Transcript
Web: www.shunshinghk.com.hk
22mm
55mm
Tel: [852] 2426-2597 Fax: [852] 2487-2967 Email:
[email protected]
88mm
Product Type Model Name(Number) General Specification
Microprocessor Controlled Battery Charger (BC026) Charging Input: DC 5V 1A (USB 2.0) Output: DC 2.8V x2 380mA USB Output: DC 5V 1A (USB 2.0)
Dimension(Charger): 55 x 88 x 22mm Operation Temperature: 0 ~ 30°C Storage Temperature: -20°C ~ 60°C
Safety Standard
FCC Part 15, Subpart B, IC Regulation ICES-003, EN55014-1, EN55014-2, EN55015, EN55022, EN55024, EN61547, EN60950-1
Safety Mark Features
- Ni-MH battery charger, charges 2 or 4 pcs of AAA Ni-MH batteries. - Powered by USB Power. - With negative delta V(-dv), automatic cut-off for safety protection. - 2 x Temperature sensors for over temperature protection. - Max. charging time cut-off, for double protection. - Defective or unrechargeable batteries detection. - Reverse polarity protection, protects the batteries against incorrectly installed batteries. - Over current protection, maintains constant charging current during the charge cycle. - Short circuit protection, protects the charger if you attempt to charge shorted batteries. - Trickle charge after full charge. - Charging indicator: Red : Charging. Green : Fully charged. Flash : Defective battery or non-rechargeable battery. Using Features: - Instant USB power output with Alkaline or NiMH AAAx4. - Bright LED Torch.
Charging Time
Types & sizes of the batteries
Charging time(minutes)
900mAh Ni-MH AA
170
800mAh Ni-MH AA
150
700mAh Ni-MH AA
130
This chart is for reference only. The datas are only the approximation.
Your Partner in Safe Power.
