Transcript
GHIBLI PDC Mono block heat pump
Technical and construction features The most compact model on the market with only 660 mm width. Very quiet operation thanks to the use of internal fans with a larger diameter (greater than 96 mm), operating at low number of turns and a fan for external exchange Radial EBM Germany with a large diameter (greater than 220 mm). Copper exchanger tubes stripped (inner groove) with aluminum fins turbolenced, wide surface, with hydrophilic treatment to increase the exchange, improving the drainage of condensation and reducing the aging. Summer evaporation of the condense, with indoor humidity up to 50/60%, thanks to the direct evaporation on the hot battery by means of a distributor, without the need of a pump. Elimination output dedicated for condensate drain via condensate drain winter /overflow, summer, integrated in the hole of air intake. It takes only 2 holes for entrance / exit air by eliminating the exhaust hole with consequent greater ease of installation. Very low vibrations thanks to the use of compressors Twin Rotary (rotary double rotor) and its mounting on springs, that ensure greater efficiency and less noise. Galvanized steel structure thick to eliminate any vibrations of moving parts (compressor, fans). Supply conditioned air up for better distribution environment without annoying streams directed to people. Condensation control, device that allows the operation in cooling mode, dehumidification also with low outdoor temperatures, by controlling the temperature of the external heat exchanger connected to a suitable sensor that modulates the external fan. Defrosting system with external sensor that allows you to defrost only at low temperatures, when it is necessary to improving the efficiency of the heat pump and allowing winter use up (with the kit winter for low temperature) to -11 °C outside. Extraction air filter simplified for periodic cleaning. Front panel for inspection and easy access for extraordinary maintenance. Control electronics installed on the left side, out of the streams air and the condensate to improve the reliability and to facilitate the replacement of fuses or internal parts. Intrusion grilles as standard on the air intakes designed to adapt perfectly to the pipes air flow / output, diameter of 160 mm. Nozzle of intrusion dedicated for use in mobile homes. Auto-restart series, in case of power failure, the machine resumes work maintaining the functions previously set. Hydrostatic transmission option for turning the machine in winter in case of R.H. greater than the set. Command on the machine to work without a remote control.
NO EXTERNAL UNIT
RENEWABLE ENERGY
INSTALLATION PLUG AND PLAY
HIGH EFFICIENCY
ECOLOGIC GAS
FUNCTION TO LOWLAND TEMPERATURE
SILENT VENTILATION
ENERGY SAVING
ENCLOSED AUTORESTART
COMPACT DIMENSION
Code
€
Thermal output kW
Cooling capacity kW
GHIBLI PDC 9
2,56
2,35
35350010
1.760,00
GHIBLI PDC 11
2,94
2,84
35350020
1.880,00
GHIBLI PDC 13
3,59
3,35
35350030
2.140,00
Model
MODELS FROM DECEMBER 2015 GHIBLI PDC 18
5,12
4,70
35350040
2.940,00
GHIBLI PDC 22
5,88
5,68
35350050
3.120,00
GHIBLI PDC 26
7,18
6,70
35350060
3.680,00
169
GHIBLI PDC Mono block heat pump
Accessoires GHIBLI PDC
Code
€
Pipes / intake air Ø 160 mm - L 400 mm
35350011
84,00
Grills / intake air Ø 160 mm
35350012
Included
Size and dimensions GHIBLI PDC
duct expulsion
MODEL
Ø
Ø
duct aspiration
unloading condensate
A
B
C
Ø
Weight
mm
mm
mm
mm
kg
GHIBLI PDC 9
660
660
255
160
40
GHIBLI PDC 11
660
660
255
160
42
GHIBLI PDC 13
960
660
255
160
52
GHIBLI PDC 18
960
660
255
250
54
GHIBLI PDC 22
960
660
255
250
54
GHIBLI PDC 26
960
660
255
300
54
Technical data table GHIBLI PDC Model
AVAILABLE FROM DECEMBER 2015
U.M.
GHIBLI PDC 9
GHIBLI PDC 11
GHIBLI PDC 13
GHIBLI PDC 18
GHIBLI PDC 22
GHIBLI PDC 26
Cooling capacity
kW
2,35
2,84
3,35
4,70
5,68
6,70
Absorbed power
W
900
1090
1288
1800
2180
3864
W/W
2,61
2,60
2,61
2,61
2,60
2,61
Heat Output
kW
2,56
2,94
3,59
5,12
5,88
7,18
Absorbed power
W
850
977
1190
1700
1954
2380
700
700
800
EER
COP Air Flow Rate
W/W 3/h
m
3,01 350
380
450
Refrigerant
R410A
Compressor
Rotary 230/1/50Hz
Supply Sound Level (1) (2) Dehumidification
dB (A)
39/54
39/55
39/56
41/58
41/59
42/59
l/h
0,6
0,8
1,1
1,2
1,6
2,2
(1) Yields related to machine recessed installation at average speed (2) Yields related to machine wall installation at a speed max
170
