM2 / DL1 / DV1 / PC1 / VD1 / NAD Not avail *** +++ HM1 / HM2 / DL1 / DV1 / PC1 / VD1 HM1 / HM2 / DL1 / DV1 / PC1 / VD1 / NAD No Signal Warning SIT:NSW* Not avail QIT:NSW QIT:NSW* Not avail 0 / 1 No Signal Warning Timing SIT:SWT** Not avail QIT:SWT QIT:SWT** Not avail 01 ~ 60 Query status :No Signal Warning Timing - Not avail QST:NSW QST:NSW* Not avail 0 / 1 Message of No Signal Warning (Auto) While RS-232C controls: message sent on the display automatically. - Not avail - QST:NSW* Not avail 0 / 1 No Signal Error SIT:NSE* Not avail QIT:NSE QIT:NSE* Not avail 0 / 1 No Signal Error Timing SIT:SET** Not avail QIT:SET QIT:SET** Not avail 01 ~ 90 Query status :No Signal Error Timing - Not avail QST:NSE QST:NSE* Not avail 0 / 1 Message of No Signal Error Timing (Auto) While RS-232C controls: message sent on the display automatically. - Not avail - QST:NSE* Not avail 0 / 1 Temperature Warning SIT:TPW* Not avail QIT:TPW QIT:TPW* Not avail 0 / 1 Query status :Temperature warning - Not avail QST:TO QST:TO* Not avail 0 / 1 - Not avail - QST:TO* DDS DDS:DID AOC:* VDO DZM:* * * * ZOT:** UMP:NXT Not Not Not Not Message of Temperature warning(Auto) While RS-232C controls: message sent on the display automatically. Recall Display ID / Display name Audio Mute OSD Clear digital zoom O t h e r s SAI: V*** A+++ Inquiry Command Transmission Reply Standby Command[:Parameters Command[:Parameters] ] QAI QAI: V*** Not avail A+++ Off Timer USB media player Skip to the next playback file USB media player Skip to the previous playback file USB media player Playback again from top of the file Inquiry about Signal Status of input signal QDZ 0 / 1 0 / 1, 1 / 2 / 3 / 4, Not avail 1 / 2 / 3 / 4 / 5, 1 / 2 / 3 / 4 / 5 00 ~ 90 Not avail - - Not avail - - Not avail QST:SGS QST:SGS* Not avail - Not avail Not avail UMP:RPY Not avail - Not avail 0 / 1 QDZ:* * * * - Not avail UMP:PRE - avail avail avail avail - 0 / 1 / 2 Not avail Others Inquiry about Signal Frequency of input signal Inquiry about Signal Format of input signal Inquiry about detail of DIGITAL LINK status Auto Command Send Setting - RCM:* * - QFR - QSF QST:DLD - QFR:H***.** V***.** QSF:******************** QST:DLD * *** * -** -** -** -** -** -** - 7/8page 000.00 ~ 999.99, 000.00 ~ 999.99 Avail ( MAX 20 Characters) 0 / 1 / 2 / 3 000-225, <20 0 / 1 / 2 -00~-99 -00~-99 Not avail -00~-99 -00~-99 -00~-99 -00~-99 - Not avail Avail 0 / 1 0 / 1 (1~2 / Number of parameters is 1 to 2.) Explanation HDMI1 / HDMI2 / DIGITAL LINK / DVI-D / PC / VIDEO HDMI1 / HDMI2 / DIGITAL LINK / AV IN / AV IN / AV IN / NO AUDIO HDMI1 / HDMI2 / DIGITAL LINK / DVI-D / PC / VIDEO HDMI1 / HDMI2 / DIGITAL LINK / AV IN / AV IN / AV IN / NO AUDIO 0: Off /1:On On:display sends out the no signal warning.(QST:NSW*) 01 ~ 60 (minutes) 1: No Signal Warning: 0: No waring for this function. *Reply "0" when No Signal Warning is set "OFF". 1: No Signal Warning: 0: No waring for this function. 0: Off /1:On On:display sends out the no signal error..(QST:NSE*) 01 ~ 90 (minutes) 1: No Signal Error 0: No error for this function. *Reply "0" when No Signal Error is set "OFF". 1: No Signal Error 0: No error for this function. 0: Off /1:On On:display sends out the warning temperature..(QST:TO*) 1: "HIGH TEMPERATURE-MODE". *Please check the condition. 0: "NORMAL-MODE". 1: "HIGH TEMPERATURE-MODE". *Please check the condition. 