Transcript
Live! are active speakers designed for mobile applications: Suitable as main PA for live music, theatre, conference and, thanks to the multiangled cabinet, also like floor monitor. Can be also used as side or fill in large systems and as monitor for drumfill or DJ booth.
L ighweight I mpressive V e r s a t ile E c on o mi c
L15C L15D
L12C L12D L10C L10D
input and DSP board
AUDIO High SPL for a clear and detailed sound, even in most demanding applications. Thanks to the careful electroacoustic integration, low distortion and non-resonant filters, the feedback is drastically reduced despite the high sound pressure levels that the speaker produce. COMPONENTS
power amp module
The class D integrated amplifiers module provides high dynamic and low distortion even in the most demanding working conditions. The power supply (SMPS with PFC) ensures a high energy efficiency. The digital controller provides crossover, limiter and phase alignment circuits between the transducers, ensuring maximum audio fidelity for a pleasant and perfectly focused sound reproduction. The seamless mechanical and electroacoustic integration ensures high performance and high reliability over time.
asymmetrical vertical dispersion
Large internal aluminium heatsink (with progressive fan for the subwoofer) ensures thermal stability. All full range models are available with a differential dispersion horn (suffix -D) or with a constant directivity horn (suffix -C) . Both can be rotated for vertical use or as a floor monitor. The differential D horn has an asymmetrical vertical dispersion pattern; in the horizontal plane, the opening is wider in the bottom and narrower upwards: this gives a greater uniformity of listening in a rectangular area, typical closed environments. Instead the constant coverage C horn can be coupled, allowing the use of cluster of two or more speakers to increase the coverage and SPL.
orizzontal differential dispersion
50° 100°
L18S
rear panel
L12S
CONSTRUCTION Birch plywood cabinets are designed and assembled using advanced construction techniques that make them extremely rugged and reliable: grilles are galvanized and the speakers have a special anti-moisture treatment. Stainless steel screws A2. Ergonomic recessed handles, non-slipping and anti-scratch feet.
pole mount
Neutrik XLR and Powercon connectors. FINISH structural , The loudspeakers are available in black matte scratch-resistant painted by IPX (poliurea based). This painting allows to color the cabinet with other water-based paints.
flightcase
ACCESSORIES A complete set of accessories for easy installation and trasport of the speakers: brackets, standard pole, flightcases and cover. LTB1 is an hanging bracket for L10, L12 and L15. Is equipped with fastlock 1/4 keys to easy connect the loudspeakers. cover LTB1 tilt bracket
瘀 攀 爀 琀 dolly
L10 Description
L12
L15
-
-
Horn
L10C- costant coverage; L12C- costant coverage; L15C- costant coverage; L10D- TRX differential L12D- TRX differential L15D- TRX differential
-
Dispersion
L10C- 60° x 40° rotable; L12C- 60° x 40° rotable; L15C- 60° x 40° rotable; omni L10D- 50°-100° x 55° L12D- 50°-100° x 55° L15D- 50°-100° x 55° rotable rotable rotable
omni
65-18000 Hz (-3dB)
42 - 140 Hz (-3dB)
27 - 90 Hz (-3dB)
1200WAES 128 dB (@1m cont.) Birch plywood 15 mm matte black IPX paint
1700 WAES 130 dB (@1m cont.) Birch plywood 18 mm matte black IPX paint
2 handles; 8 rubber feet; threaded M20 pole mount.
4 handles; 8 rubber feet; threaded M20 pole mount.
powdercoated perforated steel 1,2mm 486 x 397 x 516 mm (LxHxP) 27 Kg XLR input, link; Powercon mains in, link out 110/230V; 50/60 hz; 1250VA peak
powdercoated perforated steel 1,2mm 558 x 605 x 665 mm (LxHxP) 47 Kg XLR input, link; Powercon mains in, link out 110/230V; 50/60 hz; 1700VA peak
Frequency response Crossover Rated power Max SPL Construction Finish
1100 Hz active 350+350 WAES 120 dB (@1m cont.) Birch plywood 12 mm matte black IPX paint 2 handles; 10 rubber feet; 10 threaded Fittings inserts M8; standard pole mount; inserts for fastlock bracket powdercoated Grille perforated steel 1,2mm 384 x 633 x 396 mm Dimensions (LxHxP) Weight 13 Kg XLR input, link; Connectors Powercon mains in, link out 110/230V; 50/60 hz; AC input 1000VA peak
Full range 15" neodymium; 3" coil 1,4" neodymium; 3" coil
L18S Subwoofer 18'' ferrite; 4'' coil
Driver
Full range 12'' neodymium; 3'' coil 1,4''neodymium; 2,5'' coil
L12S Subwoofer 12'' ferrite; 4'' coil
Woofer
Full range 10'' neodymium; 2,5'' coil 1'' ferrite; 1,7'' coil
55-18000 Hz (-3dB)
55-18000 Hz (-3dB)
850 Hz active 500+500 WAES 124 dB (@1m cont.) Birch plywood 15 mm matte black IPX paint 4 handles; 12 rubber feet; 10 threaded inserts M8; standard pole mount; inserts for fastlock bracket powdercoated perforated steel 1,2mm 444 x 704 x 415 mm (LxHxP) 20 Kg XLR input, link; Powercon mains in, link out 110/230V; 50/60 hz; 1250VA peak
650 Hz active 800+800 WAES 126 dB (@1m cont.) Birch plywood 15 mm matte black IPX paint 5 handles; 14 rubber feet; 10 threaded inserts M8; standard pole mount; inserts for fastlock bracket powdercoated perforated steel 1,2mm 464 x 724 x 495 mm (LxHxP) 28 Kg XLR input, link; Powercon mains in, link out 110/230V; 50/60 hz; 1700VA peak
AudioFactory manufacturing philosophy is committed and engaged to continuous research for product improvement. Thus materials, components, production methods and design refinements could be introduced into existing products without notice. For this reason, any current AudioFactory product may differ slightly in some respect from its published description, but it will always equal or exceed the original design specifications, unless otherwise stated.
All AudioFactory products are completely designed, engineered and manufactured in Italy Extended warranty 5 years
AudioFactory Via Traspontina, 23 - 00040 Ariccia (Roma) Italia tel. +3906 9765 0449 - fax: +3906 9765 0427 - mail:
[email protected]
