Preview only show first 10 pages with watermark. For full document please download

Gooseneck Cardioid Condenser Microphone Fitted With Silent Operation Reed Switch With... C 34es/sr-rf Description

   EMBED


Share

Transcript

C 34ES/SR-RF DESCRIPTION Gooseneck Cardioid Condenser Microphone fitted with silent operation reed switch with micro LED indicator. Response optimised for consistent sound quality. Unobtrusive slimline design. Superior grade components. Engineered in high quality brass. Phantom Power Adaptor. Contains a miniature LED indicator to allow visual On/Off operation to the user. Pop free silent operation reed switch for power On/Off. Finished in Satin Black. Semi-Rigid Gooseneck shaft. For 'Glossary of Terms' Click Here Technical Length 500mm (19.7") Application Designed for use in conference halls, places of worship, broadcasting and paging systems. Type Condenser (back electret) Polar Pattern Cardioid Frequency Response 50 Hz - 18 KHz Sensitivity -40dB +/- 3dB at 1 KHz (0dB = 1 V/Pa) Impedance 200 Ohms S/N Ratio 64dB (A) Maximum Sound Pressure Level 125dB 1% THD Power Requirements 9 - 48 volts phantom power Termination Male 3 Pin XLR Supplied Accessories W2 Foam windshield included Finish Satin Black Dimensions 8mm (0.32") 1/2 Technical Architects and engineer specifications The Electret condenser gooseneck microphone has a cardioid polar pattern and slimline profile design. The microphone is constructed from high quality brass construction using 8.5mm semi-rigid shaft. Inbuilt is a reed switch to facilitate pop/click free muting of a microphone. The microphone is fitted with a phantom power adaptor accepting 9 to 48 volts DC and has an impedance of 200 Ohms. The phantom power adaptor also includes filters which will eliminate all GSM frequencies from 800-1200 MHz and is terminated with a male 3 pin XLR. Frequency response 50 Hz - 18 KHz , sensitivity -40dB +/- 3dB @ 1KHz (0dB =1V/Pa), total harmonic distortion (THD) at an operating level of 125dB less than 1%. The finish is low reflective Satin Black Microphone length: 19.7in/500mm Shaft diameter: 8mm ADDITIONAL IMAGES 2/2 Powered by TCPDF (www.tcpdf.org)