Transcript
Coherent
CO 2 Laser
RF-Excited, Waveguide
GEM-100L Liquid-Cooled RF-Excited OEM Industrial CO2 Laser A Diamond™ Family Laser
The GEM-100L Advantage
FEATURES
The RF-excited GEM™-100L OEM/Industrial Laser brings exceptional beam quality and superior amplitude stability to the OEM/Industrial user in a super-compact package. In harsh environments where there are high dust and particulate levels, liquid cooling offers stable, robust operation.
• Outstanding beam quality and stability
The GEM-100L features an efficient folded-resonator design contained within an all-metal housing. It’s a structural approach that gives the GEM-100L its outstanding beam quality and stability. Metal seals assure both long operational and shelf lifetimes. It is a robust and field-proven product.
• Highly compact and lightweight, two-piece package • All-metal seals for long life
The RF power supply is connected to the laser head by an industrial-quality, triple-shielded RF cable. Custom lengths are available upon request. All laser heads, RF supplies and cables are interchangeable.
• Low-cost OEM configuration
All control and monitoring signals are accessed through a 15-pin D-connector located on the front panel of the RF supply.
• Interchangeable laser heads and RF supplies
The superior performance of the GEM-100L laser is demonstrated in the high output per unit volume obtained with patent-protected technology.
• Linear polarization • Wide operating power range • Fast rise/fall time • Up to 100% duty cycle operation
GEM-100L
Liquid-Cooled RF-Excited OEM Industrial CO2 Laser
Beam Exit Aperture
Laser Head 20.6 mm (0.81 in.)
Type N RF Connector 25.4 mm (1.00 in.)
100.8 mm (3.97 in.)
119.4 mm (4.70 in.)
75.4 mm (2.97 in.)
591.9 mm (23.30 in.)
19.6 mm (0.77 in.)
Optional Cooling Fittings Available
457.2 mm (18.00 in.)
47.0 mm (1.85 in.)
RF Power Supply
87.3 mm (3.438 in.)
228.6 mm (9.00 in.)
104.6 mm (4.12 in.)
N Type RF Connector 83.8 mm 10.0 mm (3.30 in.) (0.393 in.) 30.7 mm (1.21 in.)
54.0 mm (2.125 in.)
1/4 NPT Coolant
181.1 mm (7.13 in.) 6X #8-32 Both Sides
279.4mm (11.0 in.) 69.85 mm (2.75 in.)
69.85 mm (2.75 in.)
69.85 mm (2.75 in.)
69.85 mm (2.75 in.)
19.1 mm (0.75 in.)
69.09 mm (2.72 in.)
31.8 mm (1.25 in.)
48 VDC 4 Lug Terminal Block
83.8 mm (3.30 in.) 19.1 mm (0.75 in.)
GEM-100L System Specifications
Wavelength Output Power1 Power Stability2 Mode Quality Beam Size Beam Divergence Polarization Pulse Frequency Weight of Head Weight of Power Supply Dimensions
10.6 µm fixed 100W <±3% M2 <1.3 3.8 ±0.4 mm <5.0 mrad full angle >100 to 1 (fixed linear) TTL up to 25 kHz 10.7 kg (23.5 lbs.) 12.1 kg (26.6 lbs.) Shown above
Facility Requirements
Input Power
48 VDC 50A (70A peak for a period of 1 msec minimum) +/-2% regulation with remote sense
Cooling Heat Load Flow Rate Temperature Coolant Environmental Temperature Altitude Humidity
2300W (max.) >2 gpm 15 to 30°C (59 to 113°F) Water +25% Dow Frost* Coolant 15 to 45°C (59 to 113°F) <2000 m (6500 ft.) Non-condensing
1
Derate power by 1% / °C for laser head temperatures above 25°C. Power stability measured at constant duty cycle after 10-minute warm-up. Specifications are subject to change without notice. Protected under U.S. patents: 4,787,090; 4,577,323; 4,443,877; 4,438,514 and 4,393,126 with others pending. Licensed by PATLEX Corp. under U.S. Patent 4,704,583. * Dow Frost is a trademark of the Dow Chemical Company. 2
Coherent, Inc. guarantees that the output power of the GEM-100L will exceed the rated power for a period of one year, independent of the actual operating time. Coherent, Inc. also warrants to the original purchaser for a period of one year from the date of delivery C O H E R E N T, I N C .
that the GEM-100L is free from defects in material and workmanship. The warranty does
5100 Patrick Henry Drive
not apply to any unit damaged by accident, abuse or operation in a manner inconsistent
Santa Clara, CA 95054 phone (800) 527-3786
Japan
+81 (3) 5635 8700
with the procedures and specifications outlined in the manual supplied with the laser.
(408) 764-4983
Benelux +31 (30) 280 6060
The GEM-100L is a laser component that does not include all safety features as required
(800) 362-1170
France
by the FDA and the Center for Devices and Radiological Health (CDRH). It is sold solely to
(408) 988-6838
Germany +49 (6071) 9680
qualified manufacturers who in their end product will supply all interlocks and indica-
e-mail
[email protected]
Italy
+39 (02) 34 530 214
tors, and will comply fully with CDRH regulations and/or local regulatory agencies.
web
UK
+44 (1353) 658 833
fax
www.Coherent.com
+33 (0)1 6985 5145
VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IV LASER RADIATION PRODUCT PER EN60825-1 (1994)
Printed in the U.S.A. MC-104-02-2.5M0905Rev.E Copyright © 2005 Coherent, Inc.
CO 2 LASER 9.2 - 10.8 MICRONS 175 WATT CW
Coherent
CO 2 Laser
RF-Excited, Waveguide
GEM-30L Liquid-Cooled RF-Excited OEM Industrial CO2 Laser A Diamond™ Family Laser
The GEM-30L Advantage
FEATURES
The GEM™-30L OEM Industrial Laser delivers outstanding beam quality and amplitude stability in a compact package. Ruggedized for the most severe industrial environments, it is the standard of the industry.
