FXSVL02C-8V-1K ControlNetTM FLEX I/OTM
Servo valve interface module
Valve position demand output ±50mA, position feedback LVDT 4wiring 8V 1kHz *ControlNetTM is ControlNet International’s registered trademark. *FLEX I/OTM is Rockwell Automation’s registered trademark.
ITEM
SPECIFICATION
Position demand output
±50mA
Position feedback
LVDT 4wiring 8V 1kHz
Digital inputs
Photo coupler input DC24V / 5mA
×2
Auxiliary inputs (Without isolation)
1~5VDC Digital input
×4 ×5
Auxiliary outputs (Without isolation)
1~5VDC Digital output
×3 ×4
Serial interface (For maintenance)
EIA/RS-232C (PS/2) ×1
Self-diagnostic functions
Application abnormal Watchdog timer Clock monitor Connector omission Power supply voltage low Bus time-out
Indicator
LED×1
■ Outiline * Valve position demand output (Output range ±50mA) * Valve position feedback LVDT
LED×16
×1
Compatible terminal bases
(Control) (Standby) (Abnormal) (General purpose)
1794 - TB3/TB3S 1794 - TBN/TBNF
Dielectric strength
AC500V Between analog I/O terminal and FG(1min.) AC1500V Between digital I/O terminal and FG(1min.)
Environmental conditions
(Operating) Temperature: 0 ~ 55 ℃ Humidity: 35 ~ 95 % RH (No condensation) (Storage) Temperature: -10 ~ 70 ℃ Humidity: Less than 80 % RH (No condensation)
Power supply
DC 24V±10% / Less than 300mA DC 5V / Less than 80mA (FLEX BUS)
Shock/Vibration
15G / 2G @ 10~500Hz
Dimensions
110mmD×46mmH×92mmW
×1
* Auxiliary interface
3 Modes Green Yellow Red Yellow
* Module duplicated interface * FLEX I/OTM / ControlNetTM LAN compatible
This product incorporates technology which is licensed from Rockwell Automation Technologies, Inc. Rockwell Automation Technologies, Inc. has not technically approved, nor does it warrant or support this product. All warranty and support for this product and its application is provided solely by MITSUBISHI HITACHI POWER SYSTEMS, LTD.
CGS-N3306-E-01 (2014.03.31)
FXSVL02C-8V-1K ControlNetTM FLEX I/OTM
Servo valve interface module
Valve position demand output ±50mA, position feedback LVDT 4wiring 8V 1kHz *ControlNetTM is ControlNet International’s registered trademark. *FLEX I/OTM is Rockwell Automation’s registered trademark.
FXSVL02C-8V-1K block diagram 24VS
24V
DC5V/80mA
24P
DC24V Power supply
24N
3.3V
OK-LED
TB
DC DC
5V
24GND
3.3V
D/A
Valve position demand output
Z ② GND
FLEX bus interface (μP)
①
LVDT interface
①
A/D
LDVT
MPX 24VS
PC
Digital input
Z
・ ・ ・
Serial Communication
GND
・ ・ ・
3.3V
×2ch.
FLEX BUS
CPU (SH2) CN2 Auxiliary analog input ・ ・ ・
Serial Communication
FPGA
AGND
D/A ・ ・ ・
Mini DIN connector 6P
②
GND
・ ・
② AGND
1~5VDC ・ ・ ・
・ ・ ・
・ ・ ・
・ ・ ・
3.3V
・ ・ ・
3.3V
Output Enable2
・ ・ ・
×2ch.
Auxiliary digital input
・ ・ ・
・ ・ ・
VNEXT
×5ch.
DC24V Power supply
① ②
PC :Photo coupler MPX : Multiplexer μP :Micro processor
×2ch.
Module duplicated interface (output)
PC
Output Enable1
×4ch.
Module duplicated interface (input)
VPEXT
GND
×3ch.
Auxiliary digital output
PC GND
×4ch.
Auxiliary analog output
PC
(for maintenance)
1~5VDC・
DC/DC:DC/DC converter A/D :Analog/Digital converter D/A :Digital/Analog converter
Please read the attached instruction manual carefully before use. Reproduction of this manual’s contents in whole or in part without permission is prohibited. Please note the product introductions in this manual may be different from the real products due to product improvements etc.
CGS-N3306-E-01 (2014.03.31)