Transcript
AMULGB171S00 03/2017
Stabilimento / Plant Via Bicocca, 14/c 40026 Imola - Bo (Italy) tel. +39 0542 653441 fax +39 0542 653601 Sede legale ed amministrativa Headquarters Cefla s.c. Via Selice Provinciale, 23/a 40026 Imola - Bo (Italy) tel. +39 0542 653111 fax +39 0542 653344 www.anthos.com
Our policy of constant technological upgrading means that technical specifications may be subject to change without prior notice.
M U LT I M E D I A
M U LT I M E D I A
M.
F U L LY I N T E G R AT E D T E C H N O L O G Y
M U LT I M E D I A
“I ’ VE CH O SE N A NT H OS . E V E RYT HIN G’S M O R E C ON VEN IEN T AN D FASTER.”
Integration of the dental unit with a sophisticated, highly practical multimedia system provides a ‘ready-to-go’ solution that gives maximum diagnostic efficiency. High-tech devices for ‘live’ communication of information and digital X-ray diagnosis systems offer the dentist new levels of comfort, performance and speed.
M.
INCORPORATING THE LATEST GENERATION OF MULTIMEDIA DEVICES ON THE DENTAL UNIT IMMEDIATELY BOOSTS THE DENTIST’S DIAGNOSTIC CAPABILITIES AND SMOOTHLY INTEGRATES THEM INTO THE TREATMENT CENTRE. Classe L9, Classe L6, Classe A7 Plus and Classe A6 Plus can house the RXDC - HyperSphere technology X-ray unit, the Zen-X intraoral X-ray sensor, the LED monitor and the new HD dental camera. On Classe R7, Classe A5 and Classe A3 Plus it is possible to incorporate all the multimedia devices including the intraoral sensor, the only exception being the X-ray system. By way of a simple connection to an external PC – which, where the touch-screen monitor is installed, can be piloted by the dentist – all diagnostic images can be displayed and managed directly on the incorporated screen or on the display of the Full Touch panel (Classe L9 and Classe A7 Plus).
Minimum system requirements Operating system
Microsoft® Windows® 7 Professional 64 Microsoft® Windows® 7 Professional 32 Microsoft® Windows® 7 Home Basic 32
Ports
USB 2.0
Processor
Intel® Core™ i3-2120 (3.30 GHz, 3 MB cache, 2 core) or higher
Memory
4 GB 1333 MHz DDR3 SDRAM
Display
1366 x 768 a 32 bit TRUE COLOR
Graphics card
Processes up to the above-indicated resolution
THE ANTHOS MULTIMEDIA SYSTEM
22” LED monitor The new medical monitor available on the entire range of Anthos dental units is a benchmark in terms of working ergonomics and technology. Available in two versions, standard and multitouch, it is attached to the operating light column by way of a single or double articulation support arm and comes complete with PC connection leads. CE 93/42 certified, the 16:9 format screen is easily disinfected.
OFFERS DENTISTS THE VERY BEST IMAGE-BASED COMMUNICATION TECHNOLOGY. MEDICAL-GRADE 22” LED MONITOR AND HIGH DEFINITION VIDEO CAMERA WITH GLASS OPTICS AND 16:9 SENSOR. PERFECTLY MATCHED, BOTH DEVICES ARE INTEGRATED WITH THE ADVANCED DENTAL UNIT ELECTRONICS.
C-U2 high definition camera Right at the forefront of imaging technology, the C-U2, with glass optics and LED light diffuser, incorporates an HD 16:9 sensor that captures high definition images and displays them without distortion on the integrated 22” LED Monitor. Ergonomic and versatile The thinly shaped handpiece, with metal grip and a gap of just 8 mm between the centre of the optics and the end of the handpiece, allows for complete examination of the oral cavity and is particularly suitable for use in the distal zone on account of its partially retroflexed angle view. Focus Free The extensive depth of field (from 5 to 70 mm) ensures images that are always sharp without any need for manual adjustment.
