Transcript
848-B Hanover St. Carlisle, PA 17013 (866) 902-2606 x105
[email protected]
“GigaBUD 1000” Product Description The 54 MHz to 860 MHz “GigaBUD 1000” RF 24 Port Front Panel video hub (not a “switch”) distributes 134 EIA 6 MHz channels which provides up to 158 NTSC analog channels or hundreds of sd/hd QAM channels. The video hub automatically, splits, 12 Port amplifies, slopes, and adjusts the input and output Front Panel signals to ensure the level and quality at each receiving TV. The backbone cable can be either single-mode fiber and/or standard coax cascadeds to other hubs in a star topology. Hubs are capable of handling return channel information for DOCSIS Rear Panel 3.0 or FSK. This active “GigaBUD 1000” can adjust for input signals ± 3 dB in both slope and level, and still provide consistent output needed for quality TV. Each Z-Band System includes a “Mini Monitor” program that will display the operating condition for a particular hub (laptop required). These hub conditions include: • Input level • Tone level of each coax output port • Power supply status • Ability to turn each port on/off • Temperature These video hubs connected to Z-Band’s Zip232 control unit are also able to distribute RS232 signals to individual or group of TVs for controlling power on/off, channel, and volume selection.
Ordering Information Z 2400 Z 2400-F Z 1200 Z 1200-F
24 Port Video Hub 24 Port Video Hub w/Fiber RX 12 Port Video Hub 12 Port Video Hub w/Fiber RX
Model
Z 2400
Z 2400-F* 24 Port Hub
Z 1200 Z 1200-F* 12 Port Hub
Weight: Approximately 6.5 lbs. Size: 12” L x 19” W x 3.5”H standard size enclosure with mounting ears Mounts in standard 19” rack / 2U High Four status indicator lights: master (red); slave (green); power status (red/green), tone status (red/green) Physical Description
Front Panel: two rows of shielded RJ-45 Jacks (24 per row and 12 per row versions) Rear Panel: 19 F-Connectors; eight Outbound; eight Inbound; one Cascade In; one Cascade Out; one CATV In. Mini USB Drive *One single-mode fiber connector (optional) UTP outbound RF video on pins 7&8, return RF on pins 4&5, and shared sheath with 10/100 Ethernet on pins 1,2,3,&6.
www.z-band.com
April 2013
848-B Hanover Street Carlisle, PA 17013 Phone: (866) 902-2606 Fax: (717) 249-3253
[email protected]
“GigaBUD 1000” Model
Electrical Power
Electrical Radio Frequency
System Performance
Z 2400
Z 2400-F
Z 1200
Z 1200-F
Input Voltage: 90-264 VAC auto sensing Input Current: 1.5/115 VAC, 1A/230 VAC (fused 2A) Input Frequency: 47 HZ to 63 HZ DC Power: Maximum 125 Watts Meets all safety standards: UL/CSA Listed UTP Outbound Power: 8 VDC on pins 7&8. Power is switched to each individual port only when impedance signature from “GigaBOB” is recognized. Bandwidth: Forward: 54 MHz to 860 CAT 6 Cable; Call Z-Band for higher frequencies DOCSIS/FSK modem/T-Channel Video Return Compatible: 5 MHz to 42 MHz Pilot Tone: Frequency: 240 MHz Output Level: +23dBmV on all eight coax Outbound ports on rear panel Automatic Gain Control (AGC) Automatic Slope Control (ASC)
C/N: greater than 43 dB CTB: greater than 50 dB (134 channel loading) CSO: greater than 51 dB (134 channel loading) UTP Output Launch Level: 25 -38 dBmV digital signal MER: greater than 32 dB Auto Level: System can accommodate input signal of ± 4 dB level. Slope can vary ± 4 dB from flat. Recommended CATV Input: ±23 dBmV flat, NTSC; ±17 dBmV flat ATSC or QAM Standard reverse upstream path accommodates RF modem
Environmental
Agency Standards
Operating Temperature: 0 to 55° C Relative Humidity: 5 to 95% Storage Temperature: -40 to 70° C BTU/HR: Approx. 400 UL/CSA Listed; FCC Regulations, Part 15 Compliant; TIA/EIA 568 A or B
www.z-band.com April 2013
