Preview only show first 10 pages with watermark. For full document please download

Goodman Installation Manual

   EMBED

Share

Transcript

DPI ©1991-2009 Goodman Manufacturing Company, L.P. 5151 San Felipe, Suite 500, Houston, TX 77056 www.goodmanmfg.com -or- www.amana-hac.com P/N: IO-546A Date: March 2009 DRAIN PAN KIT INSTALLATION INSTRUCTIONS Figure 1 DPI KITS UNITS USED ON A B C D DPI18-30/20 A18-30 7.000 3.063 3.563 16.750 DPI36-42/20 A36-42 11.000 3.063 3.563 16.750 DPI48-61/20* A48-61 13.250 3.375 3.500 19.750 * Requires permagum seal per locations shown in Figure 2. Kit Instructions 1. Cut the insulation pieces per the lengths indicated in the table above. 2. Install longer pieces first on the pan. Ensure the leading edge of insulation is flush with the top edge of the pan; then wrap insulation around corners. 3. Next install the shorter pieces. Again ensure the leading edge of insulation is flush with the top edge of the pan. The shorter pieces will overlap the longer pieces. 4. Divide the supplied permagum in half. On the side with the drain holes, install each piece to close the gap between the endplate and drain pan (Figure 2). PERMAGUM Figure 2