Handpiece weight
65 grams
Handpiece length
205 mm
Distal section size
9.5 mm
Viewing angle
90° (diagonal)
Depth of Field
5 – 70 mm
Retroflex
95°
Optical system
7 + 2 high-purity glass lenses, F/8
Sensor
HDCMOS, Progressive Scan
Resolution
1280 x 720
Image format, video
16:9 native
Lighting
8 LEDs with adjustable intensity
Frame rate
30 frame/sec.
Dynamic-control capacitive key The C-U2 features an innovative touch-sensitive capacitive key that can be used to capture and save images that are unaffected by vibration. The same key also lets users scroll through saved images with ease. Diffused all-round backlighting indicates camera status at all times.
Consistency sensor The monitor is provided, as standard, with a display consistency sensor. Every time the monitor is switched on, the luminosity parameters are reset as if it were a firsttime switch-on. This device ensures constant maintenance of the very best image quality. Easy connection The USB lead can be used to connect the multitouch version monitor to the computer incorporated in the operating zone, replicating the screen; multitouch operation replaces mouse and keyboard, thus improving workplace hygiene. An HDMI lead connection is also available on both versions.
HD INTRAORAL CAMERA AND 22” LED MONITOR
Monitor technical specifications Flat screen
22” – 16/9 IPS LCD
Number of pixels (H x V)
1920 x 1080
Brightness
250 cd/m2
Contrast ratio
1000/1
Screen resolution
Full HD
Colours supported
16.7 millions of colours
Mount
VESA 75
Video input
VGA, DisplayPort, HDMI
Medical device certificate
CE 93-42
65
°
65
°
127°
127°
65
°
25°
C-U2
Full HD screen Perfectly suited to the new HD camera, the monitor has a resolution of 1920 x 1080 pixels. Image quality is always optimal whatever the diagnostic needs.
25°
Technical Specifications
Working ergonomics An effective dentist-patient communication tool, the multitouch version of the monitor, where supported externally by a PC, makes control of patient data even more immediate. To make it easier for dentists to use the touch screen, the double articulation support arm allows the monitor to be moved closer, thus aiding interaction via the screen and the display of digital images and X-rays. During surgery itself, the monitor can simply be retracted from the work zone. Thanks to IPS technology, which provides a broad viewing angle, images are easy to see simultaneously from any angle, thus making communication between medical staff and patient easier.
65
°
FEATURING UNPARALLELED TECHNOLOGY, RXDC - HYPERSPHERE TECHNOLOGY IS UNIQUE AMONG COMMERCIALLY AVAILABLE X-RAY UNITS. THE FULL-SWIVEL BALL JOINT IS NOTHING LESS THAN REVOLUTIONARY.
Wireless control The handheld digital control unit communicates with the X-ray tube head wirelessly, thus allowing in-surgery positioning of controls exactly as desired. Extremely easy to use, the control device provides a complete range of easy-to-understand exposure programmes. No more complicated programming or panels with a multitude of keys: just select the anatomical region of interest and the RXDC automatically calculates the correct exposure.
ROTATING FREELY AROUND THE SPHERE, THE TUBE HEAD CAN REACH ANY POSITION,
Precision diagnostics Specifically designed for digital X-ray imaging, the constant potential tube head, together with the 0.4 mm focal spot - among the smallest available - ensures images are always in-focus. Health and Safety RXDC, with its constant potential high frequency X-ray generator, significantly reduces radiation dosage compared to traditional X-ray units. Not only is the most harmful radiation almost completely eliminated, but the rectangular 30 cm collimator minimizes the exposed body surface and increases X-ray parallelism. This leads to better image quality and better safeguarding of patient health.
1%
AN AUTOMATIC TOUCH-SENSITIVE LOCK/RELEASE DEVICE ALLOWS EFFORTLESS SINGLE-HANDED
100%
Sequenced exposures RXDC allows uninterrupted use during multiple exposures (e.g. systematic examination) thanks to the Dynamic Duty-Cycle, based on real-time control of bulb temperature, shown on the large handheld display.
