Garde Tiller Garden Tiller Garde Tiller

Transcript

3) ALWAYS wear protective clothing when operating engine is running. 12) DO the rotary hoe. This includes, but is not limited to; NOT overspeed the PROCEDURE: engine or alter the governor THE ENGINE: TRENCHING 3) STARTING 5) position the log / wood to split with the grain of the notUSER hurry the ALWAYS job. Proceed slowly and allow OPERATING INSTRUCTIONS FOR HLS safety glasses, loose fitting gloves,9) steel Do capped 9) Do hurry Proceed slowly allow Excessive speed is dangerous and will and 9)settings. Donot not hurry thejob. job. Proceed slowly and allow Make sure thatthe there is sufficient clearance from OPERATION SAFETY INSTRUCTIONS FOR RH918 USERS OPERATION log / wood. a. Move theand fuelhearing valve Familiarise yourself with the hydraulic log splitter and its boots protection. NEVER wear loose enginejob. life.time the do ground the machine time toshorten do the When ground themachine machine time dothe the job.When When ground structures, objects ortoto people in job. front of the machine lever to ON fitting clothing or jewellery when operating the controls. 13) is When splitting wood always operate theinhydraulic logsplitter NEVER operate the rotary hoe an extremely hard, reduce engine speed. 1) Remove the garden tiller a. Put Wheel Drive Lever in neutral. 8) is extremely hard, reduce engine speed. ALWAYS make certain the Tyne Control Lever 1)safety Remove the garden tiller position. rotary hoe. Keep all clothing away from moving is extremely hard, reduce engine speed. Wear glasses, or helmet visor combination, loose in front of theenclosed axle onarea. the hydraulic valvecontains side of theismain Engine exhaust from its trailer/carrier. Use caution. b. Be sure both hubs are engaged (turn hub lock set at neutral while loading and unloading thehandleas from its trailer/carrier. Use caution. WARNING! IN CASEOF OF DIFFICULTY, parts. could become and caught in the machine, fitting hearing protection beam only. Use caution whilst standing in this position b.1)gloves, carbon monoxide, odourless and To start aItems cold WARNING! –– IN CASE DIFFICULTY, Remove the garden tiller safety work boots. aution. WARNING! –an IN CASE OF DIFFICULTY, clockwise). (See Free Wheel Hub Feature) WARNING! – IN CASE OF DIFFICULTY, rotary hoe, or moving to and away from working area.exit resulting in injury. RELEASE THE TYNE ENGAGEMENT PPE Protection certain logs / tasteless wood can spring back under tension, and poison. engine, move 1) Remove thethe garden with tiller 2) Familiarize yourself DISENGAGE THE SAFETY CLUTCH WARNING! CASE OF DIFFICULTY, 2)(Personal Familiarize yourself withthe themachine machine andits its c. – IN Have engine at full throttle (forward). from its trailer/carrier/ute. Use caution.and DISENGAGE THE SAFETY CLUTCH RELEASE THE TYNE ENGAGEMENT 4)choke Equipment) is mandatory ALWAYS use the rotary 9) from the hydraulic logsplitter with force. CONTROL LEVER. ALL TILLING ACTION NEVER run the machine in reverse while the tynes lever or choke from itsDO trailer/carrier/ute. Useoperate caution. controls. 1) CONTROL LEVER. ALL ACTION NOT allow any person the d. Hold controls. Digging Chain Control Lever in TILLING On machine and its CONTROL LEVER. ALL TILLING ACTION CONTROL LEVER. ALL TILLING ACTION DISENGAGE THE SAFETY CLUTCH 14) STOP the engine and disconnect theposition. hoe in a this well lighted area. before rod operating machine. (applicable are Always move the tyneuntil control lever toin STOPS. Turn the engine "STOP" switch Engage therotating. splitting head control lever it comes 2) Familiarize with machine rotary yourself hoe without firstthe reading and and its STOPS. Press the engine "STOP" button e. Squeeze the safety Clutch Lever/Operator Presence Control. STOPS. Press the engine "STOP" button spark plug lead(s) and allow engine to STOPS. Turn the engine "STOP" switch 3) Ensure the safety clutch control lever is in the to the “OFF” before reversing the wheels. 2) Familiarize yourself with the machine and its 3)5)types) Ensure the safety clutch control lever is in the to off located on the engine. ALWAYS operate the rotary CONTROL LEVER. ALL TILLING ACTION ALWAYS make certain that all control levers are in the contact with the log / wood. Slowly ease the splitting head controls. understanding the safety instructions and f. Slowly lower the digging boom until the desired trench located on the engine. cool before inspecting or performing located on the engine. to offDo located on theunit engine. CLOSED disengaged safety clutch hoe The on level ground only. controls. NEVER operate the without the safety disengaged position. The safety clutch disengage position priorposition. to starting the engine. into10) the log /iswood. not to force the split. Once the depth achieved using the Digging Boom Control Lever. operating instructions. maintenance on try the rotary hoe. STOPS. Press the engine "STOP" button position. Police the area before rotary control lever is located on the left handle bar. trolDisconnect lever is in the 3)KNOW Adjust wheels if required, using the handle wheel guards in place and in working order. Keep log / wood is secured between the splitting head and head control lever is located on the left handle bar. g. Put Wheel Drive Control Lever in reverse. Start at low speed. THE CONTROLS AND HOW TO STOP 15) the wheels retaining pin from the headstock and lower 10) Stop Release the safety clutch control REFUELLING 10) StopEngine: Engine: Release the safety clutch control hoeing. foreign objects inlever the digging 3) To Adjust ifany required, using the handle wheel restart aRemove located onstock the engine. The disengaged position ofof the isisdown. 9) Stop Engine: Release the tyne engagement remove your hand from the top centre of theislog / wood adjustment lever. theoff unit well maintained and in good The disengaged position theEMERGENCY. lever down. h. Adjust the wheel speed until a workable speed reached the lifting table onto the lifting frame. * Shut the engine. DO NOT REFUEL THE ROTARY HOE QUICKLY IN AN e safety clutch lever. Move throttle to Slow position. Set engine Stop Engine: Release the tyne engagement area - bricks,lever. rocks, wire and sticks. Locate and mark lever. Move throttle to Slow position. Setforengine adjustment warm engine, control lever. Move throttle to Slow position. and9)proceed to split. NEVER PLACE YOUR HANDS OR working order. Use aswitch very slow speed for trenching and adjust soil AN ENGINE WHILE OPERATING! DO NOT allow by-standers near the hydraulic Remove the shaft locking pin located anythe sprinkler heads, water pipes, gas lines, stop to Stop or Off position. DO NOT move control lever. Move throttle to Slow position. leave choke lever choke rod inusing the OPEN position. 