Transcript
Gateway
L AN
4 net: 1WAN + SIP Ether l: o c o t o r 2F XO P 8-port models: V880 – 8FXS, V808 – 8FXO, V862– 6FXS 4L AN rnet: 1WAN + e h t E P SI l: o c roto XO, V440 – 4F XS P
4-port mode ls: V422 – 2FX
The Smart Choice For Your Business Phone System
S2F XO, V431 – 3F XS1F XO, V404 – 4F
Why install a NetComm SmartVoice Gateway solution?
Netcomm V400/v800 Series SmartVoice Gateway technical specifications
A NetComm SmartVoice Gateway can reduce your telephony costs, without compromising the effectiveness
WAN :
of your phone system. It also has a number of great functions that you might not currently enjoy. For instance, you can: f Make cheaper outgoing calls using Internet telephony to any type of phone including mobiles and overseas f Retain your ability to call to another phone over the local Public Switched Telephone Network (PSTN) f Allow incoming calls to ‘hunt’ for an available extension – commonly called “call hunting” f Automatically dial a number when the handset is lifted (Hotline) f Benefit from Transit in/Transit out Call control f Use a PSTN phone to call the Gateway (transit-in) and pick up a dial tone to call out on your Internet telephony service (transit-out) f Use an Internet telephony phone to call the Gateway (transit-in) and pick up a dial tone to call out on the local PSTN service (transit-out) f Send a fax over the Internet
Port configuration
Voice features
f CNG (Comfort Noise Generation)
f Dual Network Support Proprietary server and protocol enables small businesses to build private SmartVoice network and use standard SIP network at the same time
f VAD (Voice Activity Detection)
f Supplementary call features:**
f One 10/100Mbps auto-negotiation, auto-crossover RJ-45 Ethernet port
400 Series:
f SIP (RFC3261) compatible
f Support static IP, PPPoE, Bigpond Cable and DHCP address assignment and dynamic DNS (DDNS)
• V404 – 0FXS/4FXO, 1WAN, 4LAN • V422 – 2FXS/2FXO, 1WAN, 4LAN
f Voice codecs : G.711 a /µlaw, G.726, G.729A, G.723.1
f QoS: IP TOS (Type of Services) and DiffServ (Differentiated Services) for both SIP signalling and RTP f NAT Traversal : Port Forwarding, STUN, UPnP and Outbound Proxy f NTP: (Network Time Protocol RFC 1305), Accepts up to 3 Time Servers for redundancy f Time Zone Support f MAC Address Clone f RTP Packet Summary : packets sent, packets received, packet loss - for voice quality analysis
LAN : f Four 10/100Mbps auto-negotiation, auto-crossover RJ 45 Ethernet ports f Supports router and bridge mode (NAT mode and Non-NAT mode)
• V431 – 3FXS/1FXO, 1WAN, 4LAN • V440 – 4FXS/0FXO, 1WAN, 4LAN
800 Series: • V808 – 0FXS/8FXO, 1WAN, 4LAN • V862 – 6FXS/2FXO, 1WAN, 4LAN • V880 – 8FXS/0FXO, 1WAN, 4LAN
LED Indicators f 400 Series - Front Panel LED: LAN ports 1~4, WAN, Voice ports 1~4, Alarm, Run, Power f 800 Series – Front Panel LED: Voice ports 1~8, LAN ports 1~4, WAN, WLAN, Alarm, Run, Power
General specifications f Power Adaptor : AC 100V~240V 50/60Hz input, DC 12V output
f Silence suppression/detection
• Call Hold, Call Waiting, Call Pickup
f G.165/G.168 echo cancellation
• Call Forward - Unconditional, Busy, No Answer
f Adjustable Jitter Buffer and programmable Gain Control f Fax Support: T.30 (G.III) / Real time T.38 / Secured T.38 FAX relay f In-Band DTMF, Out-Of-Band DTMF relay (RFC2833, SIP INFO) f Multiple SIP Proxy server entries (same provider) with failover mechanism** f Polarity reversal detection (FXO/ PSTN) and generation (FXS) f DTMF, FSK (Bellcore & ETSI) Caller ID detection and generation.
f Storage: -25 °C ~ 75 °C
Who would use a NetComm SmartVoice Gateway?
Advanced Firewall and Denial of Service (DoS) Protection:
f Humidity : up to 90% RH, non-condensing
f Call control for transit-in/transit-out with self-defined security privileges
Any small to medium business with telephony needs can benefit from a NetComm SmartVoice Gateway solution,
f NAT (Network Address Translation) and PAT (Port Address Translation)
especially if you make a lot of long distance and international calls. Also, if your business runs a call centre or has
f DMZ, Virtual Server & Port Forwarding
branch offices that are far apart, you can make significant savings in inter-office communication.
f Traffic Filtering based on MAC address, IP address, TCP/UDP Port number and URL string pattern f Prevents attacks based on TCP, UDP, IP and ICMP protocols f Prevents attacks such as SYN Flood, IP Spoofing, Ping of Death, Tear Drop, etc.