• Ultra compact
The GEM-30L is the single-box iteration of a high-performance RF power supply and an efficient folded resonator design. The result is a uniquely compact and versatile OEM package. It’s a structural approach that gives the GEM-30L its outstanding beam quality and stability. Metal seals assure both long operational and shelf lifetimes. It is a robust and field-proven product. The all-solid-state RF power supply can be operated either CW or in a modulated mode, allowing the user a wide range of process control. The RF power supply is integrated with the laser head. All control and monitoring signals are accessed through an 8-pin RJ-45 connector located on the laser. The GEM-30L offers many distinctive advantages. It is cost-effective, simple to use, and has low service requirements. Available in both air-cooled and water-cooled versions, GEM-30 lasers offer straightforward installation. The superior performance of the GEM-30 laser is demonstrated in the high output per unit volume obtained with patent-protected technology.
• Outstanding beam quality and stability • Single, integrated package • CW or modulated up to 25 kHz • All-metal seals for long life • Low-cost OEM configuration • Linear polarization • Wide operating power range • Fast rise/fall time • Up to 100% duty cycle operation
GEM-30L Laser Head
Liquid-Cooled RF-Excited OEM Industrial CO2 Laser
92.46 mm (3.640 in.)
Control Connector RJ45 DC Input
26.67 mm (1.05 in.) Beam Out
92.79 mm (3.653 in.) 29.08 mm (1.145 in.)
79.25 mm (3.120 in.)
11.36 mm (0.447 in.)
357.0 mm (14.06 in.)
1/4" Cu Coolant Tubes
GEM-30L System Specifications
Wavelength Output Power1 Power Stability2 Mode Quality Beam Size Beam Divergence Polarization Pulse Frequency Weight Dimensions
10.55 to 10.63 µm 30W ±5% >98% TEM00, M2 <1.2 1.8 ±0.2 mm 7.5 ±0.5 mrad full angle >100 to 1 (fixed linear) Up to 25 kHz 5.4 kg (12.0 lbs.) Shown above
Facility Requirements
Input Power
48 VDC 12A (18A peak for a minimum of 1 msec) ±2% regulation. Remote sense recommended.
Cooling Heat Load Flow Rate Temperature Coolant Environmental Temperature Altitude Humidity
550W (max.) >1.0 gpm 15 to 30°C Water +25% Dow Frost* Coolant 5 to 40°C 2000 m (<6500 ft.) Non-condensing
1
Derate power by 1% / °C for laser head temperatures above 25°C. Power stability measured at constant duty cycle after 10-minute warm-up. Specifications are subject to change without notice. Protected under U.S. patents: 4,787,090; 4,577,323; 4,443,877; 4,438,514 and 4,393,126 with others pending. Licensed by PATLEX Corp. under U.S. Patent 4,704,583. * Dow Frost is a trademark of the Dow Chemical Company. 2
Coherent, Inc. guarantees that the output power of the GEM-30L will exceed the rated power for a period of one year, independent of the actual operating time. Coherent, Inc. also warrants to the original purchaser for a period of one year from the date of delivery C O H E R E N T, I N C .
that the GEM-30L is free from defects in material and workmanship. The warranty does
5100 Patrick Henry Drive
not apply to any unit damaged by accident, abuse or operation in a manner inconsistent
Santa Clara, CA 95054 phone (800) 527-3786
Japan
+81 (3) 5635 8700
with the procedures and specifications outlined in the manual supplied with the laser.
(408) 764-4983
Benelux +31 (30) 280 6060
The GEM-30L is a laser component that does not include all safety features as required
(800) 362-1170
France
by the FDA and the Center for Devices and Radiological Health (CDRH). It is sold solely to
(408) 988-6838
Germany +49 (6071) 9680
qualified manufacturers who in their end product will supply all interlocks and indica-
e-mail
[email protected]
Italy
+39 (02) 34 530 214
tors, and will comply fully with CDRH regulations and/or local regulatory agencies.
web
UK
+44 (1353) 658 833
fax
www.Coherent.com
+33 (1) 6985 5145
VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IV LASER RADIATION PRODUCT PER EN60825-1 (1994)
Printed in the U.S.A. MC-081-02-2.5M0505Rev.B Copyright © 2005 Coherent, Inc.
CO 2 LASER 9.2 - 10.8 MICRONS 50 WATT CW
Coherent
CO 2 Laser
RF-Excited, Waveguide
GEM-40A Air-Cooled RF-Excited OEM Industrial CO2 Laser A Diamond™ Family Laser
The GEM-40A Advantage
FEATURES
The GEM™-40A OEM Industrial Laser delivers exceptional beam quality and superior amplitude stability in a compact package. Ruggedized for the most severe industrial environments, it is the standard of the industry.
• Ultra-compact
The GEM-40A is the single-box integration of a high-performance RF power supply and an efficient, folded-resonator design. This laser includes an integral beam circularizer for symmetrical beam performance. The result is a uniquely compact and versatile OEM package. This design delivers a new standard of price/performance in an OEM package. It’s a structural approach that gives the GEM-40A its outstanding beam quality and stability. Metal seals assure both long operational and shelf lifetimes. The GEM-40A is a robust and field-proven product. The all-solid-state RF power supply can be operated either CW or in a modulated mode, allowing the user a wide range of process control. The RF power supply is integrated with the laser head. All control and monitoring signals are accessed through an 8-pin RJ-45 connector located on the laser. The GEM-40A offers many distinctive advantages. It is cost-effective, simple to use, and has low service requirements. Available in both air-cooled and water-cooled versions, GEM-40 lasers also offer straightforward installation. The overall superior performance of the GEM-40A laser is demonstrated in the high output per unit volume obtained with its patent-protected technology.