4) Remove the shaftor pin located behind Adjust depth shoe iflocking required, thebehind depth 2) 4) e left handle bar. stop switch to Stop or Off position. DO NOT move 4) NEVER allow children to operate the rotary hoe. FINGERS AT THE END OF THE LOG / WOOD. 11) Set engine stop switch to Stop or Off position. DO NOT leave the machine unattended while the conditions as necessary. If objects such as rocks or roots * Allow engine to cool. Minimum 5 minutes logsplitter while in operation. OPERATING THIS electrical and telephone cables orhole any other hazard Adjust depth shoe iflever. required, using the depth 4) Move the wheel axle. Store pin inin provided on 10) Stop Engine: Release the safety clutch control choke control totoswitch Choke Set stop to Stop or Off position. the wheel axle. Store pin hole provided on control adjustment choke control Choke thebelow jam inengine the chain, release the Safety Clutch Lever/Operator engine running. * is USE UNLEADED FUEL ONLY. DO NOT move choke 3)c. ALWAYS he lever is down. MACHINE IS A SINGLE PERSON OPERATION. wear protective clothing when operating SPLIT WOOD IN THE DIRECTION OF THE GRAIN ONLY. either or above ground. control adjustment lever. left hand side ofofhandle bar. or Start position totostop DO NOT move choke left side handle bar. or Start position stop throttle lever Presence Control, then reverse the chain to dislodge the clean,should fresh unleaded lever. Move to Slow position. Set engine control to Choke orthe Start Itrotary is hand the responsibility of the operator to keep 12) the hoe. This includes, but is notcontrol limited to; Log / Wood toUse be split be cut as squarely as possible. DO NOT overspeed engine orfuel. alter the governor 5)6) Ensure the tyne engagement lever is in throttle engine. Backfire or DO NOT allow other persons near the away from the control to Choke or Start * Do not mix oil with unleaded fuel. debris. If necessary move the trencher forward a few engine. Backfire or bystanders and animals a minimum of 6 metres (18 feet) 5) Ensure the tyne engagement control lever is in position to stop engine. safety glasses, loose fitting gloves, steel capped 5) The wheel axle will now pivot. Lift up on the settings. Excessive speed is dangerous and will n located behind stop switch or Off position. DO NOT move the neutral position. The tyne engagement 5) MIN The wheel axle pivot. Lift upkeep on the to Stop NEVER attempt to load thearea hydraulic logspace splitter when the rotary hoe.will It isnow up to the operator to * Doto not over-fill fuel tank. Allow position, engine damage may inches and trench the again. position engine. engine damage may away boots from the hydraulic logwheel splitter while in operation. the neutral position. The tyne engagement and hearing NEVER wear loose shorten engine life. Backfire orstop engine handle allow axle to pivot. ram is in motion. control isprotection. located on the hand of the handle to allow wheel axle tochoke pivot. For bystanders and animals a left minimum of side 6 For for fuel expansion. about 1/3 lever ofto the hole provided on control WARNING - KEEP HANDS AND FEET CLEAR Backfire or engine occur.* Do fitting clothing or jewellery when operating the 13) occur. control isofflocated the left hand side of the to Choke damage may occur. transport, keep the wheel axle forward. When Open fuellever shut valve, ifon engine is equipped. not smoke. metres (20’) away from the machine while in NEVER operate rotary hoe in an log transport, keep the wheel axle forward. When way toward the machine below handle bar. The neutral position OF TRENCHING CHAIN AND OTHER MOVING NEVER straddle or climbthe over the hydraulic damage may occur. or Start position to stop rotary hoe. Keep all clothing away from moving machine below handle bar. The neutral position Move choke control to CHOKE or START position. * Allow no naked flameEngine or hot material in refuelling cultivating, keep the wheel axle rearward for operation. PARTS ATarea. ALL TIMES! MAX position. enclosed exhaust containsarea. cultivating, keep the wheel axle rearward for of the lever is achieved by simply releasing the splitter while in use. 1) parts. Items could caught in the machine, only approved fuel containers and funnels. Note: Choke must becontrol. fully closed. Move throttle the Backfire or * Use of the lever is become achieved by simply releasing stability and carbon monoxide, and engine. WARNING! - In caseanor ofodourless difficulty, release the 7)added added stability and control. NEVER operate the rotary hoe when fatigued. tyne engagement control lever. NEVER insert hands fingers into the cracks Remember, fuel is a potential hazard . in injury. ot. control Lift up on the to RUN or FAST position. If engine is equipped d. resulting Turning the engine switch DO NOT transport the with the wheel Safety Clutch Lever/Operator Presence Control tasteless poison. tyne engagement control lever. ALWAYS BE ALERT! Ifthe youtiller get tired while DO NOT transport tiller with wheeldamage 1) fuel shut off valve toto the "OFF" engine may ofTurn thetrenching log / wood during the splitting to the ON position. rocker style stop switch, push or (I the =have Ignition) 1) Turn fuel shut offstops. valve theprocedure. "OFF" All action Turn the Engine 4) 6) 2) ALWAYS use the rotary axle ininthe rear position. operating the rotary hoe, take RUN a break. IfI Set you le with to pivot. For Open fuel shut-off valve. choke axle the rear position. You alone know the operational demands and position. Once the logengine /to wood has beento split return the before starting. Rewind Starter: Grasp rope that handle and Stop button STOP located either side on the 1) Turn fuel shut off valve the "OFF" position. 14) occur. STOP the and disconnect the in a type well lighted area. 6)hoe Open fuel shut-off valve. Set choke any of physical or mental condition may special conditions affecting the equipment in control toisChoke orSTARTER Startby position. 1) head clear Turn fuel shut valve toprocedure the "OFF" splitting allcontrol debris andoff repeat theengine RECOIL main console the engine. le forward. When pull6) slowly until resistance felt towork, prevent kickback. Then depth shoe (if removing position. be aggravated by strenuous consult with spark plug lead(s) andor allow your situation anddown. therefore assume the to 6) Adjust Adjust depth shoe (if equipped) equipped) by removing control to Choke or Start position. 2) Allow machine totocool 5) cord ALWAYS operate the rotary 2) Allow machine cool down. Set throttle control to Run or Fast Pull the starter grip lightly position. pull rapidly to overcome responsibility for developing, out,to and shaft collar and sliding depth shoe yourlocking physician before you operate equipment. STOP ENGINE:cool Do not move choke carrying control Choke before inspecting or performing THE ENGINE: axle rearward for shaft locking collaruntil and sliding depth shoe toto 6)2) STOPPING Set control tothis Run or Fast you feel resistance, hoe on level ground only. Allow machine to cool down. enforcing the safety concepts which apply to your position. Set engine compression and startthrottle engine. NEVER operate the rotary hoe under the influence 3) Wash mud and dirt off of the garden tiller. Shut off switch on position to stop engine. Backfire or engine damage may desired position. Replace shaft locking collar. maintenance on the rotary hoe. 3) Wash mud and dirt off of the garden tiller. desired position. Replace shaft locking collar. 2) Allow machine to cool down. 3) position. Setwith own operation to effect the greatest safety for pullthe briskly. Police area before rotary Repeat ifstop necessary choke switch toengine On orthen of medication, alcohol or drugs. console should beanddirt occur. Move throttle control to SLOW Ensure no water enters the carburettor. yourself the people around you. 15) 3) Wash mud and off of the garden tiller. REFUELLING Ensure no water enters the carburettor. stop switch to On or Return the starter hoeing. Remove any foreign objects in the digging 7) Open fuel shut-off valve. Set choke off and throttle control in FAST Run position. Pull notmud shut off offdirt Open fuel shut-off valve. Set choke position, then push rocker switch tothe O 3) used, Wash and off ofthe garden tiller. r with7)the wheel ALWAYS KEEP YOUR HANDS, * Shut the engine. DO NOT REFUEL Ensure no water enters carburettor. grip gently. Run position. Pull 1) shut off to the "OFF" area - bricks, rocks, wire and sticks. Locate and markTurn fuel(STOP), position. Operate engine inChoke fast 4) Remove any weeds, wire, rope control to or position. 