Eye/Face Washes
G1750BC
Eye/Face Wash, Wall Mounted, Stainless Steel Bowl and Cover
Application: Eye/face wash for wall mounting. Unit has
stainless steel cover to protect bowl from dust, dirt and other contaminants. Two large FS-Plus™ spray-type outlet heads deliver a flood of water for rinsing eyes and face.
Spray Head Assembly: Two FS-Plus™ spray heads. Each head has an internal flow control and filter to remove impurities from the water flow.
Valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals.
Bowl: 11-1/2" stainless steel bowl with cover. Cover is raised automatically when flag handle is activated. Cover closes when handle is returned to closed position.
Available Options
HS Auxiliary hand-held drench hose for rinsing eyes, face or body.
T Chrome plated brass tailpiece and trap with 1-1/2" IPS waste connection.
TP 1-1/2" OD chrome plated brass tailpiece. TMV G3600LF thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2014. Refer to “Tempering Units” section for complete technical and product selection information.
Mounting: Heavy duty cast aluminum wall bracket with powder coated finish.
Supply: 1/2" NPT female inlet. Waste: 1-1/4" NPT female outlet. Sign: ANSI-compliant identification sign. Quality Assurance: Unit is completely assembled and water tested prior to shipment.
Guardian Equipment 1140 N North Branch St Chicago, IL 60642
312 447 8100 telephone 312 447 8101 facsimile gesafety.com
Listed 8116. Units have been tested to and comply with ANSI Z358.1-2014 and the Uniform Plumbing Code.
ETL Listed 101496. Units have been tested to and comply with ANSI Z358.1-2014.
Eye/Face Washes
G1750BC
Eye/Face Wash, Wall Mounted, Stainless Steel Bowl and Cover
Ø11 3/4" (299mm) STAINLESS STEEL BOWL COVER
(2) FS-PLUS SPRAY HEADS
12 1/4" (311mm) 6 1/2" (165mm)
STAINLESS STEEL BOWL
6 3/8" (162mm)
2" (51mm)
SEE DETAIL A 5 3/8" (137mm)
5" (127mm)
POWDER COATED CAST ALUMINUM WALL BRACKET
DETAIL A MOUNTING BRACKET 3 1/4" (83mm) 3 1/4" (83mm)
POWDER COATED CAST ALUMINUM FLAG HANDLE
8" (203mm)
(3) Ø3/8" MOUNTING HOLES
NOTES: 1. EACH FS-PLUS SPRAY HEAD HAS A "FLIP-TOP" DUST COVER, INTERNAL FLOW CONTROL AND FILTER TO REMOVE IMPURITIES FROM THE WATER FLOW. 2. UNIT SHOULD BE INSTALLED SO SPRAY HEADS ARE 33"-45" ABOVE FINISHED FLOOR.
8" (203mm)
1-1/4" NPT FEMALE OUTLET
1/2" NPT FEMALE INLET 1/2" IPS CHROME PLATE BRASS BALL VALVE
Sign Included
this space for architect/engineer approval
Due to continuing product improvement, the information contained in this document is subject to change without notice. All dimensions are ± 1/4" (6mm). rev. 0115
Guardian Equipment 1140 N North Branch St Chicago, IL 60642
312 447 8100 telephone 312 447 8101 facsimile gesafety.com
Listed 8116. Units have been tested to and comply with ANSI Z358.1-2014 and the Uniform Plumbing Code.
ETL Listed 101496. Units have been tested to and comply with ANSI Z358.1-2014.