Transcript
Gas Protection
Solco Building Products provide the complete gas protection system for the protection of buildings on contaminated land. Bluebay Building Products are the exclusive distributor of the Solco range of Solshield, Solseal and Solsheet Gas Protection Systems. These innovative products have been specifically designed to offer the most complete range of solutions for effective protection of buildings from the ingression of natural and radioactive gases such as radon, carbon dioxide, methane and hydrocarbons. The most recognised means of protecting buildings from gas ingress are through the installation of a concrete floor slab combined with a suitable gas resistant barrier in conjunction with a passive venting system. Traditional polythene damp proof membranes are not recommended for protecting gas on contaminated land therefore it is suggested that a specialist gas membrane and ventilation system is specified to protect against all relevant gases and contaminants. When installed in accordance with the relevant codes of practice, Solco gas systems provide a defensive barrier to gas ingress as well as a suitable damp proof membrane.
Gas Protection Systems
GAS PROTECTION SYSTEMS
Solco Gas Membranes are impermeable and act as barrier to gas ingress and should be continuous beneath the full ground floor plan of the building. Solco are able to offer full protection against the ingress of harmful carbon dioxide, methane, radon, and hydrocarbon gases when used in conjunction with Solco Gas Resistant DPCs, Jointing Systems and Gas Resistant Self Adhesive Membrane’s Solco Gas Ventilation System, when installed with a Solco Gas Barrier Membrane, helps reduce and disperse concentrations of gases emitting from the ground to acceptable levels. Solco Gas Venting Systems include all necessary accessories to suit the project specification. We are able to provide CAD drawings as well as standard detailing and technical advice in order to support the design on a any specific gas ventilation system. In order to assist specifiers Bluebay has produced a gas protection product selector that allows you select the most relevant product for your specific gas specification criteria. Gas Product Selector
Radon
Carbon Dioxide (Co2)
Methane
Hydrocarbons
Solshield Radon Gas Barrier
Solshield LP Gas Barrier
(low Levels only)
Solshield Hydrocarbon Gas Barrier
Solshield Flexible Hydrocarbon Gas Barrier
Solshield Ultra Gas Barrier
(vapours only)
Solshield Reinforced Gas Barrier
(low Levels only)
Solseal Liquid Gas Membrane
Solsheet GR SA Membrane
www.bluebaybp.co.uk
Sales: 0845 450 9766
63
Solshield Gas Membranes
Gas Protection SOLSHIELD Radon Gas Barrier • • • • • •
BBA
CE Marked BBA Agrément Certificate 12/4945 Complies with relevant codes of practice such as current BRE and CIRIA Protects against the ingress of Radon High resistance to puncture. Also acts as a damp proof membrane
BRITISH BOARD OF AGRÉMENT
SOLSHIELD Radon Gas Barrier is a very effective gas barrier for the protection of buildings and occupiers from the ingress of gas and moisture. The building regulations require that proper precautions be taken to prevent danger to health and safety when building on gas contaminated land. Technical Data When installed SOLSHIELD Radon Gas Barrier is an Thickness 300mu effective solution to the problem and can be laid with confidence. Width (m) 4 metres - 0 + 2.5% Typical areas where the membrane may be used are, Length (m) 25 metres - 0 +10% coalfields, contaminated industrial sites, landfill & Roll Weight 27.6kg brown field sites. Colour
Green
SOLSHIELD Low Permeability Gas Barrier (Amber 2) BBA
BRITISH BOARD OF AGRÉMENT
• • • • • • • •
CE Marked BBA Agrément Certificate 12/4945 Complies with current codes for BRE and CIRIA Suitable to protect against the ingress of Radon, Carbon Dioxide (CO2) and low levels of Methane. High quality robust Co-Polymer Thermoplastic Membrane. High resistance to puncture. Solshield LP has been tested by RAPRA Technology UK Solshield LP is over 60% thicker than the minimum recommended by the BRE.