4) onvalve engine. or turn key to off if equipped. starter cord rapidly. 4) switch Remove any weeds, wire, rope or or other other control to Choke orStart Start position. Ensure no water enters the carburettor. FEET AND BODY AWAY FROM AN ENGINE WHILE OPERATING! position. any sprinkler heads, water pipes, to gasRun lines,or Fast position. a.4) Move starter cord rapidly. material that may have wrapped around the Set throttle control the throttle lever Remove any weeds, wire, rope or other material that may have wrapped around the Set throttle control to Run or Fast Repeat (if necessary) THE DIGGING WHILE 4) electrical * Allow engine to cool. Minimum 5 or minutes and telephone orZONE any(DO other hazard 4) to Remove any weeds, ropearound other the MIN position. Repeat necessary) tynes and rotor assembly. Set engine orposition. roll log /(if wood onto cables lifting table NOT EXCEED material that have wire, wrapped the tynes and rotormay assembly. position. Set engine with choke off. AFTER USE ENGINE IS RUNNING. * USE UNLEADED FUEL ONLY. a. Start and warm up engine. “The Right Way to Rent” ped)Place by removing either below or above ground. Some engine applications use a material that may have wrapped around the with choke off. 250KGS/550LBS). stop switch to On or tynes and rotor assembly. Turn fuel tap to “OFF” position 2) Allow machine to cool down. stop switch to On or Use clean, fresh unleaded fuel. 5) Return wheel axle to forward position for remote-mounted throttle control 5) Return wheel axle to forward position for b. Put Wheel Drive Control Lever in neutral. tynes and rotor assembly. ng Lift depth shoe to Run position. Pull Allow machine to mix cool down (minimum 5 minutes) 7) log When in and position to 6) the DO NOT allow near the tilling, / wood roll theother logbegin /persons woodgarden between the head Run position. Pull *wheels Doenginenot oil with unleaded fuel. transport. Replace shaft locking collar. rather than the 5) Return and depth control handle to transport. Replace shaft locking collar. 7) When in position to begin garden tilling, c. and One wheel hub may disengaged wheeling) Clean with warm soapy water. Ensure no water starter cord rapidly. pull up on the tyne engagement control lever. the splitting head. your or rotary hoe. Itbe is NEVER up to the have operator tohands keep 3)(free Wash mud and dirt5)offmounted of the garden tiller. starter cord rapidly. *wheels Do not over-fill fuel tank. Allow space aft stock locking collar. Return and depth control handle to lever shown here transport position. pull up on the tyne engagement control lever. easier steering before driving machine to work enters the carburettor. 6) Return depth shoe (if equipped) to full Up Repeat (if necessary) fingersfor between the log / wood and the splitting head or bystanders and animals a minimum of 6 The tynes will begin to turn. Release the tyne for fuel expansion. 6) Return depth shoe (if equipped) to full Up Repeat (if necessary) b. transport position. Turn the engine switch Ensure no water enters the carburettor. loccation. (See Wheel Hub Feature) The choke tynes will begin tomachine turn. Release the tyne head stock. position. with off. * Do not smoke. engagement control lever to stop the tynes turning. metres (20’) away from the while in toposition. the OFF position. with choke off. alve.d.SetSqueeze choke engagement lever to engine stop thethrottle tynes turning. the safety Clutch Lever/Operator Presence * Allow no naked flame or hot material in refuelling area. operation. Tyne speed iscontrol governed by setting. NEVER place your hands orRemove fingers 8) When inin position to begin garden tilling, 4) any weeds, wire, rope or thefuel other c. Turn the Start position. fuel You alone know operational and change the Wheel Direction Control to setting. Tyne speed is governed by engine throttle 8) Control Whenand position to begin garden tilling, * Use only approved containersdemands and funnels. between the end of the log / wood and the You alone know theaffecting operational demands 7) NEVER operate the rotary hoe when fatigued. valve lever to the engage the safety clutch control lever. The desired speed and direction. special conditions the equipmentand in engage the safety(See clutch control lever. Thethat may have wrapped material around the Remember, fuel is a potential hazard o Run8)or Fast headstock. inside reference photo). Do not hurry the job. Proceed slowly andbe allow special conditions affecting the equipment in OFF position BE ALERT! If you get tired while your situation and therefore assume the tynes will begin rotating. Wheel axle must in e.8)ALWAYS Adjust the wheel speed and navigate the trencher to the tynes will begin rotating. Wheelslowly axle must be in rotor assembly. Do not hurry the job. Proceed and allow your situation and therefore assume the tynes and the machine time to do the job. When ground NEVER place your hands or fingers between the end of the operating the rotary hoe, take a break. If you have responsibility for developing, carrying out, and starting position. The trencher is designed to dig toward the rear position while tilling. the You alone know the operational demands and theand rear position while tilling. Release the the machine time to dodrive the job.Release When ground responsibility for developing, carrying and log / wood the splitting head. enforcing the safety concepts the which applyout, toinyour is type extremely hard, reduce engine speed. Consider any ofclutch physical or Wheel mental condition that maytynes the operator (with the Control Lever in special conditions affecting equipment safety control lever to stop the safety clutch control lever to stop the tynes enforcing the safety concepts which apply to your is extremely hard, reduce engine speed. Consider own operation to effect the greatest safety 5) Return wheel axle to forward for assume the for be aggravated by strenuous consult with reverse). With this in mind, position the machine to speed. your position situation and therefore watering the surface and reducing engine NEVER position the log by placing your hands or engine fingers at rotating. Tyne speed iswork, governed by rotating. Tyne speed isinitially governed by engine own operation to effectaround the greatest safety for watering the surface and reducing engine speed. yourself and the people you. responsibility for developing, out, andof start the trench. Note: When engagaing the your physician before you operate this equipment. 