Transcript
GIVI MONOKEY TOP CASE MOUNTING SYSTEM INSTALLATION INSTRUCTIONS Dear Rider, Thank you for choosing AltRider! Whether a seasoned world adventurer or a first time ADV-Newbie, we welcome you to the AltRider experience. You can install your new product with the utmost confidence. AltRider designs, tests, and manufactures all of its products here in the United States. We are proud to do what we do, and honored to present to you the product of our labors. Enjoy it, show it off, and most of all, RIDE IT! Venture On, Jeremy LeBreton
Givi Mono Key Mounting Kit Package Contents: - thread locker - instructions - hardware kit
AltRider LLC mailing: phone: email: web:
4000 Aurora Ave N Ste 100
Seattle, WA 98103 USA 206-922-3618
[email protected] www.altrider.com Rev 1 MADE IN THE USA
1
Givi Monokey // Mount Kit // Installation Instructions
2
6 5
3 4
7
Kit: 1 Paper Instructions 2 Pyramid
8
1
3 (4) M6 washers 4 (2) M6 x 12 button head fasteners 5 (2) M6 x 30 flat head fasteners 6 (4) Rubber Bumpers 7 (2) Mushroom Spacers 8 (2) M6 nylock nuts 9 (1) .5ml thread locker
9
Recommended tools:
1 2
3
1
10mm wrench
2
4mm allen tool
3
hardware tray
2
Givi Monokey // Mount Kit // Installation Instructions
!
2
You may have to remove your luggage rack to install this kit. Evaluate before beginning installation.
1
Assemble the lock tower as shown. Apply one drop of thread locker (included) to the last couple of threads of the two fasteners before inserting them.
2
Assemble the posts as shown, in this order: M6-post-rackwasher-nylock nut. No thread locker is necessary.
3
After installing the tower and both posts, put your luggage rack back on the bike (if you had to remove it to install).
4
Clean the surface of Givi box (alcohol pad or similar recommended). See the suggested guide above for placement (optimal placement of bumpers differs by top box. or most secure fit, apply where maximum contact occurs between rack and top box). Bumpers can be applied on rack or top box.
3
Givi Monokey // Mount Kit // Installation Instructions
This is the left half of the template. Cut both halves out and tape them along the ‘middle line’. Cut out the openenings with an xacto.
middle line
4
Givi Monokey // Mount Kit // Installation Instructions
This is the left half of the template. Cut both halves out and tape them along the ‘middle line’. Cut out the openenings with an xacto.
middle line
5
Givi Monokey // Mount Kit // Installation Instructions TERMS OF USE, WARRANTY AND LIABILITY WAIVER
CONGRATULATIONS! You’ve completed your installation. If at any point you have questions about your installation or have any feed back for us, we’d love to hear it. A downloadable version of these instructions can be found at our web site. www.AltRider.com
AltRider LLC, a Washington company, having its principal place of business in Seattle, WA (“AltRider”) offers its motorcycle accessories (the “Product”) with the terms, conditions and notices as follows:
Terms of Use This Product is offered to you conditioned upon your acceptance without modification of the terms, conditions, and notices contained herein. Installation and/or use of this product implies acceptance of all such terms, conditions, and notices. If you do not agree to these terms, do not buy the Product. If you have already bought the Product and do not agree to these terms, return this Product promptly including the packaging and all written materials, to AltRider.
Limitation of Liability and Warranty Disclaimer You may return your merchandise for a full refund or exchange, less any original or return shipping fees under these conditions: 1. Only if the merchandise is in 100% factory condition. Original manufacturer’s packaging and same condition as sold – original boxes, packaging material, instructions, documentation, parts, and attached tags. 2. Only unused, unscratched, uninstalled, undamaged merchandise will be accepted. Do not install equipment until you are sure you want to keep it. Package items carefully in protective materials before returning them. Never ship an item in its original manufacturers packaging – it will arrive damaged. Please use a postal box or other adequate packaging to ensure your return or exchange is not damaged on the way back to AltRider.com. To read more about our exchanges and returns policy, on the web, navigate to www.altrider.com/index.php/symfony/exchangesAndReturns Excepting the warranties stated in the preceding paragraph, AltRider hereby disclaims all other warranties and conditions with regard to the Product including all implied warranties and conditions of merchantability and fitness for a particular purpose. There are no warranties which extend beyond the description on the face hereof. AltRider does not warrant against damages or defects arising out of use or installation of the Product. Installation instructions are provided for your convenience. AltRider is not responsible for any damages arising out of the installation, improper or otherwise, of the Product. No warranty of any kind, expressed or implied, is made regarding the safety of this Product. To the extent allowed by law, AltRider shall not be held liable for any direct, indirect, punitive, incidental, special or consequential damages arising out of, or connected with, the use or misuse of this Product. Buyer assumes all risks and liability arising from use of this Product.
Entire Agreement This document states the entire obligation of AltRider with respect to the Product. If any part of this agreement is determined to be void, invalid, unenforceable or illegal, including, but not limited to the warranty disclaimers and liability limitations set forth above, then the remainder of the agreement shall remain in full force and effect.
Applicable Law This agreement is governed by the laws of Washington, USA. You hereby consent to the exclusive jurisdiction and venue of the courts of Washington, USA, in all disputes arising out of or relating to the use of this product.
email: phone: address:
[email protected] +1 206-922-3618 4000 Aurora Ave N Ste 100 Seattle, WA 98103