SOLSHIELD LP Gas Barrier is a very effective 500 micron gas barrier for the protection of buildings and occupiers from the ingress of gas and moisture. The building regulations require that proper precautions be taken to prevent danger to health and safety when building on gas contaminated land. Technical Data
When installed SOLSHIELD LP Gas Barrier is an effective solution to the problem and can be laid with confidence. Typical areas where the membrane may be used are, coalfields, contaminated industrial sites, landfill & brown field sites. 64
Sales: 0845 450 9766
Thickness
500mu
Width (m)
2 metres - 0 + 2.5%
Length (m)
25 metres - 0 +10%
Roll Weight
23kg
Colour
Orange
www.bluebaybp.co.uk
Gas Protection
• • • • • •
CE Marked Complies with relevant codes of practice such as current BRE and CIRIA Suitable to protect against the ingress of Radon, Carbon Dioxide (CO2) and low levels of Methane. A multi-layer reinforced polyethylene membrane High resistance to puncture. Also acts as a damp proof membrane
SOLSHIELD Reinforced Gas Barrier is a low density reinforced polyethylene (LDPE) ground membrane suitable for use in areas where Carbon Dioxide, Methane & Radon are present in the ground. The building regulations require that proper precautions be taken to prevent danger to health and safety when building on gas contaminated land. When installed SOLSHIELD Reinforced Gas Barrier is an effective solution to the problem and can be laid with confidence. Typical areas where the membrane may be used are, coalfields, contaminated industrial sites, landfill & brown field sites.
Solshield Gas Membranes
SOLSHIELD Reinforced Gas Barrier
Technical Data Thickness
0.5mm
Width (m)
2.0 metres
Length (m)
50 metres
Roll Weight
27.5kg
Colour
Blue
SOLSHIELD Hydrocarbon Gas Barrier • • • • • •
CE Marked Complies with relevant codes of practice such as current BRE and CIRIA Low Permeability to latent Hydrocarbons & Methane vapours typically found in contaminated industrial sites. High quality robust Co-Polymer Thermoplastic Membrane. High resistance to puncture. Also acts as a damp proof membrane.
SOLSHIELD Hydrocarbon Gas Barrier is a very effective gas barrier for the protection of buildings and occupiers from the ingress of gas and moisture. The building regulations require that proper precautions be taken to prevent danger to health and safety when building on gas contaminated land. When installed SOLSHIELD Hydrocarbon Gas Barrier is an effective solution to the problem and can be laid with confidence. Typical areas where the membrane may be used are, coalfields, contaminated industrial sites, landfill & brown field sites.
Technical Data Thickness
1.0mm
1.5mm
Width (m)
2.5m
5.1m
2.5m
5.1m
Length (m)
35m
100m
25m
100m
Roll Weight
87.5kg
510kg
62.5kg
765kg
www.bluebaybp.co.uk
Sales: 0845 450 9766
65
Solshield Gas Membranes
Gas Protection SOLSHIELD Flexible Hydrocarbon Gas Barrier • • • • • •
CE Marked Complies with relevant codes of practice such as current BRE and CIRIA Low Permeability to latent Hydrocarbons & Methane vapours typically found in contaminated industrial sites. High quality robust flexible Co-Polymer Thermoplastic Membrane. High resistance to puncture. Also acts as a damp proof membrane.
SOLSHIELD Flexible Hydrocarbon Gas Barrier is a very effective gas barrier for the protection of buildings and occupiers from the ingress of gas and moisture. The building regulations require that proper precautions be taken to prevent danger to health and safety when building on gas contaminated land. When installed SOLSHIELD Flexible Hydrocarbon Gas Barrier is an effective solution to the problem and can be laid with confidence. Typical areas where the membrane may be used are, coalfields, contaminated industrial sites, landfill & brown field sites.
