Transcript
GATE OPERATORS, ACCESSORIES AND ACCESS CONTROL SYSTEMS
U.S. PRICE LIST
COVERTO BE PROVIDED
EFFECTIVE APRIL 18, 2011
TABLE OF CONTENTS
General Information Terms and Conditions.................................................................................................. 4 Safety Information....................................................................................................... 6 Designing Automated Vehicular Gate Systems............................................................. 8 How to Order............................................................................................................. 10
Gate Operator Section Actuator Gate Operators............................................................................................ 13 Swing Gate Operators................................................................................................ 23 Slide and Overhead Gate Operators........................................................................... 37 Barrier Gate Operators............................................................................................... 61 Modifications.............................................................................................................. 70 Solar Cycle Charts..................................................................................................... 72
Gate Accessory Section.............................................................................. 75 Access Control Section Stand-Alone Access Controls................................................................................... 109 Telephone Entry Systems........................................................................................ 115 Access Control Accessories..................................................................................... 135
3
terms and conditionS OF SALE
terms and conditionS OF SALE
Controlling Provisions
Limited Warranty
Force Majeure
The following terms and conditions, as they may be modified by The Chamberlain Group, Inc. (“Seller”) from time to time, shall apply to all products sold by Seller to buyer (“Buyer”). Unless written notice of objection to any of such terms and conditions (including inconsistencies between Buyer’s purchase order and Seller’s acceptance of such purchase order) is given by Buyer to Seller promptly on receipt of acknowledgment, Buyer agrees that such terms and conditions shall become part of the purchase contract between Buyer and Seller. Seller’s acknowledgment shall operate as Seller’s acceptance of Buyer’s purchase order, but such acceptance is made expressly conditional on assent by Buyer to the terms and conditions included therein. Buyer and Seller agree that Seller’s acknowledgment, including the following terms and conditions, shall constitute the complete and final agreement between Buyer and Seller in respect of such order (except as may otherwise be agreed in writing between Buyer and Seller). None of the terms and conditions contained herein may be added to, modified, superseded or otherwise altered except by a written instrument signed by an authorized representative of Seller and delivered by Seller to Buyer, and the products received by Buyer from Seller shall be deemed to be delivered only upon the terms and conditions contained herein, except as they may be so added to, modified, superseded or otherwise altered.
Seller warrants to the first purchaser of a product, for the structure in which a product is originally installed, that it is free from defect in materials and/or workmanship for the following period (measured from the date of shipment):
In the event Seller’s performance hereunder is limited or prevented in whole or in part by acts of God, fire, war, civil disorders, strikes, explosions, embargoes, accidents, epidemics, floods, storms, shortages or failure of any source of supply or transportation upon which Seller is dependent, or by any rule, regulation, order or other action taken by any governmental authority or causes not reasonably within Seller’s control whether or not specifically provided herein, Seller shall be excused, discharged and released of performance to the extent such performance is limited or prevented without liability for damages of any kind. Nothing herein contained shall be construed as requiring Seller to accede to any demands of labor or labor unions, suppliers or other parties which Seller considers unreasonable. If by reason of any of the aforesaid circumstances Seller’s supply of any of the goods shall be insufficient to meet all of Seller’s requirements hereunder, Seller’s orders with its customers and for Seller’s own uses, Seller shall have the right at Seller’s option and without liability hereunder to apportion Seller’s available supply of products among any and all of Seller’s customers, including Seller’s affiliates and itself, in such manner as Seller in Seller’s sole discretion considers equitable.
Quotations All written quotations automatically expire unless accepted within thirty (30) days from the date quoted unless otherwise noted. Verbal quotations expire the same day they are made. All quotations are subject to approval by an authorized representative of Seller. All stenographic and clerical errors are subject to correction.
Prices and Terms of Payment Payment terms are net thirty (30) days (provided that a 1% discount shall be applied to balance if payment is made within twenty (20) days of the date of the Seller’s invoice) or such other terms in effect at the time of shipment as otherwise indicated within the invoice. All due dates are calculated from date of invoice. Prices are subject to change without notice to reflect Seller’s prices, and applicable freight or transportation rates, in effect as of the date of shipment. Note: All prices are in U.S. dollars.
Taxes Prices specified do not include sales, excise or other taxes payable on account of this transaction. All such taxes in effect and/or hereafter levied which are applicable to this transaction are in addition to such prices and shall be paid by the Buyer.
Shipment Shipment will be F.O.B. Seller’s facility. Scheduled or stipulated shipping dates are approximate and based upon prompt receipt of all necessary information from Buyer. If shipment is delayed at the request of, or due to acts or omissions by Buyer, Seller shall have the right to store the goods at a place of Seller’s choice at Buyer’s risk and expense. Title to and risk of loss of the goods shall pass to Buyer upon delivery to common carrier at the F.O.B. point, subject to any applicable lien right of Seller. It is Buyer’s responsibility to file any shortage or damaged goods claims with the common carrier.
Cancellation and Termination Special orders may not be cancelled at any time. Any other order may be cancelled by Buyer only upon written notice to Seller and upon payment to Seller of cancellation charges, which shall include (i) full payment for all goods finished and unpaid for as of the date of Seller’s receipt of Buyer’s written notice and (ii) twenty percent (20%) of the final net price of the remaining quantity of goods ordered but not finished. Payment of any cancellation charges shall be made within thirty (30) days from date of invoice. Seller shall have the right to cancel any order at any time, upon written notice, for any breach by Buyer of the terms of such order (including these terms and conditions), and Seller shall be entitled to collect cancellation charges as identified above. Buyer shall have the right to cancel any order at any time, upon written notice, of any material breach by Seller of the terms of such order (including these terms and conditions). No termination by Buyer for default shall be effective unless and until Seller shall have failed to correct such alleged default within thirty (30) days after receipt by Seller of the written notice specifying such default.
4
Product Family SL3000, CSW, HCT
Description Warranty Gate Operators
RSL, RSW
Gate Operators
3
Miracle-One™, LA, SW, MSW, MSL, MSLX, SL, BG, MA, MAT, MAS, MAST, HS, VSL
Gate Operators
2
LA100
Gate Operators
1
Gate Accessories
Gate Accessories
1
Battery for Battery Backup Operators
Gate Accessories
1
MINIkey, Passport™ Stand-Alone, Wireless Keypad/Push Button
Access Control System
1
EL25, EL2000, TAC Family, Infinity
Telephone Entry System
1
Dial Code®, Icon26™
Telephone Entry System
3
Passport™ Receiver
Radio Receiver
3
Governing Law
Access Control Accessories
Access Control Accessories
1
Any order for products and these terms and conditions shall be governed by, and interpreted in accordance with, the laws of the State of Illinois, U.S.A. notwithstanding any conflict of laws principles thereof. The parties agree that the courts of the State of Illinois and/or the United States District Court for the Northern District of Illinois shall have exclusive jurisdiction over any litigation arising between the parties, and the parties hereto hereby agree to submit themselves to the personal jurisdiction of said courts.
Years 5/7
The proper operation of a product is dependent on Buyer’s compliance with the instructions regarding installation, operation, maintenance and testing. Failure to comply strictly with those instructions will void this warranty in its entirety. If, during the limited warranty period, the product appears to contain a defect covered by this limited warranty, call 800-528-2806 before dismantling the product. Then send this product, pre-paid and insured, to Seller’s service center for warranty replacement. Buyer will be advised of shipping instructions when you call. Please include a brief description of the problem and a dated proof-of-purchase receipt with any product returned for warranty replacement. Products returned to Seller for warranty replacement, which upon receipt by Seller are confirmed to be defective and covered by this limited warranty, will be replaced at no cost to Buyer and returned pre-paid. Defective parts will be replaced with new or factory-rebuilt parts at Seller’s sole option.
Assignment No assignment of any right or interest or delegation of any obligation or performance of Buyer hereunder may be made without the prior written consent of Seller. Any attempted assignment or delegation will be wholly void and totally ineffective for all purposes.
Waiver Any waiver by Seller of any breach or default by Buyer of any of Buyer’s obligations hereunder, and any failure by Seller to enforce any rights arising hereunder, shall not be construed as a waiver of any other breach or default by Buyer or of Seller’s right to enforce its rights arising hereunder in any other circumstances.
This limited warranty is in lieu of any other warranties, express or implied, including any implied warranty of merchantability or fitness for a particular purpose or otherwise, and of any other obligations or liability on Seller’s part. This limited warranty does not cover non-defect damage, damage caused by improper installation, operation or care (including, but not limited to abuse, misuse, failure to provide reasonable and necessary maintenance, unauthorized repairs or any alterations to the product), labor charges for reinstalling a repaired or replaced unit, problems related to interference, or replacement of batteries. Under no circumstances shall Seller be liable for consequential, incidental or special damages arising in connection with use, or inability to use, the product. In no event shall Seller’s liability for breach of warranty, breach of contract, negligence or strict liability exceed the cost of the product covered hereby. No person is authorized to assume for Seller any other liability in connection with the sale of the product. Some states do not allow the exclusion or limitation of consequential, incidental or special damages, so the above limitation or exclusion may not apply to Buyer. This limited warranty gives Buyer specific legal rights, and Buyer may also have other rights which vary from state to state.
Remedies In case Buyer fails to make payments in accordance with the terms set forth herein, Seller, in addition to its other rights and remedies, may, at its option, defer further shipments until such payments are made, or may terminate the order, and Buyer shall not have any cause of action or be entitled to any offset, counterclaim or recoupment against Seller by reason of any such action. Buyer agrees to pay any legal fees which may be necessary to effect collection.
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
5
For the purposes of this Safety Information, an automated gate system consists of a vehicular gate, an electric gate operator, control equipment to interface with the gate operator, and safety equipment to protect people and property.
Vehicular Gates A vehicular gate is a large, heavy object that moves with the help of an electric motor. A moving gate can cause SERIOUS INJURY OR DEATH! The safety and well-being of others depends on the design of a safe system. The gate itself must be properly installed, work freely and smoothly in both directions, and be constructed to industry standard ASTM F2200. Gate operators are not intended for pedestrian use.
Gate Operator Selection The proper gate operator must be selected for the application. Pay attention to all application information in this catalog, including gate type, size, voltage, and control wiring. IMPROPER SELECTION CAN RESULT IN A DANGEROUS SYSTEM. Be sure you understand the application and limitations of the model gate operator you select for your gate. If you are in doubt, contact a LiftMaster representative.
Control Accessories Gate operators can present serious hazards to persons in the immediate area when not controlled in a safe manner or by responsible persons. Choose one or more controls that together will allow complete control of the gate. All controls should be located OUT OF REACH OF SMALL CHILDREN. SERIOUS INJURY OR DEATH CAN RESULT FROM CHILDREN PLAYING WITH CONTROLS. ALL CONTROLS SHOULD BE LOCATED NO LESS THAN 6' FROM ANY MOVING PART OF THE GATE SO THAT THE PERSON OPERATING THE CONTROLS CAN SEE THE FULL AREA OF GATE MOVEMENT, but should not be so close that a person starting the gate could be injured due to their proximity to the gate. Be especially careful in designing systems with automatic controls, that is, controls that can cause the gate to operate without warning to persons in the immediate gate area. Such controls include, but are not limited to, radio controls, remote mounted access controls, telephone access systems, and timing devices. SAFETY EQUIPMENT AND SIGNS WARNING OF THE AUTOMATIC OPERATION ARE A MUST IN THE DESIGN OF SUCH A SYSTEM.
1. POWER SHOULD ALWAYS BE DISCONNECTED whenever installing, wiring, or servicing a gate operator or automated gate system. Not only is the chance of electric shock thus reduced, but the MOVING CHAINS IN MOST GATE OPERATORS CAN CATCH CLOTHING OR FINGERS AND CAUSE SEVERE INJURY. 2. Installation and wiring must be in compliance with local building and electrical codes. If no local code exists, install in compliance with the National Electrical Code. 3. All manual gate locks should be disabled to avoid damage to the gate or operator should the lock become engaged after the operator is installed.
Operated Gate Systems to Comply with UL325 and ASTM F2200 • Only install the operator on gates used for vehicular traffic. • Install entrapment protection devices such that both primary and secondary devices protect all entrapment zones. • A separate pedestrian entry/exit must be clearly visible to promote pedestrian usage. It must be located so persons do not come in contact with the vehicular gate while it is moving. • Refer to your operator's Instruction Manual for full details
Swing Gate User controls mounted at least 6 ft. away from gate
Public Side
A Pedestrian gate clearly located
4. Clutches should be adjusted to the minimum force setting required to operate the gate smoothly, and still allow slippage with minimum force. However, A CLUTCH IS NOT INTENDED AS, AND SHOULD NOT BE SUBSTITUTED FOR, A SAFETY DEVICE TO PROTECT PEOPLE AND PROPERTY.
Photo eye (public side)
R
9. Moving gates have pinch points and entrapment zones that can be extremely dangerous to pedestrians, especially small children. EVEN THOUGH YOU ARE PLANNING TO USE SAFETY EQUIPMENT, THESE POINTS AND ZONES SHOULD BE GUARDED. See below for recommendations on guarding against some of the more common hazards. If you are unsure about your ability to identify the particular hazards of your gate system, call LiftMaster for assistance. UNGUARDED PINCH POINTS AND ENTRAPMENT ZONES CAN CAUSE SERIOUS INJURY OR DEATH!
Safety Accessories IT IS A REQUIREMENT THAT SAFETY EQUIPMENT BE USED WITH EVERY GATE OPERATOR. There are many types of safety devices available; sensing edges and photo-electric controls are some of the more common types of entrapment protection devices shown in the SAFETY ACCESSORIES section of this catalog. Audible and/or visible warning devices are recommended when automatic controls are used in the gate operating system. A variety of warning signs and labels are also offered in this section. WITHOUT SAFETY EQUIPMENT THE GATE COULD CAUSE SERIOUS INJURY OR DEATH!
N ME AP
If space is less than 16" (41cm), entrapment protection in this area is required.
B
Closed Gate With the hinge mounted on the corner of the pilaster, the entrapment area A is eliminated and protection is not required for this area.
(ASTM F2200: 7.1.1.1 and 7.1.1.2)
Slide Gate Pedestrian gate clearly located
User controls mounted at least 6 ft. away from gate
Public Side
Base of Swing and Slide Gate All Gates must have smooth bottom edges, no protrusions should exist. If gate hardware or sensors protrude, they must have smooth surfaces free of any sharp cutting edges that do not exceed ½ inch beyond the base of the gate. (ASTM F2200: 4.8)
6 ft. (1 .8m) minim um Attach WARNING signs on both sides of the gate
OK
Not Allowed
Guard posts Non-pinch rollers (4x)
See “Slide Gate Openings”
V track (gate rail)
Physical stop
Photo eye (4x)
Edge sensor on Leading Edge of gate
Edge sensor
on Trailing Edge of gate
See “Slide Gate Openings”
te d Ga Han Left ing open
NT
ME
AP NTR
Slide Gate Gaps
E
ZON
E
Photo eye (entrapment protection shown in four locations) Physical stop - weld stops at both ends of gate rail.
Secure Side
Slide Gate Openings
A gap, measured in the horizontal plane parallel to the roadway, between a fixed stationary object nearest the roadway (such as a gate support post) and the gate frame when the gate is in either the fully open position or the fully closed position, shall not exceed 2 ¼ in. (57mm). Exception: All other fixed stationary objects greater than 16 in. (406mm) from the gate frame shall not be required to comply with this section. (ASTM F2200: 6.1.4)
Openings of a horizontal slide gate must be smaller than 2 1/4" (57mm) or else be guarded or screened. These design rules apply to both the moving gate as well as the portion of adjacent fence that the gate covers in the open position. (UL325: 56.8.4.a.2 and ASTM F2200: 6.1.2) See Illustrations below.
XXX
Gate Frame and Adjacent Fence Area
If gaps (xxx) between vertical bars of the gate or fence are less than 2 1/4" (57mm), no further screening is required.
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
Reflector for photo eye
Secure Side
X X X X X X X X X X X XX X X
6
NT APME ENTR NE ZO
Edge sensor
Attach WARNING signs on both sides of the gate
7. The operator, controls, and safety equipment should be tested at the conclusion of the installation to be sure they are functioning properly.
A
If space is greater than 4" (10cm), entrapment protection in this area is required.
ZONE
T
T EN
6. All warning signs and warning labels are required to be posted as indicated in the gate operator installation manual, and over the protest of the property owner.
B
Photo eyes
5. The manual operation system must be functioning properly. IF THE GATE CANNOT BE MANUALLY OPERATED IN AN EMERGENCY, SERIOUS INJURY OR DEATH MAY RESULT!
8. The operation of the gate, controls, and safety equipment should be reviewed with the owner and/or end user of the automated gate system. They should also be informed of the need to maintain control and safety equipment on a regular basis. Safety equipment should be checked at least once monthly to ensure that it is working properly. All installation manuals, instructions, and safety information should be left with the owner.
Closed Gate
Opened Gate
Automated Gate Systems
Gate operators and associated control equipment should only be installed and serviced by qualified professionals. Professional installers should observe the following safe installation procedures. To ensure that this is the case, provide a copy of this Safety Information Section to the installer.
Opened Gate
The following should be read by anyone involved in the design, specification, selection, or purchase of an industrial gate operator or automated gate system.
Safe Installation Procedures
Gate Frame and Adjacent Fence Area
6 ft. (1.8m) minimum
WARNING
safety information
6 ft.(1.8m) minimum
safety information
For gaps (xxx) equal to or larger than 2 1/4" (57mm), a wire mesh screen must be applied to the gate. Wire mesh screen openings must be smaller than 2 ¼" (57mm). The minimum height of wire mesh screen: 6 ft. (1.8m).
7
designing automated vehicular gate systems An automated vehicular gate system includes several components, all of which must be selected in concert with each other and with the requirements of the job if the system is to be successful. In addition to the gate itself, a system consists of a gate operator, entry control equipment to interface with the operator, and safety equipment to protect people and property from hazards of an electrically powered gate.
Note: A single cycle is considered one full open and closing. The number of cycles is considered the number of times the open limit is actuated in one hour.
1
GATE OPERATOR MODEL SELECTION - The gate operator models described in this catalog are grouped according to the type of gate for which they are intended to be used and the expected frequency of usage.
Operator Type - It is important to select the proper type and size of gate operator for your gate. Remember, mismatch between gate and operator can result in a malfunctioning or dangerous system. We also offer an extensive array of operator modifications for those instances where a standard machine is not the right choice. Consult the Application Section if you feel unsure about the application of any standard machine, or contact a sales representative. Operator Size - This catalog uses gate width charts to aid in the proper sizing of an operator. However, it should be noted that these charts are only estimates and can vary greatly between applications. Operator Usage - Both the gate and the gate operator must be designed to stand up to the intended usage of the system. A gate that opens 25 times an hour cannot use an operator designed for more limited duty cycles.
designing automated vehicular gate systems
Photo-electric units are also very common in residential, commercial, or industrial installations. For more information on these devices, consult a representative. Other types of safety accessories that are offered include audible or visible warning devices to warn of a moving gate or one that is about to start moving. Finally, all installations are required to have Warning Signs in place to warn pedestrians of the dangers of operating vehicular gates. Many signs and labels are included with each operator. These should be carefully placed according to the accompanying instructions. Additional or replacement signs are offered in the Accessories Section.
NOTE: Please review application with requirements of UL325 and ASTM F2200 to ensure a proper installation.
4
GATE OPERATOR CLASSIFICATIONS - There are four gate operator classifications. Class I is considered the most stringent class achievable and can be used in all of the other classes of installation.
Class I: Residential A gate operator intended for use in a home. A home is defined as a one to four single family dwelling, or a garage or parking area associated therewith. Class II: Commercial or General Public Access A gate operator intended for use in a commercial location. Commercial locations include: gated communities, hotels, garages, retail stores or other buildings that service the general public. Class III: Industrial or Limited Access
Generally speaking, operators that utilize worm-gear reduction systems will stand up to severe usage much better than belt-reduced operators. Continuous-duty motors driven by magnetic reversing contactors will last longer than limited-duty motors with relay drives.
A gate operator intended for use in an industrial location. Industrial locations include: factories, loading dock areas or other locations not intended to service the general public.
2
A gate operator intended for use in a guarded industrial location. Guarded industrial locations include: airport security areas or other restricted access locations not servicing the general public, in which unauthorized access is prevented via supervision by security personnel.
ENTRY CONTROL DEVICES - LiftMaster® offers a wide variety of entry control devices that are compatible with the gate operators. These entry control devices may be found in this Price Book. Most entry control devices require a choice to be made between convenience and security. Push buttons are easy for just about anyone to use, but that is precisely why they may be undesirable in certain installations. Key control stations are a popular alternative, requiring the use of a key to open or close the gate. Another commonly used device is the card reader, similar to key controls in style in that the user must carry something to gain access through the door. However, access control and telephone entry systems that use card readers offer the added advantage of being able to issue many different cards to different users or different classes of users, cards which can be easily invalidated when necessary. A somewhat different approach is achieved by using digital keypads, which offer a comparable degree of security and flexibility to card readers, but which do not require the user to carry anything. However, he or she must remember the four or five digit entry code to use the keypad. Very often gates will be operated primarily by people in vehicles. When this is the case radio controls and other outdoor, pedestal-mount control devices are desirable. Automatic controls can be used when conditions dictate. The most common of this type is the auto-close timer, which will cause the gate to close automatically after a preset time interval whenever it is left open. Another variety is the 7-day time clock which can be programmed to open the gate automatically at different times of the day.
3
SAFETY ACCESSORY SELECTION - All gate operators will accept safety accessories to protect vehicles and equipment from motorized gates. One of the best choices for safety equipment is a sensing edge, commonly called a safety edge. One or more of these is strongly recommended on all motorized gates, but primarily on slide gates. The edge mounts on leading edges of the gate and on stationary fence posts and must be wired into the control box of the operator. If the gate strikes an obstruction while opening or closing, the sensing edge will compress and either cause the gate to stop or reverse depending on the connection to the operator.
Class IV: Restricted Access
Gate Operator Entrapment Swing & Gate Barrier (Arm) Operator
Slide Gate Operator
UL325 Installation Class
Primary Type
Secondary Type
Primary Type
Secondary Type
Class I & II
A
B1, B2 or D
A or C
Class III
A, B1 or B2
Class IV
A, B1, B2 or D
A, B1, B2, C or D A, B1, B2,C, D or E A, B1, B2,C, D or E
A, B1, B2, D or E A, B1, B2, D or E
A, B1, B2 or C A, B1, B2, C or D
What are the obstruction sensing types? There are six types of obstruction sensing systems.
Control Wiring Max. Distance (Ft.)
Wire Gauge
1000
18
1200
16
2000
14
Formula L = (V) x (D) (2K) x (I) L = Maximum one-way distance V = Voltage drop (5%) D = Cross-section area of conductor (diameter) K = Resistivity of conductor (ohms) I = Motor F.L.A. (running)
Wire Gauge
Diameter
Ohms/1000 Ft.
16
1/20"
4Ω
14
1/16"
2.5Ω
12
1/12"
1.6Ω
10
1/10"
1Ω
8
1/8"
0.6Ω
Type A: Inherent obstruction sensing system, self-contained within the operator. This system must sense and initiate the reverse of the gate within two seconds of contact with a solid object. Type B1: Connections provided for a non-contact sensor. A non-contact device such as a photo-eye can be used as a secondary protection.
Power Wiring
Type B2: Connections provided for a contact sensor. A contact device such as an edge device can be used for secondary protection.
Wiring specifications can be found in applicable gate operator owner’s manual.
Type C: Inherent adjustable clutch or pressure relief valve. Type D: Connections provided for a control requiring continuous pressure to open and close the gate.
NOTE: Calculated using NEC guidelines. Local codes and conditions must be reviewed for suitability of wire installation. Primary/Secondary units must be installed on separate circuits.
Type E: Built-in audio alarm. Examples include sirens, horns, or buzzers.
8
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
9
HOW TO ORDER
LiftMaster® AC Operators Building a Model Number Four (4) selections must be made to specify each gate operator model.
1
Select the proper model type for your gate based on your gate type. A brief description of the gate type(s) for which a model is intended to be used is included at the beginning of each model page. If you are not sure of the proper model for your gate, refer to the discussion on page 8, “Designing Automated Vehicular Gate Systems,” or contact a Customer Service Representative.
4
Select the control wiring type from the individual operator pages of this catalog. The control wiring type is designated by a 1 or 2 digit alpha-numeric code and will become the fourth and final part of the model number.
Example: SW 470 50 11 G3
The LiftMaster identifier and model type will become the first part of the complete model number.
Additional Information Required
Example: SW 470
2. Please list any Modifications, Accessories, and Omissions as separate line items.
1. On all orders, please specify the gate TYPE and WIDTH. 3. Please indicate any markings required on packing cartons.
2
Select the horsepower rating of your operator by studying the recommended capacities guide for the model type you have chosen. This guide is based on the overall area of the gate and is a general guideline only for new and properly installed gates. If your gate size is beyond the range on the guide for one of these models, go to the standard-duty or heavy-duty operator of the same type.
NOTE: Not all gate operators come in all horsepowers and voltages listed on this page. Consult the individual operator pages of this catalog for specifics.
The ORDERING CODE for horsepower rating is as follows: 1/3 HP 33 1/2 HP 50 1 HP
100
2 HP
200
The horsepower rating code will become the second part of the model number.
Example: SW 470 50
3
Select the voltage and phase according to your installation requirement. The power available at the jobsite must be of the same voltage, phase, and frequency as ordered for the operator. A MISMATCH CAN CAUSE A DANGEROUS SITUATION AND RESULT IN DAMAGE TO THE OPERATOR AND/OR INSTALLATION POWER SUPPLY. The ORDERING CODE for voltage, phase, and frequency is as follows: 115VAC, 1Ø, 60Hz
11
230VAC, 1Ø, 60Hz
21
208VAC, 1Ø, 60Hz
81
208VAC, 3Ø, 60Hz
83
230VAC, 3Ø, 60Hz
23
460VAC, 3Ø, 60Hz
43
575VAC, 3Ø, 60Hz
53
The voltage, phase, and frequency code will become the third part of the model number.
Example: SW 470 50 11
10
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
11
TABLE OF CONTENTS
LA 100
Light-Duty Residential DC Actuator Gate Operator......................... 14
LA 400
Residential DC Actuator Gate Operator........................................... 16
LA 412
Solar-Powered Residential DC Actuator Gate Operator................... 18
Miracle-One™
Residential/Light Commercial DC Actuator Gate Operator............... 20
ACTUATOR GATE
ACTUATOR GATE OPERATORS
13
LA 100 Light-Duty Residential DC Actuator Gate Operator
operators Model LA100 1PKG
Residential-duty DC motor provides exceptional starting torque and features soft start/soft stop operation. This promotes longer gate and operator life, as well as dependable performance. The LA100 is capable of operating gates up to 12 ft. long and weighing up to 250 lbs.
Description Single Arm Package. Actuator Arm and Control Box capable for single swing gate applications. Includes standard mounting hardware and one 3-button Security+® remote control.
Quantity Column Pricing 1-11 $239.00 12+ $232.00 (gate multiplier does not apply)
ACTUATOR GATE
ACTUATOR GATE
DC-Powered Residential Gate Operator
ORDERING
1-YEAR WARRANTY OPTIONS
Standard Features • On-Board 315MHz Radio Receiver – Add up to 9 remotes • DC Operator System • Slow Start/Stop
Only the LiftMaster ® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
Model 50-220
Description List Price The Protector System® Safety Sensors....................................................................................$83.00 UL listed, photo-eye hood/bracket combo included. Compatible with LA100, LA412, RSL and RSW operators
WKP5LM3
Wireless Access Control Keypad............................................................................................$161.00* 5-code configuration
50-220
*Pricing subject to access control discount; gate multiplier not applicable.
• Inherent Obstructing Sensing • External Obstructing Sensing
Recommended Capacities
• Control Inputs • Timer-to-Close
350 lbs.
• LED Indicators
250 lbs.
• Electronic Limit System
150 lbs.
• Manual Release
WKP5LM3
Cycles per day - 20
0
350 250
10 ft.
12 ft.
Optional Features • Transmitters and Keypads • Photo-Eyes
TECHNICAL INFORMATION 3"
5.29"
25.59"
9"
7"
Shipping Weight: Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
14
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
Actuator Arm: 8 lbs. Control Box: 2 lbs. LA100 Package: 20 lbs.
15 25.59"
LA 400 ORDERING
24VDC-Powered Residential and Light Commercial Actuator Gate Operator
Model LA400 1PKG
Description List Price Single Arm Package..............................................................................................................................................................$1,251.00 Includes Single Arm, Standard Control Box and (2) 7Ah Batteries
Powerful 24VDC motor provides exceptional starting torque and features soft start/stop operation. This promotes longer gate and operator life, as well as dependable performance. The LA400 is capable of operating gates up to 16 ft. long and weighing up to 550 pounds. This model is UL325-compliant for Class I, II, III and IV.
LA400 1PKG XL
XL Single Arm Package.........................................................................................................................................................$1,459.00 Includes Single Arm, XL Control Box and (2) 7Ah Batteries
Control Boxes
Packages
2-YEAR WARRANTY
Standard Features • On-Board 315MHz Radio Receiver – Add up to 50 remotes • DC Operator System • Battery-Run System
• External Obstructing Sensing • Control Inputs
Standard 12VDC Control Box for single and dual gate applications.......................................................................................$602.00 (batteries included)
LA400CONT XLM
XL Metal 12VDC Control Box for single and dual gate applications.......................................................................................$824.00 (batteries sold separately)
Actuator Arms
Only the LiftMaster® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
• Slow Start/Stop • Inherent Obstructing Sensing
LA400CONT
XL Control Box – LA400CONT XLM
LA400
Primary 12VDC Actuator Arm for single gate applications.....................................................................................................$661.00
LA400-S
Secondary 12VDC Actuator Arm for dual swing gate applications..........................................................................................$713.00 (40' cable and junction box included)
LA400-JB40
40' Connecting Cable and Junction Box for dual gate applications.........................................................................................$72.00 (compatible with LA400 or LA412 systems)
Accessories
• Double the interior room of a standard control box
CPS-UN4 LiftMaster® Commercial Protector System®...........................................................................................................................$202.00 Thru-beam photo-eyes, 45 ft. sensing distance, NEMA 4
• Timer-to-Close
• Large, powder coated, weather-resistant metal control box
LD7LP LiftMaster® 10-30 VAC/DC Low Power Loop Detector, <2mA idle current draw......................................................................$234.00
• LED Indicators
• Hinged cover with option to secure with padlock
CP3
6-31VAC or 10-40VDC Low Power One-Piece Sensing Probe, 100 ft. lead wire.......................................................................$334.00
• Electronic Limit System
• (2) 115V outlets simplify powering accessories
• Bi-Part Delay
GC836-24
24VDC Two-Piece Sensing Probe, adjustable sensitivity, 50 ft. lead wire...............................................................................$315.00
• Space available for (2) 7Ah batteries
• Keyed Manual Disconnect
WKP5LM3
Wireless Access Control Keypad, 5-code configuration.......................................................................................................... $161.00*
• Built-in standoffs to mount (3) LiftMaster® LD7LP loop detectors (loop detectors sold separately)
50-19503
Push-to-Open Bracket (allows the gate to swing away from the property)..............................................................................$47.00
GPINLCK
Gate Pin Lock. Locks control arm to gate bracket (fits gate bracket side)...............................................................................$39.00
Recommended Capacities
GC824-12
12-24 VAC/DC Solenoid Lock, 2,000 lb. holding force.............................................................................................................$555.00
Optional Features • U-Bolt Mounting Kits • Transmitters and Keypads • Solenoid Lock/Maglock • Loop Detectors • Photo-Eyes • Sensing Edges • XL Control Box
850
850 lbs.
Cycles per day - 100 650
650 lbs.
550
550 lbs. 0
*Pricing subject to access control discount; gate multiplier not applicable.
TECHNICAL INFORMATION
750
750 lbs.
ACTUATOR GATE
ACTUATOR GATE
Residential DC Actuator Gate Operator
10 ft.
12 ft.
14 ft.
OPERATOR AMP RATING (RUNNING) VAC
1/3 HP
115-1Ø
6.5
16 ft.
voltage pHASE 60 HZ
Battery Backup Operation: 180 Cycles (10 ft./850 lbs. swing gate)
Standard Control Box
XL Metal Control Box Shipping Weight:
Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
16
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
Actuator Arm: 25 lbs. Standard Control Box: 25 lbs. XL Control Box: 31 lbs.