0: "NORMAL-MODE". Recall Display ID / Display name MUTE OFF / MUTE ON OSD Clear OFF / ON, Enlargement factor, display position(Horizontal), display position(Vertical) 0~90(minutes) Play next content Available using USB media player Play previous content Available using USB media player Play top of the content Available using USB media player Signal Status information 0 : Valid signal 1 : No signal 2 : Unsupported signal Horizontal frequency Vertical frequency Displayed until the decimal point second place. Signal format information (Valid for models with DIGITAL LINK only) No connect / Digital Link / LPM / Ethernet (Est. Cable Length)(m) (*) No HDMI / HDMI(No HDCP) / HDMI(HDCP) ChannelA Signal Quality ChannelB Signal Quality ChannelC Signal Quality ChannelD Signal Quality Minimum Signal Quality Maximum Signal Quality (*)Est. Cable Length VS100RXFirmware :000>20(20mLAN) OFF / ON --- QSS (QSS command) OFF / ON --- QSS:STSERR (QSS:STSERR ) Control Command TYPE Software Version Main MCU - - Software Version Sub MCU - - Inquiry Command Transmission Reply Command[:Parameters Command[:Parameters] ] QMN QMN: ** * ** QID QID: **. ***.. * QRV QRV: *.**** SF2 QRV:STB QRV:STB**.** Software Version EEPROM - - QRV:EEP QRV:EEP**.** Software Version HDBaseT RX - - QRV:HBT Software Version FRC - - QRV:FRC Serial number - - QSN QRV:HBT **.**.**** QRV:FRC **** QSN:***** SOS History - - QSS Function Transmission Command[:Parameters] Inquiry about Model Name - Inquiry about Model O t h e r s - Standby - - Others Inquiry about SOS Status - - QSS:STS QSS:**. **. **. **. **. ** QSS:STS*** 8/8page Standby Range and kind of parameter Call-back Explanation 43 / 49 / 55 / 65 F 17 Inch size FHD model Product of 2017 Avail 43 / 49 / 55 / 65 SF2 J / U / E / W / C Avail *Example 1.0000 SF2 Avail *Example 01.00 Avail *Example 01.00 Avail *Example 30.90.000C Not avail *Example 0100 Avail (ASCII 9~15 / 9 to 15 figures of the ASCII characters) Avail 00~FF. 00~FF. 00~FF. 00~FF. 00~FF. 00~FF Avail Avail NON / ERR / EXT Inch size model market Version model Version Version Version (65inch only) Version (Alphanumeric character)(capital letter of the alphabet)(Blank)'-'(0x30-0x39,0x41-0x5a,0x20,0x2d) Number of times First time SOS classification 2nd SOS classification 3n time SOS classification 3n+1st SOS classification 3n+2nd SOS classification * In the 10th time, it is arranged as follows. First time SOS classification 2nd SOS classification 9th SOS classification 10th SOS classification 8th SOS classification NON : no SOS history ERR : SOS generating EXT : SOS history exists Protocol 通信規約 ■SERIAL terminal connection ■シリアル端子接続 Communication parameters Signal level RS-232C compliant Synchronization method Asynchronous Baudrate 9600 bps Parity None Character length 8 bits Stop bit 1 bit Flow control None 通信条件 信号レベル 同期方式 ボーレート パリティなし キャラクター長 ストップビット フロー制御 type of cable : ケーブル種 ： straight cable Basic format for control data: The transmission of control data starts with a STX signal, followed by the command, the parameters, and lastly an ETX signal in that order. If there are no parameters, the colon ":" does not need to be sent. STX C1 C2 C3 Start (02h) Command ３ characters ： P1 Colon P2 P3 ・ Parameter RS-232C準拠 調歩同期（非同期） 9600 bps なし 8 ビット 1 ビット なし ストレート 基本フォーマット： データは、「STX」、「コマンド」、「パラメーター」、「ETX」 の順に送信してください。 パラメーターを必要としないコマンドを送信する場合は、コロン（：）を付けないでください。 