• Circular beam • Excellent stability • Single, integrated package • Cost-saving and simple, direct-air-cooling • Linear polarization • Low-cost OEM configuration • Fast rise/fall time • 0 to 100% duty cycle operation • All-metal seals for long life
GEM-40A Laser Head
Air-Cooled RF-Excited OEM Industrial CO2 Laser
Control Connector RJ45 DC Input
312.04 mm (12.285 in.)
30.51 mm (1.201 in.)
12.50 mm (0.492 in.)
296.00 mm (11.654 in.)
79.25 mm (3.120 in.)
32.0 mm (1.26 in.)
6.10 mm (0.240 in.)
6.10 mm (0.240 in.)
12.50 mm (0.492 in.)
Beam Out 40.00 mm (1.575 in.) 19.56 mm (0.770 in.) 139.7 mm (5.50 in.)
6.60 mm (0.260 in.)
20.00 mm (0.787 in.)
6.60 mm (0.260 in.)
56.4 mm (2.22 in.)
7.95 mm (0.313 in.)
75.9 mm (2.99 in.)
325.86 mm (12.829 in.)
83.7 mm (3.295 in.)
27.18 mm (1.070 in.) 30.0 mm (1.18 in.) Max.
395.0 mm (15.55 in.)
10X M4 11.4 mm (0.45 in.) Both Sides
92.46 mm (3.640 in.) 43.2 mm (1.70 in.)
GEM-40A System Specifications
Facility Requirements
Wavelength
10.1 to 10.3 µm
Output Power1
40W
Power Stability2 Mode Quality
±5% M2 <1.3
Beam Size
3.6 ±0.5 mm beam size
Beam Divergence
<5 mrad full angle
Polarization
>100:1 (fixed linear)
Pulse Frequency
Up to 25 kHz
Weight
13.5 lbs. (6.0 kg)
Dimensions
Shown above
Input Power
48 VDC, 14A (20A peak for a min. of 1 msec) ±2% regulation. Remote sense recommended.
Surface Cooling Requirements Heat Load
Heat Dissipation 550W
Environmental Temperature Altitude Humidity
5 to 40°C <6500 ft. (2000 m) Non-condensing
1 2
Maximum Case Temperature 65°C
Derate power by 1% / °C for laser head temperatures above 25°C. Power stability measured at constant duty cycle after 10-minute warm-up. Specifications are subject to change without notice. Protected under U.S. patents: 4,787,090; 4,577,323; 4,443,877; 4,438,514 and 4,393,126 with others pending. Licensed by PATLEX Corp. under U.S. Patent 4,704,583.
Coherent, Inc. guarantees that the output power of the GEM-40A will exceed the rated power for a period of one year, independent of the actual operating time. Coherent, Inc. also warrants to the original purchaser for a period of one year from the date of delivery C O H E R E N T, I N C .
that the GEM-40A is free from defects in material and workmanship. The warranty does
5100 Patrick Henry Drive
not apply to any unit damaged by accident, abuse or operation in a manner inconsistent
Santa Clara, CA 95054 phone (800) 527-3786
Japan
+81 (3) 5635 8700
with the procedures and specifications outlined in the manual supplied with the laser.
(408) 764-4983
Benelux +31 (30) 280 6060
The GEM-40A is a laser component that does not include all safety features as required
(800) 362-1170
France
by the FDA and the Center for Devices and Radiological Health (CDRH). It is sold solely to
(408) 988-6838
Germany +49 (6071) 9680
qualified manufacturers who in their end product will supply all interlocks and indica-
e-mail
[email protected]
Italy
+39 (02) 34 530 214
tors, and will comply fully with CDRH regulations and/or local regulatory agencies.
web
UK
+44 (1353) 658 833
fax
www.Coherent.com
+33 (1) 6985 5145
VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IV LASER RADIATION PRODUCT PER EN60825-1 (1994)
Printed in the U.S.A. MC-179-04-2.5M0505Rev.A Copyright © 2005 Coherent, Inc.
CO 2 LASER 9.2 - 10.8 MICRONS 50 WATT CW
Coherent
CO 2 Laser
RF-Excited, Waveguide
GEM-40L Liquid-Cooled RF-Excited OEM Industrial CO2 Laser A Diamond™ Family Laser
The GEM-40L Advantage
FEATURES
The GEM™-40L OEM Industrial Laser delivers exceptional beam quality and superior amplitude stability in a compact package. Ruggedized for the most severe industrial environments, it is the standard of the industry.
• Ultra-compact
The GEM-40L is the single-box integration of a high-performance RF power supply and an efficient, folded-resonator design. This laser includes an integral beam circularizer for symmetrical beam performance. The result is a uniquely compact and versatile OEM package. This design delivers a new standard of price/performance in an OEM package. It’s a structural approach that gives the GEM-40L its outstanding beam quality and stability. Metal seals assure both long operational and shelf lifetimes. The GEM-40L is a robust and field-proven product. The all-solid-state RF power supply can be operated either CW or in a modulated mode, allowing the user a wide range of process control. The RF power supply is integrated with the laser head. All control and monitoring signals are accessed through an 8-pin RJ-45 connector located on the laser. The GEM-40L offers many distinctive advantages. It is cost-effective, simple to use, and has low service requirements. Available in both air-cooled and water-cooled versions, GEM-40 lasers also offer straightforward installation. The overall superior performance of the GEM-40 laser is demonstrated in the high output per unit volume obtained with patent-protected technology.
• Circular beam • Outstanding stability • Single, integrated package • CW or modulated up to 25 kHz • All-metal seals for long life • Low-cost OEM configuration • Linear polarization • Wide operating power range • Fast rise/fall time • Up to 100% duty cycle operation
GEM-40L Laser Head
Liquid-Cooled RF-Excited OEM Industrial CO2 Laser
Control Connector RJ45 DC Input
22.48 mm (0.885 in.)
312.04 mm (12.285 in.) 12.50 mm (0.492 in.)
296.01 mm (11.654 in.)
12.50 mm (0.492 in.)
6.10 mm (0.240 in.)