17
LA 412 ORDERING
Solar-Powered Residential Gate Operator
10-Watt Packages Model
Description
Solar-powered gate operator with EverCharge® technology – utilizes innovative technology to deliver power when needed most for opening your gate and minimizes power consumption at all other times for best solar performance. DC motor provides soft start/stop operation. This promotes longer gate and operator life, as well as dependable performance. The LA412 is capable of operating gates up to 16 ft. long and weighing up to 550 lbs. This model is UL325-compliant for Class I.
LA412 1PKG
Single Arm Package.............................................................................................................................................................. $1,615.00 Includes Single Arm, Standard Control Box, 10W 12V Solar Panel and (2) 7Ah Batteries
LA412 1PKG XL
XL Single Arm Package, 7Ah................................................................................................................................................. $1,823.00 Includes Single Arm, XL Control Box, 10W 12V Solar Panel and (2) 7Ah Batteries
LA412 1PKG XLB
XL Single Arm Package, 33Ah............................................................................................................................................... $1,969.00 Includes Single Arm, XL Control Box, 10W 12V Solar Panel and (1) 33Ah Battery
2-YEAR WARRANTY
LA412 1PKG XL20
XL Single Arm Package, 7Ah................................................................................................................................................. $1,945.00 Includes Single Arm, XL Control Box, 20W 12V Solar Panel and (2) 7Ah Batteries
LA412 1PKG XLB20
XL Single Arm Package, 33Ah............................................................................................................................................... $2,092.00 Includes Single Arm, XL Control Box, 20W 12V Solar Panel and (1) 33Ah Battery
Standard Features • On-Board 315MHz Radio Receiver – Add up to 50 remotes • DC Operator System • EverCharge® Power Management System
20-Watt Packages
Only the LiftMaster® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
Control Boxes
• Slow Start/Stop • Inherent Obstructing Sensing • External Obstructing Sensing • Control Inputs
List Price
LA412CONT
Standard 12VDC Control Box for single and dual gate applications (batteries included)......................................................$702.00
LA412CONT XLM
XL Metal 12VDC Control Box for single and dual gate applications (batteries sold separately).............................................$878.00
Actuator Arms
XL Control Box – LA412CONT XLM • Double the interior room of a standard control box
LA412
Primary 12VDC Actuator Arm for single gate applications.....................................................................................................$716.00
LA412-S
Secondary 12VDC Actuator Arm for dual swing gate applications..........................................................................................$716.00 (40' cable and junction box included)
• Timer-to-Close
• Large, powder coated, weather-resistant metal control box
• LED Indicators
• Hinged cover with option to secure with padlock
• Electronic Limit System
• Space available for (2) 7Ah or (1) 33Ah battery
• Bi-Part Delay
• Built-in standoffs to mount (3) LiftMaster® LD7LP loop detectors (loop detectors sold separately)
OPTIONS
Optional Features
Solar Panels
50-220*
• U-Bolt Mounting Kits
Additional panels may be required depending on single or dual gate application, geographical location, number of cycles per day and accessories used. Refer to the Solar Cycle Charts section of this book or LiftMaster.com for more details.
LD7LP* LiftMaster® 10-30 VAC/DC Low Power Loop Detector, <2mA idle current draw......................................................................$234.00
Recommended Capacities*
• Keyed Manual Disconnect
• Transmitters and Keypads • Low Power Accessories Recommended • Solenoid Lock • Loop Detectors • Photo-Eyes • Sensing Edges • XL Control Box
750
550
550 lbs.
12 ft.
14 ft.
*Varies by number of solar panels, accessories or region
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
10-Watt 12V Solar Panel.........................................................................................................................................................$350.00
SOLPNL20W12V
20-Watt 12V Solar Panel.........................................................................................................................................................$468.00 The Protector System® Safety Sensors. UL listed, hood/bracket combo included, compatible with LA412..............................$83.00 Works in conjunction with Power Management System to save power
CP3*
6-31VAC or 10-40VDC Low Power One-Piece Sensing Probe, 100 ft. lead wire.......................................................................$334.00
50-19503
Push-to-Open Bracket (allows the gate to swing away from the property)..............................................................................$47.00
BIGBTYKT
Provides extended power reserve. Accommodates 80Ah 12V battery (battery sold separately)...............................................$127.00
TECHNICAL INFORMATION Shipping Weight:
650
10 ft.
SOLPNL10W12V
SGLOCK12V* LiftMaster® Solenoid Lock. Works in conjunction with Power Management System to save power.........................................$317.00
Cycles per day see daily cycle chart
650 lbs.
0
Solar Panels
*Low power draw accessories recommended to maximize cycles when running on battery backup or solar power.
850
850 lbs. 750 lbs.
18
ACTUATOR GATE
ACTUATOR GATE
Solar-Powered Residential DC Actuator Gate Operator
Actuator Arm: 25 lbs. Standard Control Box: 25 lbs. XL Control Box: 21 lbs.
16 ft. Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
Standard Control Box
XL Metal Control Box
19
MIRACLE-ONE™ Residential/Light Commercial DC Actuator Gate Operator
The New Standard in Residential Gate Operators
packages
ACTUATOR GATE
• Improved Noise Filter • Improved Limit Switch System
• Variable Speed, 24VDC • Battery Backup (batteries included) • 600 Pounds of Torque for Exceptional Power • Built-in Radio Receiver Compatible with Security+® Remote Controls • Ultra-Quiet Operation
• Compact Modern Design • Emergency Key Release • ERD and Alarm Included
Dual Gate Package Model MIR2PKG3 The Miracle-One™ is available in a primary/secondary package which includes a cable extension kit consisting of 40 ft. of direct burial wire, junction box and connecting hardware. For use in applications where two gate operators are needed.
Battery Backup
• Photo-Eyes • Transmitters and Keypads
Description List Price 24VDC Actuator Arm. For single and dual gate applications................................................................................................$1,280.00
MIRCONT3
Standard 24VDC Control Box. For single gate applications.....................................................................................................$552.00
MIRCONTMS3
Dual Gate 24VDC Control Box. For dual gate applications.......................................................................................................$700.00
24-240 VAC/DC Retro-Reflective Photo-Eyes...................................... $275.00 UL listed to UL325 standards. 40 ft. sensing distance
Built-in Battery Backup provides seamless operation of the gate operator and all DC control and sensing devices in the event of a power loss.
MG1300 LiftMaster® Elite Series™ Maglock. 12 or 24 VDC............................. $465.00 Features junction box with knockouts. Includes transformer and pivoting steel armature (requires Q240MAU module) Q240MAU
Relay Module to facilitate the control................................................... $63.00 and operation of external accessories. Capable of switching loads up to 2 Amps
40BW
5-Conductor Wire for wiring operator............................................... $1,124.00 arm to the control board. 1,000 ft. spool
EL25GD
Single/Multi-Tenant Telephone Entry System, Gray .........................$1,537.00*
AOMRON
MG1300
Q240MAU
Note: Low power draw accessories recommended to maximize cycles when running on battery backup or solar power.
TECHNICAL INFORMATION
Recommended Capacities 1000 lbs.
Cycles per day - 100
900
12.25" 4"
600
600 lbs.
0
3.5"
750
800 lbs.
400
400 lbs.
39.5" 10 ft.
12 ft.
15 ft.
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
5.25"
10.5"
18 ft.
Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
20
LD7LP
*Pricing subject to access control discount; gate multiplier not applicable.
• Added Surge Protection and Spike Suppression
• Maglock
Model MIR1ARM
AOMRON
• Dust Protector
Optional Features
Dual Gate Application Package.............................................................................................................................................$3,259.00 Includes (2) actuator arms and (1) dual gate control box
Model Description List Price LD7LP LiftMaster® 10-30 VAC/DC Low Power Loop Detector,......................... $234.00 <2mA idle current draw
• External Alarm Reset Button • Weatherproof Housing
MIR2PKG3
OPTIONS
Only the LiftMaster® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
• Party Pass • Built-in 315MHz Radio Receiver – Add up to 8 remotes
Description List Price Single Gate Arm Package......................................................................................................................................................$1,831.00 Includes (1) actuator arm and (1) standard control box
operators
2-YEAR WARRANTY
• Soft Start/Stop Operation
Model MIR1PKG3
ACTUATOR GATE
The Miracle-One™ is a DC-powered swing gate operator designed to deliver smooth, ultra-quiet performance. With state-of-the-art features like a battery backup, anti-theft alarm system and variable speeds, this gate operator makes security smart. Even smarter is the ease with which this system can be installed. Backed by the most comprehensive support available, the Miracle-One™ is the complete solution for your customers.
Standard Features
ORDERING
Shipping Weight: Actuator Arm: 36 lbs. Control Box: 17 lbs.
21
TABLE OF CONTENTS SWING GATE OPERATORS
Residential/Light Commercial DC Swing Gate Operator................... 24
Mega Swing™
Commercial DC Swing Gate Operator.............................................. 26
CSW200UL™
Commercial High-Traffic Swing Gate Operator................................ 28
SW 420
Light-Duty Residential Swing Gate Operator.................................... 30
SW 470
Residential/Light Commercial Swing Gate Operator......................... 32
SW 490
Heavy-Duty Industrial Swing Gate Operator.................................... 34
SWING GATE
RSW
23
RSW Residential/Light Commercial DC Swing Gate Operator
operators AND SOLAR PACKAGES Model RSW12V
Description List Price 12VDC Swing Gate Operator with Battery Backup................................................................................................................$2,626.00
The RSW is our most advanced residential and light commercial pad-mounted gate operator. The RSW features a powerful 12VDC motor with soft start/stop operation which helps promote longer gate and operator life as well as reliable performance. LiftMaster® Elite Series™ operators offer the following innovative features designed to meet a variety of applications and customer requirements.
RSW12VH**
12VDC Swing Gate Operator with Battery Backup and Heater..............................................................................................$2,964.00
7AHSLR PKG
Solar Package RSL/RSW includes 20W panel, 2nd 7Ah battery,...............................................................................................$506.00 battery harness, (2) 373LM remotes
33AHSLR PKG
Solar Package RSL/RSW includes 20W panel, 33Ah battery,....................................................................................................$679.00 battery harness, (2) 373LM remotes
3-YEAR WARRANTY
Model MSWIRE12GA6C
OPTIONS Description List Price Dual Gate Connecting Kit (40 ft. wire).....................................................................................................................................$137.00
CPS-UN4* LiftMaster® Commercial Protector System®............................................................................................................................$202.00 Thru-beam photo-eyes, 45 ft. Sensing distance, NEMA 4. Works in conjunction with Power Management System to save power
SWING GATE
SWING GATE
DC Swing Gate Access System with Battery Backup
ORDERING
LD7LP* LiftMaster® Low Power Loop Detector (<2mA idle power draw)...............................................................................................$234.00 CP3*
Standard Features • Powerful 12VDC Motor, Continuous Duty • EverCharge® Power Management System – Maximizes cycles when running on battery backup or solar power while maintaining optimum battery integrity • 12VDC System draws less than 8mA when idle including “on-board” radio • Exceptional Industry-Leading Sandby Power – Keeps Sytem powered longer on battery backup • Battery Backup – Provides operation of the gate and DC accessories and sensing devices in the event of a power loss • On-Board 315MHz Security+® Radio Receiver – Add up to 50 remotes • Inherent Obstruction Sensing • External Obstruction Sensing • Electronic Limit System • Timer-to-Close • Selectable Auto-Open Feature • Auxiliary Outlet • Option to power via Remote Transformer • (1) 7Ah 12V Battery Standard
Security+ remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators. Only the LiftMaster®
®
SGLOCK12V* LiftMaster® Solenoid Lock. Works in conjunction with Power Management System to save power..........................................$317.00
Optional Solar Features Operator can be solar powered by simply adding optional solar package. Choosing the right package depends on geographical location, single or dual application, number of cycles per day and accessories used. See LiftMaster.com or Solar Cycle Charts section of this book for more details.
Recommended Capacities 600 lbs.
600
6-31VAC or 10-40VDC, Low Power Sensing Probe, One-piece, 100 ft. lead wire......................................................................$334.00
MG1300RLY PKG
LiftMaster® Elite Series™ Maglock Package. Includes MG1300 Maglock and Q400MAU 2-Amp relay module.......................$525.00
MBAT
7Ah 12V Battery.........................................................................................................................................................................$31.00
BTYHARN7AH
7Ah Battery Harness....................................................................................................................................................................$7.00
A12330SGLPK
33Ah 12V Battery with Harness...............................................................................................................................................$211.00
SOLPNL10W12V
10-Watt 12V Solar Panel..........................................................................................................................................................$350.00
SOLPNL20W12V
20-Watt 12V Solar Panel..........................................................................................................................................................$468.00
HTRKITRSW**
Self-Regulating Heater, Coil. Protects system to -40°F. Installs into the operator frame.......................................................$345.00
MPEL
Plate for post mounting operator (posts not included)............................................................................................................$119.00
86LM
Remote Antenna Mounting Kit, 15 ft. coax wire.................................................................................................................. $15.15 Net
* Low power draw accessories recommended to maximize cycles when running on battery backup or solar power. **Available factory installed. Please use suffix H (sample: RSW12VH). Heater option not compatible with solar models.
Recommended Cycles per Day - 250 Duty Cycle: Continuous 500 400
400 lbs.
TECHNICAL INFORMATION
200 lbs. 0
12 ft.
14 ft.
16 ft.
Battery Backup Operation 16 ft./400 lbs. swing gate
• Synchronized Close • Non-Scissoring Gate Arm
BATTERY
CYCLES
• Surge/Spike Protection
1 - 7Ah
40
2 - 7Ah
100
1 - 33Ah
275
Order 7Ah battery harness when adding second battery.
24
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
Shipping Weight: 180 lbs.
Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
25
MEGA SWING™ Commercial DC Swing Gate Operator
ORDERING
DC-Powered Swing Gate Operator with Built-in Battery Backup
operators Model MSWDCBB3 (2 batteries included standard)
The Mega Swing™ is a DC-powered addition to the LiftMaster® family of gate operators. Designed with a 24VDC (1/2 HP equivalent) motor, this model provides exceptional starting torque and continuous operation, making it ideal for most applications. Constructed with an aluminum alloy chassis, it’s corrosion resistant and light enough for one person to carry and install. The heavy-duty motor supports gates weighing up to 1200 lbs. and up to 18 ft. in length. This model is UL325 and UL991-compliant for Class I, II, III and IV.
• Soft Start/Stop • DC Operator System
• LED Indicators • Dual Gate Operation • Dynamic Braking • Timer-to-Close • Aluminum Alloy Chassis • Larger Cabinet • Non-Scissor Swing Arm • Universal Controller with 8 Inputs • Right- or Left-Handed Operation • Safety-Stop Tailgate Feature • Ability to Auto-Open When Power Fails • MOVs for Added Surge Protection • Anti-Tailgate Quick-Close Feature • 2-Part Cover for Quick Access to the Control Board
SWING GATE
Only the LiftMaster® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
Thermostat Control Heater, Plate.........................................................$195.00 For temperatures below 32°F (available for 115V operators only)
MA230VKIT
Voltage Conversion Kit, converts from...................................................$10.00 115VAC to 230VAC operation
UN201
912B
Relay Module to facilitate the control.............................. See Parts Price Book and operation of maglocks
MBAT
7Ah 12V Battery, Single.........................................................................$31.00 (2 required per operator)
MG1300
Note: Low power draw accessories recommended to maximize cycles when running on battery backup or solar power.
Optional Features • Heater • Photo-Eyes
Battery Backup Built-in Battery Backup provides seamless operation of the gate operator and all DC control and sensing devices in the event of a power loss.
TECHNICAL INFORMATION OPERATOR AMP RATING (RUNNING)
Recommended Capacities 1200 lbs.
1200
Recommended Cycles per Day - 900 Duty Cycle: Continuous 800
800 lbs.
VAC
1/2 HP
110/220
6.5
650
400 lbs. 0
12 ft.
16 ft.
18 ft.
Battery Backup Operation: 200 Cycles (12 ft./1200 lbs. swing gate)
26
UN201
LD7LP
MG1300 LiftMaster® Elite Series™ Maglock. 12 or 24VDC...............................$465.00 Features junction box with knockouts. Includes transformer and pivoting steel armature (requires 912B module)
• Control Inputs • Inherent Obstruction Sensing
12-24 VDC, 24VAC Loop Detector.........................................................$280.00 11-pin connector included
voltage pHASE 60 HZ
• Built-in Battery Backup (batteries included)
Built-in LiftMaster® 312HM Radio Receiver standard for use with DIP Switch and Security+® remote controls.
A24
SWING GATE
• Built-in Radio Receiver
Hz List Price 50-60.................................................................. $2,544.00
Model Description List Price LD7LP LiftMaster® 10-30 VAC/DC Low Power.................................................$234.00 Loop Detector, <2mA idle current draw
10-Year Warranty chassis and cover
• Continuous Duty DC Motor
Ph 1
OPTIONS
2-Year Warranty electronics and mechanism
Standard Features
Volts 110/220
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
Shipping Weight: 157 lbs.
27
CSW200UL™ Commercial High-Traffic Swing Gate Operator
ORDERING operators
Built for High-Traffic and Engineered for Safety
7-Year RESIDENTIAL Warranty 5-Year COMMERCIAL Warranty
Standard Features • Continuous Duty AC Motor • Built-in Radio Receiver • Alarm Reset Button • Highly Efficient, Extremely Quiet
Only the LiftMaster® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
• Gold Zinc-Plated Chassis Eliminates Corrosion
This advanced electronic control board offers many integrated functions to simplify installation and to provide added flexibility.
• Surge/Lightning Protection • Speed: 90 degrees in 15 seconds
Recommended Capacities CSW200UL™
• Timer-to-Close: Adjustable from 0-60 seconds
1600 lbs.
• Power On/Off Switch
1200 lbs.
• Inputs for Loops, Key Switches, Fire Dept. Switches, Photo-Eyes, Edge, Etc. • Precision Limit Switches
• LiftMaster® Elite Series™ Plug-in Loop Detector • Maglock • OmniControl™ Board Modules
Unique Patented Dual Motor Feature....................................................................................................................................$3,549.00 One motor opens the gate, and the other motor closes it. Ideal in high-cycle gated communities, desert applications, or where extreme temperatures are an issue (Two 1/2 HP 120VAC)
CSW200ULDMDC3
CSW200ULDM model with DC2000 ......................................................................................................................................$4,260.00 power backup system factory installed (Two 1/2 HP 120VAC)
CSW200ULST3
CSW200UL™ model with stainless steel,.............................................................................................................................$3,652.00 powder coated cover for increased durability (1/2 HP 120VAC)
Description List Price 24-240 VAC/DC Retro-Reflective Photo-Eyes.......................................$275.00 UL listed. 40 ft. sensing distance AOMRON
MPEL
Plate for post mounting operator.........................................................$119.00 (posts not included)
MG1300RLY PKG
LiftMaster® Elite Series™ Maglock Package. ....................................$525.00 Includes MG1300 maglock and Q400MAU 2-Amp relay module
Q103
Swivel Arm for Uphill Swing Gates................................... See Parts Price Book
AWB
Weight Balance for long and/or heavy.................................................$145.00 gates that may jerk when opening/closing
G6518CSW*
Self-Regulating Heater, Coil. Protects system.....................................$334.00 to -40°F. Installs into the operator frame
AELD
MPEL
MG1300
800
800 lbs.
600
TECHNICAL INFORMATION
400 lbs.
CSW200ULDM™ and CSW200UL1HP™ 0
8 ft.
12 ft.
MODEL
RECOMMENDED CYCLES/HOUR
CSW200UL1HP™
60
CSW200ULDM™ Duty Cycle: Continuous
28
CSW200ULDM3
1200
Optional Features • Heater
Unique Dual Motor System delivers 1 HP..............................................................................................................................$3,549.00 Perfect for large and heavy gates (1 HP 120VAC)
*Available factory installed. Please use suffix H3 (sample: CSW200UL H3 or CSW200UL DCH3)
Recommended Cycles per Hour - 75 Duty Cycle: Continuous
1600
CSW200UL1HP3
AELD LiftMaster® Elite Series™ Plug-in Loop Detector................................$189.00 Includes sensitivity boost. Designed for and tested with CSW200, SL3000 and HCT operators
OmniControl™ Board
• Solid Steel, Machined Pulley
CSW200UL™ model with DC2000........................................................................................................................................$3,750.00 power backup system factory installed (1/2 HP 120VAC)
Model AOMRON
• Weatherproof High-Density Polyethylene Cover
• High-Speed Precision Limit Switches
CSW200ULDC3
OPTIONS
Built-in LiftMaster® 312HM Radio Receiver standard for use with DIP Switch and Security+® remote controls.
• 120VAC Power
• 24VDC Board
Description List Price Commercial Swing Gate Operator.........................................................................................................................................$3,038.00 (1/2 HP 120VAC)
SWING GATE
SWING GATE
CSW200UL™ models of swing gate operators are the first choice for heavy-traffic applications such as large gated communities, residential developments, commercial complexes and private estates. Unlike other systems, the CSW gate operators are designed with a “non-scissor action” swing arm to greatly reduce the risk of injury. And all models include the safety and reliability of our OmniControl™ board. LiftMaster® Elite Series™ operators feature the highest quality components and are backed by years of proven dependability; each unit is carefully inspected and mechanically tested to provide unsurpassed reliability. Unique engineering innovations in each model also ensure that there’s a CSW to meet practically every swing gate application.
Model CSW200UL3
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
Cont.
16 ft.
Top view
18 ft.
MAX. GATE WEIGHT MAX. GATE LENGTH (LBS.) (FT.) 1000 600
22
Front view
Side view
H" W"
20 Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
D"
DIMENSIONS MODEL
W
H
D
LBS. WEIGHT
CSW200UL
15"
28"
20.5"
175
CSW200ULST
14"
28"
19"
194
CSW200ULDM
15"
28"
24.5"
199
CSW200UL1HP
15"
28"
24.5"
199
29
SW 420 LIGHT-DUTY RESIDENTIAL SWING GATE OPERATOR
ORDERING
Reliable Gear-Driven Swing Gate Operator for Residential Applications
operators Model SW 420 33 11 G3
This compact design supports gate lengths up to 12 ft. and gate weights up to 300 lbs. Powder coated weather-resistant steel enclosure and a high-starting torque motor with built-in overload protection ensure strong, dependable performance. This model is UL325-compliant for Class I, II, III and IV.
Model Description List Price CPS-N4 LiftMaster® Commercial Protector System®.......................................................................................................................................................................................... $243.00 Thru-beam photo-eyes, 45 ft. sensing distance, NEMA 4
• Shadow, Interrupt & Exit Loop Inputs • 24VAC Accessory Power Output • UL325-Compliant Entrapment Protection
Built-in LiftMaster® 312HM Radio Receiver standard for use with DIP Switch and Security+® remote controls. Only the LiftMaster® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
G65 RSW P
Post for In-Ground Mounting....................................................................................................................................................$210.00 4 in. square steel post
G65 RSW D
Pad-Mount Kit (includes two steel brackets).............................................................................................................................$76.00
G305 803002
Post-Mount Kit (includes 4 U-bolts for 3 in. round pipe)...................................................................................................................................$22.00
86LM
Remote Antenna Mounting Kit............................................................................................................................................ $15.15 Net For use with 312HM in remote locations. Kit contains antenna bracket and 15 ft. of cable
• Adjustable Inherent Entrapment Protection System • Full Systems Capability – Compatible with most access control devices and safety accessories • Robust DC Control Circuit Supports Long-Distance Control Wiring Runs • Timer-to-Close (0-180 seconds) • Integrated Maglock Control
Recommended Capacities 600 lbs.
Cycles per hour - 10
525 400
400 lbs.
300
200 lbs.
• Selectable Gate Movement Warning Alarm • Wormgear-in-Oil Gear Reducer
0
8 ft.
10 ft.
12 ft.
TECHNICAL INFORMATION
• Gate Speed of 90 Degrees in 12 Seconds • Fully Adjustable Driven Limit System
18 3/16"
1 3/8"
11 5/8" 3 3/16"
OPERATOR AMP RATING (RUNNING)
• Baked-on High-Durability Powder Coat Finish • Padlockable Quick-Release System • Easy-to-Service Flip-Down Electrical Panel • Integrated Field Wiring Terminal Strip
X
Optional Features • Pad and Post Mount Options • Remote Antenna Refer to the Modifications Section for additional options applicable to this model.
Standard Post Mount shown (Posts not supplied with operator)
DIMENSION
Post Mount
Pedestal Mount
Pad Mount
X
3" min.
12" max.
3"
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
1/3 HP
115-1Ø
6.5
SW420 DIMENSIONAL ART Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
30
VAC 3"
11 3/4"
voltage pHASE 60 HZ
SWING GATE
• GL Logic Control Board
Hz List Price 60......................................................................................................$1,561.00
SWING GATE
• Built-in Radio Receiver
Ph 1
OPTIONS
2-YEAR WARRANTY
Standard Features
Volts 115
Shipping Weight: 110 lbs.
31
SW 470 RESIDENTIAL/LIGHT COMMERCIAL SWING GATE OPERATOR
Medium-Duty Swing Gate Operator for Use in Residential and Light Commercial Applications
operators
Supports gate lengths up to 12 ft. and gate weights up to 500 lbs. Utilizing a weather-resistant, powder coated steel enclosure ensures rugged and reliable performance. This model is UL325-compliant for Class I, II, III and IV.
• UL325-Compliant Entrapment Alarm • Shadow, Interrupt & Exit Loop Inputs • 24VAC Accessory Power Output • Adjustable Inherent Entrapment Protection System • Full Systems Capability – Compatible with most access control devices and safety accessories • Robust DC Control Circuit Supports Long-Distance Control Wiring Runs • Timer-to-Close (0-180 seconds) • Integrated Maglock Control • Selectable Movement Warning Alarm • Industrial-Size “0” Across-the-Line Magnetic Reversing Contactor • High-Starting Torque, Continuous-Duty Industrial Motor with Overload Protection • Heavy-Duty Wormgear-in-Oil Gear Reducer • Gate Speed of 90 Degrees in 12 Seconds • Fully Adjustable Driven Limit System • Baked-on High-Durability Powder Coat Finish • Manual Quick-Release System
Ph 1
Hz List Price 60....................................$1,751.00
SW 470 50 21 G3
230
1
60....................................$1,751.00
Model Description List Price CPS-N4 LiftMaster® Commercial Protector System®........................................$243.00 Thru-beam photo-eyes, 45 ft. sensing distance, NEMA 4
Built-in LiftMaster®
312HM Radio Receiver standard for use with DIP Switch and Security+® remote controls.
Only the LiftMaster® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
G305 803002
Post-Mount Kit.......................................................................................$22.00 (includes 4 U-bolts for 3 in. round pipe)
86LM
Remote Antenna Mounting Kit........................................................ $15.15 Net For use with 312HM in remote locations. Kit contains antenna bracket and 15 ft. of cable
G65 18300
Thermostat Control Heater, Fin Type (115V).........................................$334.00
G65 19084
Thermostat Control Heater, Fin Type (230V).........................................$387.00
G65 18300
• Post-Mount Option • Heater • Photo-Eyes Refer to the Modifications Section for additional options applicable to this model.
Recommended Capacities 750 lbs.
750 600
TECHNICAL INFORMATION
Cycles per hour - 10
22 1/4"
13 5/8"
20"
8"
14 1/4" 250 lbs.
3/8" 0
• Pad Mount Standard
8 ft.
10 ft.
12 ft.
Standard Pad Mount shown
• Heavy-Gauge Weather-Resistant Housing
Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
SW470 DIMENSIONAL ART To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
OPERATOR AMP RATING (RUNNING)
500
500 lbs.
• Removable Electrical Panel for Easy Servicing
32
CPS-N4
Optional Features
13 3/8"
voltage pHASE 60 HZ
SWING GATE
• GL Logic Control Board
Volts 115
SWING GATE
• Built-in Radio Receiver
Model SW 470 50 11 G3
OPTIONS
2-YEAR WARRANTY
Standard Features
ORDERING
VAC
1/2 HP
115-1Ø
6.5
230-1Ø
3.3
Shipping Weight: 110 lbs.
33
SW 490 HEAVY-DUTY industrial swing gate operator
ORDERING
Powerful Performance for Heavy Industrial Swing Gate Applications
OPERATORS
This hefty design supports gate lengths up to 22 ft. and gate weights up to 1,000 lbs. Utilizing a weather-resistant, powder coated steel enclosure, a wormgear reducing drive and high-starting torque motor offers you years of reliable and powerful performance. This model is UL325-compliant for Class I, II, III and IV.
2-YEAR WARRANTY
• Continuous Duty AC Motor • Built-in Radio Receiver • GL Logic Control Board • UL325-Compliant Entrapment Alarm • Shadow, Interrupt & Exit Loop Inputs • 24VAC Accessory Power Output • Adjustable Inherent Entrapment Protection System • Full Systems Capability – Compatible with most access control devices and safety accessories
Built-in LiftMaster® 312HM Radio Receiver standard for use with DIP Switch and Security+® remote controls. Only the LiftMaster® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
• Sequenced Access Management System – Simple 4-wire connection • Industrial Wormgear-in-Oil Gear Reducer • Gate Speed of 90 Degrees in 12 Seconds
230
1
60......................................................................................................$3,312.00
SW 490 100 81 G3
208
1
60......................................................................................................$3,312.00
SW 490 100 83 G3
208
3
60......................................................................................................$3,312.00
SW 490 100 23 G3
230
3
60......................................................................................................$3,312.00
SW 490 100 43 G3
460
3
60......................................................................................................$3,312.00
SW 490 100 53 G3
575
3
60......................................................................................................$3,312.00
Description List Price Thermostat Control Heater, Fin Type....................................................$334.00 (115V + 575V)
G65 18300
Quick-Release Arm Cap Kit..................................................................$493.00
50-SW4QRR
Optional Features • Quick-Release Arm Kit
Refer to the Modifications Section for additional options applicable to this model.
• High-Starting Torque, Continuous-Duty Industrial Motor with Overload Protection
SW 490 100 21 G3
G65 19084 Thermostat Control Heater, Fin Type....................................................$387.00 (208V-460V)
• Timer-to-Close (0-180 seconds)
• Industrial-Size 0 Across-the-Line Magnetic Reversing Contactor
Hz List Price 60......................................................................................................$3,312.00
Model G65 18300
• Heater
• Selectable Movement Warning Alarm
Ph 1
OPTIONS
• Robust DC Control Circuit Supports Long-Distance Control Wiring Runs • Integrated Maglock Control
Volts 115
SWING GATE
• Photo-Eyes
Recommended Capacities 1800 lbs.
Recommended Cycles per Day - 20 Duty Cycle: Continuous
1800 1600
1400
1400 lbs.
1000
1000 lbs.
0
12 ft.
16 ft.
18 ft.
TECHNICAL INFORMATION 27 3/4"
13 3/4"
26 1/4"
8"
OPERATOR AMP RATING (RUNNING)
22 ft.
• Heavy-Duty Arm Assembly • Fully Adjustable Driven Limit System
22"
• Baked-on High-Durability Powder Coat Finish • Manual Quick-Release System • Removable Electrical Panel for Easy Servicing • Pad Mount • Heavy-Gauge Weather-Resistant Cover
Standard Pad Mount shown
Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
18 1/2"
voltage pHASE 60 HZ
SWING GATE
Standard Features
Model SW 490 100 11 G3
VAC
1 HP
115-1Ø
13.4
208-1Ø
6.7
208-3Ø
3.6
230-1Ø
6.7
230-3Ø
3.4
460-3Ø
1.7
575-3Ø
1.4
Shipping Weight: 200 lbs.
SW490 DIMENSIONAL ART 34
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
35
TABLE OF CONTENTS SLIDE AND OVERHEAD GATE OPERATORS
Residential/Light Commercial DC Slide Gate Operator..................... 38
Mega Slide
Commercial DC Slide Gate Operator............................................... 40
Mega Slide-X
Commercial DC Slide Gate Operator............................................... 42
SL 930
Heavy-Duty Commercial DC Slide Gate Operator............................ 44
SL3000UL™
Commercial High-Traffic Slide Gate Operator.................................. 46
SL 575
Heavy-Duty Commercial Slide Gate Operator.................................. 48
SL 585
Industrial Slide Gate Operator.......................................................... 50
SL 595
Heavy-Duty Industrial Slide Gate Operator...................................... 52
VSL 595
Variable Speed Heavy-Duty Industrial Slide Gate Operator............. 54
HS 670
Heavy-Duty Industrial Hydraulic Slide Gate Operator...................... 56
HCT
Commercial High-Traffic Overhead Gate Operator.......................... 58
SLIDE GATE
RSL
37
RSL Residential/Light Commercial DC Slide Gate Operator
ORDERING
Recommended Capacities
DC Slide Gate Access System with Battery Backup
DC OPERATOR SYSTEM
MAX GATE WT. (lbs.)