Touch-sensitive Two conveniently positioned touch-activated areas ensure easy head release and positioning. As soon as the user releases his/her grip, the head is locked in place with the utmost precision.
EVEN THE VERTICAL.
50%
Comfortable grip The ergonomically shaped sides of the tube head allow for quick, simple, effortless positioning, giving outstanding fingertip control.
REPOSITIONING OF THE HEAD BETWEEN ONE EXPOSURE AND THE NEXT.
Lightweight and compact The 30 cm X-ray collimator is almost fully embedded in the body of the tube head, making the head itself more compact and lighter than ever. Unique tube head design, together with stable aluminium arms, make this unit effortless to manoeuvre. An integrated self-balancing system reduces any risk of tube head vibration during image acquisition.
MyRay Multi-Mode The most appropriate combination of technical factors (kV, mA and exposure time) is calculated automatically according to the build of the patient and the anatomic region of interest.
RXDC - HYPERSPHERE TECHNOLOGY I N T E G R AT E D X - R AY U N I T Technical Specifications Generator
Constant potential, microprocessor-controlled
Working frequency
145-230 KHz (typically 175 KHz)
Focal spot
0.4 mm (IEC 336)
Anode current
6.7 mA
Voltage at X-ray tube
60, 63, 65 kV
Exposure time
0.010 – 1.000 seconds, R’10 and R’20 scale
Source-skin distance
30 and 20 cm with round cross-section, 30 cm rectangular
Irradiated field
35 x 45 mm rectangular, Ø 55 mm o Ø 60 mm round
Additional collimators
31 x 41 mm and 22 x 35 mm, for size 2 and size 1 sensors
Duty Cycle
Continuous operation with self-adjustment up to 1s/60s total
Stability
Automatic lock/release, with touch-sensitive activation (HyperSphere)
MAKING INTRAORAL IMAGING SIMPLE ZEN-X HAS BEEN DEVELOPED TO IMPROVE AND SIMPLIFY X-RAY DIAGNOSIS DIRECTLY ON THE DENTAL UNIT. INTEGRATED BOTH WITH THE ELECTRONICS AND PHYSICALLY WITH THE DENTIST’S MODULE, THE SENSOR IS ALWAYS COMFORTABLY WITHIN ARM’S REACH, THUS SPEEDING UP THE ACQUISITION PROCEDURE.
Thanks to its excellently ergonomic rounded shaping, Zen-X adapts to the anatomy of the oral cavity with ease, simplifying positioning of the sensor and ensuring maximum patient comfort. Precision diagnostics, always Zen-X uses a technologically advanced 3-layer sensor that captures high resolution images with minimum X-ray doses. Equipped with USB connection to provide greater versatility in the surgery. The sensor is IP67 certified.
Technical specifications
Size 1 – Standard
Size 2 – Large
External dimensions (mm)
38.9 x 24.9
41.9 x 30.4
Thickness (mm)
5.3
5.7
Pixel matrix
1500 x 1000
1700 x 1300
Pixel size (μm)
20
20
Max. spatial resolution (lp/mm)
25
25
Digital image bit depth
14 bit acquisition - 16,384 maximum levels of grey
Scintillator technology
CsI (Caesium Iodide) with micro-columnar structure
Direct exposure protection
FOP (Fibre Optic Plate)
Compatibility with X-ray generators
Any AC or DC technology X-ray generator with kV values in the 50 – 70 kV range and precision control of exposure times
Versatile sensor sizing Zen-X sensors come in two sizes, allowing you to choose the one that best suits your needs. The Zen-X control unit features a hot-swap connector so the dentist can work quickly and easily with both sensors, size 1 and 2. Specific alignment devices are designed for both sizes to facilitate intraoral positioning.
ZEN-X I N T E G R AT E D D I G I TA L X - R AY S E N S O R
Thin profile
Rounded contours Sealed, liquid-proof Protective outer casing
Specially shaped active area, with clipped front corners to optimise exterior shaping of the protective casing
Reinforced cable connection on back of sensor
