Transcript
AJEQ12DCE GE® 230/208 Volt Built-In Heat/Cool Room Air Conditioner
Premium, Deluxe and Value Model Wall Case Dimensions (in inches)
Wall Case Dimensions and Installation Information (in inches) Note: When installing slide-out chassis units in through-the-wall applications, keep louvers free. Do not restrict air flow areas.
15-5/8
16-7/8 21-13/16
26 Perpendicular 230/208V 20 Amp
Note: When installing units in through-the-wall applicat Do not restrict air flow areas. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000.
AJCQ12DCD Total volume and shelf area are calculated by the Association of Home Appliance Manufacturers’ standards.
Specification Revised 8/12
Listed by Underwriters Laboratories
390219
AJEQ12DCD Built-in RAC Installation Built-in RAC Installation ® GE 230/208 Volt Built-In Heat and Cool Unit .ub. 1-G003 pg. 138) April 30.1993 1-G003 pg. 138) April 30.1993
Brick Block and Brick Frame Construction
Fill open cells with mortar or insulation
Wall Case Dimensions and Installation Information (in inches)
Installation Information: A finished opening of 26-1/8" x 15-3/4" In Room AirAir Conditioners lt-In Room Conditioners clear of intrusions is required. Keep clearance of 4" from side Opening for RAB36/37/38 walls. Brick veneer or frame wallsCase should have wood studding all Opening for RAB36/37/38 Case
Make frame if desired or caulk Make frame if desired or caulk between case andand siding between case siding
surrounding case to provide firm anchoring with screws. Case hed opening of 26-1/8" x 15-3/4", clear of nished opening of 26-1/8" xbrick 15-3/4", clear of screws sunk can be fastened directly to or block walls with ons, is required. Keep clearance of 4" from usions, is required. Keep clearance of 4" from in lead expansion shields. Brick veneer or frame walls should have ealls. walls. Brick veneer or frame walls should Note: Units should be caulked on all four sides ofhave case to the studding surrounding case to provide firmfirm od studding surrounding case to provide building exterior to assure building integrity. ring with screws. Case cancan be be fastened directly horing with screws. Case fastened directly Two Wall Cases for Tenant Option Installation krick or block walls with screws sunk in lead or When block walls with screws sunk in lead the air conditioner is offered as a tenant option, these sion shields. ansion shields. wall cases provide protection against outside elements. RAB47 – includes wall case, exterior grille and steel closure panels. RAB48 – includes wall case, exterior grille, steel closure panel and two layers of insulation.
Standard Wall Case RAB46 Solid-sided wall case fabricated of galvanized steel with baked enamel finish. Welded areas are coated with a sealing compound to help resist rust and corrosion. Polymer gasket surrounds opening to assure tight weather seal. Aluminum grille (RAG13) is included. Panels on interior and between case and grille provide weather protection prior to installation of chassis. Provide firm anchoring with screws. Case can be fastened directly to brick or block walls with screws sunk in lead expansion shields.
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000.
Plaster Line Trim Molding (if desired)
Lintel
15-3/4 15-3/4 26-1/8 26-1/8
OUTSIDE
16-7/8
INSIDE
Caulking Drip Rail
Frame Construction Frame Construction
Flexible Mounting Position
Lintel Lintel 15-3/4 15-3/4 26-1/8 26-1/8
FillFill open cells open cells with mortar with mortar Brick Block and Brick Brick Block and Brick or insulation or insulation
Frame Construction Frame Construction
Plaster Line Plaster Line Trim Molding Trim Molding (if desired) (if desired)
Lintel Lintel
Total volume and shelf area are calculated by the Association of Home Appliance Manufacturers’ standards.
Specification Revised 8/12
OUTSIDE OUTSIDE
16-7/8 16-7/8
INSIDE INSIDE
Listed by Underwriters Laboratories
390219
AJEQ12DCE GE® 230/208 Volt Built-In Heat/Cool Room Air Conditioner Features and Benefits • GE® 230/208 Volt Built-In Heat/Cool Room Air Conditioner • 11,800/11,600 Cooling BTU • 11,200/9,200 Resistance heat BTU • 3470/2850 Watts heat • 9.4/9.4 EER • 230/208 Volts • R-410A refrigerant • Electronic Controls with Remote • Electronic Digital Thermostat • Four-Way Air Direction • Up-front, Washable Air Filter • 2 Cooling / 2 Heating / 2 Fan Only Speeds
AJEQ12DCD
• Unit dimensions: 14-7/8"W x 24-13/16"H x 19-29/32"D • Model AJEQ12DCE – Soft Gray
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000. Total volume and shelf area are calculated by the Association of Home Appliance Manufacturers’ standards.
Specification Revised 8/12
Listed by Underwriters Laboratories
390219