MAX GATE LENGTH (ft.)
RECOMMENDED CYCLES/DAY
12VDC
800
25
120
The RSL is our most advanced residential and light commercial pad-mounted gate operator. The RSL features a powerful 12VDC motor with soft start/stop operation which helps promote longer gate and operator life as well as reliable performance. LiftMaster® Elite Series™ operators offer the following innovative features designed to meet a variety of applications and customer requirements.
Duty Cycle: Continuous
operators AND SOLAR PACKAGES
3-Year Warranty
Model RSL12V
Description List Price 12VDC Slide Gate Operator with Battery Backup..................................................................................................................$2,130.00
RSL12VH**
12VDC Slide Gate Operator with Battery Backup, Heater......................................................................................................$2,468.00
7AHSLR PKG
Solar Package. Includes 20W panel, 2nd 7Ah..........................................................................................................................$506.00 battery and harness, (2) 373LM remotes
33AHSLR PKG
Solar Package. Includes 20W panel, 33Ah...............................................................................................................................$679.00 battery and harness, (2) 373LM remotes
OPTIONS Model MSWIRE12GA6C
Standard Features • Powerful 12VDC Motor, Continuous Duty
• 12VDC System – Draws less than 8mA when idle including “on-board” radio • Exceptional Industry-Leading Sandby Power – Keeps system powered longer on battery backup • Battery Backup – Provides operation of the gate and DC accessories and sensing devices in the event of a power loss • On-Board 315MHZ Security+® Radio Receiver – Add up to 50 remotes • Inherent Obstruction Sensing • External Obstruction Sensing
CP3*
6-31VAC or 10-40VDC, Low Power Sensing Probe, one-piece, 100 ft. lead wire......................................................................$334.00 LiftMaster® Elite Series™ Maglock Package. Includes MG1300 maglock and Q400MAU 2-Amp relay module........................$525.00
MBAT
7Ah 12V Battery.........................................................................................................................................................................$31.00
Operator can be solar powered by simply adding optional solar package. Choosing the right package depends on geographical location, single or dual application, number of cycles per day and accessories used. See LiftMaster.com or Solar Cycle Charts section of this book for more details.
BTYHARN7AH
7Ah Battery Harness....................................................................................................................................................................$7.00
A12330SGLPK
33Ah 12V Battery with Harness...............................................................................................................................................$211.00
SOLPNL10W12V
10-Watt 12V Solar Panel..........................................................................................................................................................$350.00
SOLPNL20W12V
20-Watt 12V Solar Panel..........................................................................................................................................................$468.00
HTRKITRSL**
Self-Regulating Heater, Coil. Protects system to -40°F. Installs into the operator frame.......................................................$345.00
Battery Backup Operation
MSLM
Mounting Stand/Plate, height 9".............................................................................................................................................$292.00
86LM
Remote Antenna Mounting Kit, 15 ft. coax wire.................................................................................................................. $15.15 Net
Optional Solar Features
16 ft./650 lbs. slide gate
• Timer-to-Close • Selectable Auto-Open Feature • Option to Power via Remote Transformer • (1) 7Ah 12V Battery Standard
LD7LP* LiftMaster® Low Power Loop Detector (<2mA idle power draw)...............................................................................................$234.00 MG1300RLY PKG
• Electronic Limit System
• Auxiliary Outlet
CPS-UN4* LiftMaster® Commercial Protector System®............................................................................................................................$202.00 Thru-beam photo-eyes, 45 ft. sensing distance, NEMA 4. Works in conjunction with Power Management System to save power
Only the LiftMaster® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
BATTERY
CYCLES
1 - 7Ah
40
2 - 7Ah
100
1 - 33Ah*
275
SLIDE GATE
SLIDE GATE
• EverCharge® Power Management System – Maximizes cycles when running on battery backup or solar power while maintaining optimum battery integrity
Description List Price Dual Gate Connecting Kit (40 ft wire)......................................................................................................................................$137.00
*Low power draw accessories recommended to maximize cycles when running on battery backup or solar power. **Available factory installed. Please use suffix H (sample: RSL12VH). Heater option not compatible with solar models.
TECHNICAL INFORMATION
*33Ah battery not available in combination with heater option. For best performance and increased cycles on battery backup, 2nd battery recommended on gates over 16 ft. or 600 lbs. Order 7Ah battery harness when adding 2nd battery.
• Manual Disconnect • Surge/Spike Protection • Supplied with 25 ft. of #41 Black Oxide Chain
Shipping Weight: 105 lbs.
Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
38
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
39
MEGA SLIDE Commercial DC Slide Gate Operator
ORDERING
DC-Powered Slide Gate Operator with Built-in Battery Backup
Recommended Capacities
The Mega Slide is a DC-powered addition to the LiftMaster® family of slide gate operators. Designed with a 24VDC (1/2 HP equivalent) motor, this model provides exceptional starting torque, making it ideal for most applications. Constructed with an aluminum alloy chassis, it’s corrosion resistant and light enough for one person to carry and install. The heavy-duty motor supports gates weighing up to 1,000 lbs. and up to 32 ft. in length. This model is UL325 and UL991-compliant for Class I, II, III and IV.
• Built-in Radio Receiver • Built-in Battery Backup (batteries included) • DC Operator System • Control Inputs • Inherent Obstruction Sensing
Built-in LiftMaster®
312HM Radio Receiver standard for use with DIP Switch and Security+® remote controls.
Only the LiftMaster® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
• Dynamic Braking
• Photo-Eyes
• Safety-Stop Tailgate Feature
450
Battery Backup
Ph 1
Hz List Price 50-60..................................$2,226.00
A24
12-24 VDC, 24VAC Loop Detector, 11-pin............................................$280.00 connector included
MA201
Thermostat Control Heater, Plate.........................................................$162.00 For temperatures below 32°F (available for 115V operators only)
MA230VKIT
Voltage Conversion Kit, converts from...................................................$10.00 115VAC to 230VAC operation
LD7LP
A24
MG1300 LiftMaster® Elite Series™ Maglock. 12 or 24 VDC..............................$465.00 Features junction box with knockouts. Includes transformer and pivoting steel armature (requires 912B module) 912B
Relay Module to facilitate the control.............................. See Parts Price Book and operation of maglocks
MBAT
7Ah 12V Battery, Single.........................................................................$31.00 (2 required per operator)
MA201
MG1300
Note: Low power draw accessories recommended to maximize cycles when running on battery backup or solar power.
Built-in Battery Backup provides seamless operation of the gate operator and all DC control and sensing devices in the event of a power loss.
• Ability to Auto-Open When Power Fails
TECHNICAL INFORMATION
• MOVs for Added Surge Protection
OPERATOR AMP RATING (RUNNING)
• Anti-Tailgate Quick-Close Feature
voltage pHASE 60 HZ
• Supplied with 20 ft. of #41 Nickel-Plated Chain
Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
40
Duty Cycle: Continuous
Model Description List Price LD7LP LiftMaster® 10-30 VAC/DC Low Power.................................................$234.00 Loop Detector, <2mA idle current draw
• Heater
• Right- or Left-Handed Operation
32
OPTIONS
• Dual Gate Operation
• Universal Controller with 8 Inputs
1000
Model Volts 110/220 MSLDCBB3 (2 batteries included standard)
Optional Features
• Aluminum Alloy Chassis
1/2*
operators
• LED Indicators
• Timer-to-Close
RECOMMENDED CYCLES/DAY
SLIDE GATE
SLIDE GATE
• Soft Start/Stop
MAX GATE LENGTH (ft.)
Battery Backup Operation: 100 Cycles (20 ft./1000 lbs. slide gate)
10-Year Warranty chassis and cover
• Continuous Duty DC Motor
MAX GATE WT. (lbs.)
*equivalent 24VDC
2-Year Warranty electronics and mechanism
Standard Features
HP
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
VAC
1/2 HP
110/220
6.5
Shipping Weight: 115 lbs.
41
MEGA SLIDE-X COMMERCIAL DC SLIDE gate operator
ORDERING
DC-Powered Slide Gate Operator with Built-in Battery Backup
Recommended Capacities
The Mega Slide-X is a DC-powered addition to the LiftMaster® family of gate operators. Designed with a 24VDC (1/2 HP equivalent) motor, this model provides exceptional starting torque and continuous operation, making it ideal for most applications. Constructed with 1/4" gold zinc-plated steel chassis, it’s corrosion resistant. The heavy-duty motor supports gates weighing up to 1,000 lbs. and up to 32 ft. in length. This model is UL325 and UL991-compliant for Class I, II, III and IV.
• Built-in Radio Receiver • Built-in Battery Backup (batteries included) • Gold Zinc-Plated Chassis • Soft Start/Stop • DC Operator System
Built-in LiftMaster® 312HM Radio Receiver standard for use with DIP Switch and Security+® remote controls. Only the LiftMaster® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
• LED Indicators
• Photo-Eyes
• Right- or Left-Handed Operation
450
Battery Backup
Ph 1
Hz List Price 50-60..................................$2,226.00
A24
12-24 VDC, 24VAC Loop Detector, 11-pin............................................$280.00 connector included
UN201
Thermostat Control Heater, Plate.........................................................$195.00 For temperatures below 32°F (available for 115V operators only)
MA230VKIT
Voltage Conversion Kit, converts from...................................................$10.00 115VAC to 230VAC operation
LD7LP
A24
MG1300 LiftMaster® Elite Series™ Maglock. 12 or 24 VDC..............................$465.00 Features junction box with knockouts. Includes transformer and pivoting steel armature (requires 912B module) 912B
Relay Module to facilitate the control.............................. See Parts Price Book and operation of maglocks
MBAT
7Ah 12V Battery, Single.........................................................................$31.00 (2 required per operator)
UN201
MG1300
Note: Low power draw accessories recommended to maximize cycles when running on battery backup or solar power.
Built-in Battery Backup provides seamless operation of the gate operator and all DC control and sensing devices in the event of a power loss.
• Safety-Stop Tailgate Feature
TECHNICAL INFORMATION
• Ability to Auto-Open When Power Fails
OPERATOR AMP RATING (RUNNING)
• MOVs for Added Surge Protection
voltage pHASE 60 HZ
• Anti-Tailgate Quick-Close Feature • Supplied with 20 ft. of #41 Nickel-Plated Chain
Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
42
Duty Cycle: Continuous
Model Description List Price LD7LP LiftMaster® 10-30 VAC/DC Low Power.................................................$234.00 Loop Detector, <2mA idle current draw
• Heater
• Universal Controller with 8 Inputs
32
OPTIONS
• Inherent Obstruction Sensing
• Timer-to-Close
1000
Model Volts 110/220 MSLXDCBB3 (2 batteries included standard)
• Control Inputs
• Dynamic Braking
1/2*
operators
Optional Features
• Dual Gate Operation
RECOMMENDED CYCLES/DAY
SLIDE GATE
SLIDE GATE
• XL Cabinet – Allows more room for accessories
MAX GATE LENGTH (ft.)
Battery Backup Operation: 100 Cycles (20 ft./1000 lbs. slide gate)
10-Year Warranty chassis and cover
• Continuous Duty DC Motor
MAX GATE WT. (lbs.)
*equivalent 24VDC
2-Year Warranty electronics and mechanism
Standard Features
HP
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
VAC
1/2 HP
110/220
6.5
Shipping Weight: 154 lbs.
43
SL 930 HEAVY-DUTY commercial DC SLIDE gate operator
ORDERING
DC-Powered Commercial Slide Gate Operator for Heavy Gates and High-Cycle Applications
Recommended Capacities
Designed for dependable performance, this DC operator supports gate lengths up to 40 ft. and gate weights up to 1,500 lbs. Powder coated weather-resistant steel enclosure and an exceptional starting 90VDC torque motor with thermal overload protection ensure strong, dependable performance. This model is UL325-compliant for Class I, II, III and IV.
DC OPERATOR SYSTEM
MAX GATE WT. (lbs.)
MAX GATE LENGTH (ft.)
RECOMMENDED CYCLES/HR.
12VDC
1500
40
CONTINUOUS DUTY
operators Model Volts 115 SL 930 DC 113 SL 930 DC BB3* 115 *Factory installed battery backup system
2-Year Warranty
Ph 1 1
Hz List Price 60....................................$3,273.00 60....................................$3,751.00
OPTIONS
Standard Features • Continuous Duty DC Motor • Built-in Radio Receiver • Full Systems Control Board • Interrupt and Exit Loop Inputs
Only the LiftMaster® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
• UL325-Compliant Entrapment Alarm • Full Systems Capability – Compatible with most access control devices and safety accessories
Optional Features
• Timer-to-Close (0-45 seconds)
• Steel Mounting Post
• High-Starting Torque, Continuous-Duty Industrial DC Motor with Overload Protection
• Battery Backup System
Model A24
Description List Price 12-24 VDC or 24VAC Loop Detector. 11-pin.........................................$280.00 connector included. Adjustable sensitivity
GC902
Thermostat Control Heater, Strip..........................................................$279.00 Wraps around gearboxes and motors
MS2300
Post for in-ground mounting, 4 in. sq. post.........................................$232.00
GC901
Light Delay Timer. Connect a light to the gate.....................................$190.00
GC804-12
Adjustable Timer. Up to 600 hrs...........................................................$231.00
A24
GC902
SLIDE GATE
GC901
• Heater
• Soft Start/Soft Stop • Adjustable Inherent Entrapment Protection System
TECHNICAL INFORMATION
• Robust DC Control Circuit Supports Long-Distance Control Wiring Runs
OPERATOR AMP RATING (RUNNING)
• Dynamic Braking System • Powerful 90VDC Motor
voltage pHASE 60 HZ
SLIDE GATE
• 12VDC and 115VAC Accessory Power Output
Built-in LiftMaster® 312HM Radio Receiver standard for use with DIP Switch and Security+® remote controls.
• Fully Adjustable Driven Limit System • Gate Speed of 10 Inches per Second • Baked-on High-Durability Powder Coat Finish
VAC
AMPS
115-1Ø
5.0
• Standard Manual Release System • Pad Mount Standard • Supplied with 40 Feet of #41 Black Oxide Chain • Efficient Chain and Sprocket Gear Reduction
44
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
Shipping Weight: 170 lbs.
45
SL3000UL™ Commercial High-Traffic Slide Gate Operator
operators
Exceeding Expectations for High-Traffic Applications The SL3000UL™ models of slide gate operators are the first choice for heavy-traffic applications and high-demand customers including large development and management companies, prestigious residential gated communities and custom home builders. LiftMaster® Elite Series™ operators feature the highest quality components and are backed by years of proven reliability; each unit is carefully inspected and mechanically tested to provide unsurpassed performance. Unique engineering innovations ensure that any SL3000UL™ model will meet the needs of almost every type of high-traffic gated entrance.
7-Year Residential Warranty
• Continuous Duty AC Motor • Built-in Radio Receiver • Alarm Reset Button • 120VAC Power
312HM Radio Receiver standard for use with DIP Switch and Security+® remote controls.
Only the LiftMaster® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
• 24VDC Board • Surge Suppressor/Lightning Protection • Soft Stop
OmniControl™ Board
• Electronic Motor Disconnect
This advanced electronic control board offers many integrated functions to simplify installation and to provide added flexibility. In addition, the built-in surge suppression circuit protects the entire system from lightning & strikes.
• 30-to-1 Gear Reducer • Precision Limit Switches • Zinc-Plated Chassis – Eliminates corrosion • Speed of 12 Inches per Second • Timer-to-Close: Adjustable from 0-60 seconds • Power On/Off Switch • Inputs for Loops, Key Switches, Fire Dept. Switches, Photo-Eyes, Edge, etc. • Alarm and Emergency Reversing Detection • #41 Black Oxide Chain
Optional Features • Heater • LiftMaster® Elite Series™ Plug-in Loop Detector • OmniControl™ Board Modules
46
Description List Price Commercial Slide Gate Operator.......................................................$2,655.00 (1/2 HP 120VAC)
SL3000ULDC3
SL3000UL model with DC2000 power...............................................$3,365.00 backup system factory installed (1/2 HP 120VAC)
SL3000UL1HP3
Unique Dual Motor System delivers 1 HP .........................................$3,205.00 Perfect for large and heavy gates (1 HP 120VAC)
SL3000UL™
1000
37
Cont.
SL3000ULDM3
Unique Patented Dual Motor Feature. One motor..............................$3,205.00 opens the gate, and the other motor closes it. This feature is ideal in high-cycle gated communities, desert applications, or where extreme temperatures are an issue (Two 1/2 HP 120VAC)
SL3000ULDM™
800
37
Cont.
SL3000ULDMDC3
SL3000ULDM model with DC2000 power backup system factory installed (Two 1/2 HP 120VAC)..........$3,916.00 SL3000UL1HP™
2000
37
35
LiftMaster® Elite Series™ Plug-in Loop Detector offers simplicity of installation and optional modules are available to provide added functionality to your gate operator installation.
SL3000ULE3
SL3000UL3 model with Emergency Vehicle Access...........................$2,655.00 (1/2 HP 120VAC)
SL3000ULDCE3
SL3000ULDC3 model with Emergency Vehicle Access .....................$3,365.00 (1/2 HP 120VAC)
MODEL
MAX MAX RECOMMENDED GATE WT. GATE CYCLES/ (lbs.) LENGTH HR. (ft.)
Speed of 12 inches per second Duty Cycle: Continuous
OPTIONS Model AOMRON
Description List Price 24-240 VAC/DC Retro-Reflective Photo-Eyes.......................................$275.00 UL listed. 40 ft. sensing distance
AELD LiftMaster® Elite Series™ Plug-in Loop Detector................................$189.00 Includes sensitivity boost. Designed for and tested with CSW200, SL3000 and HCT operators MPEL
Plate for post mounting operator.........................................................$119.00 (posts not included)
MSEL
Steel Stand for mounting to concrete pad...........................................$292.00
MG1300RLY PKG
LiftMaster® Elite Series™ Maglock Package......................................$525 .00 Includes MG1300 maglock and Q400MAU 2-Amp relay module
Q160
Long Gate Kit. Adjusts gate travel up to 51 ft.......................................$16.00 (call Technical Support for application info)
G6518SL*
Self-Regulating Heater, Coil. Protects system.....................................$334.00 to -40°F. Installs into the operator frame
AOMRON
SLIDE GATE
SLIDE GATE
• Highly Efficient, Extremely Quiet
Built-in LiftMaster®
Recommended Capacities
Model SL3000UL3
Emergency Access Gate Operators
5-Year Commercial Warranty
Standard Features
ORDERING
AELD
MPEL
MSEL
*Available factory installed. Please use suffix H3 (sample: SL3000UL H3 or SL3000UL DCH3) MG1300
Emergency Access Gate Operators Models SL3000ULE3 and SL3000ULDCE3 have been specifically designed to meet fire marshal’s requirements for fire and emergency access. In the event of a power loss, the solenoid brake is automatically released, giving Emergency personnel the ability to push the gate open. If power is still available, an easy-to-identify emergency release button located on the front cover will disengage the solenoid brake so that the gate can be opened manually.
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
TECHNICAL INFORMATION Shipping Weight:
TOP VIEW
SL3000UL™: 130 lbs. SL3000ULDM™: 157 lbs. SL3000UL1HP™: 157 lbs. Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
FRONT VIEW
SIDE VIEW
25"
19"
18"
47
SL 575 HEAVY-DUTY commercial SLIDE gate operator
Reliable Chain-Driven Slide Gate Operator for Commercial Applications
ORDERING
1/2 HP OPERATORS
This heavy-duty design supports gate lengths up to 40 ft. and gate weights up to 1,200 lbs. Powder coated weather-resistant steel enclosure and a high-starting torque motor with built-in overload protection ensure strong, dependable performance. This model is UL325-compliant for Class I, II, III and IV.
2-Year Warranty
Model SL 575 50 11 G3
Volts 115
Ph 1
Hz List Price 60....................................$2,408.00
SL 575 50 21 G3
230
1
60....................................$2,408.00
SL 575 50 81 G3
208
1
60....................................$2,408.00
SL 575 50 83 G3
208
3
60....................................$2,408.00
SL 575 50 23 G3
230
3
60....................................$2,408.00
SL 575 50 43 G3
460
3
60....................................$2,408.00
SL 575 50 53 G3
575
3
60....................................$2,408.00
Recommended Capacities HP
1/2
MAX MAX GATE MAX GATE RECOMMENDED GATE LENGTH LENGTH CYCLES/HR. WT. overhead/ cantilever (lbs.)
v-groove (ft.)
(ft.)
1200
40
25
22
Duty Cycle: Continuous
Standard Features
OPTIONS
• Continuous Duty AC Motor
Model Description List Price CPS-N4 LiftMaster® Commercial Protector System®........................................$243.00 Thru-beam photo-eyes, 45 ft. sensing distance, NEMA 4
• Universal Footprint • Larger Control Box • Integrated 3-Button Control Station • Large Accessory Tray • Self-Locking Drive • External Manual Disconnect • GL Logic Control Board • Interrupt & Exit Loop Inputs • Supports Optional LiftMaster® Plug-in Loop Detectors • 24VAC Accessory Power Output • UL325-Compliant Entrapment Alarm with External Reset Button • Adjustable Inherent Entrapment Protection System • Timer-to-Close (0-180 seconds) • Integrated Maglock Control • Industrial-Size 0 Across-the-Line Magnetic Reversing Contactor • High-Starting Torque, Continuous-Duty Industrial Motor with Overload Protection
Only the LiftMaster® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
G71 416 7NH
LiftMaster® Plug-in Loop Detector.......................................................$334.00 Designed for and tested with SL575 operators
ACP17
Fire Access Release Kit, T-handle releases chain................................$153.00
G19 3025
#50 Nickel-Plated Chain – 25 ft. bulk pack.................... See Parts Price Book
ACP17
factory installed heater Standard Features Cont.
• Adjustable Friction Clutch System • Heavy-Duty Shaft Bearings
Thermostatically controlled fin heater modification, use suffix H3 (Sample: SL 575 50 11 H3) 65 32449 (115V & 575V).....................................................List Price Upcharge $334.00 65 32448
(208V - 460V)......................................................List Price Upcharge $352.00
• Padlockable Weather-Resistant Lockable Cover
Optional Features
TECHNICAL INFORMATION
• Additional Nickel-Plated Chain - Bulk Pack • Fire Access Release Kit
OPERATOR AMP RATING (RUNNING)
Refer to the Modifications Section for additional options applicable to this model. voltage pHASE 60 HZ
• Selectable Gate Movement Warning Alarm • Gate Speed of 10 Inches per Second • Fully Adjustable Driven Limit System • Automatic Braking System • Pad and Post Mount Standard • Supplied with 25 ft. of #50 Nickel-Plated Chain Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
48
G71 416 7NH
SLIDE GATE
SLIDE GATE
• Built-in Radio Receiver
Built-in LiftMaster® 312HM Radio Receiver standard for use with DIP Switch and Security+® remote controls.
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
VAC
1/2 HP
115-1Ø
9.0
208-1Ø
4.4
208-3Ø
2.2
230-1Ø
4.5
230-3Ø
2.0
460-3Ø
1.0
575-3Ø
0.9
Shipping Weight: 225 lbs.
49
SL 585 Industrial Slide Gate Operator
1/2 HP
Reliable Gear-Driven Slide Gate Operator for Commercial and Industrial Applications
Model SL 585 50 11 G3 SL 585 50 21 G3 SL 585 50 81 G3 SL 585 50 83 G3 SL 585 50 23 G3 SL 585 50 43 G3 SL 585 50 53 G3
This heavy-duty design supports gate lengths up to 75 ft. and gate weights up to 1,900 lbs. Powder coated weather-resistant steel enclosure and a high-starting torque motor with built-in overload protection ensure strong, dependable performance. This model is UL325-compliant for Class I, II, III and IV.
Model SL 585 100 11 G3 SL 585 100 21 G3 SL 585 100 81 G3 SL 585 100 83 G3 SL 585 100 23 G3 SL 585 100 43 G3 SL 585 100 53 G3
Standard Features • Continuous Duty AC Motor
• Large Accessory Tray • External Manual Disconnect • Built-in Radio Receiver
Ph 1 1 1 3 3 3 3
Hz List Price 60....................................$3,132.00 60....................................$3,132.00 60....................................$3,132.00 60....................................$3,132.00 60....................................$3,132.00 60....................................$3,132.00 60....................................$3,132.00
Model SL 585 150 11 G3 SL 585 150 21 G3
Only the LiftMaster® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
factory installed heater
Standard Features Cont.
• 24VAC Accessory Power Output
• Adjustable Friction Clutch System
• UL325-Compliant Entrapment Alarm with External Reset Button
• Padlockable Weather-Resistant Lockable Cover
• Adjustable Inherent Entrapment Protection System
Optional Features
• Timer-to-Close (0-180 seconds)
• Diagonal Support Brace
• Integrated Maglock Control
• Additional Nickel-Plated Chain - Bulk Pack
• Industrial-Size 0 Across-the-Line Magnetic Reversing Contactor
Refer to the Modifications Section for additional options applicable to this model.
• High-Starting Torque, Continuous-Duty Industrial Motor with Overload Protection
Volts 115 230 208 208 230 460 575
Built-in LiftMaster® 312HM Radio Receiver standard for use with DIP Switch and Security+® remote controls.
• Interrupt & Exit Loop Inputs • Supports Optional LiftMaster® Plug-in Loop Detectors
Hz List Price 60....................................$2,770.00 60....................................$2,770.00 60....................................$2,770.00 60....................................$2,770.00 60....................................$2,770.00 60....................................$2,770.00 60....................................$2,770.00
Volts 115 230
Ph 1 1
Hz List Price 60....................................$3,296.00 60....................................$3,296.00
HP
MAX GATE WT. (lbs.)
MAX MAX RECOMMENDED GATE GATE CYCLES/HR. LENGTH LENGTH overhead/ v-groove (ft.)
cantilever (ft.)
1/2
1000
45
25
20
1
1600
70
35
20
1-1/2
1900
75
40
20
Duty Cycle: Continuous
Thermostatically controlled fin heater modification, use suffix H3 (Sample: SL 585 50 11 H3) 65 32449 (115V & 575V).....................................................List Price Upcharge $332.00 65 32448 (208V - 460V)......................................................List Price Upcharge $352.00
OPTIONS Model Description List Price CPS-N4 LiftMaster® Commercial Protector System®........................................$243.00 Thru-beam photo-eyes, 45 ft. sensing distance, NEMA 4 G71 416 7NH
LiftMaster® Plug-in Loop Detector.......................................................$334.00
G65 3509
Diagonal Support Brace, for structural support.....................................$67.00
SL585LIMIT
Long Gate Kit. Adjusts gate travel up to 70 ft.......................................$68.00 (Call Technical Support for application information)
ACP17
Fire Access Release Kit, T-handle releases chain................................$153.00
G19 3025
#50 Nickel-Plated Chain – 25 ft. bulk pack.................... See Parts Price Book
G71 416 7NH
ACP17
TECHNICAL INFORMATION
• Selectable Gate Movement Warning Alarm • Heavy-Duty Wormgear-in-Oil Gear Reducer
OPERATOR AMP RATING (RUNNING)
• Gate Speed of 11 Inches per Second • Automatic Braking System • Pad and Post Mount Standard • Supplied with 25 ft. of #50 Nickel-Plated Chain Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
Shipping Weight: 240 lbs.
voltage pHASE 60 HZ
• Fully Adjustable Driven Limit System
50
Recommended Capacities
SLIDE GATE
SLIDE GATE
• GL Logic Control Board
Ph 1 1 1 3 3 3 3
1-1/2 HP
• Universal Footprint • Integrated 3-Button Control Station
Volts 115 230 208 208 230 460 575
1 HP
2-Year Warranty
• Larger Control Box
ORDERING
VAC 115-1Ø 208-1Ø 208-3Ø 230-1Ø 230-3Ø 460-3Ø 575-3Ø
1/2 HP 9.0 3.9 2.2 4.5 2.0 1.0 1.2
1 HP 13.6 6.4 4.0 6.8 3.6 1.8 1.4
1-1/2 HP 17.5 9.4 6.6 8.7 6.2 3.1 2.5
51
SL 595 Heavy-Duty Industrial Slide Gate Operator
ORDERING 1 HP
Extreme Heavy-Duty Operator Designed for Industrial Locations
Model SL 595 100 11 G3 SL 595 100 21 G3 SL 595 100 81 G3 SL 595 100 83 G3 SL 595 100 23 G3 SL 595 100 43 G3 SL 595 100 53 G3
The extremely powerful design supports gate lengths up to 90 ft. and gate weights up to 2,500 lbs. Fully enclosed NEMA 3R, oiltight, weatherproof, lockable cabinet and a high-starting continuous-duty torque motor with built-in overload protection ensure rugged and reliable performance. This model is UL325-compliant for Class I, II, III and IV.
Volts 115 230 208 208 230 460 575
Ph 1 1 1 3 3 3 3
Hz List Price 60...................................$3,833.00 60...................................$3,833.00 60...................................$3,833.00 60...................................$3,833.00 60...................................$3,833.00 60...................................$3,833.00 60...................................$3,833.00
Recommended Capacities HP
2-Year Warranty
Volts 115 230
Ph 1 1
Hz List Price 60...................................$4,008.00 60...................................$4,008.00
Volts 208 230 460 575
Ph 3 3 3 3
Hz List Price 60...................................$4,183.00 60...................................$4,183.00 60...................................$4,183.00 60...................................$4,183.00
overhead/ v-groove (ft.)
MAX GATE LENGTH
cantilever (ft.)
RECOMMENDED CYCLES/ HR.
(lbs.)
MAX GATE LENGTH
1
1700
70
35
25
1-1/2
2100
80
40
25
2
2500
90
45
25
1-1/2 HP Model SL 595 150 11 G3 SL 595 150 21 G3
MAX GATE WT.
2 HP
Standard Features • Continuous Duty AC Motor • Larger Control Box • Integrated 3-Button Control Station • Built-in Radio Receiver • GL Logic Control Board • Interrupt & Exit Loop Inputs • Supports Optional LiftMaster® Plug-in Loop Detectors • UL325-Compliant Entrapment Alarm with External Reset Button
Only the LiftMaster® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
Duty Cycle: Continuous
factory installed heater Thermostatically controlled fin heater modification, use suffix H3 (Sample: SL 595 100 11 H3) 65 32449 (115V & 575V)....................................List Price Upcharge $334.00 65 32448 (208V - 460V).....................................List Price Upcharge $352.00
OPTIONS
• Adjustable Inherent Entrapment Protection System
Optional Features
• Timer-to-Close (0-180 seconds)
Model
Description
CPS-N4 LiftMaster®
List Price System®................................................................ $243.00
• Additional Nickel-Plated Chain - Bulk Pack
Commercial Protector Thru-beam photo-eyes, 45 ft. sensing distance, NEMA 4
• Integrated Maglock Control
• Fire Access Release Kit
LiftMaster® Plug-in Loop Detector. Designed............................................................... $334.00 for and tested with SL595 operators
• Advanced Dual Gate Operation – Simple 2-wire connection
Refer to the Modifications Section for additional options applicable to this model.
G71 416 7NH ACP17
Fire Access Release Kit, T-handle releases chain........................................................ $153.00
G19 3025
#50 Nickel-Plated Chain – 25 ft. bulk pack.............................................See Parts Price Book
• Industrial-Size 0 Across-the-Line Magnetic Reversing Contactor
SLIDE GATE
CPS-N4
G71 416 7NH
• High-Starting Torque, Continuous-Duty Industrial Motor with Overload Protection • Selectable Gate Movement Warning Alarm • Heavy-Duty Wormgear-in-Oil Gear Reducer
TECHNICAL INFORMATION
• Gate Speed of 12 Inches per Second
OPERATOR AMP RATING (RUNNING) VAC 1 HP 1-1/2 HP 2 HP 115-1Ø 13.6 17.5 — 208-1Ø 7.0 9.4 — 208-3Ø 4.0 6.6 6.6 230-1Ø 6.8 8.7 — 230-3Ø 3.6 6.2 6.2 460-3Ø 1.8 3.1 3.1 575-3Ø 1.4 2.5 2.5
• Fully Adjustable Driven Limit System • Automatic Braking System
voltage pHASE 60 HZ
SLIDE GATE
• 24VAC Accessory Power Output
Built-in LiftMaster® 312HM Radio Receiver standard for use with DIP Switch and Security+® remote controls.