1)shaft Allowlocking machineyourself tocollar. cooland down. Washaround mudcarrying and dirt off Adjust wheels and depth shoe accordingly whileReplace the ends of the setting. log / wood. throttle transport. the people you. throttle setting. enforcing the safety concepts which apply to your rotating chain into ground, aware that in the hard or Adjust wheels and depth shoe accordingly while NEVER operate thethe rotary hoe be under the influence the hydraulic trencher. Ensure no water enters the tilling Position the ground log by placing a hand on the topmay of the log / own operation to effect the greatest safety for the rotating trencher chain ofrocky medication, alcohol or drugs. tilling yourself and WARNING! ––forward. KEEP HANDS AND wood as close to the the log /6) wood as reason possible. Return depth shoe carburettor (if equipped) tothe people fullaround Upyou. WARNING! KEEP HANDS AND aggressively digcentre in and of lurch For this 2) Remove any objects that may have wrapped around NEVERmake havesure your hands or fingers close to the headstock FEET CLEAR OF TYNES AT ALL ALWAYS KEEP YOUR HANDS, that theres is sufficient clearance from FEET CLEAR – OFKEEP TYNES AT ALL position. WARNING! HANDS AND the trencher chain or assembly. or splitting head while the machine inAWAY operation. TIMES! structures, objects orAND people in front of the HANDS machine. FEET BODY FROM WARNING! –is KEEP AND TIMES! FEET CLEAR OF TYNES AT ALL REMEMBER OPERATING THIS MACHINE IS A SINGLE © Copyright 2013, Red Roo Sales & Service Company Pty. Ltd. 1301-0066-A THE DIGGING ZONE WHILE FEET CLEAR OF TYNES AT ALL “The Right Way to Rent” ©©Copyright Pty. n garden tilling, TIMES! Copyright2001, 2001,Red RedRoo RooSales Sales&&Service ServiceCompany Company Pty.Ltd. Ltd. 1301-0018 1301-0018 PERSON OPERATION. Keep all bystanders a minimum of “The to Rent” Rent” ENGINE IS RUNNING. TIMES! “TheRight Right Way Way to 6 metres (18 feet) away. OPERATION OF OPERATION OF GT622 GT622 USE COMMON SENSE AND PLENTY OF IT ontrol lever. The ™ ™ ™ ™ ™ SAFETY SAFETY PRECAUTIONS PRECAUTIONS SAFETY PRECAUTIONS SAFETY PRECAUTIONS SAFETY PRECAUTIONS AND OPERATING AND OPERATING OPERATING AND OPERATING AND OPERATING INSTRUCTIONS AND OPERATING INSTRUCTIONS INSTRUCTIONS INSTRUCTIONS INSTRUCTIONS INSTRUCTIONS TRANSPORT AFTER AFTER USE USE AFTER AFTER USE USE AFTER USE AFTER USE © Copyright 2012, Red Roo Sales & Service Company Pty. Ltd. 1301-0069-A © Copyright 2012, Red Roo Sales & Service Company Pty. Ltd. 1301-0069-A Be sure Tyne Control Lever is set to “Neutral” while loading and unloading the rotary hoe and when moving to or from jobsite. BEFORE USE Ensure that all grass and weeds have been cut as low as possible. If the rotary hoe is to be used in clay or hard ground conditions, it is recommended to water the area thoroughly and allow sufficient time for earth to soften. OPERATING INSTRUCTIONS Police the area. Remove any foreign objects from the area. Identify and mark the location of sprinkler heads, gas pipes, telephone cables etc. TRANSPORT Be sure Tyne Control Lever is set to “Neutral” while loading and unloading the rotary hoe and when moving to or from jobsite. GT622 HLS BEFORE USE GT5 GT5 GARDEN HYDRAULIC GARDEN GARDEN LOGTILLER SPLITTER TILLER TILLER 1) . Ensure that all grass and weeds have been cut as low as possible. 2) If the rotary hoe is to be used in clay or hard ground conditions, it is recommended to water the area thoroughly and allow sufficient time for earth to soften. 3) 4) GT622 GARDEN Police the area. Remove any foreign objects from the area. Commercial Environmental Equipment Commercial Equipment Identify and markEnvironmental the location of sprinkler heads, gas pipes, telephone cables etc. Commercial Outdoor Power Equipment CommerDemonstration cial Outdoor PowerAvailable Equipment at: Online www.redroo.com/products/logsplitter ...now USE COMMON THE ENGINE:SENSE 3) STARTING 8) ALWAYS make certain the Tyne Control Lever is PROCEDURE: 5) setTRENCHING at neutral while loading and unloading the Make sure that there is USERS sufficient clearance from AND PLENTY OF IT SAFETY INSTRUCTIONS FOR RH918 USERS a. SAFETY Move the fuel valve INSTRUCTIONS FOR HLS structures, objects or people in front of the machine lever to ON 1) DO NOT allow any person operate the OPERATION OF GT622 SAFETY position. USE rotary COMMON SENSE hoe without first reading and rotary hoe, or moving to and away from working area. INSTRUCTIONS FOR HT912 USERS a. Put Wheel Drive Lever in neutral. 9) NEVER run the machine in reverse while the tynes 8) makemove certain the Tyne Control Lever is rotating. Always the tyne control lever to 9) areALWAYS place your hands or fingers b. “OFF” Be sure both hubs are engaged (turn hub lock handle before reversing the wheels. set at neutral while loading and unloading the WARNING! – IN CASE between theOF endDIFFICULTY, of the log / wood Operating Controls understanding the safety instructions and b.1) To start a cold ™ Remove the garden tiller (See Free Wheel Hub Feature) 10) clockwise). Hydraulic Lifting rotary hoe, or moving to and away from working area. NEVER operate the unit without the safety 10) NEVER operate the unit without the safety and the headstock RELEASE THE TYNE ENGAGEMENT operating instructions. engine, move the Platform Control Lever c. Have engine atinfull throttle (forward). from its trailer/carrier/ute. Use caution. Splitting Head guards place and in working order. Keep guards in place and in working order. Keep place your KNOW THEchoke CONTROLS AND HOW TO STOP 9) NEVER run CONTROL LEVER. ALLhands TILLING ACTION the machine in reverse while or thefingers tynes choke lever 1) Control Lever DOor NOT allow any person operate the d.between Hold Digging Control Lever ingood Onthe position. theend unitChain well maintained and in Engineworking order the unit well maintained and in good the of the log the / wood and splitting THE ROTARY HOE QUICKLY IN AN EMERGENCY. rod (applicable are rotating. Always move the tyne control lever to head STOPS. Turn engine "STOP" switch 2)1) Familiarize yourself with the machine and its rotary hoe without first reading and e. Squeeze the safety Clutch Lever/Operator Presence Control. working order. Throttle Splitting DO NOT allow any person to operate the 1) Head thebefore log byreversing placing your hands or fingers the KEEP YOUR HANDS, FEET AND BODY Remove the hyd 11) 8)position ALWAYS to theallow ALWAYS make certain the Control Lever isat “OFF” the wheels. DO NOT allow any person to operate the 1)without to off located on Tyne the engine. 2)types) NEVER children tosplitter operate the rotaryfirst hoe. Control 11) DO NOT leave the machine unattended while the controls. understanding the safety instructions and f.end Slowly lower the digging boom until the desired trench hydraulic log reading trailer. Use caut of the log / wood. Log Cradle AWAY FROM THE DIGGING CHAIN AND OTHER CLOSED set at neutral while loading and unloading the hydraulic trencher without first reading and 10)engine NEVERusing operate the unit without the safety isisrunning. 3) ALWAYS depth achieved the Digging Boom Control Lever. operating instructions. wear protective clothing when operating and understanding the owners manual. Position the log by placing a hand on the top of the log / Head Stock MOVING PARTS WHILE ENGINE IS RUNNING. position. Engine rotary hoe,guards or moving to and away from working area. understanding instructions and 3)KNOW Adjust wheels if required, using wheel the safety incentre place and in reverse. working order. 12) theTHE rotary hoe. read This includes, but is not limited to; DO overspeed the engine orthe alter the/governor g.wood PutNOT Wheel Drive Control Lever in Start atKeep low speed. Also and understand thehandle engine CONTROLS AND HOW TOthe STOP as close to the of log wood as possible. Exhaust To restart a the operating instructions. KNOW THE AND Stop the Engine: Release the tyne engagement 9)9)CONTROLS adjustment lever. the unit well is maintained and in good 12) DO NOT allow other persons near the hydraulic NEVER run the machine infingers reverse while thethe tynes safety glasses, loose fittingperson gloves, steel capped settings. Excessive speed dangerous and will h. Adjust wheel speed until a workable speed isheadstock reached Know operating controls and how to stop THE ROTARY HOE QUICKLY IN ANoperate EMERGENCY. have your hands or close to 1) manual. DO NOT allow any the warm engine, HOW TO STOP THE HYDRAULIC NEVER TRENCHER QUICKLY control lever. Move throttle to Slow position. 