ETX ・ June,2017 Panasonic Corporation STX End (03h) スタート (02h) C1 C2 C3 コマンド３文字 （３ Byte) ： P1 コロン P2 P3 ・ ETX ・ パラメーター エンド (03h) （ コマンド例） ( Example ) 電源オンコマンド Power on Character STX P O N ETX キャラクタ STX P O N ETX Binary 02 50 4F 4E 03 バイナリ 02 50 4F 4E 03 ピクチャー +85設定 Picture+85 Character STX V P C ： P I C 0 8 5 ETX キャラクタ STX V P C ： P I C 0 8 5 ETX Binary 02 56 50 43 3A 50 49 43 30 38 35 03 バイナリ 02 56 50 43 3A 50 49 43 30 38 35 03 Notes: • If an incorrect command is sent, this unit will reply an “ER401” command to the computer. • If customer send multiple commands, be sure to wait for the response for the first command to come before sending the next command. ・The length of the Parameters are different for each command. ・With the power off(stand-by mode), this display responds to "PON"/"QPW" command only. ・Running the Read user image of Image settings, this unit will reply an “ER401” command to the computer. その他 ・間違ったコマンドを受信すると、“ER401”という応答コマンドを返信します。 ・複数コマンドで制御する場合は、送信側が本機の応答を受け取ってから、次のコマンドを送信することを想定しています。 ・When sending command with Display ID, set [Options] - [Serial ID function] to "on". ・If Display ID is "0", any ID number in command is acceptable to control. However, the inquiry command is inoperable. ・If serial ID in command is "000", it is acceptable regardless of Display ID of target display. However, the inquiry command is inoperable. ・If a command is sent with serial ID, a response will be sent to the computer only in the following cases. - When [display ID and serial ID] is not 0: the display ID needs to match the serial ID. ○シリアルID付で制御する場合は、「Options」メニューの「Serial ID function(シリアルID制御)」をオンに設定してください。 ○ディスプレイIDが0の場合、コマンドに付与するシリアルIDはどのような数字でも制御します。 　但し、問合せコマンドは動作不可です。 ○送信するコマンドのシリアルIDを"000"とすると、ディスプレイIDに関係なく制御します。 　但し、問合せコマンドは動作不可です。 ○ID付コマンドを送信した場合、以下の時のみコンピューターへの応答を返します。 　－ディスプレイID, シリアルID が0以外の場合:ディスプレイIDとシリアルID が一致した時 How to send to add ”Serial ID” (Serial Control Only) Serial ID Format AD94;RAD:;***** (ex.) Serial ID = 1 AD94;RAD:001;PON or RAD:;***** (ex.) Serial ID = 1 RAD:001;PON ID付コマンドフォーマット (シリアル制御 のみ) Serial ID Format AD94;RAD:;***** (例) Serial ID = 1の場合　AD94;RAD:001;PON または RAD:;***** (例) Serial ID = 1の場合　RAD:001;PON ・パラメータの長さはコマンドごとに異なります。 ・電源「スタンバイ」状態（リモコンで電源「切」）中は“PON”"QPW"コマンド以外の動作は保証されません。 ・イメージ設定のユーザーイメージ読込を実行中にコマンドを受信すると、“ER401”という応答コマンドを返信します。 1/3page Colon Semicolon STX A D Start (02h) 9 4 ; R A D : D1 Fixed 9 characters （9 Byte) D2 ; D3 C1 C2 C3 Command 3 characters （3 Byte) Serial ID Serial ID:000-100 コロン セミコロン Semicolon ： P1 P2 P3 ・ ・ Parameter Colon STX ETX A D 9 4 スタート (02h) End (03h) or ; R A D セミコロン : D1 固定9文字 （9 Byte) D2 ; D3 C1 C2 C3 コマンド3文字 （3 Byte) シリアル ID シリアルID:000-100 ： P1 P2 P3 パラメーター コロン ・ ・ ETX エンド (03h) または Colon STX Start (02h) R A D Fixed 4 characters : コロン Semicolon D1 D2 D3 Serial ID Serial ID:000-100 ; C1 C2 C3 Command 3 characters （3 Byte) ： Colon P1 P2 P3 ・ Parameter ・ STX ETX スタート (02h) End (03h) R A D 固定4文字 （4 Byte) : セミコロン D1 D2 D3 シリアル ID シリアルID:000-100 ; C1 C2 C3 コマンド3文字 （3 Byte) ： コロン P1 P2 P3 ・ ・ パラメーター ETX エンド (03h) ・"AD94;RAD:" or "RAD:" is fixed characters when sending command with ID. ・Serial ID is 3 characters and specified with Display ID which will be controlled. - If Display ID is 1, Serial ID is 001. - If Display ID is 15, Serial ID is 015. ・「AD94;RAD:」または「RAD:」は、シリアルID付きコマンドを送る場合に必要な固定文字列です。 ・シリアルIDには、制御したいディスプレイのディスプレイIDを3文字で指定します。 　－ディスプレイID が 1 の場合、シリアルIDは 001 になります。 　－ディスプレイID が 15 の場合、シリアルIDは 015 になります。 ■Control via LAN ■LAN経由制御 The communication differs whether [Options] - [LAN control protocol] is set to [Protocol 1] or [Protocol 2]. 「Options」メニューの「LAN control protocol」の設定が「Protocol1」か「Protocol2」かによって通信内容が異なります。 <「LAN control protocol」の設定が「Protocol1」の場合> ・When the WEB control administrator privileges password has been set (Protect mode) Connection method 　1. Obtain the display’s IP address and the port number (Default is 1024), and request connection to the display. 　　