Model SL 595 200 83 G3 SL 595 200 23 G3 SL 595 200 43 G3 SL 595 200 53 G3
• Post Mount • Supplied with 25 ft. of #50 Nickel-Plated Chain • Adjustable Friction Clutch System • Weather-Resistant Lockable Enclosure Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
52
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
Shipping Weight: 270 lbs.
53
VSL 595 Variable Speed Heavy-Duty Industrial Slide Gate Operator
Recommended Capacities
Variable-Speed, Extreme Heavy-Duty Operator Designed for Maximum Security Applications Such as Airports, Manufacturing Plants or Other Areas Where Securing an Opening Quickly Is Important
• Built-in Radio Receiver • GL Logic Control Board • Interrupt & Exit Loop Inputs • Supports Optional LiftMaster® Plug-in Loop Detectors
MAX GATE WT. (lbs.)
1
1700
MAX GATE WIDTH
MAX GATE WIDTH
RECOMMENDED CYCLES/HR.
70
35
25
(ft. - overhead/v-groove)
(ft. - cantilever)
Duty Cycle: Continuous
operators Model VSL595 100 11 H3*
Volts 115
Ph 1
Hz List Price 60.........................................$6,678
*Thermostatically controlled fin heater factory installed.
OPTIONS
2-Year Warranty
• Continuous Duty DC Motor
HP
Capable of quickly ramping up to speeds as fast as 2.2 feet per second, the extremely powerful design supports gate lengths up to 70 ft. and 1,700 pounds. Fully enclosed NEMA 3R, oiltight, weatherproof, lockable cabinet and a high-starting torque, variable-speed, continuous-duty industrial DC motor ensure rugged and reliable performance. This model is ideal for the heaviest high-security installations.
Standard Features:
ORDERING
Built-in LiftMaster® 312HM Radio Receiver standard for use with DIP Switch and Security+® remote controls.
Model G71 416 7NH
Description List Price LiftMaster® Plug-in Loop Detector.......................................................$334.00 Designed for and tested with VSL595 operators
50SL1FAR
Exterior Manual Release Firebox..........................................................$238.00
G19 3025
#50 Nickel-Plated Chain – 25 ft. bulk pack.................... See Parts Price Book (Includes two master links)
G71 416 7NH
Only the LiftMaster® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
SLIDE GATE
• 24VAC Accessory Power Output
Standard Features Cont.
• Entrapment Alarm with External Reset
• Supplied with 25 ft. of #50 Nickel-Plated Chain
• Adjustable Inherent Obstruction Detection System
• Adjustable Friction Clutch System
• Full Systems Capability – Compatible with most access control devices and safety accessories
• Weather-Resistant Lockable Hinged Enclosure
• Timer-to-Close (0-180 seconds)
Optional Features
• Integrated Maglock Control
• Additional Nickel-Plated Chain – Bulk Pack
• Advanced Dual Gate Operation – Simple 2-wire connection
• Exterior Manual Release Firebox
• Industrial-Size 0 Across-the-Line Magnetic Reversing Contactor
Refer to the Modifications Section for additional options applicable to this model.
• High-Starting Torque, Continuous-Duty Industrial DC Motor
SLIDE GATE
• Manual Disconnect
TECHNICAL INFORMATION OPERATOR AMP RATING (RUNNING)
voltage pHASE 60 HZ
• Selectable Gate Movement Warning Alarm • Heavy-Duty Wormgear-in-Oil Gear Reducer • Gate Speed up to 2.2 ft. per Second
VAC
AMPS
115-1Ø
13.6
• Fully Adjustable Driven Limit System • Automatic Braking System • Standard Manual Release System • Cycle Counter • Post Mount
54
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
Shipping Weight: 270 lbs.
55
HS 670 Heavy-Duty Industrial Hydraulic Slide Gate Operator
ORDERING
Recommended Capacities
1 HP
Heavy-Duty Industrial Hydraulic Slide Gate Operator for HighFrequency Commercial or Industrial Applications
Model HS 670 100 11 C3 HS 670 100 11 I3 HS 670 100 21 C3 HS 670 100 21 I3 HS 670 100 23 C3 HS 670 100 23 I3 HS 670 100 43 C3 HS 670 100 43 I3 HS 670 100 83 C3 HS 670 100 83 I3
The heavy-duty design supports gate lengths up to 80 ft. and gate weights up to 5,000 lbs. Powder coated weather-resistant steel enclosure and a continuous-duty industrial hydraulic motor ensure strong, dependable performance. This model is UL325compliant for Class I, II, III and IV.
Volts 115 115 230 230 230 230 460 460 208 208
Ph 1 1 1 1 3 3 3 3 3 3
Hz List Price 60....................................$7,791.00 60....................................$7,791.00 60....................................$7,791.00 60....................................$7,791.00 60....................................$7,791.00 60....................................$7,791.00 60....................................$7,791.00 60....................................$7,791.00 60....................................$7,791.00 60....................................$7,791.00
Volts 230 460 208
Ph 3 3 3
Hz List Price 60....................................$8,992.00 60....................................$8,992.00 60....................................$8,992.00
HP
MAX GATE MAX GATE RECOMMENDED WT. LENGTH CYCLES/ (lbs.) (ft.) HR.
1
3000
80
continuous duty
2
5000
80
continuous duty
2 HP
2-Year Warranty
Model HS 670 200 23 I3 HS 670 200 43 I3 HS 670 200 83 I3
Note: Drive rail ordered separately
Standard Features • Continuous Duty AC Motor • Built-in Radio Receiver • 24VAC Accessory Power Output
OPTIONS
Only the LiftMaster® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
Commercial Protector Thru-beam photo-eyes, 45 ft. sensing distance, NEMA 4
G71 416 7NH
LiftMaster® Plug-in Loop Detector. Designed....................................... $334.00 for and tested with HS670 operators
Model
Description
List Price
CPS-N4 LiftMaster®
System®........................................ $243.00
MG4201310
Drive Rail, 8 ft. length, 2 clamps included.......................................... $132.00
• Adjustable Inherent Obstruction Sensing
MG4201311
Drive Rail, 20 ft. length, 2 clamps included........................................ $313.00
• Timer-to-Close (0-180 seconds)
MG4101688
Rail Clamp for Drive Rail............................................................................ N/C
Optional Features
• Continuous-Duty Industrial Hydraulic Motor
• LiftMaster® Plug-in Loop Detector
• Integrated Maglock Control
• Drive Rail (additional lengths)
• UL325-Compliant Entrapment Alarm
• Photo-Eyes
• Interrupt & Exit Loop Detector Inputs
Refer to the Modifications Section for additional options applicable to this model.
• Supports Optional LiftMaster® Plug-in Loop Detectors • Maximum Run Timer (120 seconds) • Long-Distance Digital Logic Control (supports runs over 1000 feet)
G71 416 7NH
TECHNICAL INFORMATION 27"
NOTE: Not recommended for areas that experience extended periods of snow and ice.
OPERATOR AMP RATING (RUNNING) VAC
1 HP
2 HP
115-1Ø
14
–
230-1Ø
7
–
230-3Ø
4
6
460-3Ø
2
3
19 3/4"
• Gate Speed of 18 Inches per Second (I3) • Gate Speed of 12 Inches per Second (C3) • Fully Adjustable Driven Limit System 14"
• Standard Manual Release System
29 3/4"
• Baked-on High-Durability Powder Coat Finish
31 3/4"
26 1/2"
voltage pHASE 60 HZ
• Industrial Reversing Contactor
CPS-N4
SLIDE GATE
SLIDE GATE
• Full Systems Capability – Compatible with most access control devices and safety accessories
Built-in LiftMaster® 312HM Radio Receiver standard for use with DIP Switch and Security+® remote controls.
• Pad Mount • Hydraulic Braking System Automated gate vehicular systems should be constructed and installed
to industry standard UL325 and ASTM F2200. Ensure Primary and HS670 DIMENSIONAL ART Secondary Entrapment Protection is installed and functioning properly.
56
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
Shipping Weight: 250 lbs.
57
HCT Commercial High-Traffic Overhead Gate Operator
operators
Meeting the Challenge of Today’s High-Cycle Applications by Providing the Ultimate in Durability, Quiet Operation and Security
Standard Features • Gear Reduction
• Built-in Radio Receiver • Noise Isolators • Trolley Assembly and Key Release • Digital Motor Protection • Electronic Inputs • Timer • Power Input On/Off Switch • Spike Suppressors
HCT5011O3-10
Overhead Operator for 10 ft. gate.....................................................$2,569.00
HCT5011O3-12
Overhead Operator for 12 ft. gate.....................................................$2,713.00
Model Q07710
Description List Price 10 ft. ............................................................................... See Parts Price Book
Q07712
12 ft................................................................................. See Parts Price Book
Q07714
14 ft................................................................................. See Parts Price Book
OPTIONS Model Description List Price CPS-N4 LiftMaster® Commercial Protector System®.......................................$243.00 Thru-beam photo-eyes, 45 ft. sensing distance, NEMA 4
Built-in LiftMaster® 312HM Radio Receiver standard for use with DIP Switch and Security+® remote controls. Only the LiftMaster® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
• Advanced Control Board • Electronic Reversing Device
Description List Price Overhead Operator for 8 ft. gate.......................................................$2,426.00
OmniControl™ Board This advanced electronic control board offers many integrated functions to simplify installation and to provide added flexibility. In addition, the built-in surge suppression circuit protects the entire system from lightning & strikes. LiftMaster® Elite Series™ Plug-in Loop Detector offers simplicity of installation and optional modules are available to provide added functionality to your gate operator installation.
AELD LiftMaster® Elite Series™ Plug-in Loop Detector................................$189.00 Includes sensitivity boost. Designed for and tested with CSW200, SL3000 and HCT operators GHCPCK1
Omni Package. Includes OMNIEXB Omni..............................................$100.00 option board and G02103 3-button station
MG1300RLY PKG
LiftMaster® Elite Series™ Maglock Package......................................$525.00 Includes MG1300 maglock and Q400MAU 2-Amp relay module
K71-50787
Extended Travel Kit. Includes fine-thread......................... See Parts Price Book limit shaft and two limit nuts (call Technical Support for application info)
71-REDGRN-HCT
Red/Green Warning Light Box for traffic control...................................$263.00
APRS
Proximity Reed Switch. Can be used to activate....................................$41.00 additional devices such as an alarm
STAR450-315
Universal Receiver with Antenna. 315MHz, holds................................$81.85* up to 450 remote controls. Ideal for parking lots, gated communities and garages
AELD
GHCPCK1
OVERHEAD GATE
OVERHEAD GATE
5-Year Commercial Warranty
Model HCT5011O3-8
REPLACEMENT TRACK
Specifically engineered to meet the low clearance needs of apartment houses and condominiums, the model HCT delivers unsurpassed safety, dependability and quiet operation. In a class by itself, the HCT is a heavy-duty, high-traffic operator designed with many exclusive features, including a Security+® receiver, built-in electronic reversing device, heavy-duty track and keyed trolley assembly. The HCT is designed for installation in even the tightest applications. At only 8 inches high, it’s up to 10 inches shorter than other overhead operators. It’s also much quieter so as not to disturb tenants living directly above the garage. For added safety, the HCT includes a key release feature for instant access in case of power failure. And all components are fully enclosed to greatly reduce the risk of injury.
7-Year Residential Warranty
ORDERING
MG1300
STAR450-315
*See radio control pricing; gate multiplier not applicable.
TECHNICAL INFORMATION
• Alternate Outputs • Travel Time
Variable Operating Lengths
• On-Board 3 Push-Button Control
19"
• Motor Drive • Safety Alarm
Shipping Weight:
• Supports Optional LiftMaster® Elite Series™ Plug-in Loop Detector
HCT501103-8: 150 lbs. HCT501103-10: 154 lbs. HCT501103-12: 158 lbs.
• #41 Black Oxide Chain
8"
Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
58
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
59
TABLE OF CONTENTS BARRIER GATE OPERATORS
Mega Arm/Tower
Heavy-Duty DC Barrier Gate Operator........................... 62
Mega Arm Sprint/Tower
Heavy-Duty High-Speed DC Barrier Gate Operator........ 64
BG 770
Industrial-Duty Barrier Gate Operator............................. 66
BG 790
Industrial-Duty Wishbone Barrier Gate Operator............. 68
BARRIER GATE 61
MEGA ARM/MEGA ARM TOWER Heavy-Duty DC Barrier Gate Operator
ORDERING operators
High-Performance, DC-Powered Barrier Gate Operators with Built-in Battery Backup
Model Volts 110/220 MADCBB3 (2 batteries included standard)
Ph 1
Hz List Price 50-60..................................$2,629.00
110/220 MATDCBB3 (2 batteries included standard)
1
50-60..................................$2,820.00
The Mega Arm and Mega Arm Tower are DC-powered, highperformance additions to the LiftMaster® family of gate operators. Designed with a 24VDC (1/2 HP equivalent) motor, these models provide exceptional starting torque and continuous operation, making them ideal for most applications. Constructed with an aluminum alloy chassis, they’re corrosion resistant and light enough for one person to carry and install. The heavy-duty motor supports 6,000 cycles per day with an operator speed of 2.5 seconds to open or close. This model is UL325 and UL991compliant for Class I, II, III and IV.
Note: Gate arms ordered separately.
• Continuous Duty DC Motor • Built-in Radio Receiver • Built-in Battery Backup (batteries included) • Magnetic Sensors • Soft Start/Stop • DC Operator System • Control Inputs • Inherent Obstruction Sensing • LED Indicators • Dynamic Braking
MAT
MA
Built-in LiftMaster® 312HM Radio Receiver standard for use with DIP Switch and Security+® remote controls. Only the LiftMaster® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
Optional Features
Model MA024
Description List Price 12 ft. Aluminum Arm, Round, Yellow/Black Stripes.................................................................................................................$214.00
MA024RDOT
12 ft. Aluminum Arm, Round, Red/White Retro-Reflectorized DOT Tape...................................................................................$249.00
MA116
17 ft. Aluminum Arm, Round, Yellow/Black Stripes.................................................................................................................$262.00 Requires counterweight model MA117
MA116RDOT
17 ft. Aluminum Arm, Round, Red/White Retro-Reflectorized DOT Tape...................................................................................$296.00 Requires counterweight model MA117
MA025
12 ft. Aluminum Arm with Yellow Padding...............................................................................................................................$214.00 Requires adapter collars model MA031
MA028
14 ft. Aluminum Arm with Yellow Padding...............................................................................................................................$237.00 Requires adapter collars model MA031
MA117
Counterweight. Required for all 15 ft. barrier arms...................................................................................................................$81.00
MA031
Adapter Collars. Required for all padded barrier arms..............................................................................................................$14.20
*See Accessory Section for complete list of barrier arms and accessory options.
options Model RETROAB
Description List Price 12VDC, 24VAC/DC Retro-Reflective Photo-Eyes.......................................................................................................................$182.00
SAMSKIT
Sequenced Access Management functionality between any Mega Arm operator.......................................................................$38.00 and SL3000, CSW200, Mega Swing, Mega Slide, Mega Slide-X operators Thermostat Control Heater, Plate. For temperatures below 32°F (For use with Mega Arm only)..............................................$162.00
UN201
Thermostat Control Heater, Plate. For temperatures below 32°F (For use with Mega Arm Tower only)....................................$195.00
• Heater
MA230VKIT
Voltage Conversion Kit, converts from 115VAC to 230VAC operation.........................................................................................$10.00
Refer to the Modifications Section for additional options applicable to this model.
MA005C
Slip Clutch Option. Protects shear pin if barrier arm is forced up...........................................................................................$147.00
MBAT
7Ah 12V Battery, Single (2 required per operator).....................................................................................................................$31.00
Battery Backup
• Breakaway Arm
Built-in Battery Backup provides seamless operation of the gate operator and all DC control and sensing devices in the event of a power loss.
TECHNICAL INFORMATION OPERATOR AMP RATING (RUNNING)
Battery Backup Operation: 900 Cycles (12 ft. barrier arm)
• MOVs for Additional Surge Protection • Tailgate Alarm – Senses Tailgating Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
62
Duty Cycle: Continuous
MA201
• Right- or Left-Handed Operation
• Ability to Auto-Open When Power Fails
6,000
14
soft-padded arm
• Sequenced Access Management
• Aluminum Alloy Chassis
• Safety-Stop Tailgate Feature
aluminum arm
Barrier Arms*
• Timer-to-Close
• Universal Controller with 8 Inputs
1/2*
RECOMMENDED CYCLES/DAY
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
BARRIER GATE
BARRIER GATE
• Dual Gate Operation
MAX GATE LENGTH (ft.) 12 & 15
voltage pHASE 60 HZ
Standard Features
HP
*equivalent 24VDC
2-Year Warranty electronics and mechanism 10-Year Warranty chassis and cover
Recommended Capacities
VAC
1/2 HP EQUIVALENT
110/220
6.5
Shipping Weight: MA: 98 lbs.; MAT: 130 lbs.
63
MEGA ARM SPRINT/SPRINT TOWER Heavy-Duty High-Speed DC Barrier Gate Operator
ORDERING operators
High-Speed, DC-Powered Barrier Gate Operators with Built-in Battery Backup
Model Volts Ph Hz List Price 110/220 1 50-60..................................$2,756.00 MASDCBB3 (2 batteries included standard)
HP
MASTDCBB3 110/220 1 50-60..................................$2,947.00 (2 batteries included standard)
The Mega Arm Sprint and Mega Arm Sprint Tower are DC-powered, high-speed additions to the LiftMaster® family of gate operators. Designed with a 24VDC (1/2 HP equivalent) motor, these models provide exceptional speed, making them ideal for parking applications. Constructed with an aluminum alloy chassis, they’re corrosion resistant and light enough for one person to carry and install. The heavy-duty motor supports 10,000 cycles per day with an operator speed of 0.9 second to open or close. This model is UL325 and UL991-compliant for Class I, II, III and IV.
1/2*
Note: Gate arms ordered separately.
*equivalent 24VDC
MAX GATE LENGTH (ft.)
RECOMMENDED CYCLES/DAY
8
10,000
soft-padded arm
Duty Cycle: Continuous
Barrier Arms
2-Year Warranty electronics and mechanism 10-Year Warranty chassis and cover
Recommended Capacities
Model SP8
Description List Price 8 ft. Aluminum Arm with Yellow Padding.................................................................................................................................$209.00 Requires adapter collars model MA031
SP8PAD
8 ft. Replacement Yellow Foam Padding....................................................................................................................................$97.00
SP8TUBE
8 ft. Replacement White Aluminum Arm..................................................................................................................................$117.00
MA031
Adapter Collars. Required for all padded barrier arms..............................................................................................................$14.20
Note: Only SP8 Barrier Arms work with Mega Arm Sprint/Tower operators. MAST
MAS
options
Standard Features • Continuous Duty DC Motor • Built-in Radio Receiver • Built-in Battery Backup (batteries included) • Soft Start/Stop • DC Operator System • Control Inputs • Inherent Obstruction Sensing • LED Indicators • Dual Gate Operation • Magnetic Sensors
Description List Price 12VDC, 24VAC/DC Retro-Reflective Photo-Eyes.......................................................................................................................$182.00 UL listed to UL325 Standards. 30 ft. sensing distance. Includes photo-eye hood
SAMSKIT
Sequenced Access Management functionality...........................................................................................................................$38.00 between any Mega Arm operator and SL3000, CSW200, Mega Swing, Mega Slide, Mega Slide-X operators
MA201
Thermostat Control Heater, Plate. For temperatures................................................................................................................$162.00 below 32°F (For use with Mega Arm Sprint only)
UN201
Thermostat Control Heater, Plate. For temperatures................................................................................................................$195.00 below 32°F (For use with Mega Arm Sprint Tower only)
MA230VKIT
Voltage Conversion Kit, converts from 115VAC..........................................................................................................................$10.00 to 230VAC operation
• Sequenced Access Management
MA005C
Slip Clutch Option. Protects shear pin if barrier arm is forced up...........................................................................................$147.00
• Heater
MBAT
7Ah 12V Battery, Single (2 required per operator).....................................................................................................................$31.00
Built-in LiftMaster® 312HM Radio Receiver standard for use with DIP Switch and Security+® remote controls. Only the LiftMaster® Security+® remote controls offer you the benefits of rolling code technology and compatibility with the nation’s largest network of residential and commercial door operators.
Optional Features Refer to the Modifications Section for additional options applicable to this model.
TECHNICAL INFORMATION
• Timer-to-Close • Aluminum Alloy Chassis • Breakaway Arm • Universal Controller with 8 Inputs • Safety-Stop Tailgate Feature • Ability to Auto-Open When Power Fails
OPERATOR AMP RATING (RUNNING)
Battery Backup Built-in Battery Backup provides seamless operation of the gate operator and all DC control and sensing devices in the event of a power loss.
voltage pHASE 60 HZ
• Right- or Left-Handed Operation
Battery Backup Operation: 900 Cycles (8 ft. barrier arm)
• Tailgate Alarm – Senses Tailgating
Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
64
BARRIER GATE
BARRIER GATE
• Dynamic Braking
Model RETROAB
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
VAC
1/2 HP EQUIVALENT
110/220
6.5
Shipping Weight: MAS: 99 lbs.; MAST: 115 lbs.
65
BG 770 Industrial-Duty Barrier Gate Operator
ORDERING operators
Reliable Performance Barrier Gate Operator for Industrial Applications
Model BG 770 50 11 BG 770 50 21 BG 770 50 81 BG 770 50 83 BG 770 50 23 BG 770 50 43 BG 770 50 53
Engineered for the highest durability and safety, this powerfully designed barrier gate operator supports arm lengths up to 15 ft. and arms weighing up to 25 lbs. A heavy-duty 1/2 HP industrial motor with overload protection supports 100 cycles per hour. This model meets UL325 standards for Class I, II, III and IV.
Ph 1 1 1 3 3 3 3
Hz List Price 60....................................$2,871.00 60....................................$2,871.00 60....................................$2,871.00 60....................................$2,871.00 60....................................$2,871.00 60....................................$2,871.00 60....................................$2,871.00
HP
MAX GATE MAX GATE RECOMMENDED WT. (lbs.) LENGTH (ft.) CYCLES/HR.
1/2
25
15*
100
*15 ft. achieved with PVC Arm only Duty Cycle: Continuous
Note: Gate Arms ordered separately.
Barrier Arms
2-YEAR WARRANTY
Standard Features • Continuous Duty AC Motor • Power On/Off Switch
Arm ordered separately
• Two-Button Control Station, Open/Close
Model G65 1209 P
Description List Price 10 ft. PVC Arm, Square, Yellow/Black Stripes,.........................................................................................................................$181.00 Requires clamp model G108019
G651209
12 ft. Wood Arm, White/Black Stripes......................................................................................................................................$230.00
15ALUMARM
15 ft. Aluminum Arm, Square, Yellow/Black Stripes................................................................................................................$366.00
G108019
PVC Arm Mounting Clamp..........................................................................................................................................................$91.00
G50 FL120 24
24VAC/DC Flexible Red Rope Light, 10 ft.................................................................................................................................$132.00
options
• 24VAC Control Circuit
Model RETROAB
Description List Price 12VDC, 24VAC/DC Retro-Reflective Photo-Eyes.......................................................................................................................$182.00 UL listed to UL325 standards. 30 ft. sensing distance. Includes photo-eye hood
G71 416 7NH
LiftMaster® Plug-in Loop Detector...........................................................................................................................................$334.00
G65 18300
Thermostat Control Heater, Fin Type (115V & 575V)................................................................................................................$334.00
G65 19084
Thermostat Control Heater, Fin Type (208-460V).....................................................................................................................$387.00
G90PGR
Single Channel Radio Modification. Allows for the............................................................................................... See Parts Price Book addition of a 312HM or 412HM receiver
G50402
Timer Defeat – Hold Open Switch. Allows the ...........................................................................................................................$44.00 auto-close timer to be manually disabled
• 11-Gauge Steel Cabinet with Weather-Resistant Baked-on Powder Coat Finish
G903010*
Primary/Secondary Configuration and/or.............................................................................................................$125.00 per operator Reverse Cabinet/Rotation Configuration (See Configuration Options)
• Opening Time of 4 Seconds
*Factory installed only. May require up to 2-week lead time.
• Full Systems Capability – Compatible with most access control devices and safety accessories • Supports Optional LiftMaster Plug-in Style Loop Detectors for Exit and Hold Open Loops ®
Configuration Options BG770
Access Panel
Inside
• Electrical Controls in Separate Removable Enclosure • Heavy-Duty Gear Reducer • Continuous-Duty 1/2 HP Commercial Motor • Fully Adjustable Driven Limit System
Reverse Cabinet w/ Standard Rotation
Outside Standard Cabinet w/ Standard Rotation
• Removable Top and Side Panels for Easy Access BG770
Obstruction
TECHNICAL INFORMATION 17"
Optional Features
OPERATOR AMP RATING (RUNNING)
Inside
• Heater
Standard Cabinet w/ Reverse Rotation
• Timer-to-Close Module: Adjustable for 1 second-17 minutes
Outside
Refer to the Modifications Section for additional options applicable to this model.
17" REMOVABLE SIDE & TOP ACCESS PANELS
Access Panel
Reverse Cabinet w/ Reverse Rotation
Obstruction
SINGLE ARM – UP TO 15 FT.*
44" 35"
*PVC Arm
Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
BG770 DIMENSIONAL ART
66
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
BARRIER GATE
• Pad Mount
voltage pHASE 60 HZ
• One 115VAC Accessory Outlet (on 115VAC models only)
BARRIER GATE
Volts 115 230 208 208 230 460 575
Recommended Capacities
VAC
1/2 HP
115-1Ø
6.6
208-1Ø
3.8
208-3Ø
2.2
230-1Ø
3.3
230-3Ø
2.0
460-3Ø
1.0
575-3Ø
0.8
Shipping Weight: 225 lbs.
67
BG 790 Industrial-Duty Wishbone Barrier Gate Operator
ORDERING operators
Reliable Gear-Driven Barrier Gate Operator for Industrial Applications This barrier gate is designed for Wishbone-Type Arms with lengths up to 24 ft. Powder coated weather-resistant steel enclosure and a 1/2 HP commercial motor ensure strong, dependable performance. This model meets UL325 standards for Class I, II, III and IV.
2-YEAR WARRANTY
Model BG 790 50 11
Volts 115
Ph 1
Hz List Price 60....................................$4,586.00
BG 790 50 21
230
1
60....................................$4,586.00
BG 790 50 81
208
1
60....................................$4,586.00
BG 790 50 83
208
3
60....................................$4,586.00
BG 790 50 23
230
3
60....................................$4,586.00
BG 790 50 43
460
3
60....................................$4,586.00
BG 790 50 53
575
3
60....................................$4,586.00
Recommended Capacities HP
MAX GATE MAX GATE RECOMMENDED WT. (lbs.) LENGTH (ft.) CYCLES/HR.
1/2
50
24
25
Duty Cycle: Continuous
Barrier Arms
Standard Features • Continuous Duty AC Motor
Model G651208R
Description List Price Replacement Wishbone Arm, 24 ft., white/black.....................................................................................................................$440.00 stripes, no counterweight included (model G658056)
G50 FL120 24
24VAC/DC Flexible Red Rope Light, 10 ft.................................................................................................................................$132.00
• Power On/Off Switch
options
• Industrial-Size 0 Across-the-Line Reversing Starter
Model RETROAB
Description List Price 12VDC, 24VAC/DC Retro-Reflective Photo-Eyes.......................................................................................................................$182.00 UL listed to UL325 standards. 30 ft. sensing distance. Includes photo-eye hood
G71 416 7NH
LiftMaster® Plug-in Loop Detector...........................................................................................................................................$334.00
G65 18300
Thermostat Control Heater, Fin Type (115V & 575V)................................................................................................................$334.00
G65 19084
Thermostat Control Heater, Fin Type (208-460V).....................................................................................................................$387.00
G90PGR
Single Channel Radio Modification. Allows for the............................................................................................... See Parts Price Book addition of a 312HM or 412HM receiver
G50402
Timer Defeat – Hold Open Switch. Allows the ...........................................................................................................................$44.00 auto-close timer to be manually disabled
• Opening Time Approximately 11 Seconds
G903010*
Primary/Secondary Configuration and/or.............................................................................................................$125.00 per operator Reverse Rotation Configuration (See Configuration Options)
• Fully Adjustable Driven Limit System
*Factory installed only. May require up to 2-week lead time.
• 24VAC Control Circuit • Two-Button Control Station, Open/Close
Optional Features
• Electrical Controls in Separate Removable Enclosure
• Timer-to-Close Module: Adjustable for 1 second-17 minutes
• One 115VAC Accessory Outlet (on 115VAC models only) • Full Systems Capability – Compatible with most access control devices and safety accessories • Supports Optional LiftMaster® Plug-in Style Loop Detectors for Exit and Hold Open Loops • Heavy-Duty Gear Reducer
• Heater Refer to the Modifications Section for additional options applicable to this model.
Configuration Options
• 11-Gauge Steel Cabinet with Weather-Resistant Baked-on Powder Coat Finish
TECHNICAL INFORMATION
• Removable Top and Side Panels for Easy Access • Pad Mount
COUNTERWEIGHTED WISHBONE ARM
17"
22"
• Wishbone Arm (24 feet) and Counterweight Are Provided (max. length)
OPERATOR AMP RATING (RUNNING) 17"
Obstruction
UP TO 24 FT.
44" 35"
Standard Cabinet w/ Reverse Rotation
BG790 DIMENSIONAL ART Automated gate vehicular systems should be constructed and installed to industry standard UL325 and ASTM F2200. Ensure Primary and Secondary Entrapment Protection is installed and functioning properly.
68
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
voltage pHASE 60 HZ
REMOVABLE SIDE & TOP ACCESS PANELS
Access Panel
BARRIER GATE
BARRIER GATE
• Continuous-Duty 1/2 HP Commercial Motor
VAC
1/2 HP
115-1Ø
6.6
230-1Ø
3.3
208-3Ø
2.2
230-3Ø
2.0
460-3Ø
1.0
575-3Ø
0.8
Shipping Weight: 350 lbs.
69
$74.00
70
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
BG790
BG770
MAST
MAT
VSL595
HS670
BG790
BG770
MAST
MAT
HS670
SL595
VSL595
BG790
BG770
MAST
MAT
HS670
VSL595
SL585
SL595
BG790
BG770
MAST
MAT
HS670
VSL595
SL595
FOR USE WITH MODEL(S)
• •
BG Configuration
BG790
BG770
MAST
FOR USE WITH MODEL(S)
MAT
Description List Price BG Operator Configuration......................................................................................................................$125.00 per operator For Primary/Secondary configuration option, reverse cabinet option and/or reverse rotation option. Factory installed Only. May require lead time. HS670
Model G903010
VSL595
BG790
MAST
BG770
• •
• •
Description List Price Slip-Clutch Option......................................................................................................................................................$147.00 Protects the shear pin if a barrier arm is forced up. Arm will self-level after a car passes. Factory installed Only. May require lead time. SL585
Model MA005C
SL595
•
MAT
HS670
VSL595
SL595
SL585
SL575
SW470
SW420
FOR USE WITH MODEL(S)
•
SLIP CLUTCH
• •
Description List Price Timer-to-Close.............................................................................................................................................................$135.00 Provides an adjustable timer (1 sec. – 17 minutes) in the operator control circuit which will close the gate automatically after the preset, adjustable time interval. Will close the gate from any position other than full close, i.e., any mid-position as well as full open. If the timer has partially timed out, it can be reset to the full time interval by actuation of any open control or any safety device. May be factory or field installed.
• • • • •
SL585
BG790
FOR USE WITH MODEL(S)
TIMER-TO-CLOSE Model G71 26438
Description List Price Non-Resettable Counter................................................................................................................................................$74.00 A 6-digit non-resettable 24VAC electro-mechanical counter is mounted in the operator control enclosure. This counts the number of times the open coil is energized, corresponding to the number of complete gate cycles of use (counts both partial and complete cycles as one cycle each). Recommended for factory installation. SL575
Model G90 50 3000
SL575
• • • • •
BG770
MAST
MAT
HS670
VSL595
SL595
SL585
FOR USE WITH MODEL(S)
SL575
Three-Phase 100VA Transformer.................................................................................................................................$112.00 Upgrades the transformer in the operator enclosure from 60VA to 100VA. Provides additional control circuit power for auxiliary equipment such as loop detectors, gearbox heaters, electrical box heaters, and other devices. SW470
G90 100 OP3
SW420
Description List Price Single-Phase 100VA Transformer................................................................................................................................$112.00
• •
COUNTER
TRANSFORMER Model G90 100 OP1
SL585
FOR USE WITH MODEL(S)
Costly & Prohibited Combinations: Certain combinations of modifications may together cost more than the sum of the costs for the individual modifications, or may not even be possible. Please read carefully the detailed description of the modifications being considered. If there is any question about the above, consult a LiftMaster® representative.
