Transcript
Gas Nailers
Nailers for the professionals
Satisfying the professional’s needs
FOR MORE DETAILS SEE INSIDE
YOU WORK TO THE HIGHEST STANDARDS, SO DO OUR TOOLS.
First Fix Gas Nailer GN900SE IMPROVED Nail type Max length Gauge Magazine capacity Shots per battery Shots per gas cell Motor Magazine angle Net weight Battery type Battery voltage Charge time
Utility hook
Clipped head 50-90mm 2.9-3.3 44 Approx 4,000 Approx 1,200 Cordless 34º 3.5kg Lithium-ion 7.2v 30 min
Air filter Protects cylinder from dirt and debris to prevent malfunction.
Gas cell chamber Quick and easy load system.
REGISTER FOR 3 YEAR WARRANTY & 3 YEAR SERVICE PLAN ONLINE www.makitauk.com
Soft grip
Carry case
STANDARD EQUIPMENT: Fast charger, battery cartridges, case, hex wrench, goggles.
FIRE UP TO 7,200 NAILS PER HOUR.
The Makita clipped head gas nailer using tried and tested technology, It is suitable for timber frames, roofing, joists and a host of other applications. we now have the answer, in an truly portable machine.
The GN900SE uses our tried and tested Lithium-ion 7.2 volt battery system with a 30 minute charge time which makes the Makita GN900SE four times quicker than the leading competitor. The small and light weight 7.2 volt battery will allow you to fire up to 4000 nails per charge. The GN900SE features our LED low battery and error detection system, and a shock absorbing battery fitting to protect the terminals. The 40 gram gas cell will allow you to fire up to 1200 shots per cell using Makita nails and gas packs at a rate of 2 nails per second. In true Makita tradition the gas nailer is light weight, comfortable and perfectly balanced, it is also easy to use and well engineered. All that you have come to expect from Makita.
NAILS FOR GN900SE Contact nose 5 stage (tooled) depth adjustment and anti slip contact.
See back page
www.makitauk.com
BCC Charity
AVT
MM4
3 Year Warranty
44 nail magazine Will hold 50mm - 90mm nails with easy view quick load system
LED light service indicator Green: Good battery Red: Low/dead battery Orange: Error codes
7.2v Li-ion battery Use of a li-ion battery allows for compact and lightweight tool design.
New Products
ALL GAS NAILERS COME WITH 3 YEAR WARRANTY PLUS 3 YEAR SERVICE PLAN WORTH £495.00 OVER THE 3 YEAR PERIOD OPE Products
The promontion is for a 3 year no cost service plan, for end users who register Makita gas powered tools via the Makita website using the 3 year on line registration process and within the 30 days of purchasing the new tool. For those customers who have no internet access, a proof of purchase supplied with the tool would be required. This follows Makita current practice for 3 year warranty registration of Makita tools.
Impact Gold
Multi-Tool
Second Fix Gas Nailer GF600SE NEW Nail type Straight finishing nail Max length 15-64mm Gauge 16 Magazine Capacity 100 nails Shots per battery 4,000 shots Shots per gas cell 1,000 shots Driving depth adjustment Yes Anti-dry fire mechanism Yes LED job light Yes Battery type Lithium-ion Battery Voltage 7.2v Weight 2.2kg Charge time 30 mins
Belt hook adaptable for right or left handed use
REGISTER FOR 3 YEAR WARRANTY & 3 YEAR SERVICE PLAN ONLINE www.makitauk.com
No mar tip
Utility hook
Soft grip
Carry case
Depth dial
Job light
The Lithium-ion 7.2 volt battery with a 30 minute charge time makes the Makita GF600SE four times quicker than the leading competitor. The GF600SE features our LED low battery and error detection system, and a shock absorbing battery fitting to protect the terminals.
STANDARD EQUIPMENT: Fast charger, battery cartridges, case, hex wrench, goggles.
NAILS FOR GF600SE
Quick release jam clearing system Soft nose tip used to prevent marking work piece. Notched to help with alignment for accurate nailing
See back page
Magazine window for easy confirmation on nail size in the magazine
Misfire inhibitor plate for smaller length nails
NO LEADS, NO HOSES, JUST FAST AND VERSATILE POWER. Concrete Gas Nailer GN420CSE NEW Pin gauge Max length Magazine Capacity Shots per battery Shots per gas cell Battery type Battery Voltage Battery capacity Weight Charge time
2.6-3.1mm 15-40mm 20 pins 4,000 shots 1,200 shots Lithium-ion 7.2v 1.0Ah 3.6kg 30 mins
Flat top housing enables the machine to be placed upside down when not in use.
Dual position hook convenient for hanging the machine on a rafter or steel pipe
REGISTER FOR 3 YEAR WARRANTY & 3 YEAR SERVICE PLAN ONLINE www.makitauk.com
Utility hook
Soft grip
Depth dial
Job light
The Lithium-ion 7.2 volt battery with a 30 minute charge time makes the Makita GN420CSE four times quicker than the leading competitor. The GN420CSE features our LED low battery and error detection system, and a shock absorbing battery fitting to protect the terminals.
Carry case
STANDARD EQUIPMENT: Fast charger, battery cartridges, case, hex wrench, goggles.
PINS FOR GN420CSE Tool-less driving depth adjustment C6 pins suitable for concrete substrate <25Nm
HC6 pins suitable for harder steel concrete substrate >25Nm
See back page
Slim nose allows better visibility for easy access to the point you aim at. (enables to shoot) nails into tight spaces such as narrow metal studs, etc.