10X M4 11.4 mm (0.45 in.) Both Sides
6.10 mm (0.240 in.)
40.00 mm (1.575 in.) 20.00 mm (0.787 in.)
92.96 mm (3.66 in.) (
79.25 mm (3.120 in.)
19.56 mm (0.770 in.)
)
6.60 mm (0.260 in.)
6.60 mm (0.260 in.)
8.20 mm (0.323 in.)
9.53 mm (0.375 in.)
378.50 mm (14.90 in.)
27.18 mm (1.070 in.)
Beam Out 92.46 mm (3.640 in.)
Coolant In/Out
29.21 mm (1.15 in.)
2X ø6.35 mm (ø0.250 in.)
43.2 mm (1.70 in.) 37.6 mm (1.48 in.)
395.0 mm (15.55 in.)
30.0 mm (1.18 in.) Max.
GEM-40L System Specifications
Facility Requirements
Wavelength
10.1 to 10.3 µm
Output Power1
40W
Power Stability2 Mode Quality
±5% M2 <1.3
Beam Size
3.6 ±0.5 mm beam size
Beam Divergence
<5 mrad full angle
Polarization
>100 to 1 (fixed linear)
Pulse Frequency
Up to 25 kHz
Weight
12.0 lbs. (5.4 kg)
Dimensions
Shown above
Input Power
48 VDC, 14A (20A peak for a min. of 1 msec) ±2% regulation. Remote sense recommended.
Cooling Heat Load Flow Rate Temperature Coolant
550W (max.) >1.0 gpm 15 to 30°C Water +25% Dow Frost* Coolant
Environmental Temperature Altitude Humidity
5 to 40°C <6500 ft. (2000 m) Non-condensing
1
Derate power by 1% / °C for laser head temperatures above 25°C. Power stability measured at constant duty cycle after 10-minute warm-up. Specifications are subject to change without notice. Protected under U.S. patents: 4,787,090; 4,577,323; 4,443,877; 4,438,514 and 4,393,126 with others pending. Licensed by PATLEX Corp. under U.S. Patent 4,704,583. * Dow Frost is a trademark of the Dow Chemical Company. 2
Coherent, Inc. guarantees that the output power of the GEM-40L will exceed the rated power for a period of one year, independent of the actual operating time. Coherent, Inc. also warrants to the original purchaser for a period of one year from the date of delivery C O H E R E N T, I N C .
that the GEM-40L is free from defects in material and workmanship. The warranty does
5100 Patrick Henry Drive
not apply to any unit damaged by accident, abuse or operation in a manner inconsistent
Santa Clara, CA 95054 phone (800) 527-3786
Japan
+81 (3) 5635 8700
with the procedures and specifications outlined in the manual supplied with the laser.
(408) 764-4983
Benelux +31 (30) 280 6060
The GEM-40L is a laser component that does not include all safety features as required
(800) 362-1170
France
by the FDA and the Center for Devices and Radiological Health (CDRH). It is sold solely to
(408) 988-6838
Germany +49 (6071) 9680
qualified manufacturers who in their end product will supply all interlocks and indica-
e-mail
[email protected]
Italy
+39 (02) 34 530 214
tors, and will comply fully with CDRH regulations and/or local regulatory agencies.
web
UK
+44 (1353) 658 833
fax
www.Coherent.com
+33 (1) 6985 5145
VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IV LASER RADIATION PRODUCT PER EN60825-1 (1994)
Printed in the U.S.A. MC-180-04-2.5M0505Rev.A Copyright © 2005 Coherent, Inc.
CO 2 LASER 9.2 - 10.8 MICRONS 50 WATT CW
Coherent
CO 2 Laser
Air-Cooled, RF-Excited
GEM-50A Air-Cooled RF-Excited OEM Industrial CO2 Laser A Diamond™ Family Laser
The GEM-50A Advantage The RF-excited GEM™-50A OEM Industrial Laser delivers exceptional beam quality and superior amplitude stability in a compact package. It provides a low-cost solution to high operating costs by eliminating the need for liquid cooling — saving thousands of dollars in cooling equipment while improving reliability. Ruggedized for the most severe industrial environments, it is the standard of the industry. The GEM-50A features an efficient folded-resonator design contained within an all-metal housing. It’s a structural approach that gives the GEM-50A its outstanding beam quality and stability. Metal seals assure both long operational and shelf lifetimes. The GEM-50A is a robust and field-proven product. The all-solid-state RF power supply can be operated either CW or in a modulated mode, allowing the user a wide range of process control. The RF power supply is connected to the laser head by an industrial-quality, triple-shielded RF cable. Custom lengths are available upon request. All laser heads, RF supplies and cables are interchangeable. All control and monitoring signals are accessed through a 15-pin D-connector located on the front panel of the RF supply. The GEM-50A offers many distinctive advantages. It is cost-effective, simple to use, and has low service requirements. Offered in both air-cooled and water-cooled versions, GEM-50 lasers offer straightforward installation. The superior performance of the GEM-50A laser is demonstrated in the high output per unit volume obtained with patent-protected technology.
FEATURES • Excellent stability and beam quality • Cost-saving and simple, direct-air cooling • Linear polarization • Highly compact and lightweight, two-piece package • Low-cost OEM configuration • Fast rise/fall time • Up to 100% duty cycle operation • All-metal seals for long life • Wide operating power range • Interchangeable laser heads and RF power supplies
GEM-50A Laser Head
Air-Cooled RF-Excited OEM Industrial CO2 Laser
79.2 mm (3.12 in.)
Type N RF Connector
537.2 mm (21.15 in.) 30.5 mm (1.20 in.) 19.4 mm (0.76 in.)
164.1 mm (6.46 in.)
20.6 mm (0.81 in.)
48 VDC Input Fan Voltage
488.3 mm (19.22 in.)
83.7 mm (3.29 in.)
311.4 mm (12.26 in.)