Description List Price Long-Distance Control Wiring (24VAC).......................................................................................................................$145.00 A necessity when controls are to be located more than 100 feet from the operator. Allows up to 1,000 feet of control wiring between controls and operator with 16-gauge wire. WARNING: It is strongly recommended that all controls be located so that the person operating the control has a clear view of the gate opening and the moving gate. SL575
Model G50 24
Terminal strips for mounting radio receiver are not included on some operators. However, radios may still be electrically wired into ALL operators.
Modifications must be ordered at the same time the operator is ordered unless a kit part number is shown on the description page.
SL595
CONTROL WIRING
SL575
$125.00
Radio Control Wiring:
Modifications to Operators:
• • •
$147.00
• •
The modifications available above refer to only those gate operators listed. The other gate operators offered in this catalog may have these items as standard equipment. Please refer to the Gate Operator Section for the specific page on the operator you are interested in ordering for full details.
SL585
FOR USE WITH MODEL(S)
SW470
•
$145.00
SL575
• • • •
SW470
$24.00
• •
please note:
$135.00
SW470
BG Operator Configuration
Auxiliary Limit Switches with Wire Leads......................................................................................................................$34.00 Each switch, or pole, provides a means to control auxiliary lights, horns, or other equipment. The switch can .be used to turn on or off such equipment when the gate is fully opened or fully closed. When ordering, specify whether the auxiliary switch is required on the OPEN or CLOSE side of the control enclosure (corresponding to controlling auxiliary equipment when the gate is fully opened or fully closed, respectively). A maximum of two poles per operator may be supplied, one on the OPEN side and one on the CLOSE side. Each pole is SPDT, rated 10 amps and 250VAC. Recommended for factory installation.
SW470
G903010
G909210G2 (SL595)
SW470
Slip-Clutch Option
Description List Price Auxiliary Limit Switches with Wire Leads......................................................................................................................$24.00
SW420
MA005C
• • • • •
$112.00
Model G909210 (SL575 & SL585)
SW420
Non-Resettable Counter
$112.00
LIMIT SWITCHES
SW420
G90 50 3000
• • • • • •
LIST PRICE
SW420
Long-Distance Control Wiring (24VAC)
BG790
G50 24
• • • • • • • • • • • • • •
BG770
Auxiliary Limit Switches with Wire Leads
MAST
G909210
MAT
Timer-to-Close
HS670
G71 26438
VSL595
100VA Transformer, Three Phase
SL595
G90 100 OP3
SL585
100VA Transformer, Single Phase
SL575
G90 100 OP1
SW470
SW420
DESCRIPTION
SW420
MODIFICATIONS
PART NO.
GATE OPERATOR MODIFICATIONS
MODIFICATIONS
GATE OPERATOR MODIFICATIONS
MODIFICATIONS AT A GLANCE
• • 71
LA412 Solar Gate Access System Daily Cycle Chart
RSW & RSL Solar Gate Access System Daily Cycle Chart
LA412 Solar Gate Access System Daily Cycle Chart The LA412 Solar Gate Access System utilizes the innovative
Solar panel(s) must be located in an open area clear of obstructions
control board. The number of solar panels required is determined by
sunlight during the winter months. Cycle rate may vary from solar chart
® The LA412 SolarManagement Gate Access System utilizes the innovative Power Management System deliver ® Power EverCharge System to deliver power when needed EverCharge and shading for the entire day. Snow, heavy fog ortoheavy rainpower affect when needed most for operating a gate while minimizing power consumption at all other times. Power is provided to the most for operating a gate while minimizing power consumption at all solar panel performance and charge rate. The LA412 is not supported gate operator via batteries. The batteries are charged from a solar panel(s) connected to the operator control board. The other times. Power is provided to the gate operator via batteries. The in climates where temperatures reach below -4°F. This is due to the number of solar panels required is determined by whether the application is for a single or dual gate, daily cycle rate, batteries are charged from a solar panel(s) connected to the operator effect of cold weather on batteries and a reduced number of hours of number of accessories and region of the country.
the average solar radiation and the temperature effects on batteries in weeks during the winter Solarday. panels shouldheavy be cleaned Solar panel(s) locatedand in weather an open area clear obstructions and shading formonths. the entire Snow, fog or the given regions.must Local be geography conditions mayof require regularly to ensure proper operation. heavy rain affect solar panel performance and charge rate. The LA412 is not supported in climates where temperatures additional solar panels. Low Power Draw or Wireless Accessories are reach below in -4°F. is due power to thedraw, affect coldaccessories weather on batteries and a reduced number of hours of sunlight during recommended orderThis to minimize asof added the winter months. Cycle rate may vary from solar chart for areas that reach below 32°F. Optional external power reserve draw power and affect the daily cycle rate. model BIGBTYKIT (80Ah battery not included) or extra large control box model LA412CONTXLM (with 33Ah battery) recommended for applications that reach below 32°F (and above -4°F) for more than 2 consecutive weeks during the winter months. Solar panels should be cleaned regularly to ensure proper operation. 3
4
Not Available
The map and daily cycle rate shown are approximations based upon the average solar radiation and the temperature effects on batteries in the given regions. Local geography and weather conditions may require additional solar panels. Low Power Draw or Wireless Accessories are recommended in order to minimize power draw, as added accessories draw power and affect the daily cycle rate.
Solar panel(s) must be located in an open area clear of obstructions and shading for the entire day. Snow, heavy fog or heavy rain affect solar panel performance and charge rate. The RSW & RSL are not supported in climates where temperatures reach below -4°F. This is due to the effect of cold weather on batteries and a reduced number of hours of sunlight during the winter months. Cycle rate may vary from solar chart for areas that reach below 32°F. Optional 33 Amp/ hour battery is recommended for applications that reach below 32°F (and above -4°F) for more than 2 consecutive weeks during the winter months. Solar panels should be cleaned regularly to ensure proper operation.
SOLAR CYCLE CHARTS
4
3
Not Available
4
1
2
1 1
Number identifies zone. LA412 not supported/available in Zone 4
10 10 10
Arm Only
50
50
28
Exit Loop(LM202)
50 50 50
50 50 50
25 26 26
Arm Only
50
50
46
Exit Loop(LM202)
23 23 23
7 6 6
Arms Only
50
50
20
Exit Loop(LM202)
50 50 50
50 50 50
18 18 18
Arms Only
50
50
30
Loop(LD7LP)
20W SOLAR
2 PANEL
Loop(LD7LP)
30W SOLAR
3 PANEL
Accessories Solenoid Lock(SGLOCK12V) Loop(LD7LP)
30W SOLAR
3 PANEL
Accessories Solenoid Lock(SGLOCK12V) Loop(LD7LP) Exit Loop(LM202)
50 50 50
(6 Hrs sunlight/day)
50 50 50
Solenoid Lock(SGLOCK12V)
Accessories Solenoid Lock(SGLOCK12V)
Accessories 50 50 50
40 44 44
Solenoid Lock(SGLOCK12V) Loop(LD7LP) Exit Loop(LM202)
50 50 50
50 50 50
27 28 28 LMGSCCT
72
Zone 1
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
20W SOLAR PANEL
✔ ✔ ✔ ✔
30W SOLAR PANEL
✔ ✔ ✔ ✔
Dual Gate Installations (16 ft. 400 lb. gate) Zone 2 (4 Hrs Sunlight/day)
Zone 3
Accessories
Zone 1
(2 Hrs Sunlight/day)
50 48 50 41 1 50 50 50 50 30
50 50 50 49 9 50 50 50 50 43
38 32 30 21 0 50 48 50 41 1
43 36 35 26 0 50 50 50 49 9
20 17 12 3 0 31 26 24 15 0
(6 Hrs sunlight/day)
20W SOLAR PANEL
✔ ✔ ✔ ✔
30W SOLAR PANEL
✔ ✔ ✔ ✔
Zone 2 (4 Hrs Sunlight/day)
Zone 3 (2 Hrs Sunlight/day)
1 33AH Battery (optional)
2 PANEL
Accessories
1 33AH Battery (optional)
20W SOLAR
Single Gate Installations (16 ft. 400 lb. gate)
8
2 7AH Batteries (optional)
Exit Loop(LM202)
35 31 31
Loop(LD7LP)
Zone 3
Accessories
50 50 50
Solenoid Lock(SGLOCK12V)
25
1 33AH Battery (optional)
Accessories
50
2 7AH Batteries (optional)
Arms Only
300 mA
1 PANEL
100 mA
Zone 1 Zone 2 10W SOLAR
50 mA
12
Solenoid Lock
Zone 3
1 33AH Battery (optional)
40
300 mA
50
100 mA
Arm Only
50 mA
1 PANEL
NUMBER OF CYCLES PER DAY
1 33AH Battery (optional)
Zone 1 Zone 2 10W SOLAR
Number identifies zone. RSW & RSL not supported/available in Zone 4
2 7AH Batteries (optional)
Dual Arm Installations
1 33AH Battery (optional)
NUMBER OF CYCLES PER DAY
Single Arm Installations
2 7AH Batteries (optional)
NUMBER OF CYCLES PER DAY
Solenoid Lock
SOLAR CYCLE CHARTS
The map daily cycle shown aregate, approximations upon the average solar radiation the temperature whether theand application is for rate a single or dual daily cycle rate,based for areas that reach below 32°F. Optionaland external power reserve model effects onaccessories batteries and in the given regions. may solar panels. number of region of the country.Local geography and weather BIGBTYKITconditions (80Ah battery not require included)additional or extra-large control box model Low power draw or Wireless Accessories are recommended in LA412CONT order to minimize power draw, recommended as added accessories draw XLM (with 33Ah battery) for applications The mapand andaffect daily cycle approximations based upon power the rate dailyshown cycleare rate. that reach below 32°F (and above -4°F) for more than 2 consecutive
The RSW & RSL Solar Gate Access System utilizes the innovative EverCharge® Power Management System to deliver power when needed most for operating a gate while minimizing power consumption at all other times. Power is provided to the gate operator via batteries. The batteries are charged from a solar panel(s) connected to the operator control board. The number of solar panels required is determined by whether the application is for a single or dual gate, daily cycle rate, number of accessories and region of the country.
25 23 22 18 0 39 35 35 31 13
29 27 26 22 4 45 41 41 37 19
17 15 13 9 0 25 23 22 18 0
19 17 15 12 0 29 27 26 22 4
9 8 5 1 0 14 13 10 6 0 LMGTCTRSLW
73
TABLE OF CONTENTS GATE OPERATOR ACCESSORIES Safety Photo-Eyes........................................................................................................................ 76 Sensing Edges................................................................................................................... 77 Emergency Devices, Fire Access Boxes............................................................................ 78 Audible/Visible Warning Devices, Warning Signs/Labels....................................................... 79
Loops Loop Detectors................................................................................................................. 80 Preformed Loop Wire, Loop Wire Spools, Sealant.............................................................. 82 Sensing Probes................................................................................................................. 83
Hardware Hinges, V-Track................................................................................................................ 84 Wheels, Wheel Covers........................................................................................................ 85 Guide Rollers..................................................................................................................... 86 Jamb-Track Assembly....................................................................................................... 87 Miscellaneous Hardware, Bulk Pack Chain........................................................................ 88
Timers 7-Day Timers, Miscellaneous Timers.................................................................................. 89
ACCESSORIES
Locks Magnetic Locks................................................................................................................. 90 Solenoid Locks.................................................................................................................. 91
Barrier Arms Barrier Arms for Mega Operators...................................................................................... 92 Barrier Arms for BG Operators......................................................................................... 94
Heaters Heaters............................................................................................................................. 95
Field Kits and Modules Field Kits and Modules...................................................................................................... 96
Mounting Accessories Mounting Accessories for Operators and Control Boxes.................................................... 98
Power Solar Panels, Power Backup, Batteries............................................................................. 99 Surge Suppressors, Power Supply.................................................................................. 100 Installation Wire................................................................................................................ 101
Access Control Pedestals........................................................................................................................ 102 Wireless Keypads/Push Buttons...................................................................................... 103 Receivers and Remote Controls...................................................................................... 104 Control Stations.............................................................................................................. 106
75
GATE OPERATOR ACCESSORIES SAFETY
SAFETY
UL325 recommends the installation of entrapment protection devices to protect in both the open or close directions and to protect between the moving gate and rigid objects such as a post or wall. WARNING: It is strongly recommended that some type of safety equipment be used with every gate operator. Without safety equipment serious injury or death may result!
IMPORTANT NOTES: 1. Use only electric edges on gates 2. Specify length of edge when ordering (4 ft. min.) 3. A coil cord or wireless sensing edge connection is required with all edges
Mounting Channel
Model
50-220
GCPS N4
CPS-UN4
THRUIR55
G501RB325
List Price
$83.00
$243.00
$202.00
$244.00
$303.00
Power
Works only with LiftMaster® LA100, LA412, RSL and RSW operators
24VAC
Works only with LiftMaster® LA100, LA400, LA412, RSL and RSW operators
12-24 VAC/DC
12-24 VAC/DC
Standby/ Detect Current
Model
G65 MG020 4*
G65 MG020 5*
G65 ME120 C5*
<2mA Low Power
Unrated
<31mA Low Power
20mA/30mA
135mA/150mA
List Price
$186.00
$197.00
$25.00
Listing
UL listed to UL325 standards. Tested with operators listed.
UL listed to UL325 standards. Tested with operators listed.
UL listed to UL325 standards. Tested with operators listed.
ETL listed to UL325 standards
ETL listed to UL325 standards
Length
4 ft.
5 ft.
5 ft.
Outdoor Rated
Description
2-wire electric edge for gates
2-wire electric edge for gates
Mounting channel for all MG020 edges
Weather-resistant
NEMA 4
NEMA 4
NEMA 4
NEMA 3, 3R, 4, 4X, 12 & 13
Sensing Distance
30 ft.
45 ft.
45 ft.
165 ft.
65 ft.
Includes
Photo-eye hood/bracket combo
Photo-eye hood
Photo-eye hood
Additional Features
Goes into power-save mode and minimizes power draw when the gate is closed
Compatible with SW420, SW470, SL575, SL585, SL595, HS670, HCT operators
Manufacturer
LiftMaster®
LiftMaster®
Bracket, interface box and Bracket and 2 ft. cable leads 2ft cable leads
Goes into power-save mode Built-in heater to keep free and minimizes power draw of frost and moisture in cold when he gate is closed or damp environments LiftMaster®
Albano
Features
•• Sensitized on three sides •• Requires mounting channel
Electric Edge
•• Sensitized on three sides •• Requires mounting channel
Mounting Channel
EMX
Electric Edge
Model
G65 ME111 10*
G65 ME110 C10*
G65 MGR20 5*
G65 MGS20 5*
List Price
$407.00
$44.00
$285.00
$285.00
Length
10 ft.
10 ft.
5 ft.
5 ft.
Description
2-wire electric edge for Barrier gates
Mounting channel for all ME111 edges
2-wire electric edge for gate with 2 in. Round post
2-wire electric edge for gate with 2 in. Square post
Not Applicable
•• Sensitized on three sides •• No mounting channel required
•• Sensitized on three sides •• No mounting channel required
•• Sensitized on three sides •• Requires mounting channel
Model
CPS-RN4
RETROAB
AOMRON
G50NIR
List Price
$441.00
$182.00
$275.00
$232.00
Power
24VAC
12VDC and 24 VAC/DC
24-240 VAC/DC
12 VAC/DC to 240VAC
Standby/ Detect Current
~20mA
20mA/40mA
35mA/125mA @ 24VAC 20mA/60mA @ 110VAC
20mA/40mA
Listing
UL listed to UL325 standards
UL listed to UL325 standards
UL listed to UL325 standards
Not Applicable
• Sensing edges require a means to connect it to the gate operator
Outdoor Rated
NEMA 4 - Polarized
NEMA 3, 4, 4X, 6P, 13
NEMA 3, 4, 12
IP66 watertight package
• The means must be able to extend and retract as the gate moves
Sensing Distance
30 ft.
30 ft.
40 ft.
30 ft.
Includes
Bracket, square reflector and 2 ft. cable leads
Photo-eye hood, bracket, 3 in. reflector and 6 ft. cable leads
Bracket and 3 in. reflector
Photo-eye hood, 3 in. reflector, reflector hood, brackets and 6 ft. cable leads
Manufacturer
LiftMaster®
Allen Bradley
Omron
EMX
Replacement Reflector Model
REFLECT UNIV
List Price
$13.00
Description
3 in. round universal reflector
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
Not Applicable
*Note: The last number in the model number represents the length of the Miller edge in feet. Specify length of edge when ordering. Lead time may apply for non-standard lengths, typically 2 weeks.
Not Applicable
Retro-Reflective Photo-Eyes
76
A sensing edge should be used on every gate for the protection of pedestrians and vehicles. Depending on the type of edge and the type of control wiring of the operator with which it is used, the function of the edge will vary. A standard 2-wire edge will cause a gate to reverse when it meets an obstruction while closing. It can also be wired to stop the gate.
Features
ACCESSORIES
ACCESSORIES
Thru-Beam Photo-Eyes
Sensing Edges
*Note: The last number in the model number represents the length of the Miller edge in feet. Specify length of edge when ordering. Lead time may apply for non-standard lengths, typically 2 weeks.
Edge Connections • Note: One edge connection is required for each sensing edge installed
Model
G50 104 1
G65 MWRT 01
List Price
$39.00
$200.00
Description
2-wire coil cord, 18-ga., 20 ft. extended length
Wireless sensing edge connection without audible alarm
77
GATE OPERATOR ACCESSORIES SAFETY
SAFETY
Emergency Devices
Audible/Visible Warning Devices
With the rapid growth of gated communities, secured commercial sites and residential gates, many municipalities across the nation have implemented special requirements for the access of emergency vehicles. Before installing any motorized gate operator system, be sure to check with the local fire department for their guidelines.
One or more of these devices may be connected to a gate operator with several possible modes of operation: while gate is moving, before gate closes, etc. • An auxiliary limit switch or auxiliary contact block may be required to allow for connection to the operator • Please call Technical Support at time of ordering to review installation requirements Warning: It is strongly recommended that audible/visible warning devices be included in every operator installation.
Model
SOSG8
STRBSW
C2EKIT*
C2EHEATER
List Price
$690.00
$798.00
$1,625.00
$165.00
Model
MG24823
MG24824
MG24825
REDSTROBE
Description
Siren Operated Sensor VIII
Tomar Strobeswitch
Click2Enter
Heater for Click2Enter
List Price
$517.00
$517.00
$517.00
$292.00
Power
9-30 VAC/DC
12-24VDC
12VDC
24VAC
Description
Amber strobe
Amber strobe
Amber strobe
Red strobe
Power
12VDC
115VAC
230VAC
24VAC
Current Draw
500mA
100mA
20mA
500mA
Outdoor Rated
NEMA 4X
NEMA 4X
NEMA 4X
IP23~NEMA 1
Gate Access
Via siren “Yelp” mode found on emergency vehicles
Via strobe emitters found on emergency vehicles
Via scanner radio technology found in radio transmitters used by emergency vehicles and personnel
Not Applicable
Includes
Not Applicable
12-24VDC power module
12VDC external power supply
Plug-in power supply
Variable activation range
Optional heater pad for operation in cold climates below -20°F
Features
•• Dual relay closures for use on dual gates •• Now even more selective about siren sounds
•• 600 ft. range •• Digital frequency discrimination prevents interference
*Requires programming by the installer.
Image Not Available
G50 200UH
G50 3026
List Price
$426.00
$323.00
Description
Amber strobe with siren
Siren
Power
110/120VAC
24 VAC/DC
Current Draw
~2A
90mA
Outdoor Rated
Weatherproof
NEMA 4
Siren Info
Single-tone siren: 87dBA (continuous)
Dual-tone siren: 90/85dBA (continuous or pulse)
ACCESSORIES
ACCESSORIES
Fire Access Boxes
Model
Warning Signs Model
ACP17
50SL1FAR
AFB120
List Price
$153.00
$238.00
$104.00
Description
Fire access box with cable release
Fire access box with cable release
All-in-one fire access box
Features
•• Pull the interior T-handle to release the gate chain •• Access doors on front and back •• Includes a hole for standard or fire department padlock**
•• Pull the interior T-handle to release the gate chain •• Includes a hole for standard or fire department padlock** •• Interior micro-switch •• Ideal with VSL595 operators
**Fire Department padlock and Knox® keyswitch not provided.
78
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
•• Hole for standard or fire department padlock** •• Interior micro-switch •• Knockout for Knox® keyswitch** •• Standard cylinder lock •• Ideal with pedestal model PED42ACC
Clearly display warning signs on both sides of the gate.
Model
G40 3505
AWSCSW
AWSSL
AWSHERCULES
List Price
$27.00
$27.00
$27.00
$27.00
Description
WARNING sign
WARNING sign, CSW200UL operators
WARNING sign, SL3000 operators
WARNING sign, HCT operators
Size, H x W
11 in. x 8.5 in.
11 in. x 8.5 in.
11 in. x 8.5 in.
12 in. x 9 in.
Warning Labels Model
G40 3501
G40 3504
G40 2701
List Price
$3.00
$3.00
$3.00
Description
CAUTION label - for servicing operator
SAFETY label - for cover of operator
CAUTION label - regarding moving parts
Size, H x W
3 in. x 5 in.
7 in. x 6 in.
1.5 in. x 5 in.
79
GATE OPERATOR ACCESSORIES LoopS
Loops
For exit, interrupt or shadow loop applications. Activates only when a vehicle passes over a loop. Requires a loop embedded in the ground to connect to the detector.
Reno Loop Detectors • 11-pin connector harness included, model A57
• 4 frequency settings
LiftMaster® Loop Detectors
• Dual relay
• 8 sensitivity levels
• 1 channel Model
A79
A24
A24LP
List Price
$280.00
$280.00
$234.00
Model
AELD
G714167NH
LD7LP
Power
115VAC
12-24VDC or 24VAC
24VDC
List Price
$189.00
$334.00
$234.00
DIP Switches
Internal
External
External
Power
24VDC
24VAC
10-30 VAC/DC
Connector
Plug-in – No wiring needed
Plug-in – No wiring needed
Terminal block
Failure
Failsafe
Failsafe
Failsafe
Relay
2
2
1
Channel
1
1
1
Frequency
4
4
Automatic
Sensitivity Levels
2 - Includes boost feature: increase sensitivity to detect high-profile vehicles
8 - Includes boost feature: increase sensitivity to detect high-profile vehicles
Automatic
Additional Features
Designed for and tested with CSW200, SL3000 and HCT operators
Designed for and tested with SL575, SL585, SL595, VSL595, HS670, BG770 and BG790 operators
•• <2mA current draw •• Low power accessory, Compact size •• Recommended for LA400, LA412, RSL and RSW operators
Failure
Failsafe
Failsafe
Both - Selectable
Current Draw
30mA
12VDC at 80mA, 24VDC at 50mA, 24VAC at 30mA
<5.5mA Low Power
Model
A57
List Price
$12.00
Description
11-pin connector harness, Reno detectors
Peek-Traffic Loop Detectors • 11-pin connector harness included
• 3 frequency settings
• Failure type: Failsafe
• 6 sensitivity levels
• Dual relay
• External DIP switches
LiftMaster® Loop Detectors for Outdoor Use • 1 or 2 detectors housed in a watertight and oiltight NEMA 4/12 enclosure
• Dual relay
• Prewired to terminal block for easy field connections
• 4 frequency settings
• On-board DIP switches
• 8 sensitivity levels - including boost feature that increases sensitivity to detect high-profile vehicles
• Connector is prewired to terminal block
Model
G50625S115
G50625S12
G50625S24
List Price
$350.00
$350.00
$350.00
Power
115VAC
12VDC
24VAC
Current Draw
57-68mA max.
57-68mA max.
57-68mA max.
ACCESSORIES
ACCESSORIES
• 1 channel
• 1 channel
Definition of Features Dual Relay: Can be used to operate an additional device such as security lights.
Failsafe: Upon detector failure, the gate will open. Fail Secure: Upon detector failure, the gate will remain closed.
• Selectable failure settings
Channel: Additional channels can be used for multiple loops.
Loop Wire
80
Model
G302416241
G3024161151
G302416242
G3024161152
List Price
$450.00
$458.00
$814.00
$814.00
Power
24VAC – 1 detector
120VAC – 1 detector
24VAC – 2 detectors
120VAC – 2 detectors
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
• Ideal for installers that prefer to make their own loops • 18 ga. 16/30 Tinned Stranded Copper - XLPE loop wire – UL Style 3173 – Temp. 125°C – 600 Volts – 1/32" insulated wall – on plastic spool Model
LW1000RED
LW1000BLU
LW1000BLK
LW500RED
LW500BLU
LW500BLK
List Price
$210.00
$210.00
$210.00
$129.00
$129.00
$129.00
Length
1,000 ft.
1,000 ft.
1,000 ft.
500 ft.
500 ft.
500 ft.
Color
Red
Blue
Black
Red
Blue
Black
81
GATE OPERATOR ACCESSORIES LOOPS
LoopS
Preformed Loop Wire
Sensing Probes
• No need to make loops with ready-to-install preformed loops
Typically used as a free exit device. As a vehicle approaches the probe, it will trigger the gate to open. Probe can be buried in the ground beside the driveway (not necessary to saw-cut the driveway).
• For use with vehicle loop detectors • Multiple sets can be used as interrupt loops, shadow loops, exit loops or entrance loops
Saw Cut Used in existing asphalt or concrete driveways.
CP3
GC836-12
GC836-24
GC836-110
List Price
$334.00
$315.00
$315.00
$315.00
Power
6-31VAC or 10-40VDC
12VAC/DC
24VDC
110VAC
Current Draw
150microA (standby)* 25-30mA (detect)
10mA-45mA
10mA-45mA
10mA-45mA
Model
G50XNL1218
G50XNL1818
PL48S50
PL612S50
List Price
$186.00
$244.00
$165.00
$212.00
Size
4' x 8'
6' x 12'
4' x 8'
6' x 12'
Sensitivity
Automatic
Adjust via dial, 3 levels
Adjust via dial, 3 levels
Adjust via dial, 3 levels
Lead Length**
100 ft.
50 ft.
50 ft.
50 ft.
Dual Relay ***
No
Yes
Yes
Yes
Design
1-piece
2-piece
2-piece
2-piece
Manufacturer
Cartell
EMX Industries
EMX Industries
EMX Industries
Lead Length*
50 ft.
50 ft.
50 ft.
50 ft.
Features
18-ga. XLP wire
18-ga. XLP wire
16-ga. XLPE in polyethylene jacket
16-ga. XLPE in polyethylene jacket
Manufacturer
National Loop
National Loop
BD Loops
BD Loops
* Longer lead lengths available as a special order. Please note length when ordering; an upcharge (list) will apply. Lead time is typically 1 to 2 weeks.
Pave-Over
* Low power accessory, ideal for solar or battery backup operators by minimizing current draw. ** Longer lead lengths available as a special order. Please note length when ordering; an upcharge (list) will apply. Lead time is typically 1 to 2 weeks. *** Dual Relay: Can be used to operate an additional device such as security lights.
Used under concrete, asphalt or gravel driveways, before driveway installation.
Model
G50ENL1218
G50ENL1818
PL48P40
PL612P40
List Price
$188.00
$229.00
$144.00
$202.00
Size
4' x 8'
6' x 12'
4' x 8'
6' x 12'
Lead Length*
50 ft.
50 ft.
40 ft.
40 ft.
Features
18-ga.TFFN wire in flexible PVC conduit
18-ga. TFFN wire in flexible PVC conduit
14-ga. solid UL493 direct burial wire
14-ga. solid UL493 direct burial wire
Manufacturer
National Loop
National Loop
BD Loops
BD Loops
ACCESSORIES
ACCESSORIES
Model
* Longer lead lengths available as a special order. Please note length when ordering; an upcharge (list) will apply. Lead time is typically 1 to 2 weeks.
Loop Sealant
Loop Sealant Gun
Features
Features
• Quart tube – nitrile rubber – fast drying – excellent adhesion to asphalt, concrete or cement
• Gun dispenser for quart tube loop sealant
• Skins over in 10 minutes and restores traffic in only 1 hr.
• 14:1 thrust ratio
• Ideal for any weather condition, -60°F to 350°F
• Built-in seal puncture, spout cutter and ladder hook
• Professional non-drip smooth rod revolving barrel
• Unaffected by chemicals: salts, oils, greases, transmission fluids, gasoline, rain or snow
82
Model
LSBLK
LSGRY
List Price per Tube
$33.00
$33.00
Color
Black
Gray
Model
LSGUN
List Price
$47.00
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
83
GATE OPERATOR ACCESSORIES HARDWARE
HARDWARE
LiftMaster® Elite Series™ Power Hinge®
LiftMaster® Elite Series™ Power Wheel® Solid Steel
Engineered to last longer, install easier and provide greater safety than conventional gate hinges. They are designed for industrial, high-traffic applications with heavy wrought-iron or aluminum gates.
• Continuous cycle operation and maintenance-free
• Double 5/8 in. ball bearings for smooth operation
• Solid cold-rolled steel
• 3/4 in. solid stainless steel shaft, grounded and tempered to Rockwell standards
• Silver zinc-plated wheels are heat-treated for longer life
• Continuous cycle operation, self-lubricating/no grease fittings • Offers a unique design so the gate never hits the post
Model
Power Hinge
Power Hinge 2
Power Hinge 3
List Price per Pair
$152.00
$152.00
$152.00
Weight Capacity
3,000 lbs. per pair
1,000 lbs. per pair
1,000 lbs. per pair
Material
Solid cold-rolled steel
½ Steel, ½ Aluminum
Heavy-duty aluminum
Features
For use on steel gates with steel mounting posts
For use on aluminum gates with steel mounting posts
For use on aluminum gates with aluminum mounting posts
• Designed for 1 in. or larger angle tracks
Model
AH107
AH111
AH110
AH113
List Price
$104.00
$191.00
$97.00
$182.00
Size
4 in.
4 in.
6 in.
6 in.
Quantity
Pair
Pair
Single
Single
Material
Gold zinc plating
Heat-treated silver zinc plating
Gold zinc plating
Heat-treated silver zinc plating
Weight Capacity
3,000 lbs.
3,000 lbs.
5,000 lbs.
5,000 lbs.
UHMW • Specifically designed for lighter sliding gates • Heavy-duty nylon, non-breakable • Designed for 1 in. or larger angle tracks
Model
SWG600
SWG606
List Price per Pair
$255.00
$268.00
Description
Heavy-duty bearing hinge set
For uphill swing, high usage or heavy gates
Weight Capacity
2,000 lbs. per pair
2,000 lbs. per pair
Material
Steel with high-grade steel needle bearings
Steel with bronze bearings
Features
•• Self-aligning bearing case, 1" solid bar attachment and Zerk fittings •• Compatible with 4"x4" post
•• ½" thick weldable steel plates and ¾" diameter steel hinge bolt •• Up to 15% lift
Model
AH102
List Price
$29.00
Size
4 in.
Material
Heavy-duty nylon, UHMW
Weight Capacity
750 lbs.
Quantity
Single
LiftMaster® Wheel Covers
ACCESSORIES
ACCESSORIES
Miscellaneous Gate Hinges
Wheel Mounting Brackets
Wheel covers guard against pinch-points to meet ASTM standards and ensure UL325 compliance. Wheel covers are manufactured exclusively for use with LiftMaster® Elite Series™ Power Wheel®.
