Transcript
Gio6 OS Installation Guide
Copyright © 2004-2015 VXL Instruments Limited. All Rights Reserved. Information in this document is subject to change without prior notice and does not represent a commitment on the part of the manufacturer. No part of this guide may be reproduced or transmitted in any form or means, electronic or mechanical, including photo copying and recording, for any purpose, without the express written permission of the manufacturer.
Registered trademarks are properties of their respective owners. Every effort has been made to make this guide as complete and as accurate as possible, but no warranty of fitness is implied. The authors and the publisher shall have neither responsibility nor liability to any person or entity with respect to loss or damages arising from the use of information contained in this guide. Last Updated: 30th Oct, 2015 Version: X64-G6-3.13-01-001-545-STD
VXL Instruments Ltd., House of Excellence, No. 17, Electronics City, Hosur Road, Bangalore– 560 100, INDIA. www.vxl.net
Installing Gio6 OS Several VXL Instruments thin client models come pre-installed with the Gio6 operating system. If you want to install the GIO6 operating system on a supported thin client, follow the instructions provided in this Installation Guide.
Prerequisites:
A flash drive with a capacity of 2 GB or above.
A GIO6 installation .ISO file. Or
A GIO6 bootable USB flash drive (created using an .ISO to bootable USB flash drive converter. For example, UNetbootin).
If you have a GIO6 OS bootable USB flash drive, perform the steps in ‘Installation’ section on page 2. If you do not already have a GIO6 5 bootable USB flash drive, perform the following steps: 1. Download and Install UNetbootin application on your Linux or Windows machine. Note: You can download UNetbootin from the following link: http://unetbootin.sourceforge.net/ 2. Insert a flash drive of 2 GB capacity or more in the USB port. 3. Launch the UNetbootin application.
4. Select Disk image. 5. Select ISO, browse and select the GIO6 ISO file. 6. In the Type field, select USB Drive. 7. In the Drive field, select the flash drive. Installing GIO6 5
1
8. Click OK. Note: For more information about using the UNetbootin application, visit: http://sourceforge.net/apps/trac/unetbootin/wiki
Installation To install GIO6 OS on your thin client from your GIO6 OS bootable USB flash drive: 1. Insert the USB flash drive which has the GIO6 OS installation pack in the USB port of your thin client. 2. Switch on the thin client. 3. Press the Delete key immediately after the thin client starts. The Enter CURRENT password screen appears. 4. Enter drupad.
Note: You only have a few seconds to press the Delete key to access the BIOS. You will not be able to access the BIOS after the operating system starts loading. 5. Select boot using your arrow keys, press Enter.
2 5
Installing GIO6
6. Under Boot Settings, select Hard Disk Drives.
st Drive.
7. Set your USB flash drive as the 1
8. Press the F10 key. The save configuration dialog box appears.
9. Click OK. Your thin client will restart. After the reboot, the UNetbootin window appears.
10 It will prompt for yes/no options. If user types yes then installation process continues. If user types no then Installation stops.
12. After this existing partition will be deleted and new partitions will be created.
13. After creating the partition, Created partition will be formatted and Image dumping will be started.
14. Once the Image dumping is done, Remove all USB device and press Enter, System will Shutdown.