(The IP address and the port number can be obtained from menus. For details, see the manual. 　2. The display responds. ・WEB制御アドミニストレータ権限パスワード設定時（プロテクトモード） 接続方法 　１．ディスプレイのIP アドレスとポート番号を取得してディスプレイへ接続を要求してください。 　　　(IPアドレスとポート番号は、メニューから確認できます。詳細は取扱説明書を参照してください) 　２．ディスプレイからの応答があります。 　3. Hash the following data with the MD5 algorithm, and　generate a 32-byte hash value. 　　　　『zzzzzzzzyyyyy』 　　　　　　zzzzzzzz : 8-byte random number obtained in step 2 　　　　　　yyyyy : WEB control administrator privileges user password Command transmission method 　Transmit in the following command format. 　　　　Transmitted data 　３．MD5アルゴリズムを用いて、以下のデータから32バイトのハッシュ値を生成してください。 　　　　『zzzzzzzzyyyyy』 　　　　　　zzzzzzzz : 手順２で取得した8バイトの乱数 　　　　　　yyyyy : WEB 制御のアドミニストレータ権限ユーザーのパスワード コマンド送信方法 　以下のコマンド形式で送信してください。 　　　　送信データ 　　　　Received data 　　　　受信データ ・When the WEB control administrator privileges password has not been set (Non protect mode) Connection method 　1. Obtain the display’s IP address and the port number (Default is 1024), and request connection to the display. 　2. The display responds. ・WEB制御アドミニストレータ権限パスワード非設定時（非プロテクトモード） 接続方法 　１．ディスプレイのIP アドレスとポート番号を取得してディスプレイへ接続を要求してください。 　２．ディスプレイからの応答があります。 Command transmission method 　Transmit in the following command format. 　　　　Transmitted data コマンド送信方法 　以下のコマンド形式で送信してください。 　　　　送信データ 　　　　Received data 　　　　受信データ 2/3page <「LAN control protocol」の設定が「Protocol2」の場合> ・When the WEB control administrator privileges password has been set (Protect mode) Connection method 　1. Obtain the display’s IP address and the port number (Default is 1024), and request connection to the display. 　2. The display responds. ・WEB制御アドミニストレータ権限パスワード設定時（プロテクトモード） 接続方法 　１．ディスプレイのIP アドレスとポート番号を取得してディスプレイへ接続を要求してください。 　２．ディスプレイからの応答があります。 　3. Hash the following data with the MD5 algorithm, and　generate a 32-byte hash value. 　　　　『xxxxxx:yyyyy:zzzzzzzz』 　　　　　　xxxxxx : WEB control administrator privileges user name 　　　　　　yyyyy : Above administrator privileges user password 　　　　　　zzzzzzzz : 8-byte random number obtained in step 2 Command transmission method 　Transmit in the following command format. 　　　　Transmitted data 　３．MD5アルゴリズムを用いて、以下のデータから32バイトのハッシュ値を生成してください。 　　　　『xxxxxx:yyyyy:zzzzzzzz』 　　　　　　xxxxxx : WEB 制御のアドミニストレータ権限ユーザー名 　　　　　　yyyyy : 上記アドミニストレータ権限ユーザーのパスワード 　　　　　　zzzzzzzz : 手順２で取得した8バイトの乱数 コマンド送信方法 　以下のコマンド形式で送信してください。 　　　　送信データ 　　　　Received data 　　　　受信データ ・When the WEB control administrator privileges password has not been set (Non protect mode) Connection method 　1. Obtain the display's IP address and the port number (Default is 1024), and request connection to the display. 　2. The display responds. ・WEB制御アドミニストレータ権限パスワード非設定時（非プロテクトモード） 接続方法 　１．ディスプレイのIP アドレスとポート番号を取得してディスプレイへ接続を要求してください。 　２．ディスプレイからの応答があります。 Data part Space 『NTCONTROL』 ｢｣ (ASCII character string) 0x20 9bytes 1byte Mode ｢0｣ 0x30 1byte データ部 『NTCONTROL』 (ASCII文字列) 9バイト Last terminal symbol (CR) 0x0d 1byte 空白 ｢ ｣ 0x20 1バイト モード ｢0｣ 0x30 1バイト 終端記号 (CR) 0x0d 1バイト Command transmission method 　Transmit in the following command format. 　　　　Transmitted data コマンド送信方法 　以下のコマンド形式で送信してください。 　　　　送信データ 　　　　Received data 　　　　受信データ 　　(Note) 　　　　When setting to [Protocol 1], the response in the case that sent the inquiry command is omitted the first four characters of command. 　　　　　　　Example: 　　(お知らせ) 　　　　「Protocol2」で、問い合わせコマンドを送信した場合の応答は、 　　　　コマンドの先頭4文字を省略したものを返信します。 　　　　　　　例：　 For more details of the control via LAN, please obtain from the following web site. https://panasonic.net/cns/prodisplays/ LAN経由制御に関するより詳細な説明は、以下のサポートサイトより入手してください。 業務用ディスプレイ【まかせなサイト】　　　https://panasonic.biz/cns/prodisplays/ 3/3page