V-Track Model
VTRACK*
VTRACKBLK*
TV 201
TM 202
List Price
$53.00
$59.00
$150.00
$47.00
Description
10 ft. V-track, unpainted
10 ft. V-track, black
10 ft. V-track, black
V-track mounting plate
Features
•• Manufactured from 12-ga. hot-dipped galvanized steel •• Single-piece design •• 90° rounded angle top •• 10 ft. length by 4 in. width •• Multiple 3/8 in. diameter anchoring holes for ease of installation
•• Manufactured from 12-ga. hot-dipped galvanized steel •• Single-piece design •• 90° rounded angle top •• 10 ft. length by 4 in. width •• Multiple 3/8 in. diameter anchoring holes for ease of installation
•• Steel construction •• 90° angle top •• Interlocking ends •• Powder coated finish •• 10 ft. length by 4 in. width •• Multiple 1/2 in. diameter anchoring hole
•• Used in asphalt driveways to install TV201 track instead of pouring a concrete pad •• Steel top plate welds to bottom of V-track •• 10 in. vertical tube •• Anchor on vertical tube
Model
CVRPWST4
CVRPWST6
CVRPWAL6
Model
AH103
AH1036
List Price
$70.00
$66.00
$66.00
List Price
$5.00
$8.00
Wheel Size
4 in.
6 in.
6 in.
Wheel Size
4 in.
6 in.
Quantity
Pair
Single
Single
Quantity
Single
Single
Material
Steel
Steel
Aluminum
Material
Steel
Steel
Color
Black
Black
Unpainted
Color
Unpainted
Unpainted
Note: Wheels Sold Separately.
* Prices subject to change. Please confirm pricing when ordering.
84
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
85
GATE OPERATOR ACCESSORIES HARDWARE
HARDWARE
Guide Rollers
Jamb-Track Assembly
• 5/8 in. Zinc-plated bolt and nut
• Great alternative for jobs where conventional swinging and sliding type gates would take up too much valuable space or simply would not work
• Silent operation • Steel roller bearings
• Allows an overhead gate or door to be lifted as close as 1 in. to the ceiling when fully open
• Steel-reinforced roller Model
GR121-R (B or G)*
GR121-S (B or G)*
GR122-R (B or G)*
GR122-S (B or G)*
List Price**
$41.00
$59.00
$45.00
$66.00
• Weldable attachments and bronze attachments
Description
3 in. roller
3 in. roller with bracket
6 in. roller
6 in. roller with bracket
• UHMW fully machined rollers for quiet operation
Material
Neoprene
Neoprene
Neoprene
Neoprene
• 450 lb. capacity
Assembly Contents • Right and left power arm assemblies • Right and left track GR123-R (B or G)*
GR125 (B or G)*
AUHM
List Price**
$53.00
$163.00
$29.00
Assembly Models
JTA175-7
JTA175-8
JTA175-9
Description
11 in. roller
6 in. adjustable roller
6 in. roller
List Price
$935.00
$1,038.00
$1,141.00
Material
Neoprene
Neoprene
UHMW
Gate Size
6-1/2' to 7-1/2' high
7-1/2' to 8-1/2' high
8-1/2' to 9-1/2' high
Color
Black or Gray
Black or Gray
Black
Features
Not Applicable
•• Fits gate frames 0 in. to 3 in. wide •• Easy vertical leveling of gate
Not Applicable
Replacement Hardware Contents • Right and left power arm assemblies • 2 Track rollers with brackets
*Specify Black or Gray when ordering.
• 2 Kicker rollers with brackets
**Quantity Discounts (Discount taken off list price.) Quantities of 10 to 19 for models above, Less.....................................................$7.00 Quantities of 20 to 39 for models above, Less.....................................................$9.00 Quantities of 40 or more for models above, Less................................................$10.00
JTH175-7
JTH175-8
JTH175-9
List Price
$861.00
$935.00
$1,068.00
Gate Size
6-1/2' to 7-1/2' high
7-1/2' to 8-1/2' high
8-1/2' to 9-1/2' high
• Right and left track
• Guard against pinch-points to meet ASTM standards and ensure UL325 compliance • Commercial-grade black EPDM rubber rollers • Powder coated black steel housing Model
CVRGRST6
CVRDGRST6
List Price
$97.00
$162.00
Description
6 in. covered roller
6 in. covered double roller - Adjustable
Features
Not Applicable
Adjustable for 2 ft. to 3 ft. gate frame
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
Hardware Models
Replacement Track Contents
LiftMaster® Covered Guide Rollers
86
• 2 Kicker rollers with brackets
Model
ACCESSORIES
ACCESSORIES
• 2 Track rollers with brackets
Track Models
JTR-7
JTR-8
List Price
$279.00
$295.00
Gate Size
6-1/2' to 7-1/2' high
7-1/2' to 9-1/2' high
87
GATE OPERATOR ACCESSORIES HARDWARE
TimerS
Miscellaneous
7-Day Timers Used to automatically open and close overhead doors, gates and parking barriers at pre-programmed times.
Model
ES 130
VW 204
List Price
$152.00
$358.00
Description
End sprocket assembly with chain guard
Dual 6 in. steel V-groove wheel trolley
Features
•• 2,000 lb. capacity •• Fully machined face •• Grease Zerk fittings •• 1/2 in. zinc-plated bolt and nut •• Relief groove self-cleans •• Partial flat area •• Rocks smoothly over bumps •• 1/4 in. thick pivot bars
•• For rear-mount installation of sliding gates •• 3/16 in. steel back plate with 1 in. diameter shaft •• #41 sprocket standard •• Steel chain guard •• Oil-impregnated bronze roller brushing •• Adjustable positioning of sprocket along shaft •• Black powder coated finish
Model
GC 839-S12
GC 839-S24
G26DGI16
GC 839-S110
ATIMERUL103
List Price
$216.00
$216.00
$180.00
$180.00
$175.00
Power
12VDC
24VAC/DC
24VAC/DC
110VAC
110VAC
Program*
50
50
20
20
6
Current Draw
33mA
80mA @ 24VAC, 40mA @ 24VDC
80mA @ 24VAC, 40mA @ 24VDC
30mA
75mA
Features
Model
APSA
APRS
ASRI
List Price
$59.00
$41.00
$55.00
Description
Aluminum positive stop
Proximity reed switch
Rubber safety bumper, 5 ft.
Features
•• For swing gates •• Includes two rubber grommets
•• Operating gap: 2 in. •• Contact type: N/O •• Can be used to activate additional devices such as an alarm
Model
G193025
1941240D
1941240DNP
1940240D
MS202
MS202 SS
List Price
See Parts Price Book
$27.00
$75.00
$51.00
See Parts Price Book
See Parts Price Book
Description
#50 Chain
#41 Chain
#41 Chain
#40 Chain
#41 Chain
#41 Chain
•• Black oxide •• 10 ft. pack
•• Nickel-plated •• 10 ft. pack
•• Stainless steel •• 10 ft. pack
Mega Slide operators
Mega Slide operators
Operator Compatibility
88
•• Nickel-plated •• 25 ft. pack
•• Black oxide •• 10 ft. pack
SL575, SL585, SL595, VSL595 RSL, SL3000, HCT, SL930
•• Nickel-plated •• 10 ft. pack SL3000
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
SL3000
Intermatic
Intermatic
•• Daylight savings •• Battery backup Intermatic
•• Daylight savings •• Battery backup
•• Battery backup
Intermatic
EMX
*A program is required for each on-event and off-event. Example: The gate operator is programmed to open each Monday at 6 a.m. and close at 10 a.m. = Two programming events.
Miscellaneous Timers
•• For use on slide gates
Bulk Pack Chain
Features
•• Daylight savings •• Battery backup
Model
GC 901
GC 804-24
GC 804-12
List Price
$190.00
$231.00
$231.00
Description
Light delay timer
Adjustable timer
Adjustable timer
Power
12VDC
24VAC/DC
12VDC
Features
•• Allows connection of a light to the gate operator •• Will illuminate for 60 seconds, then shut off
•• Adjustable up to 600 hrs. •• Will close gate automatically •• DPDT contacts •• Includes terminal base
ACCESSORIES
ACCESSORIES
Manufacturer
•• Daylight savings •• Battery backup
•• Adjustable up to 600 hrs. •• Will close gate automatically •• DPDT contacts •• Includes terminal base
89
GATE OPERATOR ACCESSORIES LOCKS
Locks
Magnetic Locks
Solenoid Locks
Model
LiftMaster® MG1300
LiftMaster® EMLO 1300F*
LiftMaster® EMLO 1300S*
GC838*
Model
GC824-12*
LiftMaster® SGLOCK12V
GC824
List Price
$465.00
$393.00
$393.00
$687.00
List Price
$555.00
$317.00
$730.00
Power Current Draw Holding Force
Includes
Features
12 or 24 VDC
12 or 24 VDC
12 or 24 VDC
12-24 VDC
12VDC at 500mA, 24VDC at 250mA 12VDC at 500mA, 24VDC at 250mA 12VDC at 500mA, 24VDC at 250mA 12VDC at 460mA, 24VDC at 220mA 1,300 lbs.
1,300 lbs.
•• 12VDC transformer •• Pivoting steel armature •• Mounting plate •• Hardware
Mounting plate & hardware
•• Junction box with knockouts •• Pivoting armature •• Face mount
1,300 lbs.
Mounting plate & hardware
Face mount
Surface mount
LiftMaster®
Power
12-24 VAC/DC
Compatible only with LA412, RSL and RSW operators
115V
Current Draw
12VAC/DC at 230mA 24VAC/DC at 475mA
Low power**
Unrated
Holding Force
2,000 lbs.
3,500 lbs.
Unrated
Features
Fail secure
1,200 lbs.
Mounting plate & hardware
Face mount
•• Fail secure •• Keyed manual override release for emergencies
•• Fail secure •• Emergency release pin
* Requires separate power supply, 12VDC Transformer model ARMP5 available. ** Low power accessory when used with operators with the EverCharge® Power Management System.
* Requires separate power supply, 12VDC Transformer model ARMP5 available.
Pin Lock
Surface Mount
Face Mount *Mounting brackets shown are not included
Maglock Module Package Model
MG1300RLY PKG
List Price
$525.00
Includes Features
•• MG1300 magnetic lock
• Q400MAU relay module
Package savings
Model
LiftMaster® GPINLCK
List Price
$39.00
Power
Not Applicable
Current Draw
Not Applicable
Mounting
Locks gate arm to the gate’s mounting bracket
Features
Compatible with LA100, LA400 & LA412 operators
Relay Modules This easy-to-integrate module in combination with the control board will facilitate the control and operation of external accessories such as solenoid locks or magnetic locks. Please refer to “Operator Compatibility” below.
Model
Q400MAU
OMNIEXB
Q240MAU
912B
List Price
$79.00
$82.00
$63.00
See Parts Price Book
Operator Compatibility
SL3000UL, CSW200UL, HCT, RSL and RSW
SL3000UL, CSW200UL and HCT
Miracle-One™
Mega operators
Capable of switching loads up to 2 Amps
•• Capable of switching loads up to 1 Amp •• Provides the option to add a push-button station or connection to an alarm system
Features
90
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
ACCESSORIES
ACCESSORIES
Installation Examples
Capable of switching loads up to 2 Amps
•• For magnetic locks only •• 7 Amp contacts
91
GATE OPERATOR ACCESSORIES Barrier Arms for Mega Arm Operators
Barrier Arms for Mega Arm Operators
Aluminum, 12 ft.
Aluminum, 17 ft.*
Model
MA023
MA024
MA024R
MA024R DOT
Model
MA115
MA116
MA116R
MA116R DOT
List Price
$189.00
$214.00
$249.00
$249.00
List Price
$237.00
$262.00
$296.00
$296.00
Description
White aluminum arm
White aluminum arm with yellow-black stripes
White aluminum arm with reflective yellow-black stripes
White aluminum arm with red/white retroreflectorized DOT tape
Description
White aluminum arm
White aluminum arm with yellow-black stripes
Size
12' long x 3" round
12' long x 3" round
12' long x 3" round
12' long x 3" round
Size
17' long x 3" round
17' long x 3" round
17' long x 3" round
17' long x 3" round
Arm Opening Area**
14' (end of cabinet to arm tip)
14' (end of cabinet to arm tip)
14' (end of cabinet to arm tip)
14' (end of cabinet to arm tip)
Arm Opening Area**
10' 9.75" (end of cabinet to arm tip)
10' 9.75" (end of cabinet to arm tip)
10' 9.75" (end of cabinet to arm tip)
10' 9.75" (end of cabinet to arm tip)
Notes
Requires counterweight model MA117
Requires counterweight model MA117
Requires counterweight model MA117
Requires counterweight model MA117
White aluminum arm with reflective White aluminum arm with yellow-black stripes red/white retroreflectorized DOT tape
* 15 ft. gate arm requires 22" of rear clearance for upswing of counter arm extension.
Articulating Arm Model
MA034*
MA035*
MA024-10*
MA033
List Price
$580.00
$161.00
$214.00
$419.00
Description
PVC articulating arm with yellowblack stripes and hardware kit
Replacement PVC arm with yellowblack stripes
White aluminum articulating arm with yellow-black stripes
Hardware kit for articulating arm
Adapter collars for padded barrier arms
Size
9' long x 2.5" square
9' long x 2.5" square
10' long x 3" round
Not Applicable
11' long x 2" round
Not Applicable
Notes
Not Applicable
Replacement for model MA034
Hardware kit not included, see model MA033
For model MA034 and MA024-10 barrier arms
Not Applicable
9' 9.75" (end of cabinet to arm tip)
Not Applicable
Replacement for model MA025
Replacement for model MA025
Set of 2
Model
MA025
MA026
MA027
MA031
List Price
$214.00
$133.00
$117.00
$14.20
Description
White aluminum arm with yellow padding
Replacement yellow foam padding
Replacement white aluminum arm
Size
12' long x 4" round
12' long x 4" round (2" ID)
Arm Opening Area**
Not Applicable
Notes
Requires adapter collars model MA031
*Arm shipped as single piece. Installer cuts down to meet site requirements.
Aluminum, 14 ft. with Padding
Model
MA117
MA900
MA021
MA021A
G50FL12024
List Price
$81.00
$104.00
See Parts Price Book
See Parts Price Book
$132.00
Description
Counterweight required for all 15' barrier arms
Yellow/Black tape roll
Replacement 5/16" nylon arm nuts
Replacement 5/16" nylon arm nuts
24VAC/DC flexible rope light - red
Features
Not Applicable
2" wide x 36 yards
•• Regular •• Package of 50
•• Thin •• Package of 50
10 ft. length
Model
MA028
MA029
MA030
MA031
List Price
$237.00
$156.00
$136.00
$14.20
Description
White aluminum arm with yellow padding
Replacement yellow foam padding
Replacement white aluminum arm
Adapter collars for padded barrier arms
Model
SP8
SP8PAD
SP8TUBE
MA031
Size
14' long x 4" round
16' long x 4" round (2" ID)
13' long x 2" round
Not Applicable
List Price
$209.00
$97.00
$117.00
$14.20
Arm Opening Area**
Not Applicable
Not Applicable
11' 9.75" (end of cabinet to arm tip)
Not Applicable
Description
White aluminum arm with yellow padding
Replacement yellow foam padding
Replacement white aluminum arm
Adapter collars for padded barrier arms
Notes
Requires adapter collars model MA031
Replacement for model MA028
Replacement for model MA028
Set of 2
Size
8' long x 4" round
8' long x 4" round (2" ID)
8' long x 2" round
Not Applicable
Arm Opening Area**
Not Applicable
Not Applicable
6' 9.75" (end of cabinet to arm tip)
Not Applicable
Notes
Requires adapter collars model MA031
Replacement for model SP8
Replacement for model SP8
Set of 2
**Arm opening area may vary dependant upon barrier operator arm length and distance from curb. See specific notes for each arm.
92
Barrier Arm Accessories
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
ACCESSORIES
ACCESSORIES
Aluminum, 12 ft. with Padding
Barrier Arms for Mega Arm Sprint Operators For use with Mega Arm Sprint/Tower operators only
**Arm opening area may vary dependant upon barrier operator arm length and distance from curb. See specific notes for each arm.
93
GATE OPERATOR ACCESSORIES Barrier Arms for BG Operators
heaters
Single-Piece Arms, BG 770
Self-Regulating Heater, Coil* • Keeps operator gearbox and batteries at suitable temperature when outside temperature is below 0°F for extended periods of time
Model
G65 1209 P
G65 1209
15 ALUM ARM
List Price
$181.00
$230.00
$366.00
Model
G65 18SL
G65 18CSW
HTRKITRSL**
HTRKITRSW
Description
PVC arm with yellow-black stripes
Wood arm with white-black stripes
White aluminum arm with yellow-black stripes
List Price
$334.00
$334.00
$345.00
$345.00
Size
10' long x 2.5" square
12' long x 0.75" wide x 5.5" – 4" high (height tapers down)
15' long x 2.5" square
Power
120V
120V
120V
120V
Operator Compatibility
SL3000UL
CSW200UL
RSL12V
RSW12V
Notes
Requires clamp, see model G10 8019
Not Applicable
Arm adapter included
• Installs into the frame of the operator
* For factory installed units, please use suffix (Sample: SL3000UL H3 and RSL12VH). **Heater cannot be used in combination with a 33Ah battery, model A12330SGLPK.
Thermostat Control Heater, Fin Type • Designed to automatically maintain a suitable temperature inside a control enclosure down to -40°F
Articulating Arms, BG 770
• Uses a high surface area aluminum heat emitter to eliminate the need for a fan
Articulating arms are available by special order, 4-week lead time minimum. Model
G65 1210 P*
G65 1210
G65 1210 K
List Price
$512.00
$555.00
$270.00
Description
PVC articulating arm with yellow-black stripes Wood articulating arm with white-black stripes and hardware kit and hardware kit
Size Notes
Hardware kit for wood articulating arm
12' long x 0.75" wide x 5.5" – 4" high (height tapers down)
10' long x 2.5" square Requires clamp, see model G10 8019
Manufactured to meet customer specifications
• Adjustable from 30° to 120°F (0° to 50°C)
Not Applicable For model G65 1210 barrier arm
*Arm shipped as single piece. Installer cuts down to meet site requirements.
65 32449*
65 32448*
G65 18300
G65 19084
$334.00
$352.00
$334.00
$387.00
Power
115V & 575V
208V - 460V
115V & 575V
208V - 460V
Operator Compatibility
SL575, SL585, SL595
SL575, SL585, SL595
SW470, SW490, BG770, BG790
SW470, SW490, BG770, BG790
*Recommended for factory installation. For factory installed units, please use suffix H3 (Sample: SL575 5011 H3).
Barrier Arm Accessories for BG Operators Model
G651208R
MA900
G408700
G10 8019
G50FL12024
List Price
$440.00
$104.00
$50.00
$91.00
$132.00
Description
Replacement wood wishbone arm for BG790 (white-black stripes)
Yellow-black tape roll
White-black tape roll
PVC arm mounting clamp
24VAC/DC flexible rope, light - red
Features
•• 24' long x 0.75" wide x 5.5" – 4" high (height tapers down) •• No counterweight included, model G658056 sold separately
2" wide x 36 yards
3" wide x 36 yards
Not Applicable
10 ft. length, includes clips
Not Applicable
Not Applicable
Barrier Arms Used With
Model List Price
ACCESSORIES
ACCESSORIES
• Provides low-radiation and high-convection heating to the enclosure
Thermostat Control Heater, Plate
Thermostat Control Heater, Strip
• Maintains a suitable temperature inside a control enclosure
• Flexible; can wrap around gearboxes and motors; plugs into 115V outlet
• For temperatures below 32°F
• Will automatically turn on below 30°F • Delivers 60 watts of heat
Model List Price Watt Rating
Not Applicable
G65 1209P and G65 1210P
All barrier operators
Operator Compatibility
MA201*** $162.00 150 Watt
UN201***
Model
GC 902
$195.00
List Price
$279.00
500 Watt
Power
115V
Operator Compatibility
SL930
MSLX, MAT, MSL, MA, MAS MSW, MAST
***Available for 115VAC operators only.
94
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
95
GATE OPERATOR ACCESSORIES FIELD Kits and MODULES
FIELD Kits and MODULES
Image Not Available
Model
Q160
AWB
List Price
$16.00
$145.00
Description
Long Gate Kit
Weight Balance
Features
Operator Compatibility
•• Adjusts gate travel up to 51 ft. •• Call technical support for application information
Image Not Available
Image Not Available
Q103
SAMSKIT
Model
See Parts Price Book
$38.00
List Price
See Parts Price Book
$44.00
Uphill Swivel Arm
Sequenced Access Management
Description
Single channel radio modification
Timer defeat - hold open switch
Features
Allows for the addition of a 312HM or 412HM receiver
Allows the automatic close timer on the operator to be manually disabled
Operator Compatibility
BG770 and BG790
BG770 and BG790
•• For long and/or heavy gates that may jerk when closing or reversing direction •• Allows the motor to coast the gate further at stops for smoother gate operation
Not Applicable
CSW200UL
CSW200UL and RSW12V
SL3000UL
•• Includes required relay and limits •• Sequenced access between any Mega Arm operator and any gate listed below SL3000UL, CSW200UL, Mega Series operators
G90PGR
G50 402
Omni Option Board Module Expand your gate operator system by providing the option to add: • A 3-button control station (i.e. model G02403)
Image Not Available
Model
MA200
MA230VKIT
50-19503
MSWIRE12GA6C
List Price
$38.00
$10.00
$47.00
$137.00
Description
K1 relay output option
Voltage conversion kit
Push to open bracket
Dual gate wiring kit
Convert from 115VAC to 230VAC operation
Allows the gate to swing away from the property
Includes 40 ft. of cable
Mega operators
LA400, LA412
RSL12V and RSW12V
Features Operator Compatibility
•• Accessory relay for external signaling •• Common, N/C and N/O contacts Mega operators
Image Not Available
Image Not Available
Image Not Available
Model
G653509
SL585LIMIT
9078002KT
List Price
$67.00
$68.00
$50.00
Description
Diagonal support brace
Long gate kit
Auxiliary contact block
•• Adds structural support to operator stand •• 4 braces included Features
Operator Compatibility
•• Adjusts gate travel up to 70 ft. •• Call technical support for application information
SL585
•• Includes wired terminal block •• Drives auxiliary device in one direction (open or close cycle) •• For both directions, (2) required
SL585
SL575, SL585, SL595
• External accessories such as a solenoid lock or magnetic lock (capable of switching loads up to 1 Amp) • Connection to a burglar system (alarm input and output included) Model
OMNIEXB
Price
$82.00
Operator Compatibility
SL3000UL, CSW200UL, HCT
Quick-Close Circuit Module This module allows a gate to close immediately after a car leaves the interrupt loop. This feature does not look for a close command from the timer-to-close or an auxiliary device.
ACCESSORIES
ACCESSORIES
Image Not Available
• QCC Switch Mode A: --If the gate is closing while a car is over the interrupt loop, the gate will stop and then open --As soon as the car leaves the interrupt loop, the gate will resume closing • QCC Switch Mode B: --If the gate is closing while a car is over the interrupt loop, the gate will only stop --As soon as the car leaves the interrupt loop, the gate will resume closing Model
QCCOMNI
Price
$39.00
Operator Compatibility*
SL3000UL
* Requires Omni Option Board, model OMNIEXB
Image Not Available
Relay Module This easy-to-integrate module in combination with the control board will facilitate the control and operation of external accessories such as solenoid locks or magnetic locks. The relay (form C 2A 125 volts AC/DC) is capable of switching loads up to 2 Amps.
Model
GHCPCK1
71-REDGRN-HCT
K71-50787
50-SW4QRR
List Price
$100.00
$263.00
See Parts Price Book
$493.00
Description
HCT EZ value package
Red/Green warning light box
Extended travel kit
Quick-release arm cap kit
Model
Q400MAU
Q240MAU
•• Includes fine-thread limit shaft and two limit nuts •• Call technical support for application information
List Price
$79.00
$63.00
Signals if door is moving or stationary
Not Applicable
Operator Compatibility
SL3000UL, CSW200UL, HCT, RSL12V, RSW12V
Miracle-One™
HCT
HCT
SW490
Features Operator Compatibility
96
Image Not Available
•• OMNIEXB module •• 02-103 3-button station
HCT
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
97
GATE OPERATOR ACCESSORIES Mounting Accessories
POWER
For Operators
Solar Panels
Model
SOLPNL10W12V
SOLPNL20W12V
Model
MPEL
MSEL
MSLM
List Price
$350.00
$468.00
List Price
$119.00
$292.00
$292.00
Description
10-Watt 12V solar panel
20-Watt 12V solar panel
Description
Mounting plate for post mounting
Steel stand for mounting to concrete pad
Steel stand for mounting to concrete pad or post mounting
Includes
Features Operator Compatibility
Multiple post mounting options: 1) 3 in. round on the outside 2) 3 in. round on the inside 3) 4 in. square welded on the inside
•• Removable top plate for post mounting (square post welded on the inside) •• Stand height, 9 in.
Stand height, 7.5 in. Plate, 17.5" x 16.5"
CSW200UL, SL3000UL, RSW12V
SL3000UL
RSL12V
Operator Compatibility
LA412, RSL12V, RSW12V
Model
7AHSLR PKG
33AHSLR PKG**
List Price
$506.00
$679.00
Description
7Ah solar package for RSL/RSW operators
33Ah solar package for RSL/RSW operators
Solar Packages
ACCESSORIES
G 65RSW P
G 65RSW D
G305 803002
List Price
$232.00
$210.00
$76.00
$22.00
Description
Post for in-ground mounting, pedestal
Post for in-ground mounting, pedestal
Two brackets for pad mounting
For post mounting a gate operator
Zinc-coated steel
4 U-bolts and hardware for 3 in. pipe
SW420
SW420, SW470, SL575, SL585, SL595
Features Operator Compatibility
•• 4 in. square steel •• Length, 36 in.
•• 4 in. square steel •• Length, 40 in.
SL930
SW420
Solar Accessories
Power Backup • Keeps traffic moving during a power outage • Opens the gate when power goes out to allow vehicles to enter or exit • When power is restored the gate will return to normal operation
Model
BIGBTYKT**
Model
DC2000SL
DC2000CSW
List Price
$127.00
List Price
$753.00
$753.00
Description
Big battery kit, weather-resistant battery box with cables Operator Compatibility
SL3000UL
CSW2000UL
•• Provides extended power reserve •• Accommodates 80Ah 12V battery •• Battery sold separately
**Recommended for areas that reach below 32°F/0°C for extended periods of time.
• Post mounting kit for LA400 or LA412 standard or XL metal control boxes • Kit includes: 2 U-bolts and hardware
98
•• SOLPNL20W12V solar panel •• A12330SGLPK battery with harness •• 373LM remote (2 pcs) •• Can not be used with heater option
**Recommended for areas that reach below 32°F/0°C for extended periods of time.
Features
For Control Boxes
•• SOLPNL20W12V solar panel •• MBAT battery •• BTYHARN7AH battery harness •• 373LM remote (2 pcs)
ACCESSORIES
MS2300
•• Mounting bracket and hardware •• 10 ft. of cable
LA412, RSL12V, RSW12V
Includes
Model
•• Mounting bracket and hardware •• 10 ft. of cable
Model
50-19509
50-19511
50-19512
List Price
$29.00
$29.00
$29.00
Size
For 6 in. round post
For 4 in. round post
For 2.5 in. round post
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
Batteries
Image Not Available
Model
MBAT
A12330SGLPK
BTYHARN7AH
List Price
$31.00
$211.00
$7.00
Description
7Ah 12VDC battery only, single
33Ah 12VDC battery, single with harness
7Ah battery harness
Operator Compatibility
LA400, LA412, Miracle-One, Mega’s, SL930, RSW12V, RSL12V
LA412, RSL12V, RSW12V
RSL12V and RSW12V
99
GATE OPERATOR ACCESSORIES POWER
POWER
Surge Suppressors
Installation Wire
Lightning damage from direct hits or nearby strikes can potentially leave sites unsecured or inaccessible. Downtime and repair costs can be prevented or reduced with the use of surge suppression. LiftMaster® gate operators feature built-in surge suppression. But not all devices used on installations have this feature.
Model
SURGE120V
SURGE240V
SURGELV
List Price
$80.00
$80.00
$75.00
Power
120VAC
240VAC
30V
Description
•• Hard wired •• High voltage •• Single phase •• Diagnostics LED
•• Hard wired •• High voltage •• Single phase •• Diagnostics LED
•• Screw terminal •• Low voltage •• 2 pair wire •• Voice/Data/Power
Power Supply
Model
EW 90
G65 7WIREL
EW 91
40BW*
List Price
$2.50 per foot
$169.00
$117.00
$1,124.00
Gauge
16 gauge, 600V
20 gauge
14 gauge, 600V
16 gauge and 20 gauge, 300V
•• 2 stranded copper conductors •• Insulated and jacketed
ACCESSORIES
APOW3*
Price
$27.00
$39.00
Input
120VAC/60Hz
120VAC/60Hz
Output
12VDC
34VDC
Power
12VA
40VA
Current
1A
1.17A
Compatibility
12VDC devices that have a current draw up to 1 Amp. Example: MG1300
Miracle-One™
5 conductors: • 4x - 16-ga. stranded copper • 1x - two twisted 20-ga. • Insulated, jacketed and shielded
Spool Size
Not Applicable
500 ft.
500 ft.
1,000 ft.
Compliance
Complies with UL E-64956
UL listed E-120910, (C)UL, CSA certified
RoHs compliant, UL listed, CSA certified
UL 2464
•• Direct burial •• Used to run low-voltage power to battery-operated gate operators
Not for direct burial
Loop detector wire
•• For wiring operator arm to the control board •• Operator compatibility: Miracle-One™
*Available by the foot; please use model K94-50838. For pricing see Gate Parts Price Book.
ACCESSORIES
ARMP5
•• 1 solid copper conductor •• Insulated and jacketed
Conductor Description
Additional Features Model
•• 7 solid copper conductors •• Insulated and jacketed
*Complies with the state of California energy consumption regulation; includes a resettable circuit.Power Supply
Gate Power Accessory Kit
Model
GPAK
List Price
$58.00
Description
100
•• Alternative power supply connector for use with LiftMaster WKP5LM3, WKP250LM3, WPB1LM3, WPB3LM3 wireless access control devices •• Allows the installer to replace the batteries with any 12-24 VAC or VDC power source
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
101
GATE OPERATOR ACCESSORIES ACCESS CONTROL
ACCESS CONTROL
Standard Pedestals • Faceplate with universal hole pattern to fit almost any access device • Black power coated finish, ensuring no chipping or fading • 2 x 2 Square post • Each neck is bent with a 6 in. center radius, giving a tight professional look • Mounting hardware included for all pad mount models
Universal Faceplate Model
PED42
PED42ACC
PED64
PED4272
PED72
List Price
$184.00
$128.00
$184.00
$467.00
$393.00
Height
42 in.
42 in.
64 in.
42 in. & 72 in.
72 in.
Mounting Style
Pad
Pad
In-Ground
Pad
Pad
Material Gauge
11 ga. steel
14 ga. steel
11 ga. steel
11 ga. steel
11 ga. steel
Four-Corner Faceplate Model
GC813
SNAPEDG
List Price
$255.00
$237.00
Height
68 in.
44 in.
Mount Style
In-Ground
Pad
Faceplate Type
None: threaded pipe
Four-corner hole
Post Size
3"x3" square with 1.5" pipe
2" x 2"
Color
Black
Gray
Material Gauge
11 ga. steel
11 ga. steel
Wireless Single Push-Button Control
• Combines the simplicity of wireless installation with the robust feature sets of higher-priced keypad controllers • One-time code: Single use codes for visitors • Wireless control of up to 4 gates • Lockout mode: Locks system indefinitely for added security • Up to 500 ft. range • Keypad lighted when motion is detected
• Wireless control of 1 gate • Up to 500 ft. range • Functions in the same manner as a remote control
Model
WKP5LM3
WKP250LM3
List Price*
$161.00
$250.00
Description
5 Code
250 Code
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
WPB1LM3
List Price*
$161.00
*See access control pricing, gate multiplier not applicable.
*See access control pricing, gate multiplier not applicable.
STAR™ 450 Access Control Receiver • Easy to program - Rapid Learn® feature programs multiple remote controls in just seconds • Compact design fits inside most gate operators • Universal receiver with antenna • User-friendly programming technology makes it easy to add, block and delete up to 450 remote controls • Ideal for gated communities, parking lots and garages • Compatible with LiftMaster® Security+®, Passport™, billion code (390MHz only) and digital remote controls Model
STAR450-315
STAR450-390
STAR450 PKG100
STAR450 PKG200
71-65WT
List Price*
$81.85
$81.85
$100 Net Discount
$200 Net Discount
$24.50
Features
315MHz
390MHz
(1) STAR450-315, (100) 371LM
(1) STAR450, (200) 371LM
Optional weatherproof case
*See radio control pricing, gate multiplier not applicable.