RF Power Supply 15-Pin D-Connector 4–Lug 48 VDC Input Terminal Strip 228.6 mm (9.00 in.)
Type N RF Connector 149.4 mm (5.88 in.)
GEM-50A System Specifications
Wavelength Output Power1 Power Stability2 Mode Quality Beam Size Beam Divergence Polarization Pulse Frequency Weight of Head Weight of Power Supply Dimensions
10.6 µm fixed 50W ±5% >98% TEM00, M2 <1.2 1.8 ±0.2 mm 7.5 ±0.5 mrad full angle >100 to 1 (fixed linear) Up to 25 kHz 7.3 kg (16.0 lbs.) 3.9 kg (8.5 lbs.) Shown above
Facility Requirements
Input Power
48 VDC 25A (36A peak for a minimum of 1 msec) ±2% regulation with remote sense. Heat Dissipation Maximum Case Temperature 650W 60°C (140°F) 350W 60°C (140°F)
Surface Cooling Requirements Laser Head RF Power Supply Environmental3 Temperature Altitude Humidity
5 to 40°C (41 to 104°F) <2000 m (6500 ft.) Non-condensing
1
Derate power by 1% / °C for laser head temperatures above 25°C. Power stability measured at constant duty cycle after 10-minute warm-up. 3 Adverse environmental conditions (high ambient temperatures, humidity or altitude) will limit the maximum allowable duty cycle. Systems designers must limit the duty cycle so that hardware surface temperature limits are not exceeded. 2
Specifications are subject to change without notice. Protected under U.S. patents: 4,787,090; 4,577,323; 4,443,877; 4,438,514 and 4,393,126 with others pending. Licensed by PATLEX Corp. under U.S. Patent 4,704,583.
Coherent, Inc. guarantees that the output power of the GEM-50A will exceed the rated power for a period of one year, independent of the actual operating time. Coherent, Inc. also warrants to the original purchaser for a period of one year from the date of delivery C O H E R E N T, I N C .
that the GEM-50A is free from defects in material and workmanship. The warranty does
5100 Patrick Henry Drive
not apply to any unit damaged by accident, abuse or operation in a manner inconsistent
Santa Clara, CA 95054 phone (800) 527-3786
Japan
+81 (3) 5635 8700
with the procedures and specifications outlined in the manual supplied with the laser.
(408) 764-4983
Benelux +31 (30) 280 6060
The GEM-50A is a laser component that does not include all safety features as required
(800) 362-1170
France
by the FDA and the Center for Devices and Radiological Health (CDRH). It is sold solely to
(408) 988-6838
Germany +49 (6071) 9680
qualified manufacturers who in their end product will supply all interlocks and indica-
e-mail
[email protected]
Italy
+39 (02) 34 530 214
tors, and will comply fully with CDRH regulations and/or local regulatory agencies.
web
UK
+44 (1353) 658 833
fax
www.Coherent.com
+33 (1) 6985 5145
VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IV LASER RADIATION PRODUCT PER EN60825-1 (1994)
Printed in the U.S.A. MC-099-01-2.5M0505Rev.D Copyright © 2005 Coherent, Inc.
CO 2 LASER 9.2 - 10.8 MICRONS 100 WATT CW
Coherent
CO 2 Laser
RF-Excited, Waveguide
GEM-50L Liquid-Cooled RF-Excited OEM Industrial CO2 Laser A Diamond™ Family Laser
The GEM-50L Advantage
FEATURES
The RF-excited GEM™-50L OEM/Industrial Laser brings exceptional beam quality and superior amplitude stability to the OEM/industrial user in a super-compact package. In harsh environments where there are high dust and particulate levels, liquid cooling offers stable, robust operation.
• Outstanding beam quality and stability
The GEM-50L features an efficient folded-resonator design contained within an all-metal housing. It’s a structural approach that gives the GEM-50L its outstanding beam quality and stability. Metal seals assure both long operational and shelf lifetimes. It is a robust and field-proven product. The all-solid-state RF power supply can be operated either CW or in a pulse-modulated mode, allowing the user a wide range of control over pulse power and pulse duration for process control. The RF power supply also includes an integrated DC supply. This feature allows the GEM-50L to operate from AC line voltages between 200 and 240 VAC. The RF power supply is connected to the laser head by an industrial-quality, triple-shielded RF cable. Custom lengths are available upon request. All laser heads, RF supplies and cables are interchangeable. All control and monitoring signals are accessed through a 15-pin D-connector located on the front panel of the RF supply. The superior performance of the GEM-50L laser is demonstrated in the high output per unit volume obtained with patent-protected technology.
• Highly compact and lightweight, two-piece package • Integrated DC/RF supply – included! • CW or pulse-modulated operation – to 25 kHz • All-metal seals for long life • Low-cost OEM configuration • Interchangeable laser heads and RF supplies • Linear polarization • Wide operating power range • Fast rise/fall time • Up to 100% duty cycle operation
GEM-50L
Liquid-Cooled RF-Excited OEM Industrial CO2 Laser
537.2 mm (21.15 in.)
Laser Head
N Type RF Connector
152.4 mm (6.00 in.)
30.5 mm (1.20 in.) 103.7 mm (4.08 in.)
65.9 mm (2.59 in.)
36.7 mm (1.44 in.) 1/4 NPT 79.2 mm (3.12 in.)
20.6 mm (0.81 in.)
Cooling Options: Coolant Fittings or Optional ø 0.25 Copper Tube 127.0 mm (5.00 in.)
308.1 mm (12.13 in.)
N Type RF Connector
15-Pin D-Connector
Power Supply
228.6 mm (9.00 in.)
AC Input Connector
1/4 NPT Coolant
339.9 mm (13.38 in.)
