Transcript
IP alarm module Art. no. CASA10010
Page 1 of 2
• The intelligent link between alarm and video surveillance • 2 zones for up to 8 wireless detectors or wireless operating units (feedback only in conjunction with recorder) • Expands Secvest IP by 2 zones for up to 8 wireless detectors • Compatible with Secvest 2WAY components (except wireless key switches and wireless control panel) • Receives alarm messages via 868 MHz wireless or IP network (detector and video recording equipment) • Activates wireless sounder, wireless socket • Activates and deactivates recording equipment through commands over the network • Compatible with VMS Basic/Professional/Enterprise and HDVR from VMS Version 7.0 • 12 V power supply (power supply unit required) The IP alarm module offers an intelligent and innovative logical connection between alarm technology and IP video surveillance, thus giving added extra value for security. The areas of application for the IP alarm module are very comprehensive, and may vary according to the system connection: Zone expansion in Secvest IP: Using the module, the Secvest IP can be expanded by two additional zones of four detectors (i.e. eight detectors in total). All Secvest 2WAY detectors can be integrated in this way. PIR network camera: The integration of wireless remote controls, wireless detectors, and wireless sirens means that the PIR network camera can be expanded into an intelligent IP alarm system. The PIR network camera is activated using the wireless remote control. As soon as this camera registers an alarm and the recording is started, an e-mail is sent with images attached. The alarm can also be activated simultaneously via the IP alarm system using wireless sirens. Video activation: When used with a recording device, NAS, HDR, HDVR, or NVR, the IP alarm module allows the expansion of existing wired inputs and outputs at the recording devices by two further inputs and two further outputs. These are integrated into the corresponding recording device over the local network. The IP alarm module thus allows recorder activation or alarm recording when used in combination with Secvest wireless components and the recorder programming. In the event of an alarm, the module can trigger further reactions using the wireless siren and wireless power socket.
Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 02/2014
Powered by TCPDF (www.tcpdf.org)
IP alarm module Art. no. CASA10010
Page 2 of 2
Technical Data: Dimensions Number of remote controls Number of wireless zones Width Radio frequency Transmission power Housing material Height
(WxHxD) 122x208x42 mm 4 2 135 mm 868 10 ABS 220 mm
Length Power consumption Modulation LAN network access Tamper monitoring DC voltage supply Power consumption
Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 02/2014
42 mm 0,84 FM FM / AM RJ45, 10/100 Mbit No 12 V 70 mA