Remote Antenna Mounting Kit Compatible with 312HM, 412HMm, 422LM and 423LM receivers Model
86LM
86LMT
List Price
$15.15*
$21.20*
Features
Contains antenna bracket and 15' of cable
Contains antenna bracket and 25' of cable
*See radio control pricing, gate multiplier not applicable.
Gate Power Accessory Kit Model
GPAK
List Price
$58.00
Description
102
Model
ACCESSORIES
ACCESSORIES
Miscellaneous Pedestals
Wireless Access Control Keypad
•• Alternative power supply connector for use with LiftMaster WKP5LM3, WKP250LM3, WPB1LM3, WPB3LM3 wireless access control devices •• Allows the installer to replace the batteries with any 12-24 VAC or VDC power source
103
GATE OPERATOR ACCESSORIES ACCESS CONTROL
ACCESS CONTROL
TriCode® Remote Controls
Digital Remote Controls
• Compatible with MultiCode™, Delta and Stanley code formats**
• Easy code selection, 9-position trinary DIP switches with 19,683 changeable codes per channel
• Dual frequency remote control rated at 300MHz and 310MHz
• Red LED indicates battery strength and signals sent transmissions
• Single red LED indicates transmission
• 315MHz
• 9V battery included
• 12V battery and visor clip included
• 1-year warranty
• 48 units per master pack
®
®
• 48 units per master pack TC1
TC2
TC4
Model
361LM
362LM
363LM
$13.65
$21.90
$25.20
1-47 Units, End Column*
$10.00
$13.50
$13.50
$11.45
$17.25
$20.80
48+ Units, End Column*
$8.00
$11.50
$11.50
Single-channel remote
Two-channel remote
Four-channel remote
Description
Single-button Remote
Two-button remote
Three-button remote
Model 1-47 Units, End Column* 48+ Units, End Column* Description
•• 1 x 10 pole DIP •• 3-position slide switch •• 1 SPST momentary
Features
•• 2 x 10 pole DIP •• 2 x 3 position slide switch •• 2 SPST momentary
•• 2 x 10 pole DIP •• 2 x 3 position slide switch •• 4 SPST momentary
*See radio control pricing, gate multiplier not applicable.
*See radio control pricing, gate multiplier not applicable.
Single-Button Remote Control • Compatible with Multi-Code™ code format**
®
TriCode Receivers
• 300MHz frequency • Not LiftMaster® compatible
• Compatible with MultiCode™, Delta and Stanley code formats** ®
• Dual frequency remote control rated at 300MHz and 310MHz • 3-year warranty • 48 units per master pack Model
TCr1
TCr2
TCg1
TCg2
1-47 Units, End Column* 48+ Units, End Column*
$23.00
$36.75
$30.95
$39.20
$18.60
$29.90
$26.30
$32.35
Description
Single-channel universal receiver
Two-channel universal receiver
Single-channel commercial receiver
Two-channel commercial receiver
Features
•• 1 x 10 pole DIP •• 3-position slide switch •• NEMA 1 rating •• 3-position direct-connect tabs •• 1 NO relay rated at 24VAC/DC at 10A
•• 2 x 10 pole DIP •• 3-position slide switch •• NEMA 1 rating •• 6 wired leads (9 in.) •• 2 NO relays rated at 24VAC/DC at 10A
•• 2 x 10 pole DIP •• 3-position slide switch •• Weather-resistant housing •• 4 wired leads (3 ft.) •• 2 NO relays rated at 24VAC/DC at 10A
Model
300MC
1-47 Units, End Column*
$9.00
48+ Units, End Column*
$7.00
Description
Single-button remote
ACCESSORIES
ACCESSORIES
®
*See radio control pricing, gate multiplier not applicable. **MultiCode™ is a trademark of the Linear Corporation.
•• 2 x 10 pole DIP •• 3-position slide switch •• Weather-resistant housing •• 6 wired leads (3 ft.) •• 2 NO relays rated at 24VAC/DC at 10A
*See radio control pricing, gate multiplier not applicable. **MultiCode™ and Delta® are trademarks of the Linear Corporation. Stanley® is a registered trademark of the Stanley Corporation.
104
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
105
GATE OPERATOR ACCESSORIES ACCESS CONTROL
ACCESS CONTROL
Three-Button Control Stations
Two-Position Key Controls with Stop Button
• Open/Close/Stop allows complete control of gate
• Open/Close, spring return to center (Off), key removable in center position only • Allows complete control of gate
• May be used on all gate operators
• May be used on all operators
Model
G02 103
G02 108
G02 403 and G02 403P
Model
G02 110
G02 410
G02 405
List Price
$28.00
$70.00
$110.00
List Price
$111.00
$162.00
$112.00
Description
3-button station
3-button station
3-button station
Description
Two-position key control with stop button
Two-position key control with stop button
Two-position key control with stop button
NEMA Rating
NEMA 1
NEMA 1
NEMA 4X/12/13
NEMA Rating
Indoor, NEMA 1
Outdoor, NEMA 4/12
Outdoor, NEMA 4/12
Mount Style
Surface
Flush
Surface
Mount Style
Flush
Surface
Surface
•• Die-cast metal enclosure •• Tamperproof*
•• Die-cast metal enclosure •• Non-tamperproof
Features
•• Open/Close/Stop •• Steel enclosure
•• Open/Close/Stop •• Stainless steel faceplate •• Standard 2x4 electrical junction box
•• Open/Close/Stop •• Polycarbonate enclosure
Features
•• Steel back box •• Architectural aluminum faceplate •• Tamperproof*
*Key required to remove cover on tamperproof models.
Three-Button Control Stations with Keyed Lockout
Two-Button Control Stations
• Allows complete control of gate
• May be used to Open and Close all gate operators
• Open and Close buttons can be locked out of operation with the key control
• Warning: This control will not stop the gate. Use another control that has a Stop button in conjunction with this control.
• On/Off, maintained key positions, key removable in either position • May be used to turn on or turn off other control equipment
Model
G02 406
Model
G02 102
List Price
List Price
$27.00
Description
2-button station
NEMA Rating
$162.00 3-button station with two-position maintained key control NEMA 4/12
NEMA Rating
NEMA 1
Mount Style
Surface
Mount Style
Surface
Features
•• Open/Close/Stop •• Die-cast metal enclosure •• On/Off key control, key removable in either position
Description
Features
•• Open/Close •• Steel enclosure
• Should not be used to operate gate Image Not Available
• May be used on all operators Model
G02 407
GC 814-WC
GC 814
List Price
$87.00
$311.00
$265.00
Description
Two-position maintained key control
Key entry head with cylinder
Key entry head without cylinder
Mount Style
Surface
Post mount
Post mount
Features
Outdoor, NEMA 4/12, On/Off key control, key removable in either position, die-cast metal enclosure, non-tamperproof
Mortise cylinder can be re-keyed or replaced to match existing locks, black housing with stainless steel faceplate, vandal-resistant, non-tamperproof
Mortise cylinder can be re-keyed or replaced to match existing locks, black housing with stainless steel faceplate, vandal-resistant, non-tamperproof
ACCESSORIES
ACCESSORIES
• May be used on all gate operators
Two-Position Keyswitch
Emergency Stop Control Station • May be used on all gate operators
106
Extra Keys
Image Not Available
Model
G02 401 S
G02 401 SP
AEXITP
List Price
$86.00
$29.00
$75.00
Model
G02 406 1
Description
1-button (stop) station
1-button (stop) station
1-button (stop) station
List Price
See Parts Price Book
NEMA Rating
NEMA 4
NEMA 4X/13
NEMA 3R, 4, 12
Description
Keys for all non-tamperproof models (2 pcs)
Mount Style
Surface
Surface
Surface
Features
Die-cast metal enclosure
Polycarbonate enclosure
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
•• Includes N/O and N/C contacts •• Polycarbonate enclosure •• No legend
107
TABLE OF CONTENTS STAND-ALONE ACCESS CONTROLS
ACCESS CONTROLS
MINIkey System....................................................................................................... 110 Wireless Keypad and Push-Button Controls.............................................................. 111 LiftMaster® Passport™ Stand-Alone Card Reader..................................................... 112
109
STAND-ALONE KEYPAD SYSTEM
WIRELESS KEYPAD AND PUSH-BUTTON CONTROLS
Smart and Simple Access Control Solution
Wireless Access Control Keypad
The MINIkey is a self-contained keypad system for the control of door and gated entrances. For applications that require an entry and exit keypad, or for control of a secondary entry point, the MINIkey supports an optional remote keypad unit that connects directly to the main unit. Both the MINIkey and remote keypad units are engineered to be rugged and vandalresistant and will enhance the site with a well-crafted look for interior or exterior use. They consist of a brushed stainless steel faceplate with a recessed side-lit metal keypad for excellent visibility day or night. Despite its compact size, the MINIkey is loaded with many features not normally found in other single door and gated entry access control systems.
• One-time code: Single use codes for visitors
• Combines the simplicity of wireless installation with the robust feature sets of higher-priced keypad controllers • Wireless control of up to 4 gates • Lockout mode: Locks system indefinitely for added security • Up to 500 ft. range • Keypad lighted when motion is detected
1-Year Warranty
Model
WKP5LM3
WKP250LM3
List Price
$161.00
$250.00
Description
5 Code
250 Code
ACCESS CONTROLS
ACCESS CONTROLS
MINIkey
Standard Features • Variable Entry Code Length - Entry codes can be programmed using 4 or 5 digits and can activate a single relay or both relays
• Non-Volatile Memory
• Strikes & Out - The system can be programmed to permit from 1 to 10 attempts prior to engaging the lockout
• Lighted Keypad
• Two Relays - These relays can be controlled individually or together • Time Clock Input
• Lightning Protection • Vandal-Resistant Design • Relay Hold • Password Protection
Ordering
Wireless Single Push-Button Control • Wireless control of 1 gate • Up to 500 ft. range • Functions in the same manner as a remote control Model
WPB1LM3
List Price
$161.00
grained stainless steel - surface mount Model Description List Price MK500GS 500..........................................................................................................................................................................................$530.00
grained stainless steel - flush mount MK500GF 500.........................................................................................................................................................................................$530.00
accessories SNARKLS SNALSURGE
Remote Keypad, Grained Stainless Steel (for protecting any additional entry.........................................................................$385.00 or exit location at the site) Low-Voltage Surge Suppressor (for added protection to the power inputs.................................................................................$61.00 during low-voltage storm surges)
PED42
42" Pedestal, multiple-hole configuration faceplate, pad mount, 2" x 2" square post,...........................................................$157.00 black powder coated, weather-resistant finish
Wireless Three-Button Control Station • 3 large button control • Up to 500 ft. range • Use only with Chamberlain® Logic 4 and Medium-Duty Logic commercial operators • Functions in the same manner as a 3-button remote (333LM) Model
WPB3LM3
List Price
$120.00
TECHNICAL INFORMATION SPECIFICATIONS Capacity
500
Power
12V AC or 13.5V DC
Dimensions
110
•• Surface Mount – 4-1/2" H x 4-1/2" W x 3-1/2" D •• Flush Mount – 4-3/4" H x 4-3/4" W x 3" D
Shipping Weight: 6 lbs.
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
111
PPLX PASSPORT™ STAND-ALONE PROXIMITY CARD READER
Components
Card access has been out of reach for most owners of small to medium sized businesses. The cost of technology is prohibitive and up to this point has been designed for large government, commercial and industrial users. The LiftMaster® Stand-Alone Proximity Card Reader (Model PPLX) offers high-end access control and security in a simple stand-alone format. This system allows for up to 50,000 user proximity cards or keyfobs in minutes. Also, the PPLX allows for simple deletion of lost or stolen cards without the need to re-program the entire user set. Rugged and durable, the PPLX is sealed in a weatherproof (IP67) enclosure and can be easily mounted to any flat interior/exterior surface, or installed in any single-gang electrical enclosure. For convenience, a handheld radio programming unit (Model PPRP) eliminates the need to bring a laptop computer to program the stand-alone unit.
Model PPLX
Description List Price Stand-Alone Proximity Reader..................................................................................................................................................$400.00
PPRP
Proximity Radio Programmer....................................................................................................................................................$135.00
PPCSC
Proximity Card (Clamshell)..........................................................................................................................................................$5.00
PS12D2A
Power Supply 12VDC 2.0A..........................................................................................................................................................$37.50
KITS
1-Year Warranty
Model PPRO
Description List Price Passport™ S/A Prox Reader. Includes (1) Reader and (1) Power Supply.................................................................................$437.50
PPRKO
Passport™ S/A Basic Prox Kit. Includes (1) Reader, (1) Power Supply and (1) Programmer...................................................$572.50
PPRK100
Passport™ 100-Card Prox Kit. Includes (1) Reader, (1) Power Supply, (1) Programmer and (100) Cards...........................$1,047.50
PPRK250
Passport™ 250-Card Prox Kit. Includes (1) Reader, (1) Power Supply, (1) Programmer and (250) Cards...........................$1,697.50
ACCESS CONTROLS
ACCESS CONTROLS
Does Your Business Need a More Secure Method of Access Control?
ORDERING
Standard Features • 6" Read Range
Model PPRP
• 50,000 User Capacity
Handheld programmer for use with LiftMaster® model PPLX, Stand-Alone Proximity Access Control Device.
• Programmable Output Relay (NO/NC) • Multiple Wiegand Protocol (Sentex®, 26-Bit Industry Standard, Passport™) • “Latch Mode” to Hold the Door or Gate Open • Timed Anti-Passback Logic • Programmable as Stand-Alone or Wiegand Pass-through • Simple-to-Use Handheld Radio Programmer (Model PPRP)
TECHNICAL INFORMATION SPECIFICATIONS Power Requirements
5-14 VDC, 150mA (max. load)
Outputs
•• SPST Solid-State Relay. 1A max. @ 60 VAC or DC •• Normally open or normally closed (field programmable)
Inputs
•• Default is Remote Open (requires contact closure) •• Also programmable as Bicolor (Red or Green) LED Control or Buzzer/LED Control for online systems (see Operating Guide)
Wiegand Output
Environment
•• Any Wiegand Format up to 40 bits. •• Maximum Distance: 500 ft. - 5 or 6 conductor 20-gauge shielded cable •• Access Control Unit and Cards •• Ambient Temp. -40° to 70°C (-40° to 158°F) •• Humidity 0 to 95% (non-condensing) Shipping Weight: 6 lbs.
112
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
113
TABLE OF CONTENTS TELEPHONE ENTRY SYSTEMS
TAC Family
Single Tenant Telephone Access System...................................... 116
EL25
Single/Multi-Tenant Telephone Entry System................................. 118
EL2000
Multi-Tenant Telephone Entry System........................................... 120
Dial Code®
Multi-Tenant Telephone Entry System........................................... 122
Icon26™
Multi-Tenant Telephone Entry System........................................... 124
Dial Code® and Icon26™ Accessories............................................ 126
Infinity
Multi-Tenant Telephone Entry System........................................... 130
TELEPHONE ENTRY 115
TAC FAMILY Single Tenant Telephone Access Systems
ORDERING
TAC2CK Simplify Your Life with LiftMaster® Model TAC1
Restore or replace your entire telephone access unit with TAC2CK. Kit includes back box and retrofit TAC2C.
The LiftMaster® Model TAC1 System provides wired communication and secure access control at the gate or door. Homeowners can use any touch-tone phone in the home to speak to a visitor, and then grant or deny access through their gate or door.
TAC2CK
TAC1 Model TAC1
TAC1
Attractive and Durable Hardwired for power and connected directly to your existing telephone line, the TAC1 greets visitors with a high-visibility backlit keypad and attractive styling. And its rugged, tamper-resistant polycarbonate enclosure is engineered for maximum impact resistance without dents or corrosion.
The Power Is in Your Hands The TAC1 is simple to use and allows the homeowner or small business to greet visitors, grant or deny access, or activate several system modes, all from the convenience of their touch-tone phone.
TAC1 Standard Features • Flexible Dual Control Feature: The TAC1 can be connected to two devices such as a door or a gate, using the two independently controlled relays or wirelessly using Security+® technology standard, or any combination of the two
Standard Features cont.
TAC2
• Security+® Rolling Code Technology: Provides seamless wireless communication between LiftMaster® door and gate operators • Entry Codes: Up to 200 4-digit codes can be set as permanent or one-time-use only • Remote Open: Open 2 entrances independently from your home or office • Party Mode: To open, and hold your entrance open
UL Listed 12-Volt AC (20VA) Transformer included Alternate (10 to 16 volts AC, 20VA or 12 to 24 volts DC, 500mA) Operating Temperature 10ºF to 140ºF TAC1 Shipping Weight: 4 lbs.
(2) Independently controlled (latched & timed) 10 Amp (form C) relays 8.5"
*1812 DoorKing is a trademark of DoorKing
TAC1 SPECIFICATIONS
5.25"
+®
(2) 315 MHz (parallel Note: For additional options andSecurity information seewireless the Cardschannels and Readers section inoperation this book. to relays) Diagnostic and Status LEDs On-board surge suppression Bell REN standard: 3.0
TAC2C Shipping Weight: 2 lbs.
TAC2 SPECIFICATIONS UL/CEC Listed 16-Volt DC 2.5 Amp Transformer included
TELEPHONE ENTRY
TELEPHONE ENTRY
TAC System Metal Enclosure (No Radio)...............................................................................................................................$1,086.60
6"
• Call Forward: Allows you to greet a visitor, even when you’re not home
The LiftMaster® Model TAC2D System provides new life to your damaged, malfunctioning or old 1812* telephone entry unit.
Alternate (10 to 16 volts AC, 20VA or 12 to 24 volts DC, 500mA) TAC2D
TAC2CK Shipping Weight: 6 lbs.
Operating Temperature 10ºF to 140ºF (2) Independently controlled (latched & timed) 10 Amp (form C) relays Diagnostic and Status LEDs
• Flexible Dual Control Feature: TAC2 can be connected to two devices such as a door or gate, using the two independently controlled relays
TAC2D Enclosure not included. Shipping Weight: 3.5 lbs.
On-board surge suppression Bell REN standard: 3.0
Note: TAC2 Products do not have the radio features of TAC1
• Entry Codes: Up to 200 4-digit codes can be set as permanent or one-time-use only
116
TAC Retrofit for 1812*..............................................................................................................................................................$910.00
TAC2CK
8.75"
• Intercom Mode: Useful to make wired phones active for access in “Cellular Only” homes
The LiftMaster® Model TAC2C System provides new life to your damaged, malfunctioning or old CJ1 Crown Jewel telephone entry unit.
• Call Waiting: Allows a person to answer a call from the door or gate while in the middle of another outside call
TAC2D
• Do Not Disturb: Silence the telephone call mode for additional privacy
TAC2D
• Distinctive Ringing: Provides a unique double-ring on the system’s main telephone line to distinguish between a standard phone call and a visitor request call
Description List Price TAC Retrofit for Crown Jewel....................................................................................................................................................$860.00
TECHNICAL INFORMATION
• Vacation Mode: Locks the system down when no administrator is present
TAC2C
TAC2 Standard Features
Model TAC2C
*1812 is a trademark of DoorKing
TAC2 Models Are Single Tenant Telephone Access Control Retrofit Systems
TAC2C
Description List Price Single Tenant Telephone Access System with Radio.............................................................................................................$1,050.00
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
Optional Powder Coated Steel Enclosure Model SNRHCJ1 (Enclosure only) Model TAC2CK (Kit that includes Models TAC2C and SNRHCJ1)
117
EL25 single/multi-tenant telephone entry system
Expanded Capacity. Enhanced Versatility.
UNITS
The EL25 is beautifully engineered for private residences, yet powerful and adaptable enough to be used in apartment buildings, condo complexes, office parks and commercial sites. The EL25 is capable of accepting up to 2,000 totally flexible codes, making the EL25 ideal for virtually any installation. Unlike other systems, the EL25 may be purchased as a base unit or can be ordered with optional plug-in modules. This allows you to choose only the plug-in modules you need depending on the specifics of the job – enabling you to offer custom solutions right off the shelf without special orders.
• Do Not Disturb - Assignable by tenant
Intelligent Features Built-in Functionality
• Call Forwarding
• 2,000 total codes
Standard Features • Call Waiting • Recessed, Lighted, ADA-Compliant Keypad • Auto Sensor Input - Automatically dial the residence when a vehicle approaches the property • Call Button • Distinctive Ringing - Double ring to distinguish a visitor request call • Entry Codes - Programmable codes can be time-restricted or established as one-time use only • Holiday Programming - Up to 16 separate holidays
Description List Price Telephone Entry/Access Control System - Gray.....................................................................................................................$1,537.00
EL25ND
Telephone Entry/Access Control System - Nickel...................................................................................................................$1,537.00
EL25SD
Telephone Entry/Access Control System - Silver....................................................................................................................$1,537.00
• 4 assignable and programmable built-in relays
Model RFMODKT3
Description List Price 315MHz RF Module for remote access with Passport™ transmitters......................................................................................$160.00
WOMODKT
Wiegand Module that supports two Wiegand compatible remote access devices....................................................................$192.00
EL25DVRCAMKT
DVR Compatible Low-Lux Color Camera Kit - 480 lines of resolution......................................................................................$578.00
ESSWOKSG
Wiegand Compatible Keypad – single gang mount.................................................................................................................$495.00
HIDWOKPRO
Wiegand Compatible Combination Keypad and Proximity Reader............................................................................................$588.00
ELDIB
EL Family Lighted Directory Insert Black Housing....................................................................................................................$413.00
ELDIG
EL Family Lighted Directory Insert Dark Gray Housing.............................................................................................................$413.00
ELDIN
EL Family Lighted Directory Insert Nickel Housing...................................................................................................................$413.00
• Mounting versatility - Landscape or portrait
Accessories
• 3 available finishes - Nickel, Silver and Gray
Model
Description
Optional Features
PED42
42" Pedestal, multiple-hole configuration faceplate,..............................................................................................................$157.00 pad mount, 2" x 2" square post, black powder coated weather-resistant finish
PED64
64" Pedestal, multiple-hole configuration faceplate, ............................................................................................................$157.00 in-ground mount, 2" x 2" square post, black powder coated weather-resistant finish (Ideal for installers who wish to save time by pouring cement and installing the pedestal in the same visit)
Plug-in Modules - Optional plug-in adaptability lets you expand the EL25 to work with many different types of controls. A two-reader Wiegand module lets you add card readers, keypads and prox readers, all with full activity tracking. An RF module with programmable Passport™ transmitters provides convenient remote access control. Lighted Paper Directory - The EL25 is also available as a controlleronly unit that can be paired with a lighted paper directory in gray, nickel or black.
List Price
TECHNICAL INFORMATION 10-1/4"L
• Anti-Passback - Timed anti-passback or true anti-passback
SPECIFICATIONS
• Security Lockout • Automatic Gate/Door Unlock Schedule - Entry points may be configured to automatically open or lock at set time periods • Transaction Monitoring - A minimum of 4,000 transactions are stored in the unit including date, time, unit ID and transaction
TELEPHONE ENTRY
TELEPHONE ENTRY
• Time Zones - Up to 62 different time zones with three segments each can be created for access/no-access schedules
Model EL25GD
OPTIONS
1-YEAR WARRANTY
Exclusive Features
ORDERING
6"H 4"D
• Activity Reports
Colors
Nickel, Silver, Gray
Mounting Styles
Portrait or Landscape
Power
12VAC
Note: For additional options and information see the Cards and Readers section in this book.
• Remote Updates - Firmware updates and upgrades may be made via a remote computer Enhanced Digital Processing: New enhanced software/firmware capability to optimize connectivity for POTS service delivered over digital media (like Cable, DSL, and Vonage).
Shipping Weight: 11 lbs.
118
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
119
EL2000 multi-tenant telephone entry system
Expanded Capacity. Enhanced Versatility.
UNITS
The EL2000 will change your expectations of what a telephone entry system should look like. The EL2000 is designed to complement virtually any gated community and is flexible enough to be used in apartment buildings, condo complexes, office parks and commercial sites The EL2000 features a 5-inch backlit LCD screen; the unit clearly displays up to 4 lines with 20 characters per line, making it a great choice for multi-tenant installations. The EL2000 is capable of accepting up to 2,000 totally flexible codes. These codes can be programmed as directory codes or access codes, making the EL2000 ideal for virtually any installation. Unlike other systems, the EL2000 may be purchased as a base unit or ordered with optional plug-in modules. This allows you to choose only the plug-in modules you need depending on the specifics of the job – enabling you to offer custom solutions right off the shelf without special orders.
• Remote Access Diagnostics • E-Z Scan - Cards and Passport™ transmitters can be programmed into the EL2000 simply by utilizing the card reader or radio receiver • Voice Prompts - Guides installers through system setup at the unit’s main keypad and provides assistance to end users with the push of a button (ADA application) • Enhanced Line Noise Tolerance • Legacy Database Conversion - Replacing an existing Sentex® Telephone Entry System is a snap with Versa XS™ 2.0 software; transfer any information retained in your existing Sentex® software database to Versa with the click of your mouse
• Holiday Programming - Up to 16 separate holidays • Time Zones - Up to 62 different time zones • Anti-Passback - Timed anti-passback and true anti-passback • Security Lockout • Automatic Gate/Door Unlock Schedule - Entry points may be configured to automatically open or lock at set time periods
Telephone Entry System, LCD Unit - Nickel...........................................................................................................................$2,359.00
OPTIONS
WOMODKT
EL25/EL2000 Wiegand Output Module Kit ..............................................................................................................................$192.00
ESSWOKSG
Wiegand Output Keypad...........................................................................................................................................................$495.00
Standard Features cont.
HIDWOKPRO
Combo Keypad/Card Reader Wiegand Output..........................................................................................................................$588.00
• Transaction Monitoring - A minimum of 4,000 transactions are stored in the unit including date, time, unit ID and transaction
ELHTRKT
EL2000 LCD Display Heater.....................................................................................................................................................$193.00
ELLCDKT
EL2000 LCD Field Kit...............................................................................................................................................................$605.00
• Activity Reports - Property managers have the ability to print database, system and history reports
ELTRMKT
EL2000 Trim Plate Kit..............................................................................................................................................................$110.00
• Remote Updates - Firmware updates and upgrades may be made via a remote computer and modem connection • Postal Lock Provision - The EL2000 supports a switch kit that integrates with a U.S. Postal Service lock; this allows postal carriers entry to a controlled area using a U.S. Postal Service key
Intelligent Features Built-in Functionality • 2,000 total codes • Detachable hinge design lets you mount the unit on the back plate for ease of wiring and installation
• Entry Codes
EL2000LND
EL25/EL2000 RF Module Kit 315MHz.......................................................................................................................................$160.00
• Recessed, Lighted, ADA-Compliant Keypad
• Distinctive Ringing - Double ring to distinguish a visitor request call
Telephone Entry System, LCD Unit - Gray..............................................................................................................................$2,359.00
RFMODKT3
• 4 assignable and programmable built-in relays
• Call Button
EL2000LGD
Description List Price EL2000 DVR Camera Kit..........................................................................................................................................................$578.00
• Call Waiting • Auto Sensor Input - Automatically dial the residence when a vehicle approaches the property
Description List Price Telephone Entry System, LCD Unit - Black............................................................................................................................$2,359.00
TECHNICAL INFORMATION 12"L SPECIFICATIONS Colors
Nickel, Black, Gray
Mounting Styles
Portrait
Power
12VAC
• 3 available finishes - Nickel, Black and Gray 15"H
Optional Features • Plug-in Modules - Optional plug-in adaptability lets you expand the EL2000 to work with many different types of controls. A two reader Wiegand module lets you add card readers, keypads and prox readers, all with full activity tracking. An RF module with programmable Passport™ transmitters provides convenient remote access control. • Exclusive Security - An optional black and white or color CCTV camera ensures added security. A color low-lux camera compatible with DVRs is also available.
TELEPHONE ENTRY
TELEPHONE ENTRY
Standard Features
Model EL2000LBD
Model EL2000DVRCAMKT
1-YEAR WARRANTY
Exclusive Features
ORDERING
Note: For additional options and information see the Cards and Readers section in this book.
3-5/8"D Enhanced Digital Processing: New enhanced software/firmware capability to optimize connectivity for POTS service delivered over digital media (like Cable, DSL, and Vonage).
Shipping Weight: 25 lbs.
120
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
121
Dial Code® multi-tenant telephone entry system
ORDERING PACKAGE
Designed to Be Easier to Read, Easier to Use and Easier to Install
Model (NEW) DIALCODE
The Dial Code® LC and VF telephone entry/access control systems offer the latest technology for safe, convenient access in buildings with up to 1,000 tenants. The bright, easy-to-read, 2-line screen includes a built-in resident directory for guests. Visitors can call and speak to any resident by simply entering the tenant’s 3-digit personalized code. The tenant may then grant access by pressing a number on their telephone or deny access by simply hanging up.
Description Dial
Code®
Directory Capacity
1000 Package with Modem, Cards & SW
List Price
1,000..............................................$3,737.00
Built-in Power Backup/Surge Protection The system battery provides full functionality for up to five hours after the power goes out. For added protection, the system includes non-volatile memory cards, a non-volatile clock and a high-level surge protection board. This board is designed to prevent damage.
3-YEAR WARRANTY Dial Code VF
Dial Code LC
Patented feature allows easy removal of the central processor for convenient programming. For more advanced programming, an optional modem and software is available; EWC485 compatibility.
Standard Features • Two-Line Large LCD or Super-Bright VF Display that is sunlight readable and backlit for low-light applications
• Six-Digit Resident Keycode Access
• 31 Remote Access Devices (with optional comm. card): 32 programmable “groups,” 32 programmable 7-day timer “templates”
• Resident-Controlled Access by Dialing “5” for Door or “9” for Gate; for security, touch-tones through the microphone are ignored by the system
• Built-in Power Failure Backup:
• Two Independent 7-Day Timers per Relay Output for Door and Gate Control
--Built-in battery provides system full functionality for up to five hours --Non-volatile memory cards with unlimited read/write cycles --Non-volatile clock and calendar • Two Slots for Memory Cards – Second slot for optional Remote Communicator card
• Digital Voice Help Feature to guide user • History Buffer up to 8,000 Transactions • 60 Programmable Utility Keycodes per System: --Independent Time Zones and Day of Week Restrictions per Utility Code
• Three-Digit Resident Dialing
The Wireless Communicator Setting up the Dial Code® system using the EWC485 eliminates the cost and time of digging. Plus, it’s easily expandable at any time in the future. Compatible with Icon26™ or Dial Code® systems manufactured after 1/3/05. For systems manufactured prior to this date, call Chamberlain for hardware upgrade options.
• FCC Part 68, 15 & Canadian DOC Approvals; ETL Approved: UL 294 • Surge Protection: --Power line: 5000V --Phone line: 800V
TECHNICAL INFORMATION
• Immune to 25,000V Electrostatic Discharge • Power Input: 12VAC, 1.6 Amp UL-listed wall plug transformer (supplied)
11-1/4"W
• Operating Environment:
TELEPHONE ENTRY
TELEPHONE ENTRY
• High-Quality Digital Communication System with active noise filtering
Double Box Design
--Temperature: --Dial Code®: -4˚F to 165˚F --Relative Humidity: 5% to 95% (non-condensing)
--Independent Expiration Date per Code
16-7/16"H
--One-Time Use Utility “Flash Code” • Two Output Relays with Independent Strike Times: Both relays have all contacts accessible (NC, NO, C) • Postal Lock Ready • Programmable “Unlisted Resident” Feature protects individual resident’s privacy
3-3/16"D
Shipping Weight: 29 lbs.
122
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
123
Icon26™ multi-tenant telephone entry system
PACKAGE
Sophisticated Technology for Advanced Multi-Tenant Access The Icon26™ is a premium telephone entry/access control system for buildings with up to 1,000 tenants. Engineered to provide safe, convenient access for residents and guests, the system also offers added expandability and programming simplicity for installers and property managers. Featuring a high-resolution, 10" LCD screen, the unit clearly displays up to 26 names at a time and is easily readable in all light conditions, including direct sunlight. This, combined with its capability to operate in high seasonal temperatures (up to 165ºF), makes this system an excellent choice for virtually any multi-tenant location. The Icon26™ also includes a long list of built-in and exclusive features, such as a scrollable directory, optional camera capability, audio “help” assistance and a patented “double box” design for easier programming. Plus, the system is fully expandable to control up to 31 remote locations with 32 programmable user groups and 32 programmable 7-day timer templates.
