Transcript
General specifications (MG20, MG16, MG12) Outline MG20 Phantom I/O +48V power Mono[MIC/ 12 LINE] Input Mono/Stereo 4 Channels [MIC/LINE] Stereo[LINE ] STEREO 2 OUT MONITOR 1 OUT Output Channels PHONES 1 AUX SEND 4 GROUP 4 OUT Stereo: 1, GROUP: 4, Bus AUX: 4 PAD 26 dB(Mono) 80 Hz, 12 dB/oct HPF (Mono/Stereo: MIC only) 1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to COMP 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Input Release time: approx. Channel 300 msec Function Gain: +15 dB/-15 dB, EQ HIGH Frequency: 10 kHz shelving Gain: +15 dB/-15 dB, Frequency: Mono 250 EQ MID Hz – 5 kHz peaking, Stereo 2.5 kHz peaking Gain: +15 dB/-15 dB, EQ LOW Frequency: 100 Hz shelving
MG16
MG12
+48 V
+48 V
8
4
2
2
2
2
2
2
1
1
1 4
1 2
4
2
Stereo: 1, GROUP: 4, AUX: 4 26 dB (Mono) 80 Hz, 12 dB/oct (Mono/Stereo: MIC only) 1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
Stereo: 1, GROUP: 2, AUX: 2 26 dB (Mono) 80 Hz, 12 dB/oct (Mono/Stereo: MIC only) 1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
Gain: +15 dB/-15 dB, Frequency: Mono 250 Hz – 5 kHz peaking
Gain: +15 dB/-15 dB, Frequency: 2.5 kHz peaking
Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
PEAK LED
Level Meter General specifications
Total harmonic distortion
Frequency response
Hum & noise level
Equivalent input noise Residual output noise
Crosstalk Power requirements Power consumption W Dimensions H D Net weight
Accessories
Others
LED turns on when post EQ signal reaches 3 dB below clipping(Mono) 2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB] MG20 0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) -102 dBu (STEREO OUT, STEREO master fader: Min) -78 dB AC 100 – 240 V, 50 / 60 Hz 36 W 444 mm (17.5") 130 mm (5.1") 500 mm (19.7") 6.9kg (15.2 lbs.)
LED turns on when LED turns on when post post EQ signal reaches EQ signal reaches 3 dB 3 dB below clipping below clipping
2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB] MG16 MG12 0.03 % @ +14dBu (20 0.03 % @ +14dBu (20 Hz to 20kHz), GAIN Hz to 20kHz), GAIN knob: Min, 0.005 % @ knob: Min, 0.005 % @ +24dBu (1kHz), GAIN +24dBu (1kHz), GAIN knob: Min knob: Min +0.5 dB/-1.5 dB (20 Hz +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the to 48 kHz) , refer to the nominal output level @ nominal output level @ 1 kHz, GAIN knob: 1 kHz, GAIN knob: Min Min -128 dBu (Mono Input -128 dBu (Mono Input Channel, Rs: 150Ω, Channel, Rs: 150Ω, GAIN knob: Max) GAIN knob: Max) -102 dBu (STEREO -102 dBu (STEREO OUT, STEREO master OUT, STEREO master fader: Min) fader: Min) -78 dB -78 dB AC 100 – 240 V, 50 / AC 100 – 240 V, 50 / 60 60 Hz Hz 30 W 22 W 444 mm (17.5") 308 mm (12.1") 130 mm (5.1") 118 mm (4.6") 500 mm (19.7") 422 mm (16.6") 6.6 kg (14.6 lbs.) 4.0 kg (8.8 lbs.) Included Accessory: Included Accessory: Included Accessory: Owner’s Manual, Owner’s Manual, Owner’s Manual, Technical Technical Technical Specifications, AC Specifications, AC Specifications, AC power cord, Optional power cord, Rackpower cord, RackAccessory: Rack-mount mount kit mount kit kit RK-MG12 Operating Temperature: Operating Temperature: Operating Temperature: 0 to +40˚C 0 to +40˚C 0 to +40˚C
MG12 Analog Input Characteristics Input
PAD
GAIN
Actual
For Use
Input level
Connector
26 dB
terminal
Trim Load With Position Impedance Nominal +64 dB
OFF +20 dB
MIC/LINE
3kΩ 1–4 +38 dB ON -6 dB +64 dB MIC 5/6, 7/8
–
3kΩ +20 dB
LINE 5/6, 7/8
+38 dB –
10kΩ -6 dB
LINE 9/10
–
–
10kΩ
Sensitivity *1
-80 dBu (0.077 mV) -36 dBu 50-600Ω (12.3 Mics/Line mV) s -54 dBu (1.55 mV) -10 dBu (245 mV) -80 dBu (0.077 50-600Ω mV) Mic -36 dBu (12. 3 mV) -54 dBu (1.55 600Ω mV) Lines -10 dBu (245 mV) 600Ω Lines
-30 dBu (24.5 mV)
Nominal -60 dBu (0.775 mV) -16 dBu (122.8 mV) -34 dBu (15.46 mV) +10 dBu (2.451 V) -60 dBu (0.775 mV) -16 dBu (122.8 mV) -34 dBu (15.46 mV) +10 dBu (2.451 V)
Max. before clip -40 dBu (7.75 mV) +4 dBu (1.228V) -14 dBu (154.6 mV)
Combo jack*2 (Balanced)
+30 dBu (24.51 V) -40 dBu (7.75 mV) -6 dBu (388.2mV)
XLR-3-31 *3 (Balanced)
-14 dBu (154.6 mV) Phone jack *5 +30 dBu (24.51 V)
(Unbalanced) Phone jack *5
-10 dBu +10 dBu (245 mV) (2.45 V)
RCA Pin (Unbalanced)
MG12 Analog Output Characteristics Actual source Output Terminals impedance
For Use With Nominal
Output level Max. before Nominal clip
Connector
600Ω Lines
+4 dBu (1.228 V)
+24 dBu (12.28 V)
XLR-3-32 *3 Phone jack *4 (Balanced)
MONITOR OUT [L, R] 150Ω GROUP OUT [1, 2] AUX SEND [1, 2]
10kΩ Lines
+4 dBu (1.228 V)
+20 dBu (7.750 V)
Phone jack *4 (Impedance Balanced)
PHONES
40Ω Phones
3mW + 3mW
100mW + 100mW
Stereo phone jack
STEREO OUT [L, R]
75Ω
110Ω
