Preview only show first 10 pages with watermark. For full document please download

Gem-emimod Ferrite Cable Clamps

   EMBED

Share

Transcript

GEM-EMIMOD GEM-EMIMOD INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS The GEM-EMIMOD kit consists of four 1½" ferrite cable clamps, each designed to suppress unwanted signal noise generated within the GEM-X255EX-230, GEM-P9600EX-230 and GEM-P3200EX-230 model panels. The GEM-EMIMOD kit consists of four 1½" ferrite cable clamps, each designed to suppress unwanted signal noise generated within the GEM-X255EX-230, GEM-P9600EX-230 and GEM-P3200EX-230 model panels. Install all ferrite cable clamps within the panel housing, on all wires and wire bundles (including the power cable but excluding the ground strap). Place one turn in each wire / wire bundle before installing each clamp, as follows: Install all ferrite cable clamps within the panel housing, on all wires and wire bundles (including the power cable but excluding the ground strap). Place one turn in each wire / wire bundle before installing each clamp, as follows: 1 loop 1 loop Clamp Cable Clamp Clamp Clamp WRONG CORRECT © NAPCO 2005 WI1405 12/05 Cable Clamp Clamp WRONG CORRECT © NAPCO 2005 WI1405 12/05 GEM-EMIMOD GEM-EMIMOD INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS The GEM-EMIMOD kit consists of four 1½" ferrite cable clamps, each designed to suppress unwanted signal noise generated within the GEM-X255EX-230, GEM-P9600EX-230 and GEM-P3200EX-230 model panels. The GEM-EMIMOD kit consists of four 1½" ferrite cable clamps, each designed to suppress unwanted signal noise generated within the GEM-X255EX-230, GEM-P9600EX-230 and GEM-P3200EX-230 model panels. Install all ferrite cable clamps within the panel housing, on all wires and wire bundles (including the power cable but excluding the ground strap). Place one turn in each wire / wire bundle before installing each clamp, as follows: Install all ferrite cable clamps within the panel housing, on all wires and wire bundles (including the power cable but excluding the ground strap). Place one turn in each wire / wire bundle before installing each clamp, as follows: 1 loop Clamp Cable Clamp © NAPCO 2005 CORRECT 1 loop Clamp Clamp WRONG WI1405 12/05 Cable Clamp © NAPCO 2005 CORRECT Clamp WRONG WI1405 12/05