• Programmable “Unlisted Resident” Feature protects individual resident’s privacy • Six-Digit Resident Keycode Access
• 31 Remote Access Devices (with optional comm. card):
• Three-Digit Resident Dialing
--32 programmable “groups”
• System Mutes Speaker during Dialing for Security
--32 programmable 7-day timer “templates”
• Resident-Controlled Access by Dialing “5” for Door or “9” for Gate; for security, touch-tones through the microphone are ignored by the system
• High-Quality Digital Communication System with active noise filtering
• ETL Approved: UL 294
• 60 Programmable Utility Keycodes per System:
--Relay ports
• Relay Output for 5-Second VCR Time Lapse Recording per Authorized Access • Postal Lock Ready 124
specs
--Power input port --RS485 ports
• Two Output Relays with Independent Strike Times: Both relays have all contacts accessible (NC, NO, C)
TECHNICAL INFORMATION
• Surge Protection Board with 6000V, 3000A Immunity on the following:
• History Buffer up to 8,000 Transactions
--One-time use utility “Flash Code”
Setting up the Dial Code® system using the EWC485 eliminates the cost and time of digging. Plus, it’s easily expandable at any time in the future. Compatible with Icon26™ or Dial Code® systems manufactured after 1/3/05. For systems manufactured prior to this date, call Chamberlain for hardware upgrade options.
• FCC Part 68, 15 & Canadian DOC Approvals
--Telephone line port
--Independent expiration date per code
The Wireless Communicator
• Two Independent 7-Day Timers per Relay Output for Door and Gate Control
• Digital Voice Help Feature to guide user
--Independent time zones and day of week restrictions per utility code
1,000..............................................$5,325.00
TELEPHONE ENTRY
TELEPHONE ENTRY
• Two Slots for Memory Cards – Second slot for optional Remote Communicator card
Icon26™ 1000 Package with Modem, Cards & SW
List Price
Patented feature allows easy removal of the central processor for convenient programming. For more advanced programming, an optional modem and software is available; EWC485 compatibility.
• High-Resolution, 10", Large LCD Screen that is sunlight readable and backlit for low-light applications displaying 26 viewing names
--Non-volatile clock and calendar
ICON26
Directory Capacity
Double Box Design
• “Exit Switch” Ready
--Non-volatile memory cards with unlimited read/write cycles
Description
The system battery provides full functionality for up to five hours after the power goes out. For added protection, the system includes non-volatile memory cards, a non-volatile clock and a high-level surge protection board. This board is designed to prevent damage.
Standard Features
--Built-in battery provides system full functionality for up to three hours
Model (NEW)
Built-in Power Backup/Surge Protection
3-YEAR WARRANTY
• Built-in Power Failure Backup:
ORDERING
--Input ports • Immune to 25,000V Electrostatic Discharge • Power Input: 12VAC, 50VA UL-listed wall plug transformer (supplied) • Operating Environment: --Temperature: --Icon26™: -4˚F to 165˚F --Relative Humidity: 5% to 95% (non-condensing)
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
Shipping Weight: 29 lbs.
125
DIAL CODE® and icon26™ ACCESSORIES multi-tenant telephone entry systemS
Card Readers & Accessories
System Accessories
Card Readers & Accessories
Model
MODEMSOFTWARE
INTERNALMODEM
ICON26CAMERA
List Price
$75.00
$425.00
$787.00
Description
Optional programming software for Dial Code® and Icon26™ panels. Compatible with Windows® 95B, 98, 2000, ME and XP
Optional modem for use with Dial Code® and Icon26™ panels
This compact, built-in camera is only 22mm x 26mm and is capable of 10-bit DSP, 330-line high-resolution output 5 LUX minimal illumination
Remote Controls (418MHz)
ECR485B
ECR485W
ECR485T
RSKEY*
RSCARD*
RSBADGE*
List Price
$853.00
$853.00
$853.00
$9.00
$8.00
$5.00
Elite® electronic key
Elite® ThinLine card
Elite® badge card
Description
® card reader with Elite® card reader with Elite® card reader for Elite wide gate thin aluminum gate gooseneck and post framealuminum attachment for frame attachment for mounting with heavy door frame or standard door locked housing post mounting frame mounting
*Minimum order for all cards is 50. Cards must be ordered in increments of 50.
Model
DT418
DT4182
DT4184
DTH418
1-9 Units
$44.00
$56.00
$61.00
$4.00
10-99 Units
$42.00
$54.00
$59.00
Not Applicable
100+ Units
$40.00
$52.00
$57.00
Not Applicable
Description
Model
Elite®
1-button decodable remote control
Elite®
Elite®
2-button decodable remote control
4-button decodable remote control
Installation/ Mounting Model
ICONTOWER1
ICONTOWER2
ELITETOWER1
ELITETOWER2
ICON26FMK
DCFMK
List Price
$2,514.00
$650.00
$1,568.00
$425.00
$732.00
$515.00
15" additional height stand for ICONTOWER1™
Freestanding installation for Dial Code®. Featuring a high-tech design and powder coated stainless steel construction
15" additional height stand for ELITETOWER1™
Flush mount kit for Icon26™ panels
Flush mount kit for Dial Code® panels
Visor/belt clip for DT418 remotes Freestanding installation for Icon26™ panels
Description
126
Image Not Available
Model
ERRB485
EKP485
EA485
List Price
$800.00
$660.00
$495.00
Description
Elite® remote radio receiver with locked housing
Elite® lighted keypad with LED indicators and locked housing
26-bit translator board with locked housing. Reads other Wiegand devices including: Amtech™ SmartPass AI 1620, Sentex® CLIKcard, DoorKing™ SuperHET™
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
Surge Protection Model
TLSS
LVSS
DTK1FS
R4SS
List Price
$80.00
$80.00
$60.00
$80.00
Description
Surge Protection for Telephone Lines 9000Amp protection
Surge Protection for Power Transformer 12VAC (low voltage)
Wall Mount Surge Protection for Power Transformer 120VAC (high voltage)
Surge Protection for RS485 2000Amp protection
TELEPHONE ENTRY
TELEPHONE ENTRY
Receivers (418MHz)
127
DIAL CODE® and icon26™ ACCESSORIES EWC485
ORDERING units
Expandable Wireless Access Control Solution Creating an integrated wireless perimeter access control system for small to large residential communities, office complexes, commercial facilities and industrial parks across numerous access points and long distances. The LiftMaster® Wireless Communicator allows you to fully integrate a wireless system from the main LiftMaster® Icon26™ or Dial Code® telephone entry unit to remote access points such as card readers, keypads and radio receivers. All without the time-consuming expense of digging and trenching to lay cables and wires, resulting in less time, hassle and cost. In fact, setup of the Wireless Communicator system can be done quickly, effectively and reliably, providing a solution comparable to a traditional wired system. And you can add additional access points at any time in the future to create a system with up to 31 remote access points, up to 6,000 ft. apart.
Model EWC485
Description List Price Wireless Communicator........................................................................................................................................................$1,035.00
EWC4852
Wireless Communicator - 2 Pack..........................................................................................................................................$2,060.00
processor retrofit upgrade Model T027M
Description List Price Upgrade an Existing Icon26™ or ........................................................................................................................................$1,900.00 Dial Code® LC (with modem)
T027
Upgrade an Existing Dial Code® LC (without modem)..........................................................................................................$1,600.00
T028M
Upgrade an Existing Dial Code® VF (with modem)...............................................................................................................$1,900.00
T028
Upgrade an Existing Dial Code® VF (without modem)..........................................................................................................$1,600.00
1-Year Warranty
Standard Features • LiftMaster RS485 and Wiegand Compatible ®
• Expandable to 31 Remote Devices with One Central Processor • Point-to-Point and Point-to-Multipoint Communication • Built-in Test Mode with LED Indicators • Installation Instructions Built Into Each Unit
Trenching around buildings, ponds, parking lots and roadways is not only difficult, it’s also expensive and labor intensive. The EWC485 eliminates the cost and time of digging. It also reduces callbacks to fix corroded or cut cable.
• 900MHz Spread Spectrum Technology
Simplified Installation
• Built-in Test Mode Allows You to Determine If the Location Is “Wireless Friendly”
The Wireless Communicator was designed for quick and easy installation. That’s because it has been engineered to integrate seamlessly with LiftMaster® Icon26™ and Dial Code® systems. Additionally, each communicator includes unique step-by-step installation instructions inside each unit for simple setup.
Optional Features • Antenna Cover Protects Antenna from Vandalism Potential • Solar Panel with Battery Pack Is Ideal for Remote Installations or as Emergency Backup
TECHNICAL INFORMATION SPECIFICATIONS
14" 14" 7"
4-1/4"
Maximum Range
6,000 feet within direct line of sight
Frequency
900MHz
Power
12V AC/DC, 20VA transformer
Mounting Height
minimum 7 ft.
4-1/4"
TELEPHONE ENTRY
TELEPHONE ENTRY
• Built-in Lightning Protection and Surge Suppression
No More Cables No More Hassles
Shipping Weight: 3.3 lbs.
128
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
129
Infinity multi-tenant telephone entry system
Refined, Robust, Reliable
Standard Features cont. • SPSWin Programming Software - Sentex Programming Software for Windows® (SPSWin) enhances the programming abilities of the Infinity system and has been developed for use with 95, 98, ME, 2000, NT and XP Windows®-based systems. Compatible with Win7 (Pro and Ultimate) based systems.
Engineered for exceptional performance and functionality, the Infinity Series combines the convenience of telephone entry with the flexibility of access control.
Power and Expandability This dynamic combination is designed with an extensive feature set to meet today’s needs and tomorrow’s growth. Each control panel can support card and code access for 2 doors or gates. In addition, the Infinity has the ability to network up to 16 panels for larger installation requirements.
Infinity M
• Forced Door Alarms - If an entrance monitored by an Infinity is forced open, an alarm condition will display at the SPSWin software screen to notify you of the event information. You can also set an alarm to trigger with the auxiliary relays.
Infinite Flexibility Perfect for securing any size office building or gated residential community. The LCDs utilize a high-contrast ratio and bright backlight for clear viewing in a wide range of environmental conditions. Names and codes are entered into the system through a handheld programmer or remotely with the optional SPSWin software.
1-YEAR WARRANTY
• Automatic Unlock Schedules - Automatic unlock schedules allow you to leave certain entrances open during business hours, allowing freedom of movement for vehicles, employees and customers.
Infinity L
The Infinity S features a 2-line LCD display of 16 characters each, 3/8"H; while the Infinity M supports 2 lines of 20 characters each, 1/2"H. The Infinity L boasts a large display, offering your choice of either 24 names of up to 13 characters each, or commercial firmware offering 12 names of up to 35 characters each. The Infinity B, with no display, can be installed alone or in conjunction with other Infinity models.
• Anti-Glare - In areas exposed to substantial sunlight, an anti-glare package can be installed to prevent direct exposure to the display, thus reducing glare.
Standard Features
• Programmed Talk Time - Talk time can be adjusted from 15 to 250 seconds to accommodate various entrance requirements.
• Full Duplex Communications - The system boasts two-way audio that is crisp and clear in even the most congested environments by employing echo cancellation technology. This technology prevents cross-talk between the speaker and the microphone and allows for higher volume levels.
• Postal Lock Provision - Infinity units support a switch kit that integrates with a U.S. Postal Service Lock. This allows postal carriers entry to a controlled area using a U.S. Postal Service Key. The postal lock is proprietary to the U.S. Postal Service and is acquired through them.
Anti-Passback This feature prevents two or more parties from gaining entry via the same code or card. Both timed and true anti-passback are available. Remote Management The software is carefully designed to offer virtually unlimited site management from a single host computer through a telephone line or direct connection. When it’s necessary to download information from the database, SPSWin streamlines the process of the distribution to the individual systems. Multi-Link A multi-link chain of up to 16 Infinity panels can be networked together for ease of programming. All panels communicate through the first unit in the chain. No-Phone-Bill Interface All Infinity units can operate independent of an outside telephone line, minimizing operating costs and allowing system use by tenants without phone service.
• Stainless Steel Housing (on surface mounted units) - All “S”, “M” and “L” units include stainless steel faceplates as standard to ensure long-lasting durability. To increase the resistance to vandalism and environmental conditions, these systems are also equipped with a standard stainless steel housing.
• Shared Phone Line Capability - Up to 2 Infinity units can be linked to a single phone line, saving building management the cost of additional phone line charges. Only one unit will control the shared phone line at a time.
• Long Distance and PBX Dialing - To allow for regions that utilize multiple area codes, Infinity systems accommodate sequences of up to 11 digits, as well as PBX extension sequences of up to 6 digits.
• Controlled & Programmable System Relays - This feature allows simultaneous control of the main gate and an auxiliary connection such as a second gate or door. The relays can also be controlled to activate for a set amount of time from 1 to 63 seconds.
• Variable Code Length - Directory Codes and Entry Codes can be configured for 4 or 5 digit lengths. • Battery Backup - Maintains clock and event record memory during power outages.
• Lightning Protection - Infinity systems have some protection on the power and telephone line connections. However, in an area where lightning is prevalent, external surge suppressors should also be used to minimize damage to the unit.
• Burglar Alarm Shunt - When access requests are authorized, the system triggers a relay, which in turn is wired directly to the externally monitored alarm panel, preventing false alarm conditions.
• CCTV Camera-Ready - The Infinity L and M are capable of hosting a black-and-white or color camera that provides live video directly to a television or monitor screen.
130
Infinity S
• Dual Ventilation Fans - The Infinity L unit comes standard with dual ventilation fans to ensure optimum performance of the large LCD display.
Time Zones Infinity systems manage up to 8 separate time zones, boosting system functionality to accommodate such commands as automatic door or gate unlock, or restricted personnel access. Seven of the 8 zones have 3 stop and start intervals each.
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
TELEPHONE ENTRY
TELEPHONE ENTRY
LCD Display Features
• Password Protection - Each Infinity can be customized with a 6-digit numerical password to ensure the security of database information.
Full Function
131
Infinity multi-tenant telephone entry system
Ordering
Infinity Accessories
Infinity Model Description
Directory Name & Telephone # Capacity Names
INF L HF 1000 A-GLR SS CAM
IL1000N
1,000
WITH NAMES
Shared Card & Code Capacity
List Price
2,000...........................$ 4851.00
IL500N
INF L HF 500 A-GLR SS CAM
500
WITH NAMES
3,000...........................$ 4851.00
ILH1000N
INF L HF 1000 HOOD CAM SS
1,000
WITH NAMES
2,000...........................$ 5027.00
ILH500N
INF L HF 500 HOOD CAM SS
500
WITH NAMES
3,000...........................$ 5027.00
IM1000N
INF M HF 1000 A-GLR SS CAM
1,000
WITH NAMES
2,000...........................$ 3087.00
IM500N
INF M HF 500 A-GLR SS CAM
500
WITH NAMES
3,000...........................$ 3087.00
IS1000N
INF S HF 1000 A-GLR SS CAM
1,000
WITH NAMES
2,000...........................$ 3087.00
IS500N
INF S HF 500 A-GLR SS CAM
500
WITH NAMES
3,000...........................$ 3087.00
IB4000N
INF B 4000 W/N OUTDOOR
WITH NAMES
4,000...........................$ 1650.00
IM500
INF M HF 500 A-GLR SS CAM
500
WITHOUT NAMES
16,000..........................$ 3087.00
IS500
INF S HF 500 A-GLR SS CAM
500
WITHOUT NAMES
16,000..........................$ 3087.00
IB20000
INF B 20000 WO/N OUTDOOR
WITHOUT NAMES
20,000..........................$ 1650.00
TECHNICAL INFORMATION
Model
CCAMKT
SNMHTR
SNASASHM
SNMMODB
List Price
$523.00
$275.00
$440.00
$462.00
Description
Color Camera Kit (available for Infinity M & L models)
Model
SNAPPL
SNARKLS
SPSWIN
SNAARM
List Price
$138.00
$385.00
$330.00
$2,288.00
Description
Mounting Plate, Large (required for post mounting)
Small Remote Keypad in a Lighted Housing
Infinity Series Windows®-Based Software (included with purchase of system)
Auxiliary Relay Module (for elevator control)
Heater, Factory Installed Stand-Alone Short-Haul Modem (available for the Infinity L, assists (for use between the computer and in cold weather climates) the first Infinity in a multi-link chain)
Internal 2400 Baud Modem
Model
ISFMKT
IMFMKT
ILFMKT
SNATSURGE
SNALSURGE
List Price
$400.00
$400.00
$425.00
$83.00
$61.00
Flush Mount Kit for Infinity L Models
Telephone Line Surge Suppressor (for added protection to the phone line inputs during low-voltage storm surges)
Low-Voltage Surge Suppressor (for added protection to the power inputs during low-voltage storm surges)
SPECIFICATIONS
Dimensions
INFINITY L
INFINITY B
12VAC @ 3.4 Amps peak, 13.5VDC @ 1.2 Amps (without readers)
12VAC @ 3.4 Amps peak, 13.5VDC @ 2.1 Amps (without readers)
12VAC @ 3.4 Amps peak, 13.5VDC @ 1.0 Amp (without readers)
•• Infinity “S” Surface Mount 16"H x 11-3/4"W x 3-1/4"D •• Infinity “S” Flush Mount 16-3/8"H x 12-3/16"W x 2-3/16"D •• Infinity “M” Surface Mount 16"H x 11-3/4"W x 4-1/4"D •• Infinity “M” Flush Mount •• 16-3/8"H x 12-3/16"W x 3-1/8"D •• Infinity “S & M” Flush Mount Bezel 18-13/16"H x 14-9/16"W
•• Infinity “L” Surface Mount 21"H x 16-7/16"W x 4-3/8"D •• Infinity “L” Flush Mount 21-5/6"H x 16-3/4"W x 3-1/8"D •• Infinity “L” Flush Mount Bezel 23-3/4"H x 19-1/4"W
Description
Flush Mount Kit for Infinity S Models
Flush Mount Kit for Infinity M Models
TELEPHONE ENTRY
TELEPHONE ENTRY
Power
INFINITY S & M
•• Outdoor Housing Surface Mount 16"H x 11-3/4"W x 3-1/4"D
Important note: Not all combinations are available depending on capacities selected. Note: For additional options and information see the Cards and Readers section in this book. Shipping Weight: Infinity S & M: 21 lbs. Infinity L: 35 lbs. Infinity L w/Hood: 36 lbs. Infinity B: 30 lbs.
132
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
133
TABLE OF CONTENTS ACCESS CONTROL ACCESSORIES
ACCESS CONTROL ACCESSORIES
Remote Controls/Receivers...................................................................................... 136 Cards....................................................................................................................... 138 Readers and Keypads.............................................................................................. 139 Pedestals................................................................................................................. 140 Surge Protection...................................................................................................... 141
135
Passport™ wireless ACCESS ACCESSORIES
ORDERING
Total Control with One Remote
PASSPORT™ SYSTEMS
ACCESS CONTROL ACCESSORIES
ACCESS CONTROL ACCESSORIES
Receivers/Remote Controls 315 MHz *Prices determined by Qty. - Net Price Model Description 1-11 12-23 24+
Passport™ technology is an evolutionary step in the development of a simpler, more effective method of managing the entrances within a gated community or commercial environment. Until now, property managers have had to manage several different radiocontrol transmitters for the main gate, tenant and visitor doors, even parking entrances. This is cumbersome and costly. With our Passport™ technology, residential and commercial property management is now simplified by an innovative single-transmitter solution. The integration abilities of the Passport™ technology enable it to work with LiftMaster® Security+® products, Sentex® and Elite® telephone entry and access control systems, as well as 3rd-party access systems supporting 26-bit formats.
3-Year Warranty - Receiver 1-Year Warranty - Transmitters
CPRPT
Passport Frequency Translater (from 390 MHz to 315 MHz)....................... $161.00 $161.00 $161.00
CPWR3
Receiver...................................................................................................... $157.50 $157.50 $157.50
CPT13
1-Button Visor Remote Control.................................................................... $16.65 $15.55 $14.50
CPT23
2-Button Visor Remote Control.................................................................... $19.95 $18.85 $17.75
CPT33
3-Button Visor Remote Control.................................................................... $19.95 $18.85 $17.75
CPT43
4-Button Visor Remote Control.................................................................... $21.50 $20.50 $19.50
CPTK13
1-Button Keychain Remote Control.............................................................. $15.75 $14.75 $13.75
CPTK13PH
1-Button Keychain Remote Control with...................................................... $22.00 $21.00 $20.00 HID Proximity (Please specify 26 or 30 bit)
CPTK33
3-Button Keychain Remote Control.............................................................. $19.95 $18.85 $17.75
CPTK33PH
3-Button Keychain Remote Control ............................................................ $24.25 $23.25 $22.25 with HID Proximity (Please specify 26 or 30 bit)
AUTOkey REMOTE CONTROLS - visor style*
Standard Features • Community Gates - Provide secure access to gated communities, industrial facilities and commercial sites and easily integrate with telephone entry and access control systems.
• Access Control - Keychain transmitter can include an HID proximity sensor for access control integration. Now you get total control with the push of a button or the wave of your hand.
• Garage Doors - Transmitter works seamlessly with all LiftMaster® operators and is compatible with vehicles using HomeLink® systems.
• Fixed Facility Codes - The receiver’s facility code (range 0-255) can be set to match the facility code of the access control system. This allows you to use Passport™ transmitters with any facility code and the receiver will convert the signal to match the access control system.
• Private Gates and Drives - Compatible with other LiftMaster® residential and commercial receivers for maximum flexibility.
Model
Description
SNAAK1V2* SNAAK2V2*
1 Button.............................................................................$41.00 $32.00 $30.00 2 Button.............................................................................$47.00 $38.00 $36.00
Power LEDs Frequency
Model
Description
SNAAK1K2* SNAAK2K2*
1 Button.............................................................................$45.00 $36.00 $34.00 2 Button.............................................................................$50.00 $43.00 $41.00
CLIKCARD REMOTE CONTROLS
136
10-50 51-200 201-500
501+
SNACC1V3FC2**
1 Button.............................................................................$64.00 $49.00 $44.00
$40.00
SNACC2V3FC2**
2 Button.............................................................................$71.00 $56.00 $51.00
$47.00
SNACC1K3FC2**
1 Button.............................................................................$64.00 $49.00 $45.00
$43.00
•• Receiver: 315 MHz or 390 MHz Narrow Band •• Remote Control: 315 MHz or 390 MHz SAW Stabilized (Output in Accordance with FCC Part 15)
SNACC2K3FC2**
2 Button.............................................................................$73.00 $55.00 $51.00
$49.00
Receiver: Non-Volatile
*Important ordering notes: *AUTOkey transmitters are available in 303 MHz; change last 2 to a 3 in the model number. If 303 MHz is needed, or a special ID is required, a 3-4 week lead time and $100.00 list upcharge apply. On standard or special orders, minimum order quantity is 10 transmitters and must be in multiples of 10.
•• Receiver: -40˚F to 185˚F; -40˚C to 85˚C •• Remote Control: -40˚F to 185˚F; -40˚C to 85˚C
**All CLIKcard and AUTOcard transmitters are available in 303 MHz; change the last 2 to a 3 in the model number. When ordering a transmitter, please replace the “FC” lettering with your choice of a Facility Code.
Receiver: 26 & 30 bit Wiegand Formats
Facility Codes are 30, 31, 32 and 33.
Receiver: 5 Wire Shielded/1,000 Feet
Enclosure
Receiver: Weather-Resistant NEMA 3 Rating
Dimensions
Receiver: 5-11/16" W x 4-1/8" H x 1-7/16" D
Encoding
501+ $32.00. $39.00
Receiver: Power, Noise, Data Transmission, Valid Message, Access Granted
Memory
Wire/Distance
10-50 51-200 201-500
CLIKcard transmitters, 30 bit/295 MHz - keychain style
Receiver: 16,000 Rolling Code Users (FIFO)
Output
$29.00. $35.00
•• Receiver: 12 Volts DC, 50mA •• Keychain: 3-Volt (1x 2032 Lithium Battery) •• Visor: 6-Volt (2x 2032 Lithium Batteries)
Buffer
Temperature Range
501+
AUTOkey REMOTE CONTROLS - keychain style*
CLIKcard transmitters, 30 bit/295 MHz - visor style Description Model SPECIFICATIONS
10-50 51-200 201-500
Remote Control: Narrow Band, Security+® Rolling Code Configuration
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
A 3-4 week lead time and $100.00 list upcharge apply on special orders requiring special facility codes or consecutive numbering. Shipping Weight: Passport™ Receiver: 10.4 ounces Passport™ Remote Control: 1.28 ounces
Some AUTOcard transmitters available as a special order. Call for pricing and lead time. A 3-4 week lead time applies on all AUTOcard transmitters.
137
ACCESS CONTROL ACCESSORIES CARDS
READERS AND KEYPADS
Cards
Readers
Model
Barium Ferrite Description
100 101-500 501-1000 1001+
SNACB3x Barium Ferrite.....................................................................$5.72 $4.62 $4.29 (x=Facility Codes, choose between 1-9)
$3.85
Wiegand SWIPE** Model
Description
100 101-500 501-1000 1001+
SNACWS3x
Wiegand Swipe/Insert..........................................................$7.15 $6.27 $6.05
$5.61
Model
Description
SNARNBFS3
30 bit, Surface Mount.................................................................................................................................................$725.00
SNARNBFF3
30 bit, Flush Mount.....................................................................................................................................................$925.00
SNARBFH3
30 bit, on a Housing................................................................................................................................................$1,020.00
SNARBFHL3
30 bit, on a Lighted Housing...................................................................................................................................$1,120.00
List Price
(If 26 bit is required change 3 to 2 at the end of the model number. Lead time is typically 3 weeks)
Wiegand Key.......................................................................$14.63 $12.43 $11.33 $10.12 SNACWK3x (x=Facility Codes, choose between 1-12)
Wiegand PROXIMITY Model
Description
Wiegand PROXIMITY**
SNARHIDPOINT
ProxPoint, 1" - 3" read range......................................................................................................................................$197.00
Model
Description
SNARHIDMINI
MiniProx, 3" - 5" read range.......................................................................................................................................$374.00
SNACPH3x
Basic Proximity....................................................................$4.95 $4.95 $4.95
$4.95
SNARHIDTHIN
ThinLine, 3" - 5" read range.......................................................................................................................................$374.00 ProxPro, 5" - 9" read range.........................................................................................................................................$462.00
100 101-500 501-1000 1001+
List Price
SNACPHISO3x
ISO Graphics........................................................................$8.80 $8.80 $8.80
$8.80
SNARHIDPRO
SNACPKH3x
Proximity Key.......................................................................$9.35 $9.35 $9.35
$9.35
SNARHIDPROH
ProxPro, on a lighted background...............................................................................................................................$682.00
SNARHIDMAXI
MaxiProx, 18" - 24" read range................................................................................................................................$1,089.00
PPLX
Passport™ Reader, Only.............................................................................................................................................$400.00
(x=Facility Codes, choose between 2 or 9)
Indala Model
Description
SNACPI3x
Basic Proximity....................................................................$6.60 $6.60 $6.60
SNACPKI3x
100 101-500 501-1000 1001+
Proximity Key.......................................................................$9.90 $9.90 $9.90
SWIPE
$6.60
Model
$9.90
SNARWGS Swipe..........................................................................................................................................................................$625.00
(x=Facility Codes, choose between 3 or 4)
ACCESS CONTROL ACCESSORIES
ACCESS CONTROL ACCESSORIES
SecuraKey
SNARWGSH3
Description
List Price
Swipe on a Housing....................................................................................................................................................$995.00
SNARWGK Key..............................................................................................................................................................................$572.00 *Important ordering notes:
SNARWGI Insert..........................................................................................................................................................................$682.00
Minimum orders – The minimum order quantity for all special artwork cards ordered is 250 cards and must be in multiples of 50. All other special card orders have a minimum order quantity of 100 and must be in multiples of 50. S pecial ordering – Prices are based on shipments of card numbers that are available from stock. When special numbering or facility codes are needed, a $100.00 (list) upcharge will apply. Minimum order quantity is 100 cards and lead time is typically 4 to 6 weeks. Please call to verify. **Notes: Overages and Underages – Overages of up to 20% or underages of up to 5% may occur on any Wiegand card or key order. The invoice will reflect actual quantity shipped rather than quantity ordered.
Keypads Wiegand KEYPADS
138
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
Model
Description
ESSWOKSG
Wiegand Compatible Keypad - single gang mount.....................................................................................................$495.00
List Price
HIDWOKPRO
Wiegand Compatible Combination Keypad And Proximity Reader...............................................................................$588.00
SNARKLS
Small Remote Keypad in a Lighted Housing...............................................................................................................$385.00
139
ACCESS CONTROL ACCESSORIES Pedestals
Surge Suppressors
• Faceplate with universal hole pattern to fit almost any access device
Lightning damage from direct hits or nearby strikes can potentially leave sites unsecured or inaccessible. Downtime and repair costs can be prevented or reduced with the use of surge suppression. LiftMaster® gate operators feature built-in surge suppression. But not all devices used on installations have this feature.
ACCESS CONTROL ACCESSORIES
• Black power coated finish, ensuring no chipping or fading • 2" x 2" Square post
ACCESS CONTROL ACCESSORIES
Standard Pedestals
• Each neck is bent with a 6 in. center radius, giving a tight professional look • Mounting hardware included for all pad mount models • Infinity adapter plate available. See Infinity accessory section for details. SURGE120V
SURGE240V
SURGELV
List Price
$80.00
$80.00
$75.00
Power
120VAC
240VAC
30V
Description
Universal Faceplate Model
PED42
PED42ACC
PED64
PED4272
PED72
List Price
$184.00
$128.00
$184.00
$467.00
$393.00
Height
42 in.
42 in.
64 in.
42 in. & 72 in.
72 in.
Mounting Style
Pad
Pad
In-Ground
Pad
Pad
Material Gauge
11 ga.
14 ga.
11 ga.
11 ga.
11 ga.
Miscellaneous Pedestals
Four-Corner Faceplate
140
Model
Model
GC813
SNAPEDG
List Price
$255.00
$237.00
Height
68 in.
44 in.
Mount Style
In-Ground
Pad
Faceplate Type
None: threaded pipe
Four-corner hole
Post Size
3"x3" square with 1.5" pipe
2" x 2"
Color
Black
Gray
Material Gauge
11 ga.
11 ga.
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
•• Hard wired •• High voltage •• Single phase •• Diagnostics LED
•• Hard wired •• High voltage •• Single phase •• Diagnostics LED
•• Screw terminal •• Low voltage •• 2 pair wire •• Voice/Data/Power
Surge Protection Model
TLSS
LVSS
DTK1FS
R4SS
List Price
$80.00
$80.00
$60.00
$80.00
Description
Surge Protection for Telephone Lines 9000Amp protection
Surge Protection for Power Transformer 12VAC (low voltage)
Wall Mount Surge Protection for Power Transformer 120VAC (high voltage)
Surge Protection for RS485 2000Amp protection
Model
SNATSURGE
SNALSURGE
List Price
$83.00
$61.00
Description
Telephone Line Surge Suppressor (for added protection to the phone line inputs during low-voltage storm surges)
Low-Voltage Surge Suppressor (for added protection to the power inputs during low-voltage storm surges)
141
NOTES
NOTES
142
To place your order or for more information, visit dealer.liftmaster.com or contact your Sales or Customer Care Representative at 800.323.2276.
143
NATIONAL DISTRIBUTION CENTERS Atlanta, GA 505 Best Friend Ct. Suite 560 Norcross, GA 30071
Secaucus, NJ 60 Enterprise Avenue Secaucus, NJ 07094
Chicago, IL 1350 Greenbriar Dr. Suite A Addison, IL 60101
Toronto, ON 395 Pendant Dr. Unit 2 Mississauga, ON L5T 2W9
Tucson, AZ 6050 S. Country Club Rd. Tucson, AZ 85706
REGIONAL DISTRIBUTION CENTERS Los Angeles, CA 14922 S. Figueroa St. Gardena, CA 90248 Dallas/Fort Worth, TX 5325 FAA Boulevard, Suite 180 Irving, Texas 75061
T O P L AC E AN ORDER Online
http://dealer.liftmaster.com
Phone
Customer Care Representative 800.323.2276 Elmhurst, IL
COVERTO BE PROVIDED
Fax
877. 361.9589 Elmhurst, IL
INSTALLATION AND SERVICE INFORMATION 800.528.2806
Chamberlain reserves the right to make design or specification changes without notice. LMGTPB0009
03/11
Printed in U.S.A.
The Chamberlain Group, Inc. 845 Larch Avenue Elmhurst, IL 60126 www.liftmaster.com Chamberlain reserves the right to make design or specification changes without notice. LMGTPB0009
09/11
Printed in U.S.A.