800 Series: • Dimension (W/D/H) All models: 302 x 179 x 45 mm • Weight All models: 1.2Kg
• Service unavailable • Power loss f Analogue interface • Connector : RJ-11
Configuration & Management:
f 800 Series: module for 802.11x Wireless LAN (for future release)
• Weight All models: 0.43Kg
• Network failure
• Signalling protocol : Loop Start
f Support PSTN-to-VoIP (transit in) / VoIP-to-PSTN (transit out) applications*
400 Series:
f Failover mechanism (FXS relay to FXO/PSTN) :
f FXO hang up detection : Busy Tone cadence auto learning/detection*
f Temperature : Operation 0 °C ~ 45 °C
• Dimension (W/D/H) All models: 202 x 172 x 35 mm
• Three Way Calling (Media Server required)
f Support Caller ID Restriction (CLIR)
f DHCP server
f Make free calls between company offices using peer-to-peer technology
• Call Transfer - Unattended, Attended
f Recordable greeting message for transit-in calls f Digit Map for dialling plan support and call barring f Speed Dial f Local phone book for peer-to-peer calling f E.164 Numbering & ENUM support f Hot-Line, Warm-Line support f Single Number / Account (representative number) for multiple ports f Group Hunting function
f Configuration methods: • Web Browser • IVR • Telnet f Status reports: • Port status • Registration status • Ping tests • STUN/UPnP status • Hardware / software information f Firmware Upgrade through TFTP, FTP and proprietary image server f Configuration Backup/Restore f Reset button (with restore factory default function) f Optional Auto Provisioning Server (APS) for mass deployment f SNMP V1 / V2c (optional)
* Features are only applicable in models which have an FXO port(s) ** The availability of these features may depend on your service provider’s network.
400/800 Series 4-Port/8 Port SmartVoice Gateway
Today’s small-to-medium Business Leadersunderstand that Communication is the Key
The right networking decisions can mean the difference between leading the field, and hanging with the pack. The NetComm SmartVoice suite of products is designed to harness the potential of your business phone system. It comprises simple tools that can give you the edge and deliver significant savings to your call costs using Internet telephony. Most importantly, you won’t have to change your existing phone system to do it. Our products deliver real flexibility, economy, and can easily be connected to a phone or PBX, a key telephone system, fax machine or PSTN line. All you need is a broadband connection, and you can access both data and voice/fax services over IP, to massively reduce the cost of your international and long distance calls. Each model delivers a consistent flow of voice and data traffic. And you never lose voice quality, even when your Internet connection is being heavily used.
You can choose to deploy the 400 & 800 series Gateways in a number of ways: f As a stand-alone central hub for your phone system, in conjunction with an Internet Telephony Service Provider (ITSP) f Within a Private network, using SmartVoice as a communications link between offices f Linked to your existing analogue PBX, and converted into an IP PBX.
Model Configuration
Dual Network – combined ITSP & private network
Call Centre re-location/routing
This is a great option if you want to route phone calls/fax
Make free calls between offices! This application is ideal
Reduce long distance call charges to external phone
If you operate a call centre and want to outsource or re-
calls over the Internet, using broadband. Models with an
for businesses with a number of branches in different
numbers, and gain free inter-office calls through your
locate incoming calls to another office (eg. Head office
FXO port can also connect to the standard PSTN.
cities, and a private SmartVoice network that connects
private network. You can even have the security of PSTN
is in Sydney but Customer Support is in Singapore), this
them. It does not require a third-party ITSP, as calls are
back-up, if required.
solution is for you. In this example, incoming calls are
Calling Features: Enjoy terrific features, like:
still transmitted over the Internet.
f Transit-in/Transit-out call control with greeting message and PIN-code security
Calling Features:
f PSTN back-up when your ITSP/broadband service is down
f FREE SmartVoice peer-to-peer calling between branches
f Call routing through dial plans
f Transit-in/Transit-out call control with greeting message and PIN-code security
f FREE SmartVoice Peer-to-peer calling f Hotline - automatically dials a specific number
f PSTN back-up when broadband service is down
f Warmline – similar to hotline but with a short delay if you want to ring another number
f Call routing through dial plans f Hotline - automatically dials a specific number
f Incoming call ‘hunting’ for available phone
f Warmline – similar to hotline but with a short delay to allow you to ring another number
f Fax over IP – T.38 support
routed over a private SmartVoice network to be answered by phones on the V880.
f Incoming call ‘hunting’ for available phone f Fax over IP – T.38 support f Call forwarding
Used with a PBX – (private branch exchange network) If you have an analogue telephone PBX, you can easily
V400 SmartVoice Series models FXS ports
SmartVoice Gateways in a private network
f Advanced call handling – transfer, hold, forwarding (network dependant)
f As a dual network (combining ITSP and your private network)
Model Number
SmartVoice Gateway as a stand-alone box
add SmartVoice functionality, saving you money and FXO ports
Local Area Network (LAN) Ethernet ports
V404
0
4
4
V422
2
2
4
V431
3
1
4
V440
4
0
4
V800 SmartVoice Series models V808
0
8
4
V862
6
2
4
V880
8
0
4
FXS port – is a port where a telephone handset is connected for making a receiving Internet Telephony and standard PSTN phone calls FXO port – is a “line” port for connecting a PSTN telephone line to provide landline call functions and PSTN backup
building on your existing equipment.