Technical Data Thickness
1.0mm
Width (m)
2.5m
5.1m
Length (m)
35m
100m
Roll Weight
87.5kg
510kg
SOLSHEET Gas Resistant Self Adhesive Membrane • • • • • • • •
CE Marked Provides protection against water and vapor. Self adhesive. Excellent adhesion to vertical and horizontal surfaces. Resistance to chlorides, sulphates, alkalis and acids. Good tear and puncture resistance. Excellent tensile strength. Can also be used as a gas resistant DPM, resistant to Radon, Methane and CO2 gases
SOLSHEET Gas Resistant Self Adhesive Membrane is a preformed waterproofing system with resistance to Methane, Radon and Carbon Dioxide . Resistance to gas is achieved by a laminate of aluminium and polythene films. The membrane is protected on the self adhesive side with a silicone coated release film. SOLSHEET Self Adhesive Membrane conforms to the requirements of BS 8102. Substrates should be primed with SOLCO Tanking Primer prior to application. SOLSHEET Gas Resistant Self Adhesive Membrane can be used with Solcourse GR DPC and other Solshield Gas Membranes 66
Sales: 0845 450 9766
Technical Data Thickness
1.0mm
Width (m)
1.0m
Length (m)
20m
Roll Weight
33kg
Colour
Black
www.bluebaybp.co.uk
Gas Protection • • • • • •
Complies with CE marking (Europe), GRI GM13 and GRI GM17 (Standards recognised by the EA for the UK) Complies with relevant codes of practice such as current BRE and CIRIA Suitable to protect against the ingress of Radon (RN), Carbon Dioxide (Co2), Methane (CH4) and Hydrocarbon Vapours. A multi-layer reinforced polyethylene membrane with integral aluminium core High resistance to puncture. Also acts as a damp proof membrane
SOLSHIELD Ultra Gas Barrier is a flexible, loose laid proprietary gas barrier for use on sites with Radon (RN), Carbon Dioxide (Co2), Methane (CH4) and Hydrocarbon Vapours where it is separated from the ground e.g. above a block and beam floor. SOLSHIELD Ultra Gas Barrier is silver on the underside and is green on the topside.
Solshield Gas Membranes
SOLSHIELD Ultra Gas Barrier
The barrier is manufactured by an extrusion/coating process which incorporates a two layer low density polyethylene membrane with a polypropylene reinforcement grid and an aluminium foil core. The membrane is extremely flexible for ease of installation and is robust enough to cope with site Technical Data conditions. SOLSHIELD Ultra Gas Barrier will also protect against damp and therefore will act as a DPM and satisfy Approved Document C. Typical areas where the membrane may be used are, coalfields, contaminated industrial sites, landfill &
Thickness
0.6mm
Width (m)
2.0 metres
Length (m)
50 metres
Roll Weight
35kg
Colour
Silver / Green
SOLSEAL Liquid Gas Barrier • • • • • • •
Fast drying properties for quick installation Waterproof and gas-proof membrane Single component (no primers) Can not be punctured as fully bonded Easily repaired by locally overcoating Methane, Carbon Dioxide and Radon Resistant An alternative to sheet membranes
Solseal Liquid Gas Barrier is a multi functional single component acrylic modified coating that can be applied as a waterproof and gas proof membrane to concrete, masonry and brick substrates, or as an alternative to sheet membranes in new construction.
Technical Data Packaging
20L Pail
Specific Gravity
1.40 (approx)
Application Temperature
Plus 4°C
Toxicity
Non – toxic
Solseal LGB can be applied by airless spray, roller or brush to walls, floors or soffits. www.bluebaybp.co.uk
Colour
Mid Grey
Coverage
1 Coat: >300g/m² 2nd Coat: 700g/m² st
Sales: 0845 450 9766
67
Solshield System Accessories
Gas Protection SOLSHIELD Gas System Accessories Technical Data
Solco QD Bitumen Primer is a quick drying liquid applied, low viscosity bitumen solution used to prime and seal porous substrates and promotes the adhesion of bituminous waterproofing systems prior to application of Solsheet Membranes. Solco HD Bitumen Protection Board is a tough, reinforced flexible bitumen modified board for the protection of adhesive waterproofing membrane and other types of waterproofing membranes against damage by backfill materials / poured concrete Solco XL Jointing / Reinforcing Tape is a self adhesive bitumen tape is used as reinforcing / over-banding tape for securing waterproofing and gas protection membranes at overlaps edge and corner details.
Approx Coverage
10m2/L
Technical Data Sheet Size
1.0m x 2.0m
Thickness
3mm / 6mm
Technical Data
Roll Length
Solco Foil Jointing Tape is a single sided tape for securing laps & joints. It can be used for bonding waterproofing and gas protection membranes at overlaps and for bonding membranes to DPC’s.