1) trencher. It is up to the operator to keep boots and hearing protection. NEVER wear loose Police th working order. shorten engine life. are rotating. Always move the tyne control lever to Use a very slow speed for trenching and adjust for soil the machine quickly in an first emergency. 10) or splitting head while the machine is in operation. Remove NEVER operate the unit without the safety rotary hoe without reading and leave the choke lever or choke rod inusing the OPEN position. IN AN EMERGENCY. Adjust depth shoe required, the depth 2) 4)NEVER allow children toifoperate the rotary hoe. fitting clothing or jewellery when operating the bystanders and animals a minimum of 6 metres 13) foreign o 11) Set engine stop switch to Stop oranas Off position. DO NOT leave the machine unattended while the “OFF” before reversing the wheels. conditions as necessary. If objects such rocks or roots NEVER operate the rotary hoe in guards in place and in working order. Keep hand completely from the log / wood once the splitting head understanding the safety instructions and 2)Move NEVER allow children or untrained adults to children to operate the jam rotary hoe. Keep all clothing away from moving (20ft) away from the machine while in operation. control adjustment lever. c. operator NEVER allow hydraulic trencher. 2) the in the chain, release the Safety Clutch Lever/Operator engine is running. DO NOT move choke enclosed area. Engine exhaust contains 3) ALWAYSoperating 10) wear protective when operating the unit well maintained in good NEVER operate the unitand without theworking safety order engages the log / wood. instructions. 2) Identify and mark the loca operate the hydraulic log clothing splitter parts. Items could become caught in the machine, zone 10) 12) Presence NEVER operate the unit without the safety throttle lever Control, then reverse the chain to dislodge the carbon monoxide, anand odourless and 13) NEVER in an the hydraulic trenchergas control to Choke or Start the rotary hoe. This includes, but is not limited to; guards in place in working order. Keep DO NOT overspeed the engine or alter the governor 3) 1) trencher Remove ALWAYS wear protective from its telephone cable 5) Ensure the tyne engagement control lever is in 11) ALWAYS KEEP YOUR HANDS, FEET AND BODYoperate the hydraulic pipes, KNOW THE CONTROLS AND HOW TO STOP resulting in injury. DO NOT allow any person to operate the 10) NEVER overspeed the engine or alter the governor 1) 3) guards in place and in working order. Keep away from the debris. If necessary move the trencher forward a few tasteless enclosed carbon ALWAYS wear position to stop engine. clothing when safety glasses, loose fitting The gloves, capped Use Hydraulic caution. Log/Wood the unitpoison. well maintained and inand good settings. Excessive speed is dangerous andwill willshorten AWAY FROM THE DIGGING AND OTHER area. Engine exhaust containstrailer. the neutral position. engagement THE ROTARY HOE QUICKLY IN tyne ANsteel EMERGENCY. hydraulic trencher first reading andoperating settings. speed isand dangerous 4)MIN theExcessive unit well maintained in goodCHAIN working order ALWAYS use the rotary without position, inches and trench the area again. monoxide, an odourless and tasteless poison. protective clothing when the hydraulic trencher. boots and hearing protection. NEVER wear loose working order. shorten engine life. Backfire or engine MOVING PARTS WHILE ENGINE IS RUNNING. Lifting Platform understanding the safety instructions control lever is located on the left handand side of the 11) 14) engine life- KEEP STOP the engine and disconnect the hoe1/3 in a lighted about ofwell the 1) oil is under Remove the hydraulic trencher from its WARNING HANDS AND FEET CLEAR Hydraulic operating the hydraulic ALWAYS KEEP YOUR HANDS, FEET AND BODY 2) NEVER This includes, to, safety glasses, hard hat allow children toarea. operate the rotary hoe. but is not limited 14) WARNING: extreme DO NOT allow any person to operate the 11) fitting clothing or jewellery when operating the 13) DO NOT leave the machine unattended while the damage may occur. Tow Coupling NEVER operate rotary hoe in anhydraulic operating instructions. KNOW THE CONTROLS AND spark plug lead(s) andthe allow engine toOTHER toward theincludes, machine below handle bar. The neutral position OF TRENCHING CHAIN AND MOVING trailer. Use caution. 12) DO NOT allow other persons near the AWAY FROM THE DIGGING CHAIN AND OTHER logsplitter. This but isreading not limited to; safety 5)way yourself with th 1) Familiarize ALWAYS operate the rotary loose fitting gloves, steel capped boots and hearing protection. 11) NEVER operate the hydraulic logsplitter in Locking Pin pressure and can get under skin and burn hydraulic trencher without first and rotary hoe. Keep all clothing away from moving engine is running. 3) ALWAYS wear protective clothing when operating cool before inspecting or performing HOW TO STOP THE HYDRAULIC TRENCHER QUICKLY PARTS AT ALL TIMES! MAX position. enclosed area. Engine exhaust contains Jockey 1) with cardboard. Police the area. Remove trencher. It is up to the operator to keepcontains any and its controls. of theloose lever fitting is achieved by releasing the MOVING PARTS WHILE ENGINE IS RUNNING. trencher glasses, gloves, steel capped boots and hoe onsimply level ground only.loose an enclosed area. Engine exhaust or poison. Check for leaks understanding the safety instructions and NEVER wear fitting clothing or jewellery when parts. Items could become caught in the machine, maintenance on the rotary hoe. 12) DO NOT overspeed IN AN EMERGENCY. the rotary hoe. This includes, but isloose notarea limited to; Wheel the alter theand governor Safety Towthe Chain carbon monoxide, odourless bystanders and animals adifficulty, minimum of 6 metres foreign objects from area. WARNING! - Inengine casean ofor release the Police the before rotary hearing protection. Never wear fitting clothes tyne engagement control lever. carbon monoxide, an odourless and tasteless operating the hydraulic trencher. Keep all clothing operating instructions. KNOW THE CONTROLS AND 2) Free Wheel Hub Feature resulting in STOP the engine and disconnect the spark 12) 15) settings. d. safety DO NOT allowaway other persons near15) the hydraulic Turning theinjury. engine switch REFUELLING glasses, looseoperating fitting gloves, steel capped Excessive speed iskill. dangerous and willoperation. Safety Clutch Lever/Operator Presence Control tasteless poison. (20ft) from the machine while in hoeing. Remove any foreign objects in the digging NEVER allow children to operate the hydraulic trencher. 