Supplied with a removable 20 shot magazine assembly as shown, a 40 shot magazine assembly is also available. 40 pcs magazine 196247-3
Nails and Accessories
SERVICE CLASS
EUROCODE 5
INDOORS
SERVICE CLASS
SERVICE CLASS
INDOORS
INDOOR NOT HEATED OR OUTDOOR PROTECTED
SERVICE CLASS
SERVICE CLASS
SERVICE CLASS
INDOORS
INDOOR NOT HEATED OR OUTDOOR PROTECTED
OUTDOOR EXPOSED TO WEATHER
SERVICE CLASS
SERVICE CLASS
NAILS FOR GAS NAILER GN900
P-77045 P-77132 P-77160 P-77051 P-77067 P-77089 P-77110 P-77148 P-77176 P-77073 P-77095 P-77154 P-77182
It is Makita’s aim to continually develop the quality of our products in line with stringent demands of industry. This is why all Makita gas nail packs are already EC5 rated (Eurocode 5). The EC5 and European standards are effective from 1st July 2013 and are applicable to all suppliers of fixings used in timber construction.
NAILS FOR GAS NAILER GF600
195667-8 195668-6 195670-9 195672-5 195674-1 195676-7 195677-5 195680-6
C6 pins suitable for concrete substrate <25Nm
HC6 pins suitable for harder steel concrete substrate >25Nm
194852-0
For all models
1
242077-1
For all models
GF600 GF600 GF600 GF600 GF600 GF600 GF600 GF600
MODEL GF600 Smooth 15 Smooth 19 Smooth 25 Smooth 32 Smooth 38 Smooth 45 Smooth 50 Smooth 64
1 1 1 1 1 1 1 1
Galvanised Galvanised Galvanised Galvanised Galvanised Galvanised Galvanised Galvanised
Ser v Cla ice ss Ga s
MODEL GN900SE Ring 50 Bright Ring 76 Bright Smooth 90 Bright Ring 50 Galvanised Ring 65 Galvanised Ring 65 Galvanised Ring 76 Galvanised Ring 76 Galvanised Smooth 90 Galvanised Ring 65 Hot dip galv Ring 65 Hot dip galv Ring 76 Hot dip galv Smooth 90 Hot dip galv
Pac k
Fin
OUTDOOR EXPOSED TO WEATHER
ish
m Len gth m
k Sha n
Dia
SERVICE CLASS
GN900SE 2.9 GN900SE 3.1 OUTDOOR EXPOSED TO WEATHER3.1 GN900SE GN900SE 2.9 GN900SE 2.9 GN900SE 3.1 GN900SE 2.9 GN900SE 3.1 GN900SE 3.1 GN900SE 2.9 GN900SE 3.1 GN900SE 3.1 GN900SE 3.1
GAS NAILER GAS
Contains lint free cloth, cleaner, oil, brush, allen key 4mm, cleaning instructions.
GAS NAILER OIL
INDOOR NOT HEATED OR OUTDOOR PROTECTED
4000 2000 2000 4000 4000 3000 2000 2000 2000 4000 4000 2000 2000
1 1 1 2 2 2 2 2 2 3 3 3 3
2000 2000 2000 2000 2000 2000 2000 2000
C6 PINS FOR STANDARD CONCRETE (<25Nm) SUBSTRATES 196290-2 GN420 2.6 Smooth 20 Galvanised 500 196291-0 GN420 2.6 Smooth 25 Galvanised 500 196292-8 GN420 2.6 Smooth 30 Galvanised 500 196293-6 GN420 2.6 Smooth 35 Galvanised 500 196294-4 GN420 2.6 Smooth 40 Galvanised 500 HC6 PINS FOR HARD CONCRETE (>25Nm) AND STEEL SUBSTRATES 196285-5 GN420 3.1 Unilock 15 Zinc plated 500 196286-3 GN420 3.1 Unilock 17 Zinc plated 500 196287-1 GN420 3.1 Unilock 22 Zinc plated 500 196288-9 GN420 3.1 Unilock 27 Zinc plated 500 196289-7 GN420 3.1 Unilock 32 Zinc plated 500
PINS FOR GAS NAILER GN420
GAS NAILER CLEANING KIT
Mo del
Par tN
o.
Fasteners must meet the requirements of EN1995 Eurocode 5. Failure to comply with these regulations will be a breach of European law.
mmmeter
Makita nails are (EC5) eurocode 5 certified where necessary and marked with the relevant service class.
From the 1st July 2013 it will become mandatory to use CE-Marked fasteners for making structural connections in timber constructions.
1
194844-9 242094-1 242088-6
GN900SE/GN420CSE GN900SE/GN420CSE GF600SE
4 2 2 4 4 3 2 2 2 4 4 2 2
2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
2 1 1
High performance gas with clean combustion and fully synthetic oil suitable for most first fix gas nailers.
GAS NAILER CLEANER
Makita lubricating oil specially formulated for gas nailers. (Size 100ml)
Makita UK
242075-5
For all models
1
Makita gas nailer cleaning spray suitable for all gas nailers. (Size 500ml)
Michigan Drive, Tongwell, Milton Keynes, Buckinghamshire, MK15 8JD T: 01908 211678 | F: 01908 211400 | www.makitauk.com
Accessories shown are not necessarily supplied as standard eqipment. Specification shown may change due to our policy of constant improvements. Subject to availability. E&OE.
Vibration and noise data can be downloaded or viewed at www.makitauk.com
Vibration and noise date be downloaded from 98N354 0513 www.makitauk.com
98N354