Solco Radon Sumps are used in full protection areas, where sub floor depressurisation may be required. Solcourse GR DPC is a bitumen free polymeric damp proof course resistant to Radon, Methane & CO2
Solco Top Hat Units are used for sealing around penetrations through gas membranes. Available in both flexible and rigid types. Solco Protection Fleece is intended to be used as a protection and/or separation layer against mechanical or chemical damage, and is used between the waterproofing membrane and overlying components Sales: 0845 450 9766
5, 25 & 205 Litres
Roll Width(s) 100 / 150 / 300mm
Solco Butyl Tape is a black double sided synthetic rubber based high performance butyl mastic tape. It can be used for bonding waterproofing and gas protection membranes at overlaps and for bonding membranes to DPCs, and fixing of other accessories such as top hats
68
Packaging Sizes
www.bluebaybp.co.uk
20m
Technical Data Roll Width
50 / 100mm
Roll Length
10m
Technical Data Roll Width
75mm
Roll Length
50m
Technical Data 430 x 430 x 220mm
Roll Widths
Length
300mm - 900mm
20m
Technical Data A range of various sizes avail.
Technical Data Roll Sizes
5.5m x 80m
Gas Protection
• • • • • • •
Easy application for both drainage and venting solutions Cost effective alternative to traditional methods Provides protection to tanking / gas membranes Prevents tracking of water between membrane Resistance to Hydrostatic head of water of 46m. Can be installed in damp conditions Can be applied immediately shutters are struck to wet surface/green concrete
SOLSHIELD Geocomposite drainage and venting mat is a cavity drain former manufactured from a dimpled H.D.P.E. core bonded to a nonwoven polypropylene geotextile filter membrane designed to provide a drainage / venting channel in floor and wall construction. Geocomposite drainage and venting mat may be used in floors and walls to provide a drainage / venting void beneath the concrete to relieve both water and gas pressures, suitable to provide grade 4 protection as defined in BS 8102: 1990. “Protection of structures against water from the ground”. The HDPE core provides high strength to resist the loads imposed by placing wet concrete. Geocomposite drainage and venting mat is designed to be placed with the geotextile filter layer facing the direction of water seepage or backfill.
Technical Data Roll Width
0.90m
Roll Length
50m
Thickness
25mm
Roll Weight
74kg
Solco Gas Venting Systems
SOLSHIELD Geocomposite Drainage & Venting Mat
Geocomposite drainage and venting mat can be applied against waterproofing membranes or directly against the masonry/concrete substrate .
Typical Gas Venting System Detail www.bluebaybp.co.uk
Sales: 0845 450 9766
69
Solco Gas Venting Systems
Gas Protection Gas Venting Dispersal Components (All pipes are available in twin wall)
SBP-001 ‘T’ Fitting 110mm & 150mm Ø,
SBP-005 Solid pipe 10mm Ø, for use with SBP-011
SBP-009 Vent outlet for use with SBP-015/17
SBP-013 Bollard Vent 110mm Ø
SBP-017 Extension Sleeve 550mm for use with periscope vent SBP-015
SBP-002 90° Bend 110mm & 150mm Ø,
SBP-006 Slotted Pipe 110mm Ø, x 1200mm
SBP-003 Coupler 110mm & 150mm Ø,
SBP-007 Carrier Pipe 110mm Ø x 6m
SBP-010 Slotted ‘T’ Connector 110mm Ø
SBP-011 Vent Outlet 110mm Ø
SBP-014 Air Brick 65mm x 215mm Various Colours
SBP-015 Periscope Vent
SBP-008 Vent pipe 50mm Ø
SBP-012 Vent Box Standard Gully & Half Gulley sizes available
SBP-016 Vent Adapter 110mm Ø for use with periscope or ext sleeve
SBP-018 Flexible Pipe
110mm Ø, x 1500mm
SBP-019 Round Gully Vent
70
SBP-004 End Cap 110mm & 150mm Ø,
Sales: 0845 450 9766
www.bluebaybp.co.uk
SBP-020 Rectangular Gully Vent