2) or jewellery when the hydraulic logsplitter. poison that can away from moving parts. Item could become HOW STOP THE HYDRAULIC TRENCHER QUICKLY one free wheeling pin plug lead(s) and1)allow engine to cooland before trencher. Ittrenching is life. up theaction operator to REFUEL keep to the ON position. Police Remove any Pull * engine Shut off thetoengine. DO NOT 2) Identify markthe thearea. location of sprinkler heads, All stops. Turn theinEngine 4) TOboots and protection. NEVER wear loose shorten ALWAYS use therocks, rotary area -hearing bricks, and sticks. Locate and mark Keep allwear clothing away from moving parts. Open fuelwire shut-off valve. Set NEVER operate the hydraulic trencher an on the or performing maintenance caught inchoke the machine, resulting in 13) injury. IN 3) AN 6) EMERGENCY. ALWAYS protective ring. Rotate the pin until th inspecting on bystanders and animals a minimum of 6 metres foreign objects from the area. AN ENGINE WHILE OPERATING! Stop button to STOP located either side gas pipes, telephone cables, etc. 1) Turn fuel shut off valve to the "OFF" 12) NEVER leave this machine unattended while the 14) fitting clothing or jewellery when the 13) STOP the engine and disconnect the carbon hoe in a well lighted area. any sprinkler heads, water pipes, gas lines, Items could become inoperating the machine, enclosed area. Engine exhaust contains NEVER operate the rotary hoe in an control tocaught Choke or Start position. clothing when operating pin aligns with the slot in t the hydraulic trencher. RECOIL STARTER main control console or the engine. (20ft) from the machine while in operation. 4) * away Allow engine to cool. Minimum 5 minutes ALWAYS use hydraulic trencher engine in a well lighted area. NEVER rotary allow children to operate the hydraulic trencher. is running. position. electrical and telephone cables or any other hazard hoe. Keep all clothing away from moving spark plug lead(s) andexhaust allowtasteless engine to intrencher. injury. monoxide, an odourless and poison. enclosed area. Engine contains 2) Identify and mark the location of sprinkler heads,the pin to slide through the 5) resulting the hydraulic ALWAYS operate the rotary Set or throttle control tothe Run or Fast the starter grip lightly * USE UNLEADED FUELtrencher ONLY. 16) REFUELLING 13)all 6) NEVER operate the hydraulic inimmediately an either below abovePull ground. 5) ALWAYS make certain that control clutches are Items could become caught in glasses, machine, coolinbefore inspecting or performing STOPPING THE ENGINE: ALWAYSparts. wear protective Bepipes, sure telephone Tyne Control Leveretc. is set to “Neutral” wheel. Roll the trencher un 13) ALWAYS STOP the engine if a cables, carbon monoxide, an odourless and This includes, but is not limited to, safety hard hat 14) WARNING: Hydraulic oil is under extreme until you feel resistance, hoe on level ground only. Use clean, fresh unleaded fuel. 2) Allow machine to cool down. position. Set engine 4) ALWAYS operate the hydraulic logsplitter in a position prior to starting * Shut off engine. DOgas NOT REFUEL AN ENGINE enclosed area. Engine exhaust contains carbon Shut off switch on the “disengaged” the engine. clothingresulting when operating in injury. maintenance on the rotary hoe. while loading and unloading the hoe hole in the hub. The whee hydraulic leak occurs. NEVER operate this Familiarize yourself with therotary hydraulic 1) 6) loose fitting gloves, steel boots and hearing DOto NOT allow other persons near protection. the rotary tasteless poison. pressure and canand get under skin and burn WHILE OPERATING! pullthe briskly. * Do not mix oil with unleaded fuel. Police area well-lighted area stop switch Oncapped orthen monoxide, an odourless tasteless poison. console should be Thebefore safety clutch lever/Operator 15) Presence Control on the4)hydraulic trencher. and when moving to or from jobsite. 3) Wash mud and dirt off of the garden tiller. machine with frayed, kinked, cracked or trencher and its controls. REFUELLING rotary hoe. It is up to the operator to keep Reverse the procedure to ALWAYS use the rotary or poison. Check for leaks with cardboard. * Do not over-fill fuel tank. Allow space NEVER wear loose fitting clothing or jewellery when Return the starter hoeing. Remove any foreign objectshard inthe the digging * Allow engine to cool. Minimum 5 minutes MAXIMUM ANGLE is for operator protection. Run position. Pull used, not shut off off the left handlebar DOfor NOT This includes, is nothydraulic limited to, safety glasses, hat 14) 14) WARNING: Hydraulic oilengine. isand under extreme 5) NEVER operate the hydraulic damaged hoses, fittings, or tubing. bystanders and animals minimum ofmark 6 * Shut DO NOT REFUEL Ensure no water enters the carburettor. fuel expansion. operating the trencher. Keep allaLocate clothing STOP the engine disconnect the hoe inbut abricks, well lighted area. grip gently. OF OPERATION Free Wheel Hub Feature Operation: 2) 15) area rocks, wire and sticks. and IGNITION: Must be in “ON STOP the engine andskin disconnect the spark * USE UNLEADED ONLY.yourself Use clean, switch on engine. tape or otherwise bypass this Safety Device. Familiarize with the hydraulic 1) FUEL loose fitting gloves, steel capped boots and hearing protection. starter cord rapidly. pressure and can under and burn logsplitter on a slippery, muddy, or down DO NOT EXCEED * Do not smoke. metres (20’) away from the machine while in away from moving parts.water Itemwet, could become AN ENGINE WHILE OPERATING! spark plugget lead(s) andengine allow engine to fresh unleaded Pull one free wheeling pin slightly, using to thestop. split plug lead(s) and allow toand coolor before fuel. any loose sprinkler heads, pipes, gas lines, 14) ALWAYS STOP the engine disconnect the 5) wear trencher and its controls. a. Move the throttle lever ALWAYS operate the rotary 15º ANGLE or poison. Check for leaks with cardboard. 4) Remove any weeds, wire, rope other MAXIMUM NEVER fitting clothing or jewellery when icy surfaces. ALWAYS keep your work Repeat (if necessary) * Allow no naked flame or hot material in refuelling area. operation. 6)any ANGLE ALWAYS operate caught in the machine, resulting in injury. TRANSPORT 4) * Allow engine to cool. 5 minutes cool before inspecting orMinimum performing ring. Rotate the pin until the 3mm (1/8”) diameter roll inspecting or performing maintenance on * Do not mix oil with unleaded fuel. OFhazard spark plug lead(s) and allow the engine to cool electrical and telephone cables or other to the MIN position. 1) Ensure that all grass and weeds have been cut hoe on level ground only. operatingarea the hydraulic Keep all clothing OPERATION ENGINE: Throttle cable co * Use only approved fuel containers and funnels. clear oftrencher. debris. material that may have wrapped around the Free Wheel Hub Feature -slot Operation: 2) hydraulic trencher 15) with choke off. STOP the engine and disconnect the spark * USE UNLEADED FUEL ONLY. pin aligns with the in the mounting plate. Allow maintenance on the rotary hoe. 7) the hydraulic trencher. NEVER operate the rotary hoe when fatigued. a. * Do not over-fill fuel tank. Allow space for Start and warm up engine. 4) down (Minimum 5 minutes) ALWAYS use hydraulic trencher in a well lighted area. WARNING make sure that the hydraulic lifting platform either below orItem above ground. Some engine applications use ato cool as lowone as possible. away from moving parts. could becomethe areaDObefore Police rotary Operate at full throttle (all Remember, fuel isengine a potential hazard . Be Tyne Control Lever set to NOT EXCEED 15º ANGLE freepin wheeling pin slightly, the issplit on level ground only. tynes and rotor assembly. plug lead(s) andclean, allow before the tosure slide through the using slot. Repeat for the“Neutral” other Use unleaded fuel. ALWAYS BE ALERT! If you near get tired while 6) allow bystanders the hydraulic fuel expansion. Pull 15) REFUELLING is in the highest position (inside the mudguard) and remote-mounted throttlefresh control 16) ALWAYS REFUELLING caught in the machine, resulting in injury. b. Put Wheel Drive Control Lever in neutral. 