GEM-50L System Specifications
Wavelength Output Power1 Power Stability2 Mode Quality Beam Size Beam Divergence Polarization Pulse Frequency Weight of Head Weight of Power Supply Dimensions
10.6 µm Fixed 50W ±3% >98% TEM00, M2 <1.2 1.8 ±0.2 mm 7.5 ±0.5 mrad full angle >100 to 1 (fixed linear) TTL up to 25 kHz 6.6 kg (14.5 lbs.) 7.3 kg (16.2 lbs.) Shown above
Facility Requirements
Input Power Cooling Heat Load Flow Rate Temperature Coolant Environmental Temperature Altitude Humidity
200 to 240 VAC, 50 to 60 Hz, 7A 1300W (max.) >1.5 gpm 15 to 30°C (59 to 86°F) Water +25% Dow Frost* Coolant 5 to 45°C (41 to 113°F) <2000 m (6500 ft.) Non-condensing
1
Derate power by 1% / °C for laser head temperatures above 25°C. Power stability measured at constant duty cycle after 10-minute warm-up. Specifications are subject to change without notice. Protected under U.S. patents: 4,787,090; 4,577,323; 4,443,877; 4,438,514 and 4,393,126 with others pending. Licensed by PATLEX Corp. under U.S. Patent 4,704,583. * Dow Frost is a trademark of the Dow Chemical Company. 2
Coherent, Inc. guarantees that the output power of the GEM-50L will exceed the rated power for a period of one year, independent of the actual operating time. Coherent, Inc. also warrants to the original purchaser for a period of one year from the date of delivery C O H E R E N T, I N C .
that the GEM-50L is free from defects in material and workmanship. The warranty does
5100 Patrick Henry Drive
not apply to any unit damaged by accident, abuse or operation in a manner inconsistent
Santa Clara, CA 95054 phone (800) 527-3786
Japan
+81 (3) 5635 8700
with the procedures and specifications outlined in the manual supplied with the laser.
(408) 764-4983
Benelux +31 (30) 280 6060
The GEM-50L is a laser component that does not include all safety features as required
(800) 362-1170
France
by the FDA and the Center for Devices and Radiological Health (CDRH). It is sold solely to
(408) 988-6838
Germany +49 (6071) 9680
qualified manufacturers who in their end product will supply all interlocks and indica-
e-mail
[email protected]
Italy
+39 (02) 34 530 214
tors, and will comply fully with CDRH regulations and/or local regulatory agencies.
web
UK
+44 (1353) 658 833
fax
www.Coherent.com
+33 (1) 6985 5145
VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IV LASER RADIATION PRODUCT PER EN60825-1 (1994)
Printed in the U.S.A. MC-100-02-2.5M0505Rev.D Copyright © 2005 Coherent, Inc.
CO 2 LASER 9.2 - 10.8 MICRONS 100 WATT CW
Coherent
CO 2 Laser
RF-Excited, Waveguide
GEM-60L Liquid-Cooled RF-Excited OEM Industrial CO2 Laser A Diamond™ Family Laser
The GEM-60L Advantage
FEATURES
The RF-excited GEM™-60L OEM/Industrial Laser brings exceptional beam quality and superior amplitude stability to the OEM/Industrial user in a super-compact package. In harsh environments where there are high dust and particulate levels, liquid cooling offers stable, robust operation.
• Outstanding beam quality and stability
The GEM-60L features an efficient folded-resonator design contained within an all-metal housing. It’s a structural approach that gives the GEM-60L its outstanding beam quality and stability. Metal seals assure both long operational and shelf lifetimes. It is a robust and field-proven product. The all-solid-state RF power supply can be operated either CW or in a “Brilliance” mode, allowing the user a wide range of control over pulse power and pulse duration for process control. The power supply also includes an integrated DC supply. This feature allows the GEM-60L to operate from AC line voltages between 200 and 240 VAC. The RF power supply is connected to the laser head by an industrial-quality, triple-shielded RF cable. Custom lengths are available upon request. All laser heads, RF supplies and cables are interchangeable.
• Highly compact and lightweight, two-piece package • Integrated DC/RF supply – included! • CW or enhanced pulsed “Brilliance” mode operation – to 25 kHz • All-metal seals for long life
All control and monitoring signals are accessed through a 15-pin D-connector located on the front panel of the RF supply.
• Low-cost OEM configuration
The superior performance of the GEM-60L laser is demonstrated in the high output per unit volume obtained with patent-protected technology.
• Interchangeable components • Fixed linear polarization • Wide operating power range • Fast rise/fall time • Up to 100% duty cycle operation
GEM-60L
Liquid-Cooled RF-Excited OEM Industrial CO2 Laser
579.25 mm (22.80 in.)
Laser Head
537.2 mm (21.15 in.) 12X M3 THD Both Sides
30.5 mm (1.20 in.)
25.4 mm (1.00 in.) Laser Exit
Type N RF Connector 140.2 mm (5.51 in.) 65.9 mm (2.59 in.)
Optional Coolant Fittings Available 308.1 mm (12.13 in.)
Power Supply
127.0 mm (5.00 in.) N Type RF Connector
15-Pin D-Connector
228.6 mm (9.00 in.)
AC Input Connector
1/4 NPT Coolant
339.9 mm (13.38 in.)
GEM-60L System Specifications
Wavelength Output Power1 Power Stability2 Mode Quality Beam Size Beam Divergence Polarization Pulse Frequency Weight of Head Weight of Power Supply Dimensions
10.6 µm fixed 60W ±3% >95% TEM00, M2 <1.3 3.8 ±0.4 mm typical <5.0 mrad typical >100 to 1 (fixed linear) Up to 25 kHz 6.6 kg (14.5 lbs.) 7.3 kg (16.2 lbs.) Shown above
Facility Requirements
Input Power Cooling Heat Load Flow Rate Temperature Coolant Environmental Temperature Altitude Humidity
200 to 240 VAC, 50 to 60 Hz, 7A 1300W (max.) >1.5 gpm 15 to 30°C (59 to 86°C) Water +25% Dow Frost Coolant 5 to 45°C (41 to 113°F) <2000 m (6500 ft.) Non-condensing
1
Derate power by 1% / °C for laser head temperatures above 25°C. Power stability measured at constant duty cycle after 10-minute warm-up. Specifications are subject to change without notice. Protected under U.S. patents: 4,787,090; 4,577,323; 4,443,877; 4,438,514 and 4,393,126 with others pending. Licensed by PATLEX Corp. under U.S. Patent 4,704,583. * Dow Frost is a trademark of the Dow Chemical Company. 2
Coherent, Inc. guarantees that the output power of the GEM-60L will exceed the rated power for a period of one year, independent of the actual operating time. Coherent, Inc. also warrants to the original purchaser for a period of one year from the date of delivery C O H E R E N T, I N C .
