Transcript
Broadband High Power Amplifier Product Name : RCA002053H50D, Code Name : Doc. Name : General Spec.
General Specification for RCA002053H50D
1
RESTRICTION ON USE, DUPLICATION, OR DISCLOSURE OF PROPRIETARY INFORMATION This document contains proprietary information, which is the sole property of RFcore co., LTD. The document is submitted to the recipient for his use only. By receiving this document the recipient undertakes not to duplicate the documents or to disclose in part of, or the whole of, any of the information contained herein to any third party without receiving before hand, written permission from the submitting company.
Created
Printed
2012/10/12
2012/10/15
Document Number
Revision
Manufacturer
E
RFcore co.,Ltd
File : RCA002053H50D General Spec.docx The Specifications is subject to change before finalization Customer Service: Tel. 82-31-708-7575 Email:
[email protected] http://www.rfcore.com
Broadband High Power Amplifier Product Name : RCA002053H50D, Code Name : Doc. Name : General Spec.
ELECTRICAL SPECIFICATIONS
@ 50 Ohms load, 28 Vdc, Tc ≒ 35
Parameter
℃
Specification
Frequency Range
20 ~ 530 MHz
Saturated Output Power
20-500MHz : 50 dBm min.
Remark @ Pin=5dBm, CW
500-530MHz : 49 dBm min. Output Power
47 dBm min.
@ CW
Gain
50 dB min.
Over Temperature
Gain Flatness
± 3.0 dB
at 1dB Compression Point
Maximum Input Power for no damage on DC ON Maximum Input Power for no damage on DC OFF Maximum Output Load Condition
10 dBm max 20 dBm max Infinite VSWR
Input VSWR
Less than 1.5 : 1
On/Off Switching Time
1 usec typ.
DC Input Voltage
28V ± 0.5 Vdc
Survival condition
DC input should be 28V and must withstand short spikes within 5 microseconds up to 35V when RF
2
output condition is 50 ohms. Current Consumption
7.5A typ. , 11.5 A max.
RF Input Signal Format
CW
I/O Map
1.
GND
2.
Fast Back-off
3.
VSWR Fail Alarm
4.
Efficiency > 43% @ 100W
It should be disconnected. 4:1