5) hoeing. Remove any foreign objects in the digging ALWAYS make certain that all control clutches are in while loading and unloading the rotary hoe ring. Rotate the pin until the 3mm (1/8”) diameter roll 15) inspecting or performing maintenance on inlogsplitter. position totake begin garden tilling, Police area before trenching. Remove any foreign 2) If the*Allow 6) 7) When rotary hoe is to the be used in clay oreach hard DO NOT allow other persons near the wheel. Roll trencher until pin drops intoDRIVE a WHEEL CONTROL L operating the rotary hoe, a break. If youthe have Do not mix oil with unleaded fuel. OPERATING THIS MACHINE no naked flame with to the headstock before Shut off engine. DO NOT REFUEL the Shut engine. DO REFUEL ANTo ENGINE Youenginealone know the operational demands and •***wheels Turn Offthe Engine: • NOT Allow Engine Cool 5) rather Return and depth control handle to * Do not smoke. the “disengaged” position prior to starting the engine. -any bricks, rocks, wire and sticks. Locate and mark pinsecured aligns with theretaining slot inThe thepin mounting plate. Allow and moving tohubs or jobsite. the than hydraulic trencher. c. area One wheel hub may disengaged (free wheeling) objects in the digging area eg bricks, rocks, wire and ground conditions, itwhen is recommended to from water ALWAYS use hydraulic trencher in aPERSON well lighted area. hole in the hub. wheel are now locked. pull up on tyne engagement control lever. type of the physical mental condition that speed forward or reverse a rotary hoe. Itbe isor up to the operator tomay keep or hot material in refuelling area. * Do not over-fill fuel tank. Allow space The IS A SINGLE OPERATION. It special conditions affecting the equipment in towing. DO NOT ATTEMPT TO TOW THIS MACHINE mounted lever shown here AN ENGINE WHILE OPERATING! WHILE OPERATING! • Minimum 5 Minutes safety clutch lever/Operator Presence Control on and mark 16) position. thearea pin thoroughly to slide through the slot. Repeat for other any sprinkler heads, water pipes, gas lines, for easier steering before driving machine work sticks. Locate any sprinkler transport heads, water the allow sufficient time Reverse theand procedure to unlock thethe wheels. be certain aggravated strenuous work, consult with your situation and therefore assume 5 theminutes bystanders and animals aRelease minimum of 6 tyne REFUELLING The tynes begin to turn. the is will theisby operator’s responsibility to keep for fuel expansion. ALWAYS make that all control clutches are into WITHOUT THE LIFTING TABLE BEING SECURED TO * Allow engine to cool. b. Turn the engine switch * Allow engine to cool. Minimum minutes • USE UNLEADED FUEL ONLY DIGGING BOOM CONTROL * Use only approved fuel containers and funnels. the left handlebar for operator protection. DO NOT the trencher until each pin drops into a electrical and telephone cables ortoany other loccation. (See Wheel Hub Feature) forwheel. earth Roll to soften. pipes, gas lines, electrical and telephone* Shut cables orDo any smoke. responsibility developing, carrying out, and your physician before you operate this equipment. off engine. DOforNOT REFUEL AN ENGINE engagement control lever stop the tynes turning. bystanders and animals at ainhazard minimum of the “disengaged” position prior to starting the engine. metres (20’) away frombypass the machine while IGNITION: be inTHE “ON” position to start. “OFF” boom. THE HEADSTOCK INhubs UPRIGHT **USE USEnot UNLEADED FUEL ONLY. Use to the OFF position. the digging Use Clean, unleaded fuel *• UNLEADED FUEL ONLY. Remember, hazard. tape down oror otherwise this Safety Device. in the hub. TheMust wheel are now locked. enforcing the safetyfresh concepts which apply to your clean, fuel is a potentialhole other hazard either below or above ground. either below above ground. NEVER operate the rotary hoe under the influence d. Squeeze the safety Clutch Lever/Operator Presence WHILE OPERATING! Be sure Tyne Control Lever is set to “Neutral” 6operation. metres (18 feet) away from by the hydraulic logsplitter The safety clutch lever/Operator Presence Control on *Use Allow no naked flame or hot material in refuelling area. to stop. Tyne speed is governed engine throttle setting. POSITION. fresh unleaded fuel. 3) 80CHAIN 50 own operation to effect the greatest safety for Police the area. Remove any • Do-Not over-fill fuel tank clean, fresh unleaded fuel. Reverse the procedure to unlock the wheels. DIGGING MAXIMUM of medication, alcohol or drugs. c. Turn 6)left while the the fuel ALWAYS operate * Allow engine to cool. Minimum 5 minutes You alone know the operational demands and Control and change theother Wheel Direction Control to the machine unattended 1) NOT Ensure that all grass and weeds have been cut MPH CONTROL 7)DODO NOT leave while engine while loading and unloading the rotary hoe the6) handlebar is for operator protection. NOT yourself and the people around you. *Do Use only approved fuel containers and funnels. DO exceed 80kms (50mph) per hour KPH * Do not mix oil with unleaded fuel. ANGLE OFin operation. foreign objects from the area. DO NOT allow persons near the Allow space for fuel expansion • * not mix oil with unleaded fuel. ENGINE: Throttle cable controls engine speed. 7)down position BEFORE clutch lev NEVER operate the direction. rotary hoe when fatigued. leverUNLEADED the hydraulic trencher IGNITION: Must be in machine. “ON” position start. “OFF” desired speedbypass and special conditions affecting the equipment * USE FUEL ONLY. Use clean, OPERATION is running. DO NOT park on incline orvalve park as low possible. tape or otherwise this Safety Device. andas when moving to ortofrom jobsite. *to Do notno over-fill fuel tank. Allow space for inin when towing Make sure that Remember, fuelfuel isflame atank. potential hazard . ALWAYS KEEP YOUR HANDS, Allow naked or hot material rotary hoe. Itthe is up to theontired operator to keep *• Do not over-fill Allow space NEVER operate hydraulic logsplitter when Operate atthis full throttleof (all the way forward). 8)7) Do not hurry the job. Proceed slowly and allow to start chain in motion. Ch DO NOT EXCEED 15º ALERT! ANGLE OFF position level ground only. ALWAYS BE If you get while to stop. 4) Identify and mark the location sprinkler heads, fresh unleaded fuel. your situation and therefore assume the perpendicular to slope. DO NOT freewheel down incline. e. Adjust the wheel speed and navigate the trencher to the fuelfuel expansion. MAXIMUM the trailer coupling is secure and lights are operating FEET AND BODY AWAY FROM refuelling area ALWAYS bystanders and animals aoperate minimum of 6ground fatigued. ALWAYS BE ALERT! If you get tired while for expansion. 