that the GEM-60L is free from defects in material and workmanship. The warranty does
5100 Patrick Henry Drive
not apply to any unit damaged by accident, abuse or operation in a manner inconsistent
Santa Clara, CA 95054 phone (800) 527-3786
Japan
+81 (3) 5635 8700
with the procedures and specifications outlined in the manual supplied with the laser.
(408) 764-4983
Benelux +31 (30) 280 6060
The GEM-60L is a laser component that does not include all safety features as required
(800) 362-1170
France
by the FDA and the Center for Devices and Radiological Health (CDRH). It is sold solely to
(408) 988-6838
Germany +49 (6071) 9680
qualified manufacturers who in their end product will supply all interlocks and indica-
e-mail
[email protected]
Italy
+39 (02) 34 530 214
tors, and will comply fully with CDRH regulations and/or local regulatory agencies.
web
UK
+44 (1353) 658 833
fax
www.Coherent.com
+33 (1) 6985 5145
VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IV LASER RADIATION PRODUCT PER EN60825-1 (1994)
Printed in the U.S.A. MC-102-02-2.5M0505Rev.D Copyright © 2005 Coherent, Inc.
CO 2 LASER 9.2 - 10.8 MICRONS 125 WATT CW
Coherent
CO 2 Laser
Air-Cooled, RF-Excited
GEM-100A Air-Cooled RF-Excited OEM Industrial CO2 Laser A Diamond™ Family Laser
The GEM-100A Advantage The GEM™-100A OEM Industrial Laser delivers outstanding beam quality and amplitude stability in a compact package. It provides a low-cost solution to high operating costs by eliminating the need for liquid cooling, saving thousands of dollars in cooling-equipment costs while improving system reliability. Ruggedized for the most severe industrial environments, it is the standard of the industry. The GEM-100A features an efficient folded-resonator design contained within an all-metal housing. It’s a structural approach that gives the GEM-100A its outstanding beam quality and stability. Metal seals assure both long operational and shelf lifetimes. It is a robust and field-proven product. The all-solid-state RF power supply can be operated either CW or in a modulated mode, allowing the user a wide range of process control. The RF power supply is connected to the laser head by an industrial-quality, triple-shielded RF cable. Custom lengths are available upon request. All laser heads, RF supplies and cables are interchangeable. All control and monitoring signals are accessed through a 15-pin D-connector located on the RF supply. The GEM-100A offers many distinctive advantages. It is cost-effective, simple to use, and has low service requirements. Offered in both air-cooled and water-cooled versions, GEM-100 lasers offer straightforward installation. The superior performance of the GEM-100A is demonstrated in the high output per unit volume obtained with patentprotected technology.
FEATURES • Outstanding beam quality and stability • Direct air-cooling • Linear polarization • Highly compact • Low-cost OEM configuration • Fast rise/fall time • Up to 100% duty cycle operation • All-metal seals for long life • Interchangeable laser heads and RF power supplies • Wide operating power range
GEM-100A Laser Head
Air-Cooled RF-Excited OEM Industrial CO2 Laser
591.9 mm (23.30 in.)
104.6 mm (4.12 in.)
20.6 mm (0.81 in.)
25.4 mm (1.00 in.)
Beam Output
203.3 (8.00)
159.0 mm (6.26 in.)
150.4 mm (5.92 in.) 163.3 mm (6.43 in.)
463.8 mm (18.26 in.)
RF Power Supply 4-Lug 48 VDC Input Terminal Strip
15-Pin D Connector
228.6 mm (9.00 in.)
Type N RF Connector
GEM-100A System Specifications
Wavelength Output Power1 Power Stability2 Mode Quality Beam Size Beam Divergence Polarization Pulse Frequency Weight of Head Weight of Power Supply Dimensions
10.6 µm fixed 100W ±5% >95% TEM00, M2 <1.3 3.8 ±0.4 mm <5.0 mrad full angle >100 to 1 (fixed linear) Up to 25 kHz 11.8 kg (26 lbs.) 8.2 kg (18 lbs.) Shown above
Facility Requirements
Input Power
48 VDC 50A (70A peak for a minimum of 1 msec) ±2% regulation with remote sense. Heat Dissipation Maximum Case Temperature 1200W 55°C 800W 55°C
Surface Cooling Requirements Laser Head RF Power Supply Environmental3 Temperature Altitude Humidity
5 to 40°C (41 to 104°F) 2000 m (<6500 ft.) Non-condensing
1
Derate power by 1% / °C for laser head temperatures above 25°C. Power stability measured at constant duty cycle after 10-minute warm-up. 3 Adverse environmental conditions (high ambient temperatures, humidity or altitude) will limit the maximum allowable duty cycle. Systems designers must limit the duty cycle so that hardware surface temperature limits are not exceeded. Power supplies incorporate over-temperature protection. Specifications are subject to change without notice. Protected under U.S. patents: 4,787,090; 4,577,323; 4,443,877; 4,438,514 and 4,393,126 with others pending. Licensed by PATLEX Corp. under U.S. Patent 4,704,583. 2
Coherent, Inc. guarantees that the output power of the GEM-100A will exceed the rated power for a period of one year, independent of the actual operating time. Coherent, Inc. also warrants to the original purchaser for a period of one year from the date of delivery C O H E R E N T, I N C .
that the GEM-100A is free from defects in material and workmanship. The warranty does
5100 Patrick Henry Drive
not apply to any unit damaged by accident, abuse or operation in a manner inconsistent
Santa Clara, CA 95054 phone (800) 527-3786
Japan
+81 (3) 5635 8700
with the procedures and specifications outlined in the manual supplied with the laser.
