Gallet F1 Xf

Transcript

Gallet F1 XF Communication Accessories – Technical specifications Rev 2 – June 2014 Flexible Microphone Headset, Gallet F1 XF helmet Specification Description Overview Communication headset for integration in Gallet F1 XF fire helmet  One or two loudspeakers, in plastic housing with mounting clips.  Flexible microphone, adjustable in length (80 mm) to optimize position in front of the mouth or in front of the speech diaphragm (BA face piece)  Downlead Cable with anti-tearing, LEMO connecting plug (green cover). Interoperability Operates with an MSA Push-to-Talk (PTT) module enabling connection to the PMR radio. Connection through an anti-tearing LEMO plug with color codification.  PTT module with Yellow connector: non ATEX system  PTT module with Green connector: ATEX system (for use with approved ATEX radios only)       Microphone: noise cancelling Electret, 100Hz-10kHz, distortion < 3% Loudspeaker: 32 Ω, 20 Hz – 3 kHz, max power 100 mW Amplifier: adjustable gain (0 to 26 dB), 300 Hz – 3 kHz Nominal output 50 mV RMS, Harmonic distortion 5% Down lead Cable: Fire retardant, shielded cable Housing: Polyamide (PA6), Fire resistant (V0) Operation Temperature: -20°C to +65°C, humidity < 98% Weight   Standard version (1 speaker): 100 ± 10g Premium version (2 speakers): 125 ± 10g Approval     EMC performance: ESD/EMI: 10 V/m Ingress Protection testing: IP56 (tested inside the helmet) ATEX (when used with an ATEX certified PTT module) ATEX level: II 2G Ex ia IIC T4 Ordering Information  Technical specifications Part number (when ordered separately from the helmet)  GA010002B3X – Headset, Gallet F1XF, Flexible Microphone 1 Speaker GA010002B3AX – Headset, Gallet F1XF, Flexible Microphone 2 Speakers Headset, 1 speaker Headset, 2 speakers Microphone standby position Headset, in-use position Headset, standby position Connecting plug, headset to PTT Gallet F1 XF Communication Accessories Non contractual – Subject to change without notice www.MSAsafety.com Gallet F1 XF Communication Accessories – Technical specifications Rev 2 – June 2014 Push-to-Talk Module Specification Description Overview Push-to-Talk Module (PTT) including:  Housing with large size, easy to handle push button  Downlead cable to the PMR radio with connection plug  Headset connection cable with anti-tearing LEMO plug  Belt / Strap attachment through clip of pincer Interoperability Operates with an MSA Headset, in particular helmet mounted headsets for Gallet F1 XF fire helmets.  PTT with Yellow connector: for flexible microphone headsets  PTT with Green connector: for flexible microphone headset, ATEX (for use with ATEX radios only)  PTT with Red connector: for Bone conductive microphone headsets  PTT with Blue connector: for Bone conductive microphone headset, ATEX (for use with ATEX radios only) Technical specifications     Weight  Pincer version: approx. 200 g  Clip Version: approx. 160 g Note: Weight may vary depending on radio plug and cable type Approval     Ordering Information Ordering information depends on type of headset and type of radio. Please consult MSA for exact configuration. Amplifier: Adjustable gain (0-26 dB), bandwidth 300Hz-3kHz Nominal output: 50mV RMS, harmonic distortion 5% Housing Material: High Temperature Thermoplastic (PA) Operation Temperature: -20°C to +65°C, humidity < 98% EMC performance: ESD/EMI: 10 V/m On selected models, compliance to ATEX directive ATEX (when used with an ATEX certified PTT module, blue or green plug) ATEX level: II 2G Ex ia IIC T4 PTT Module, with headset plug (left) and radio plug (right) – Shown with Motorola GP 3x0 series connector PTT module, pincer version (also available with belt clip) Gallet F1 XF Communication Accessories Non contractual – Subject to change without notice Headset connecting plug Color varies with configuration www.MSAsafety.com Radio connecting plug Ex: Motorola GP3x0 series Gallet F1 XF Communication Accessories – Technical specifications Rev 2 – June 2014 Hearing Protection with flexible Microphone Specification Description Overview Active Hearing Protection headset with built-in communication capabilities, including:  Two ear muffs with padding and noise attenuation foam  Ear cup height adjustment system for optimal wearing position  Flexible microphone attached to the left muff  Downlead Cable with anti-tearing, LEMO connecting plug (green). Interoperability Operates with an MSA Push-to-Talk (PTT) module enabling connection to the PMR radio. Connection through LEMO plug with color codification.  PTT module with Yellow connector: non ATEX system  PTT module with Green connector: ATEX system (for use with approved ATEX radios only)  Technical specifications       Microphone: Noise cancelling electret, 100Hz-10kHz, sensitivity -61 dB (nominal) at 50% humidity Loudspeaker: 32 Ω, 100Hz-20kHz, max power 100mW Material: Cup: PC/ABS, Cushion: Synthetic leather Down lead Cable: Fire retardant, shielded cable Battery: 2xAAA batteries, Duracell, Varta, Energizer (ATEX versions), Surrounding sound amplifiers: Omnidirectional, sensitivity -38±2dB, Max input 110dB S.P.L Operation Temperature: -20°C to +65°C, humidity < 98% Weight 390 g ± 10g (including batteries) Approval      Ordering Information EMC performance: ESD/EMI: 10 V/m Fully watertight – equivalent to IP67 ATEX (when used with an ATEX certified PTT module) ATEX level: II 2G Ex ia IIC T4 SNR value : 26 dB / H=26 / M=23 / L=18 Part number (when ordered separately from the helmet)  GA010002D3X – Headset, Gallet F1XF, Hearing Protection, boom microphone Headset general view Headset mounted inside the helmet Connecting plug, headset to PTT Ambient sound microphone Battery compartment Button (on/off and Volume +/-) Gallet F1 XF Communication Accessories Non contractual – Subject to change without notice www.MSAsafety.com Gallet F1 XF Communication Accessories – Technical specifications Rev 2 – June 2014 Hearing Protection with level dependant function Specification Overview Technical specifications Description Active circum aural headset enabling the user to be in contact with the surroundings but still protect the hearing, including:  Two ear muffs with padding and noise attenuation foam  Built-in, level dependent function with amplification volume adjustment  Ear cup height adjustment system for optimal wearing position     Loudspeaker: 32Ω, 100Hz-20kHz, max power 100mW Material: Cup: PC/ABS, Cushion: Synthetic leather Battery: 2xAAA batteries, Duracell, Varta, Energizer (ATEX versions), Surrounding sound amplifiers: Omnidirectional, sensitivity -38±2dB, Max input 110dB S.P.L Weight 330 g ± 10g (including batteries) Approval      Ordering Information Part number (when ordered separately from the helmet)  GA010002E3X – Headset, Gallet F1XF, Hearing Protection Headset general view Ambient sound microphone Gallet F1 XF Communication Accessories Non contractual – Subject to change without notice EMC performance: ESD/EMI: 10 V/m Fully watertight – equivalent to IP67 ATEX Approval according to directive ATEX level: II 2G Ex ia IIC T4 SNR value : 26 dB / H=26 / M=23 / L=18 Headset mounted in helmet Battery compartment www.MSAsafety.com Button (on/off and Volume +/-)