2) If the rotary hoe is to be used in clay or hard after clutch lever the machine time to do the job. When gas pipes, telephone cables etc. operating the rotary hoe, take a break. If you have responsibility for developing, carrying out, and the area before trenching. Remove any foreign * Do not mix oil with unleaded fuel. ANGLE OF Police starting position.THE The trencher is 8) designed to dig toward the engine or alter the governor WHEEL DRIVE CONTROL LEVER:speed. Controlsdirection wheel *You Do not smoke. no splitter naked properly. alone knownear the *Allow operational demandsflame and ENGINE: Throttle cable controls engine DIGGING ZONE DOWHILE NOT overspeed Doenforcing not smoke the log • Do hydraulic trencher * not smoke. OPERATIONmetres operating the hydraulic logspllitter take a break. If (20’) away from the machine while in ground conditions, it is recommended to water the safety concepts which apply to your * Do not over-fill fuel tank. Allow space for objects in the digging area eg bricks, rocks, wire and is type extremely hard, reduce engine speed. Consider any of physical or mental condition that may the operator (with the Wheel drive Control Lever in speed forward or reverse after clutch lever is engaged. FORWARD/REVERSE DIGG special conditions affecting the equipment in or hot material in refuelling area. Operate at fullRESPONSIBILITY throttle (all the wayOF forward). ENGINE RUNNING. settings. Excessive speed is dangerous and will*• Allow DO NOT EXCEED 15º ANGLE Use only approved containers and onIS level ground only. you have any type ofmind, physical or mental condition IT IS THE THEsufficient INDIVIDUAL TOWING no naked flame orfuel hot insafety refuelling area. “The Right Way to Rent” operation. the area thoroughly and allow timeAllows own effect thematerial greatest fuel expansion. sticks. Locate and mark any sprinkler heads, water be aggravated by strenuous work, consult with reverse). With this in position the machine to speed. youroperation situationtoand therefore assume the for watering the surface and reducing engine LEVER: manual ope shorten engine life 1) funnels. Remember, fuel a potential hazard that grass and weeds have been cut DIGGING BOOM CONTROL LEVER: Raises and lowers Police the area before trenching. Remove any engagaing foreign * Use only approved fuel containers andis funnels. that may be aggravated by strenuous work, or check Use only approved fuel and THISEnsure LOGSPLITTER TO MAKE SURE THEY HAVE WHEEL DRIVE CONTROL LEVER: Controls wheel pipes, gas lines, electrical and telephone cables anywhile yourself and theforpeople around you. * *Do not smoke. *Allow nocontainers naked flame for earth to all soften. responsibility developing, carrying out,funnels. andof start the trench. Note: When initially the your physician before you operate this equipment. or reverse rotation to dislod 1) Allow machine to cool down. Wash mud and dirt off 7) Adjust wheels and depth shoe accordingly NEVER operate the rotary hoe when fatigued. thelow digging boom. • Remember, Refer engine owners manual for objects with inrotating theyour digging area eg bricks, rocks, wire and Remember, fuel isto a potential hazard. as asreverse possible. 9) physician before you operate thisin machine. NEVER operate theorhydraulic trencher when fatigued. speed forward or after clutch lever is engaged. fuel is a no potential hazard .SECURED THE MACHINE PROPERLY TOterrain. THE TOW other hazard either below or above ground. enforcing the concepts which applythe to your or hot material in safety refuelling area. chain into the be aware the hard (This control can be NEVER operate the rotary under thethat influence the hydraulic trencher. Ensure water enters ALWAYS BE ALERT! Ifground, youhoe get tired while tilling sticks. Locate and mark any sprinkler heads, water full details ALWAYS BEthe ALERT! If you get tired while operating NEVER operate the hydraulic logsplitter under 3) own operation to effect the greatest safety for Police the area. Remove any To reverse chain VEHICLE. DIGGING CHAIN CONTROL LEVER: must be in “ON” rocky ground the rotating trencher chain may released.) carburettor 2) of medication, alcohol or drugs. DIGGING BOOM CONTROL LEVER: Raises and lowers 7) If the rotary hoe is to be used in clay or hard * Use only approved fuel containers and funnels. DO NOT leave the machine unattended while the engine operating the rotary hoe, take a break. If you have pipes, gas lines, electrical and telephone cables or hydraulic any the trencher, take a break. If you have any You yourself the people around you. influence of medication, alcohol or drugs. aloneand know the operational demands and foreign objects from must the area. position BEFORE clutch is depressed in dig in and lurch forward. For this reason be in “OFF” position. theBEFORE digging boom. Remember, fuelbe is aobjects potential hazard. is aggressively running. NOT on incline or park ground conditions, it islever recommended to order water 2) that Remove any may affecting have wrapped around any type of DO physical or mental condition that other hazard either below orpark above ground. USE type ofmay physical or mental condition may special that conditions the equipment in ALWAYS KEEP YOUR HANDS, to start chain in motion. Chain moves in a forward make sure that theres is sufficient clearance from NEVER step over the hydraulic log splitter 8) perpendicular to slope. DO NOT freewheel down incline. WARNING! – KEEP HANDS AND the area thoroughly and allow sufficient time the trencher chain or assembly. SAFETY CLUTCH LEVER/O 4) direction aggravated by strenuous work, consult with Identify and mark the location of insprinkler heads, by strenuous work, consult with your your situation and therefore assume the DIGGING CHAIN CONTROL LEVER: be “ON” after clutch lever ismust engaged. DO NOTbeleave the machine the engine structures, objects oris people inwhile front ofaggravated the machine. Perform a thorough and complete visual inspection of the FEET AND BODY AWAY FROM when itunattended operation –OF walk around the ALL for earth to soften. FEET CLEAR TYNES AT CONTROL: (At left handle g responsibility for developing, carrying out, and 8) your DO DO NOT overspeed the engine or alter the governor physician before you operate this equipment. NEVER position BEFORE clutch lever is depressed in order physician before you operate this equipment. gas pipes, telephone cables etc. Commer cial Outdoor Power Equipment © Copyright 2013, Red Roo Sales & Service Company Pty. Ltd. P/N 1301-0066-A is running. NOT park on incline or park hydraulic log splitter. THE DIGGING ZONE WHILE hydraulic logsplitter to get around the FORWARD/REVERSE DIGGING CONTROL DRIVE and DIGGING CHAIN settings. Excessive speed ishoe dangerous and will thetohydraulic TIMES! operate trencher under the influence ofenforcing the safety concepts which apply to your to Always start chain in motion. Chainarea movesclear in aCHAIN forward NEVER the rotary under the influence perpendicular tooperate slope. DO NOT freewheel down incline. keep your manual work and free ofany debris. other side 3) ENGINE IS RUNNING. own operation to effect the greatest safety for Police the area. Remove LEVER: Allows operation of chain in forward Stops all motion when rele shorten engine life medication, alcohol or drugs. direction after clutch lever is engaged. “The Right Way to Rent” of medication, alcohol or drugs. © Copyright 2012, Red Roo Sales & the Service Company Pty. Ltd. 1301-0069-A yourself and people around you. DO NOT overspeed the engine or alter the governor or reverse rotationforeign to dislodge objects or dig objects from thedifficult area. safety IS EVERYBODY’S BUSINESS USE COMMON SENSE AND PLENTY OF IT USE COMMON SENSE AND PLENTY OF IT SAFETY INSTRUCTIONS FOR AND PLENTY OF ITRH918 USERS USE COMMON SENSE AND PLENTY OF IT SAFETY INSTRUCTIONS FOR HT912 USERS AND PLENTY OF IT USE COMMON SENSE AND PLENTY OF IT AFTER USE OPERATION OPERATING INSTRUCTIONS BEFORE USE OPERATION HLS HYDRAULIC LOG OPERATING SPLITTER OPERATING OPERATION INSTRUCTIONS INSTRUCTIONS BEFORE USE IS EVERYBODY’S BUSINESS TRANSPORT OPERATING INSTRUCTIONS safety ...now TRANSPORT INSTRUCTIONS TRANSPORT GT5 TRANSPORT BEFORE USE AFTER USE IS EVERYBODY’S BUSINESS safety 9) NEVER operate the hydraulic trencher when fatigued. TRANSPORT SAFETY PRECAUTIONS AND OPERATING BEFORE USE INSTRUCTIONS INSTRUCTIONS TRANSPORT BEFORE USE ...now safety IS EVERYBODY’S BUSINESS ...now USEINSTRUCTIONS COMMON SENSE FOR HT912 USERS SAFETY INSTRU GARDEN BEFORE USE TILLER “The Right Way to Rent” FORWARD/REVERSE DIGGING CHAIN CONTROL