(408) 764-4983
Benelux +31 (30) 280 6060
The GEM-100A is a laser component that does not include all safety features as required
(800) 362-1170
France
by the FDA and the Center for Devices and Radiological Health (CDRH). It is sold solely to
(408) 988-6838
Germany +49 (6071) 9680
qualified manufacturers who in their end product will supply all interlocks and indica-
e-mail
[email protected]
Italy
+39 (02) 34 530 214
tors, and will comply fully with CDRH regulations and/or local regulatory agencies.
web
UK
+44 (1353) 658 833
fax
www.Coherent.com
+33 (1) 6985 5145
VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IV LASER RADIATION PRODUCT PER EN60825-1 (1994)
Printed in the U.S.A. MC-103-01-2.5M0505Rev.D Copyright © 2005 Coherent, Inc.
CO 2 LASER 9.2 - 10.8 MICRONS 175 WATT CW
Coherent
CO 2 Laser
RF-Excited, Waveguide
GEM-30A Air-Cooled RF-Excited OEM Industrial CO2 Laser A Diamond™ Family Laser
The GEM-30A Advantage
FEATURES
The GEM™-30A OEM Industrial Laser delivers exceptional beam quality and superior amplitude stability in a compact package. Ruggedized for the most severe industrial environments, it is the standard of the industry.
• Ultra compact
The GEM-30A is the single-box integration of a high-performance RF power supply and an efficient, folded-resonator design. The result is a uniquely compact and versatile OEM package. It’s a structural approach that gives the GEM-30A its outstanding beam quality and stability. Metal seals assure both long operational and shelf lifetimes. It is a robust and field-proven product. The all-solid-state RF power supply can be operated either CW or in a modulated mode, allowing the user a wide range of process control. The RF power supply is integrated with the laser head. All control and monitoring signals are accessed through a 8-pin RJ-45 connector located on the laser. The GEM-30A offers many distinctive advantages. It is cost-effective, simple to use, and has low service requirements. Available in both air-cooled and water-cooled versions, GEM-30 lasers offer straightforward installation. The superior performance of the GEM-30A laser is demonstrated in the high output per unit volume obtained with its patent-protected technology.
• Excellent stability and beam quality • Single, integrated package • Cost-saving and simple, direct-air cooling • Linear polarization • Low-cost OEM configuration • Fast rise/fall time • Up to 100% duty cycle operation • All-metal seals for long life • Wide operating power range
GEM-30A
Air-Cooled RF-Excited OEM Industrial CO2 Laser
91.44 mm (3.6 in.)
Laser Head
Control Connector RJ45
26.67 mm (1.05 in.)
DC INPUT
Beam Out
83.3 mm (3.28 in.) 139.6 mm (5.49 in.)
19.6 mm (0.77 in.)
75.85 mm (2.986 in.)
357.0 mm (14.06 in.)
83.69 mm (3.295 in.)
GEM-30A System Specifications
Facility Requirements
Wavelength Output Power
10.55 to 10.63 µm 1
30W
Power Stability2
±5%
Mode Quality
>98% TEM00, M2 <1.2
Beam Size
1.8 ±0.2 mm
Beam Divergence
7.5 ±0.5 mrad full angle
Polarization
>100 to 1 (fixed linear)
Pulse Frequency
Up to 25 kHz
Weight
6.0 kg (13.5 lbs.)
Dimensions
Shown above
Input Power
48 VDC 12A (18A peak for a minimum of 1 msec) ±2% regulation. Remote sense recommended.
Surface Cooling Requirements Laser Head
Heat Dissipation 550W
Environmental Temperature Altitude Humidity
5 to 40°C (41 to 113°F) <2000 m (6500 ft.) Non-condensing
1 2
Maximum Case Temperature 60°C (140°F)
Derate power by 1% / °C for laser head temperatures above 25°C. Power stability measured at constant duty cycle after 10-minute warm-up. Specifications are subject to change without notice. Protected under U.S. patents: 4,787,090; 4,577,323; 4,443,877; 4,438,514 and 4,393,126 with others pending. Licensed by PATLEX Corp. under U.S. Patent 4,704,583.
Coherent, Inc. guarantees that the output power of the GEM-30A will exceed the rated power for a period of one year, independent of the actual operating time. Coherent, Inc. also warrants to the original purchaser for a period of one year from the date of delivery C O H E R E N T, I N C .
that the GEM-30A is free from defects in material and workmanship. The warranty does
5100 Patrick Henry Drive
not apply to any unit damaged by accident, abuse or operation in a manner inconsistent
Santa Clara, CA 95054 phone (800) 527-3786
Japan
+81 (3) 5635 8700
with the procedures and specifications outlined in the manual supplied with the laser.
(408) 764-4983
Benelux +31 (30) 280 6060
The GEM-30A is a laser component that does not include all safety features as required
(800) 362-1170
France
by the FDA and the Center for Devices and Radiological Health (CDRH). It is sold solely to
(408) 988-6838
Germany +49 (6071) 9680
qualified manufacturers who in their end product will supply all interlocks and indica-
e-mail
[email protected]
Italy
+39 (02) 34 530 214
tors, and will comply fully with CDRH regulations and/or local regulatory agencies.
web
UK
+44 (1353) 658 833
fax
www.Coherent.com
+33 (1) 6985 5145
VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IV LASER RADIATION PRODUCT PER EN60825-1 (1994)
Printed in the U.S.A. MC-080-02-2.5M0505Rev.B Copyright © 2005 Coherent, Inc.
CO 2 LASER 9.2 - 10.8 MICRONS 50 WATT CW
